Re: Satelite Pro - 1 5 - C850 peripheral unknown - ACPI\TOS6205

Similar Questions

• What is peripheral unknown acpi\wec0515

  in windows xp Device Manager as unknown device-properties-details-hardware id is acpi\wec0515. What is this device. I need drivers.

  Sony Memory Stick Controller or?
  http://members.DriverGuide.com/driver/device.php?HWID=ACPI%5C * WEC0515

• Portege R700 - peripheral unknown in hardware

  Hello

  Win 7 Pro, after installation clean (I installed all the drivers Toshiba again), I have 2 unrecognized currencies left.

  1 a:
  AuthenTec Inc. AES1660
  Location: Port_ #0002.Hub_ #0003

  It works fine, but no driver is shown and it is not recognized by windows.
  Yes, I installed drivers for the fingerprint and Touchpad.

  2 a: unknown device
  Other devices
  on system compatible ACPI Microsoft
  The drivers for this device are not installed. (Code 28)

  Details: ACPI\TOS6205
  * TOS6205

  Any ideas? Thank you!

  The first should be fingerprint sensor and a second module BT. If you have installed BT stack installation activate BT (FN + F8) to complete the installation of the BT module.

  To be honest I n don't know what is wrong you but here's the Win7 installation order. All the things listed must be installed in this order:

  Win 7
  USB3.0 Driver 1.0.20.1
  Driver USB-Serial 1,00,000
  TOSHIBA Assist 4.00.00
  Security TOSHIBA Assist 2.0.8
  TOSHIBA Bulletin Board 1.6.08.0
  TOSHIBA ReelTime 1.6.06.0
  Infineon TPM software professional v3.60.2071.00
  SW 9.1.1.1024 Chipset installation utility
  Intel Management Engine Interface 6.00.40.1215
  Intel AMT 6.00.40.1215 software
  Driver Intel 8.15.10.2125
  Driver Intel Rapid Storage Technology 9.6.1.1001
  Realtek Audio Driver 6.0.1.6083
  Driver Intel LAN 14.8.3.6
  Synaptics Touch Pad Driver 15.0.12
  TOSHIBA value added package 1.3.12_64
  Ricoh 2.08.03.04 card reader
  Wireless LAN driver
  ConfigFree 8.0.30
  TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 7
  TOSHIBA Fingerprint Utility 1.0.2.27
  TOSHIBA Web Camera Application V1.1.2.13
  3.1.3 TOSHIBA face recognition
  Bluetooth Stack for Windows by Toshiba
  TOSHIBA eco Utility 1.2.12.64
  TOSHIBA HDD_SSD 3.1.64.6 attention
  TOSHIBA HDD Protection 2.2.0.4
  TOSHIBA Service Station 2.1.40
  TOSHIBA PC Health Monitor 1.6.2.64
  TOSHIBA Sleep 1.4.1.3 utility
  TOSHIBA Disc Creator 2.1.0.2 for x 64
  TOSHIBA Media Controller 1.0.80.7
  TOSHIBA Media Controller plugin 1.0.5.10
  UPDATE2 PCIIDEREG - 1.1
  Update3 FixFPService_REG_1.0
  Update4 TosVolRegulator_x64_1.1

• Satellite C850 - 19(d) - unknown device ACPI/TOS6205 Windows 7

  I am a unknown device in windows 7 on a toshiba Satellite C850 - 19(d).
  The hardware ID is ACPI/TOS6205.

  Suggestions of Al in the forum and the net did not work:

  It is not bluetooth: the two drivers in the drivers download page, none has solved the problem:
  [t 72426]

  HDD/SSD Alert Utility and PC Health Monitor installation because of the suggestion that he had a problem with HDD Protection Utility:
  [m 201203]
  [t 53498]

  Can anyone help with this?
  Thanks in advance

  Hello

  The ACPI/TOS6205 seems to be the Bluetooth device.
  Satellite C850 - 19(d) was equipped with a Realtek RTL8188CE - VLSA WLan / Bt combo card.
  That's why I m sure its BT device.

  You said that you have installed the driver BT but it didn t work.
  I think that you did it wrong.

  The point is that WLan / Combo cards needs a filter driver BT package.
  IF you need to install: Realtek WLan driver, then driver Realtek BT filter package and, finally, the battery Toshiba BT.

  Welcome them

• GANYMEDE + peripheral unknown network or Client AAA package

  Hi all

  I can do connect using the set of credentials to the ACS server, log it showed:

  "Reason for failure: 13017 receipt GANYMEDE + peripheral unknown network or Client AAA package."

  I know there are a few changes on GANYMEDE + room for new catalyst IOS, so I consult the guide and it is the end of my config:

  AAA server Ganymede group + TAC_PLUS

  the AUTH server name

  RADIUS server AUTH

  ipv4 10.10.21.251 address

  key xxxxxx

  AAA TAC_PLUS authentication connection group Ganymede + local line

  TAC_PLUS AAA authorization exec group Ganymede + none

  AAA authorization commands 15 default authenticated if

  accounting AAA periodic update 1

  exec accounting AAA TAC_PLUS start-stop group Ganymede +.

  network accounting AAA TAC_PLUS start-stop group Ganymede +.

  connect accounting AAA TAC_PLUS start-stop group Ganymede +.

  My platform is

  -C6500 running on IOS 12.2 (33) SXJ1

  -ACS 5.2.0.26

  Need advice on this subject, thanks

  Noel

  Hello

  What is IP IOS appropriate set to network devices and the AAA Clients for the candidate countries? If Yes, what IP address is indicated on the failure of the ACS that includes the error "GANYMEDE + unknown cover peripheral network or Client AAA? ACS reports as unknown IP address when it is already set appropriately?

  Kind regards.

• Qosmio X 770-bar safety edge and peripheral unknown

  Hello

  a week after the purchase, I decided to replace the OEM Windows 7 Home Premium to Windows 7 Professional.
  (I am a student and I need the professional version). Everything works perfectly except the safety edge. With the Windows OEM, it worked fine, but still it no longer responds.

  When I open the Device Manager there is an unknown device. (Details: ACPI\TOS6205) I don't know what it is.

  I hope I explained my problem properly. English is not my mother tongue...

  Thank you

  Hello

  With edge, you mean the buttons illuminated on your laptop, right?
  Well for these buttons, you need to install Toshiba Value Package added that you can download from the Toshiba driver download page. This package contains drivers for the illuminated buttons, FN keys, etc. then you need to install it:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  ACPI\TOS6205 must be Bluetooth device then install the software portal BT BT:
  http://APS2.toshiba-tro.de/Bluetooth/

• Satellite Pro C850 - peripheral Audio not installed

  Satellite Pro C850, suddenly had res cross on its icon and no noise. Says the audio device not installed. Have tried deactivation/activation and also updated, no joy.

  Can anyone help?

  Fixed it, to download a driver.

• Satellite A200-1The - peripheral unknown in Device Manager

  I have the suite listed under question marks in my device manager:

  ? Multimedia controller
  ? Network controller
  ? Unknown device

  I installed the sound and it works
  I installed the network card and it works

  What are the above devices?

  Stand by. Which operating system you are trying to configure?

  Have you checked on the Toshiba download section if the installations Instructions document is available? If you follow this document you will install everything you need and everything will be OK.
  Anyway, multimedia controller can be peripheral multicard reader, network controller is probably wireless card. I can't say what unknown device because I know not what drivers you have installed.

• HP Envy 15-J104el: Periferiche sconosciute knew HP Envy 15-j104el - peripheral unknown

  English:
  These are the unknown devices:
  http://brain89.altervista.org/Periferiche_sconosciute_HP_Envy.PNG

  I have Windows 64 bit Pro 8.1 and connected to my laptop it is just a USB hub, a mouse and a keyboard that works perfectly

  Italian:
  Salvo sewn questo post in merito ad a problema del mio HP Envy 15 - j104el, this sound system 2 periferiche sconosciute ed una che funziona not correctly, ecco uno che screenshot makes meglio Torino
  http://brain89.altervista.org/Periferiche_sconosciute_HP_Envy.PNG
  You can help a risolvere?
  Ho 8.1 Windows Pro 64 bit e periferiche pc sono hotels al con UN hub mouse e una tastiera perfettamente rilevati e funzionanti.

  Hello @Matrix89,

  Thanks for the quick response!

  Try to review the following resource and let me know if you have a bit of luck:

  How to find drivers for unknown in Device Manager devices (Not a HP website supported).

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• ProBook 4530 s: ProBook 4530 unknown peripheral s ACPI\HPQ0004\3 & 21436425 & 0

  Hello!

  I have a s ProBook 4530 laptop.

  After you install 64-bit Pro 10 Windows I have an unknown device:

  ACPI\HPQ0004\3 & 21436425 & 0
  I need a driver, but I find it on the HP support web page.

  Thanks for the help.

  Sandor Turi

  Go to Device Manager and click on the unknown device 0004 requiring the driver.

  Click the driver tab.

  Click on set to update driver.

  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp64144.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart the PC.

  I know this is the driver you need, because here, it is a partial copy and paste of the setup information file driver that shows support for the drivers for the hardware ID you have posted.

  [HP.ntamd64]
  DeviceDesc % = HPAccelerometerDriverInstall.ntamd64, ACPI\HPQ0004

• P 8470 & HP HP 8440 P: upgrading to W10 Pro 64 bit / device Reporting - unknown device manager

  I have recently upgraded to Windows Pro 64-bit 10.  Machines involved are - 8440p & 8470p running W7 Pro 64-bit.

  The Device Manager shows an unknown device - ACPI\HPQ6000\3 & 33FD14CA & 0.

  Could someone tell me what this is in reference to.  Perhaps point to a driver that I could update.

  Thank you / / Jeff

  You are the very welcome.

  The reason why you don't see the driver is because most of the drivers are missing in support pages, which have not worked directly for HP split into 2 companies from 1 August.

  This is certainly the driver you need.  If the version of W7 works, I can't say.

  See if it works.

  FTP://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59282.exe

  If this driver does the same thing...

  Go to Device Manager and click on the unknown device of 6000 who need pilots.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option, then at the bottom of this window, let pick me from a list of drivers for devices on my computer.

  Click on disk and go to C:\SWSetup\sp59282\accelerometer and select the HP Mobile Data Protection sensor and see if the pilot goes like this.

  Here's a partial copy and paste of the accelerometer installation information file.

  As you can see the device is supported by the driver.

  But it's the most recent driver is there, I know.

  [Manufacturer]
  Mfg % = HP, ntamd64

  [HP.ntamd64]
  DeviceDesc % = HPAccelerometerDriverInstall.ntamd64, ACPI\HPQ6000

• Portege A600 - peripheral unknown after Windows 7 installation

  All the g ' Day.

  I've got an A600 (original Vista) I recently installed Windows 7 Professional 32-bit (reformat/reinstall). I was careful with the installation order. All right except the built-in camera does not work and there is managing an unknown controller PCI Communications Simple in the device. Without a doubt, the two are linked.

  I tried to reload the drivers for the chipset without result. The unknown device is bus PCI 0, device 3, function 0. Is it possible to determine what this device is so I can find the missing driver?

  Hey Buddy,

  Can you post the vendor and the device of this unknown device ID? It would be useful to identify it.
  => [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]

  But the PCI communication controller could mean the webcam in your case I would try to install the driver for the webcam of the official website of Toshiba. After installation, you should be able to start the webcam software, and use the webcam.

• Install Win 2000 on Tecra S2 - peripheral unknown

  Hello

  I try to install win 2 k on my Tecra S2.
  I have download all the drivers and I have read the order of installation, but now I have an unknown PCI device.

  I try to check all devices such as:
  -Modem
  -Lan card
  -Wireless network card
  -Card bus
  -Audio

  etc etc (including the irda driver, mobile extension, power save the driver driver touchpad...)

  I also try to re install all the driver but I ' have already the unknown PCI, the only factor device that I have not installed is the Bluetooth.

  Please can someone help, please

  The only solution for you to find your way through this download one
  Freeware called "Unknown device identifier" of this site: http://www.zhangduo.com/udi.html

  This program will allow you to easily locate the correct device description as well as the
  pilot coresponding.

  Hope this will sort things

  Concerning

  chain

• Equium L10: Windows Vista Beta2 - peripheral unknown

  Hello

  I have a Toshiba Equium L10 with Windows XP loaded as default but I installed VISTA Beta2 "public dissemination" on this issue and because it is only 1.5 GHz Celeron CPU with 512 MB of RAM, it worked fine, but I have a problem that I hope I can get help with users in this forum, and especially those who have the same or similar Equium model as I have?

  Okay, after VISTA installation, I checked in the Device Manager and noticed "unknown device". After checking the info given in its properties, I've detailed below:

  Geographical area: ACPI Microsoft compatible controller built-in
  Value: ACPI\ACPI 0001 * ACPI0002

  When I reinstalled XP again, I went to the Manager of devices/batteries/Microsoft SMART Battery, the entry for Microsoft SMART Battery subsystem 'ACPI\ACPI0002\6 & 28CA 2229 & 0'.

  Notice the "ACPI0002" info given for the "unknown device" in VISTA is the same info given for "Microsoft SMART Battery subsystem" in Windows XP. So I'm left wondering if the unknown device Vista is Microsoft SMART battery subsystem and if yes, why VISTA installed the driver for it?

  Can someone help to find a driver for the "unknown device" in VISTA?

  Concerning
  Brave

  Hello

  The unknown device appears because the driver is missing.
  Unfortunately, at this time you will not find any what Toshiba supported drivers for Beta 2 of Windows. It is a beta and not official version on the market.
  I think that if this OS will be official, supported so you will also find the necessary drivers.

• Satellite L500D - peripheral unknown listed in Device Manager

  Hello world

  I have a Satellite L500D and in other devices under Device Manager, I have unknown device listed. I installed all the drives listed on the Toshiba page without success, anyone had this before and if so please can you me how to fix it.

  Can you please tell us what OS you are using?

  Anyway, how to identify an unknown device in Device Manager, you can read here
  http://APS2.toshiba-tro.de/KB0/HTD0302U00000R01.htm

  Please, check and send comments.