Re: Problem with Satellite A305-S6861 update

Similar Questions

• Problem with Satellite A200 BIOS update

  I recently installed the alert software from Toshiba - through it, I received an alert to install software to improve my Satellite A200 1GH.
  After installing this software I've probably updated the BIOS and now I could not the computer because he wants a password already from the bios.
  I do not managed any password before.
  Please help me solve the problem! Is there a possibility of losing information with this situation?

  Hello

  No you can not lose any information, but in your case I would check for a more RECENT for your system BIOS version because there are some discussions were that other users had the same problem.

  A user reported that a NEWER version has been released and the problem has been resolved, but you should check for it here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Otherwise, it would be necessary to set the machine to an authorized service partner. If you need a link to find the one closest to your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck

• Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Sorted now

• Quick BIOS problem with Satellite C875-10 t

  Hello
  I'm having a problem with Satellite C875-10 t my sister
  Thought it might be useful to enable the setting "fast bios.
  and this occuered be the worst idea to have!
  I am more able to again access the BIOS,
  Despite my cd penalty that no longer starts, I'll have to try it on another Pc to make sure that the cd is ok...

  Anyway, the computer runs windows8 and Toshiba hardware parameters that I downloaded does not (and was not done to w8 but seven times in fact... :/)

  I really need some help here and would really appreciate that someone of the Toshiba team would give me help on this!

  Thanks to you all!

  You can change it to normal mode again.
  Open the Toshiba system settings > BOOT > boot speed and change it to normal.
  Please do so and let us know if everything is OK again.

• Problems with a lot of updates to install. Message: I have no admin auth.

  Original title: Windows Win 7 update

  I have problems with a lot of updates install.  Reason code indicates that I don't have Admin Auth.  Trying to install every time I have re-boot

  I have finally figured out how to see if I were administrator or not... and I AM administrator.

• Anyone having problems with guides since the update?

  Anyone having problems with guides since the update?

  My guides are everywhere, since I updated my Illustrator last week. The guides are solid lines while they should be dotted (as defined in my preferences) when I'm zoomed out... and then disappear or become dotted but moved when I Zoom.

  It's so frustrating! I can't work like this!

  All the solutions out there?

  Thank you

  lyncylox,

  You can try to disable the GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU; You may also uncheck performance GPU in your preferences.

  I think that the issue should be fixed with the 19.0.1 patch.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

• What is the problem with Creative Cloud connection update

  What is the problem with Creative Cloud connection update?  I tried 25 times to update, but it does not work? Can you please help?

  Double-click on the creative process of cloud.  which opens another window that contains a button exit.

  or, click the process (to select) > click on view > click process to quit.  This method brings up a window that contains the two resignation and force them to leave (in the case of quit smoking does not work).

• Update the display for Satellite A305-S6861 with Vista (64-bit) driver

  Hi, I want to update the driver for my graphics card. Then I went [which | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2059349& rpn = PSAG4U & modelFilter = A305-S6861 & SelCategorie = 3 & selFamily = 1073768663 & selModel = 2059349% 7CPSAG4U] site and update the graphics driver was for Windows XP.

  I clicked on the download page link which was ATI Display Driver for Windows XP. Model of my PC was written on the list models involved, but my PC is not a version of Windows XP and don't have ATI Mobility Radeon HD 3650 (this graphics card was written on the driver installation Guide).

  I forgot this page and went to the site Web of ATI. I found driver chart download page which is: [link: http://ati.amd.com/support/driver.html]. Chose Vista 64-bit, Radeon and Radeon HD 3400 Series. I should _only_ download the file named "Catalyst Software Suite (64-bit)"? I thought, but I have not downloaded. Because the download that I found on the Toshiba site (that of Windows XP) was 148 MB and the download which is the site of ATI has been 62 MB. Don't know what to do.

  Note that there are 2 options in the ATI site.
  1 includes: display, integrated, ATI WDM driver Catalyst Software Suite (64-bit)
  2nd includes: 2 different downloads: driver of Download1:Display + Download2:Catalyst Control Center (32 bit)
  Which one should I choose (or they are the same)?
  1 pilot + integrated driver + software Suite
  2 - driver + Control Center?

  I use Windows Vista(64-bit) and I have ATI Mobility Radeon HD 3470. Where can I download drivers available for my system?

  Hello!

  Now I have a little confused after I read your ad m.

  If I understand correctly you are running Vista 64 bit and the Toshiba site you posted I also found drivers for Vista 64 bit.
  You can refine the search by Windows Vista 64-bit.

  I n t use drivers graphics they are not Toshiba because they don t have a thermal protection and therefore the graphics chip can be damaged.
  Then download the drivers of Toshiba.

  Good bye

• Satellite Pro C850 - problems with WiFi after Windows update 8.1

  Hello

  I was wondering if someone could give some advice on a problem I have.

  Had an adjustable C850 Pro for a few months and worked well on Windows 8.
  I myself am then harassed and intimidated by Microsoft Update in order to install Windows 8.1 and in a moment of weakness, I succumbed (got sick of the nagging).

  Since that time, my wifi is very intermittent; either I'm on another computer write this and the laptop is essentially not connected to the internet.

  For some reason any (although I didn't try it before), I can not connect via ethernet either, so I think it's probably the driver problems. (I also tried to connect the public wifi but fails).

  I tried to install the driver WiFi Toshiba 8.1 but that has not solved the problem.
  Then I noticed that I'm supposed to install a bunch of drivers in the order.

  Maximum setting to do it, but the first package (associated with bluetooth) said I have to remove the current driver... I try by "turning off", then "Uninstall" but 8.1 seems to re - install automatically and I don't know how to disable this option (I can try to delete the driver file, I guess, but I'm sure 8.1 covered too and will probably launch a drone to try me out ", if I do). *

  Any kind soul there suggestions on a way forward? Pls.

  I see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now. :(

  Hello

  > I don't see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now
  All your problems with the Windows 8.1 update related to the fact that you have not upgraded the Windows 8.1 system as recommended by Toshiba.

  Details:
  http://www.Toshiba.EU/innovation/generic/windows8_1-message/

  Solution?
  Back to Windows 8 (reset the system back to factory settings)
  Then, install all updates and patches for Windows 8 and follow along with the upgrade of system as described on the Toshiba Windows 8.1 upgrade page

  On the page of the Toshiba UE driver, you will find all the instruments that must be installed in the correct order and Windows 8.1 driver!

• Temporary solution to load problem with Satellite C650

  I here provide a temporary solution to loading with Satellite C650 problem, which I have faced.

  First of all, I've updated my BIOS. After that, I removed the battery and plugged AC for 2-3 minutes.

  Then replace the battery and it loaded.

  However, the battery got charged up to 99% only and after that the interrupted load and the load remained at 99% and renewed battery indicating "plugged in, not charging."

  Therefore, each time I hv to repeat the procedure above to charge my battery.

  If any1 has the solution to the prob. above, it would be gr8 to hear.

  Thank you very much!

  Thanks for your posting.
  To be honest I really don t know what else you can expect and test it with new battery.

  I think that your laptop model must always have a warranty valid, right?
  If so, contact Toshiba nearest service provider and ask for replacement.

• Still having problems with Itunes after music updated to iOS 9.3.2

  How can I solve the problems created by the software update Apple iOS 9.3.2 lost all my music will not restore using itunes etc

  What questions are you talking? Music of Apple, it's where you posted what you use? What music has been lost? It's all in your Apple's music. The rest should be in your iTunes library on your computer. I have almost 2K songs in my iTunes library and they have all been there since the very beginning, across all iOS and iTunes updates.

  What happens when you try to restore your phone to iTunes? What it the music has to do with whatever settings you have for music and once again, depends on your participation with music Apple or any other service.

  Try it please take a moment to build a question, describing what occurred, what device you use, what computer OS you use, and what troubleshooting steps you tried to correct. In addition, you use the services of Apple, and have you backed up your phone and your computer.

• I have problems with my games after update my iPad 2 to 9.3.2,and can anyone help?

  IS that what someone has problem with updated their 9.3.2 at ipad2?

  Yes.

• Problems with Satellite L755D-13V after reinstallation of Windows 7

  Hi all!

  I really need a support here. Im a kind a noob about PCs ;)

  I reinstalled Windows 7 on my Satellite L755D-13V (64-bit). After that, I have some problems with some drivers.

  (1) first of all SM Bus controller driver-free and I cannt find it on internet. I tried the "Hardware Setup" from toshiba support page. Had no results.

  (2) the VGA Graphics standard is listed twice, a gives a yellow "!" He says: "could not start (Code 10)". The drivers are up to date.

  (3) the wifi does not work. All the drivers are up to date but I cannt find a netzwork.

  Is 2) and 3) due to 1)?

  Please help me!

  hortab

  System:
  Windows 7 (64-bit)
  Satellite L755D-13V

  Thank you for a short return.

• Strange sound problem with Satellite L740 TV outputs

  I'm having a strange problem here... I googled this several times already, and I only found the same solution mentioned several times and the given solution * not * work is to me.

  I have a Toshiba Satellite L740 running Windows 7 Home Edition Premium, with a 64-bit Intel Core i5 - 2410M @ 2.30 GHz CPU and 4 GB of physical RAM. My problem is the following...

  There are two different TVs in my house that I regularly connect my laptop via HDMI cable.
  The first is mine, and I can get sound through the TV very well when I plug it in.

  Sometimes, however, I will disconnect the computer from my TV and not get any sound through the laptop because he's trying to output to external speakers to TV.

  More importantly, when I connect my laptop to my * roommate * TV (the same make as mine, you mind), I can not all the sounds of his TV at all.

  This is a recent problem. Until this morning, I was able to get noise from two TV very well and only sometimes had problems with sound through the laptop itself, which has been easily resolved by restarting.

  It's just a hunch, but it's almost like * doesn't realize that there are two different TVs * that it is connected to my computer. Maybe it's stupid, I don't know, but be it, it's frustrating...

  * ALSO: * I've seen dozens of suggestions that I put my HDMI audio as default device. Yes, I did. It wasn't the issue. Is the same to activate my audio drivers in Device Manager. They are all turned on, so it's not that either. Any ideas?

  It's a bit strange if you connect the laptop to two identical televisions and use the same HDMI cable to the TV.

  Unfortunately, it all works automatically and I put t know if you can force your laptop to recognize two TVs on the same path.

  In the worst case you have to do it manually in the sound properties > playback devices.
  If it works with four mouse clicks you can change.

  I tested my laptop with two different TVs.
  At home, I have a Toshiba TV and at the office we use Sony. On both automatically get sound on the TV speakers.

  If you will be able to find the solution please let us know.

• Serious problems with the 6.16 update: reboot page & chat

  First of all, I want to mention before, if there is no problem with Skype, it would make my computer all freeze where I by force to restart my system. If she didn't answer I could not force the program to close and would be forced to stop and start again.

  An hour or two there is something like it happened and so I restart my computer. Restart Skype updated during this time. When he came I went to my main group chat and it froze my computer, forcing me to do a hard cock down. For the next couple hours, it's the same thing. Even when I tried to disable my internet so I couldn't even open Skype. It is only now, 4 hours later that I am able to access Skype and the rest of the features on my computer, something I wasn't able to do.

  With this update, the display for the bubbles of text is not something I like. Timestamps are gone even if I still have the box checked to have these timestamps. I can't scroll to see previous messages and certain user setting have been forgotten or reset. I'm not happy about all of this change suddenly that I'm already rather on the fence with how much I love Skype.

  I'd like a way to return to the old interfaces without suffering a decline in quality with calls and video.

  The cat new UI is provided with the 6.16.64.105 version only. You can uninstall this 'special' version and install the 6.16.0.105 version with the old chat UI window.

  http://download.Skype.com/MSI/SkypeSetup_6.16.0.105.msi