Re: recover the power on pass

Similar Questions

• Pavilion g6: recover the power on pass

  I try to put on my laptop and a black screen
  opens with a blue box asking for admin
  password or power on password. The
  Passwords that I entered will not work. In any case
  to ignore it? my laptop model is hp
  pavalion g6 1100tx and the stop code is
  63096400 please help me tomorrow is my
  Conference presentation, you can also send me
  [personal information]

  Try to enter

  72994426

• Pavilion p7-1414: how to recover the power on password

  I forgot power on password, battery removed jumper & always starts, the power on password screen appears but date eg.mm/dd/yyyy started 2011, Help!

  Hello:

  Please see the link below (clear password settings), and there is incomplete instructions to clear the BIOS password.

  http://support.HP.com/us-en/product/HP-Pavilion-P7 - 1400-computer to desktop-PC-series/5295962/model/5297007/docu...

  These are the instructions changed to clear the password... they left a few steps outside.

  To clear the password BIOS follow these steps

• Pavilion g6: customer loses power on password and I need to recover the laptop - Pavilion g6

  customer lost power on password and I need to recover the laptop - Pavilion g6

  The disabled return code is = 63078592

  Hello

  Come in:

  72950514

  Concerning

• After the power failure during the restoration of the previous day, cannot enter os or passed the password even in safe mode.

  Have laptop Dell 8100, recently used out of town on a wireless remote, installed updates 47 system.  Upon return home, tried to change cable modem I used before purchasing a desktop computer.  I could not the laptop to work on internet.  So I restored system he choose 2007 too far back, then tried to restore someday, when restoring back to the Sunday I was untangle cords and press the power switch on the surge protector.  Now, I can't even in the system.  Go to the login password that I've ever had, my son has changed in 2002 from Tower to the yankees and protected by to keep his friend out of it, but I've never had to use a password he would always automatically functioning screen icons until yesterday.  The second problem the remote while the screen flashed occasionally and would be less bright black with very low juror I would turn off and cool and could use it later.  It happened when he was 6 months old and they replaced the screen.  In the research I found it eventually the inverter is not the screen and found where to buy however, I can not connect to my system now.  I don't want a new laptop, it has been used very little has everything I need and more photos.  My son who has put a password in 2002 died.  I want to return to my laptop, replace and/or to the inverter.  Need to travel to work.  Unemployed and own building company.  How to remove password?  I've never used a password and don't want everything.  Want to right back to my machine.  When asking my password it says field is no longer round.  Don't know what that means.  I know that he renamed Yankee, I saw that when updating.

  The notion of 'Password' is to prevent any attempt to usurp the security it provides. If there is a quick and easy way to circumvent or to usurp the password protected system, then it would raise the question, what should a password?

  I'm afraid that if you've exhausted all the possibilities and are unable to find/recover your password, you will need to reformat the hard drive and reinstall the operating system.

  The Microsoft policy about lost or forgotten passwords .

• Satellite 5100: Driver CD does not work to recover the operating system

  My laptop Satellite 5100 did not work today. The whole system broke down, and I can not open any program. I want to recover my system but my CD driver does not work, I can not use the recovery CD to run the system.

  What should I do? Can I replace a new CD by myself? Is there another way to recover the system without the CD driver?

  Thank you very much and I look forward to hear from you.

  Hello Bingping :D (Lazy nickname)

  Well, first of all you are sure that the drive is dead or it of just not possible to boot from the recovery CD?
  Press the C key immediately after booting laptop (by pressing the power button) to boot from the CD drive.

  If it doesn t work so try to boot from the original Windows CD. Perhaps the Toshiba Recovery CD is damage. But if it is not possible to boot from a CD so I would say that the reader has a malfunction.

  Of course you can replace the car yourself. It of not very difficult, but you must be careful. Not every drive is compatible. The caught player support, you can order the Toshiba ASP in your country.

• Satellite A500-19U - games crashes after 3 Min then only connected to the power adapter

  Heys guys. I got my new Satellite A500-19U and install it on some games like COD4, Batman, Assasin Creed and many

  All of these games crashes & freezes after 3-5 Min & gimmea the screen black or white and everything happens while pluging adapter to recharge. When you use the battery, it crashes too, but it takes a long time. Some time, he said (the display driver not responding) & sometimes the screen black or white. The only way to recover the laptop is ALT + CTRL + DELETE and kill the game processes.

  The only one that works such fine bit is Battlefield Bad Company 2. Then I change the DirectX (setting.ini) of car in DirectX9.

  SP please any help on this matter. I think it's a video driver or a Windows 7 problem. And the specifications are:

  Processor: Inter Core 2 Due P7450 2.13 GHz
  RAM: 4 GB DDR3
  VGA: Nvidia Geforce G210M [with the driver from Toshiba Site]
  OS: Windows 7 64-bit

  SRY 4 my English: $

  Hi Storm2005,

  A 64-bit Windows 7 preinstalled on this notebook or install it yourself?

  In my opinion, you should check the cooling options in Windows power management. Make sure that it s set for maximum Performance. This means that your laptop will be cooled as much as possible.

  I put t know how long you have this laptop already but maybe that cleaning is also an option.

• Satellite P500 - how to recover the BIOS?

  Hi all

  Has someone any direction to recover a P500 with corrupt BIOS (starts and beeps but screen blank and fails to load OS)?

  Thos occurred after a failure WinPhlash updated fronm the Toshiba support site.

  I note a certain activity CD/DVD rom on andFn power + ESC seems to have an impact if help down while turning the power on, but I need to know what files to download and put them on a CD or a USB flash drive. Welcome Guide.

  Just in case where the model is a PSPE8A-025002.

  Thanks for your possible suggestions.

  Rob

  Hey,.

  BIOS recovery is not possible and it can only be done from an authorized service provider. The guys have to reflash the ROM module with special tools and need a special version of the BIOS for this procedure.

  You can find a list of aspic here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  I know that it s not the easiest way, but you n t have other options ;)

• How to recover the Satellite A100 without recovery disk

  Hi all

  I'm trying to restore my laptop A100 settings * without * a restore CD via pressing a sequence of buttons during startup (which must launch the recovery on the hard drive partition).

  It is really unfortunate, I know it can be done as I did before butI for the life of me forgotten what was this key sequence I can't find the article I stumbled initially on!

  I've scoured the web looking for this key sequence and all the proposed solutions, I fell on do not seem to work.

  Unsuccessful attempts so far:
  -Press and hold 0 power
  -various suggest 'F' keys: F1, F8, F10
  -now the delete key

  Note: I guess it may be worth mentioning that pressing F8 actually take me on-screen "start options advanced windows" but I don't have any recovery options.

  Yeh Yes, I'd * extremely * grateful if someone could point me in the right direction here because it makes me crazy... the fact that I've done this before, it that much worse!

  Post edited by: Atta

  > I'm trying to restore my laptop A100 to the factory without the recovery CD settings via pressing a sequence of buttons during startup (which must launch the recovery on the hard drive partition).

  As I know the A100 series has not been fitted with the recovery of HARD drive partition!
  And so I doubt that any combination of keys will start the partition recovery!

  So you only chance to recover the laptop is to take the recovery disk, then boot from it.
  You can also try to install the disk Microsoft Windows operating system and then could install the drivers of Toshiba on the pilot site of Toshiba!

  See you soon

• Turn off the power of airplane Mode?

  Hi, I have a T440p and it seems that the package dependencies of parameters Auto-setting Lenovo updated sometime in the last few days. Since then, whenever I pass in airplane mode to disable Wifi, energy mode gets automatically changed. Is it possible to disable this? The release notes say "added the registry settings to disable the functions of automatic detection of the power plane Mode." If someone knows where is this registry setting?

  Thank you.

  http://forums.Lenovo.com/T5/W-series-ThinkPad-Laptops/W540-charging-bug-WiFi-off-no-charge/m-p/14982...

• Want T15 - J100 Quad Edition Tou: recover the BIOS of the laptop using an external storage device

  So, from the start of my screen is empty and Caps Lock flashes 2 times.  I tried the Windows key + B + power key without success as indicted here:

  http://support.HP.com/us-en/document/c02693833?JumpID=reg_r1002_usen_c-001_title_r0003

  I tried to recover the BIOS with an external storage device but HP's Software and driver download page does not have BIOS updated.  I've updated for Windows 10.

  Where is the BIOS update that is supposed to be here? :

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-15-J100-Quad-Edition-Notebook-PC-series/6521...

  This model seems to have a lot of problems with what I find it everywhere on the internet, but the solutions all return to the download of the update of the BIOS.  I noticed that I can download an update for Windows 8.1.  Are there not one for Windows 10 yet?  Can I use the 8.1?

  The BIOS in the list of drivers of Windows 8 is the last exit for your model. You can use it regardless of the operating system because the BIOS recovery is run outside of Windows.

  BTW-to help the Windows key + B keys. When you press and release the power button / continue to hold the buttons for a few seconds see if BIOS recovery screen appears. I know that it is different from the document - but try it.

• Try to connect to the power supply via the IP address

  Hello

  I am trying to connect to a power supply of Sorensen XEL60 - 1.5 P. I have its IP address and port number, but I'm stuck on an error 63, cited at the end I tried the advice in this forum and online without success, including:

  Disabling firewall

  * the ip address ping command

  * Tools > options > VI Server

  http://digital.NI.com/public.nsf/allkb/6ccced1045c479d286256a3a00655123

  Open all the ports LV wants

  Nothing improves the situation. What I will try?

  Thank you very much

  

  Error 63:

  LabVIEW: Serial Port receive buffer overflow.
  =========================
  LabVIEW: The network connection was refused by the server. For TCP/IP, make sure that the server is running and listening on the port you want to use. Firewalls can also cause a server to refuse a connection. To VI Server, make sure that you have enabled the server from VI tools > Options > VI Server.

  No reason to be a donkey to people asking for advice. I tried UKRAINE by the boards, conscientiously the profit and loss account.

  I can actually get the power supply to operate on the VISA. It needed fixed two bugs, in the case where others are interested:

  * Setting VI_ATTR-TERMCHAR_EN to VI_TRUE

  * Creation of the resource VISA under the 'manual entry of the raw socket"rather than one of the other two. This is necessary because I'm trying to communicate via a specified port.

  So I'm fine now, I just can't pass strings directly via IP and port that I thought I should. It may be a device-specific problem, but I'm always interested in other thoughts.

  Thank you

  Warren Harding

• Pagefile.sys has completely disappeared. It started when the power failed and my computer crashed.

  My pagefile.sys has completely disappeared. This all started when the power failed and my computer crashed.
  I get the message that he was away, I went to the performance and settings and tried to change custom settings & re-start.

  No matter what I do, nothing works. I lost several hours of visiting sites for tips and nothing seems to help.

  I was told when re-boots WinXP it creates the new file pagefile.sys and I should delete the pagefile.sys file may be corrupted on the C drive.

  So I put the folders to show hidden files and delete pagefile.sys. I have re-set and tried to recover with no success.

  There is now absolutely no pagefile.sys on my C drive. Anyone know how I can get back my pagefile.sys?

  I want to get my virtual memory works again?

  Thank you very much in advance!

  I'd start first with the chkdsk/r.

  Don't forget - if you have a factory installed recovery Partition, fixmbr will scan it as the Master Boot Record that written XP will equal not the MBR installed by the factory, so first run chkdsk /r (did I say that already)?

  Here are some instructions:

  http://pcsupport.about.com/od/fixtheproblem/SS/RCONSOLE.htm

  Where people have no XP bootable media, here are my instructions:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• XP freezes at startup then begins after the power is turned off and on again

  After a windows session and wait that my computer close, I usually turn the power off to the outlet.

  Upon restarting, the computer hangs on startup controls and can be recovered in closing with its power button press again to restart.

  The ideas people?

  I guess that if you leave your computer plugged into the wall - IE do not activate deactivate the plug - you do not have these problems?  If you turn off your computer by unplugging from the wall, the computer comes back on the motherboard battery to retain the BIOS settings (and keep the time as well).  These symptoms may be a sign of a low battery or motherboard failure. On the first power cycle, it attempts to recover the BIOS settings, and the second power up then maybe succeed.

  Check your motherboard battery.

  HTH,
  JW

• I lost the hybrid sleep on my laptop Vista Home Premium. The controls reveal that it is because of VGA files and or legacy (that they) what should I do to recover the hybrid sleep please

  I lost the hybrid sleep on my laptop Vista Home Premium. The controls reveal that it is because of VGA files and or legacy (that they) what should I do to recover the hybrid sleep please

  Allow hybrid sleep is turned on? :

  How enable and activate standby hybrid under Vista
  http://www.mydigitallife.info/how-to-enable-and-turn-on-hybrid-sleep-in-Vista/

  Missing or not found allow advanced settings of hybrid sleep in Vista Power Options
  http://www.mydigitallife.info/missing-or-not-found-allow-hybrid-sleep-in-Vista-power-options-advanced-settings/