Satellite Pro C660-2JN cannot start Windows - status: 0xc00000e9

Similar Questions

• Satellite Pro C660 does not start, no screen

  Hi guys I was wonder if anyone could help please.

  I have a Toshiba laptop Satellite Pro C660 - 2 DR who seems to be defective (just out of warranty).
  Everything worked fine until we came to a morning market and found that the screen remains off (black screen). There are no output through the VGA as I tested it on an external monitor.

  The CPU fan turns for a few seconds and then turns off.
  There is no noise from the hard drive read/write either. The power light stays on. I removed the hard drive to access data on another system that worked Fortunately

  . I also removed the RAM, battery and optical drive, but there is still no output to the screen.

  Is it sounds like a faulty motherboard?
  The laptop seems to be in excellent condition.

  Is there something else I can try please? I would be very grateful for any advice.

  Rich

  Yes, it looks like the faulty motherboard or a part of the motherboard as RAM or CPU.
  You said that you have already removed the RAM, but have you used a good RAM module tested?

  Theoretically, it could be just a problem of RAM but in the worst case, you will need to replace the motherboard and I think it would be really expensive repair.

• Satellite Pro A300-1E7 - cannot start the cam software

  I bought the Satellite Pro A300-1E7.
  Webcam does not work in MSN messenger video call.
  Will have problems similar to the previous posting, except that I use Zonealarm.

  I think that Zonealarm has disputed cec_main.exe in a similar way.
  I tried to follow the instructions here, but without much success.
  I removed the Camera Assistant SOftware and re-installed the driver but does not seem to have improved things.
  Now c:\program files\ software of camera for Toshiba assistant has completely disappeared and the Panel camera assistant no longer appears on the side of the desktop.

  Any ideas please?

  Hello

  I used the Zonealarm happened and I was not really satisfied, because this software locked everything and most of the applications didn't work properly even after the new configuration! Finally, I removed this software and I noticed more advantage. my laptop starts much faster!
  I think this software would lock the cam software too.

  > Now c:\program files\ software of camera for Toshiba assistant has completely disappeared and the Panel camera assistant no longer appears on the side of the desktop.
  This means that the software has been removed and is not installed correctly.
  But to be sure, check in Control Panel-> Software (Add & Remove Programs) if the webcam is installed.

  I have the internal cam of Chicony too and it s works well as part of the software Skype. I didn't test t MSN but I don t see serious reasons why it shouldn't t work.

  In my view, you must first remove the zonealarm. Then clean the OS using CCleaner. Finally, redownload the webcam software and reinstall it!

  The toolbar of the webcam is not always visible on the desktop.
  It seems that if you move it the mouse cursor to the place where the webcam tool bar was hidden.

• Satellite Pro C660 - 1 9 - starting problems

  Help!

  Had problems using some online sites, so decided to restore the factory settings. This is where my problems started!

  Using the Message Center of Toshiba (I think they call it) which is already on the laptop... I tried to restore the laptop.

  Immediately I pressed this button, the laptop froze.

  Now I can't start with windows.

  I rebooted-

  Removed power cord and battery and power button button for 30secs... then attached to all parties and tried to start the laptop... and...

  I start the Toshiba up... .saying that I can use F2 or F12... then...
  nothing but a black screen / gray...
  and I can see my cursor... but nothing else.

  No matter how many times I reboot... I get just "Windows Error Recovery".
  If I try
  a. launch from repair (recommended)
  or
  b. manually start Windows...

  * Nothing happens! *

  * Is there a Knight in shining armor who can help you with the English girl? *

  If the recovery of HARD drive does not work as posted by Feliks, then you should try the recovery using the recovery disk Toshiba did you create this disc in the past?
  If not, you can order the CD here: http://backupmedia.toshiba.eu/landing.aspx

• Satellite pro A120-151 - cannot start more HARD drive

  I removed the laptop HARD drive to copy files on the master pc because of the virus. The problem is when I put the HARD drive to the laptop, I can't start windows. It comes up with the usual start screen. The 1st BIOS password: I entered and I press on and get said its CERTIFIED.

  But just, it is there and don't do anything else. I then rebooted from CD so I can access the HARD drive, the HARD drive is ok and connected. I went into the BIOS and put the password password BIOS and the HARD drive. Returned to enter my password and got the message saying.
  CERTIFIED, HARD DRIVE HAS BEEN UNLOCKED

  Yet once it is just what I can do?

  Hi mypcclean,

  Maybe you have the virus on your laptop and so, you can start t more?
  This would also explain why you can access the HARD disk with a bootable disc.

  I doubt that's a problem with your laptop, I think that you need to reinstall Windows. You can take a Toshiba Recovery disk to reinstall Windows.
  Check it!

• Satellite Pro L650-1LF - cannot connect Windows 7

  Hello

  I'm having a problem with my new Toshiba laptop and I thought that maybe someone here could help me. Sorry for my bad English: P

  My problem is that when I start my laptop (that I got today) I can't connect in the two options I have. There is the administrator account which acquires a password that I did not and do not know. the second option is "another user account", but it still says that I have the account user or incorrect password. I don't know what to do :(
  I hope you people understand my problem and can help me. 7 Professional Windows was already installed when I bought the laptop in an internet shop, so there are no cd or other software with it.

  Thanks for your help and I hope you have understood my problem :)

  Hey Buddy,

  You have created user accounts after installing Windows 7? Usually, if you buy a new laptop, recovery facility will be beginning and end. Then, you will be asked for user accounts and passwords.

  Anyway, an alternative you can try reinstalling Windows if no connection is possible. Just run the recovery of HARD drive feature (menu advance to boot Windows if you press F8, and then select Repair my computer).

• Satellite Pro C660 - what drivers should I download?

  Hi - my C660 Pro Satellite died last week. We have replaced the hard drive, but I don't have the recovery disks. We were able to load Windows 7 but now we need to load the drivers. I found the page download drivers.

  Sorry its naïve but

  1 should. what drivers I download?
  2. How can I when my Toshiba can't connect to the internet.

  Thanks in advance

  > 1. Should what drivers I download?

  Download and install any Satellite Pro C660 drivers for your Windows System. In case you are using Win 7 32 bit, download Win7 32-bit drivers

  > 2. How can I when my Toshiba can't connect to the internet.
  I guess you are able to access the internet because you have posted here in the forum.
  So why you n t download and store all the drivers on a USB key where you could launch the driver installation.

• Satellite Pro C660 - 24 k: Webcam/Microphone and interface issues

  I went on Skype to talk and I found that it could not detect a webcam, and the other person couldn't hear my voice. I checked Device Manager and no imagery or recording device has been found.
  The camera and microphone are integrated. They have worked before.

  There is another problem that may be related. When I got the laptop, when I pressed the fn key, a bar at the top of the pop up screen would be who showed me what did all the various f keys. It no longer appears.

  Also, when I got the laptop, if I plug headphones or an external mic into the line out Sockets, a pop-up message would be. In this case no longer, and the laptop is not receiving any input headphones I plug into it.

  I tried to reinstall the drivers of webcam, but in vain. According to Device Manager there is no. If this were the only problem, so I can put down to damage, but other problems give me a feeling it has something to do with a kind of software can I have accidentally disabled or deleted, which exercises control over the webcam/mic and the line output, which also produces pieces of UI such as the fn key.

  I can't identify a moment when it stopped working I barely noticed the webcam and the microphone does not work as I them haven't used for a while. I noticed, however, how pressing the "fn" key is no longer shows the respective information on the screen.

  Model: Toshiba Satellite Pro C660 - 24 k
  OS: Windows 7 64-bit

  > There is another problem that may be related. When I got the laptop, when I pressed the fn key, a bar at the top of the pop up screen would be who showed me what did all the various f keys. It no longer appears.

  The menu of the FN button that appears just by pressing the FN key combination is controlled by the Support of Flash memory card utility.
  Try restarting this software located in all programs > Toshiba-> Flash Cards

  If this does not work, reinstall the Support of Flash memory card utility.

  > Also, when I got the laptop, if I plug headphones or an external mic into the line out Sockets, a pop-up message would be. In this case no longer, and the laptop is not receiving any input headphones I plug into it.

  It seems that the laptop supports the Realtek audio chip. That is why the Realtek HD audio Manager must be preinstalled and placed in the Panel.
  Go to the dashboard-> Realtek HD audio manager
  In the upper right corner, there is a small yellow folder called "Connector settings" in my version.
  There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged.

  I m not sure about the question of the webcam... perhaps that the system is confusing the Skype upwards and face recognition software uses the same cam then perhaps you should uninstall the software for the webcam, Skype and a face recognition software and must restart the laptop. After the software installation of webcam, facing new to Skype and recognition software.

• Satellite Pro U400 starts not-cannot start Windows

  So I have no idea what caused this minute, it's nice, I look at things on the next screen thing 4od is empty and not coming back so I hold down the power button to restart and a black "windows boot manager" is displayed and I can not fundamentally get off this page...
  It is said:
  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windowsinstallation drive and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on 'Repair yourconputer.'

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
  File: \Boot\BCD
  Status: 0xc0000034
  Info: the windows boot configuration data file is missing required information.

  I do not have installation or recovery discs, I used another computer to burn a disc recovery ISO put it in and nothing happened.
  I would like to ring toshiba but I don't have any minutes left this month and I don't have access to another fixed telephone/phone

  I'm really confused as to what to do, each other times as my laptop is messed up, I just did a recovery of hard disk and restored to factory settings by clicking on f8 but it doesn't work this time

  I can't afford a new laptop or taking it to be repaired so if anyone knows what I can do please help!

  Thank you
  Steph.

  Post edited by: Steph92

  Oh I forgot to tell my computer toshiba laptop satellite pro u400
  It came with windows vista preinstalled

  Hello

  I think it is just a software problem (Boot Manager).
  Try to repair the operating system by using HARD disk recovery;
  Press F8 why portable power.
  Then choose fix my computer, then choose disk HARD recovery.

  If this is not possible, order the disk recovery from here:
  http://backupmedia.Toshiba.EU/landing.aspx

  Then, you will be able to reinstall the OS using the recovery disk

• Satellite Pro C650 - cannot start Windows more

  I have a Toshiba Satellite Pro C650 11Z model under Windows 7 Home Premium. I'm not very savvy computer. I can use my computer to perform tasks and use the software, but I m not very got when it comes to computer and tinkering under the hood, somehow.

  I was using the laptop yesterday evening to watch a You Tube playlist and was downloading a PDF 29MB file in the background. I have done this kind of thing before and never encountered any problems.

  When the download finished (I use Google Chrome) I clicked the button at the bottom left of the screen to open the download. You Tube then frozen.

  I could see the little green circle spinning around like loading upward download, but nothing was happening. Then Google Chrome no longer according to the bar at the top of the window.

  I tried CTRL + ALT + DEL, but the workload Manager wouldn t. The only thing I could do was turn off the laptop and running again, as it had frozen him completely. When I turned on it again, I had the Windows error recovery menu as shown in the following image.

  http://www.TechJaws.com/wp-content/uploads/2010/03/Win7-error-recovery.PNG

  The problem is that none of these options does nothing. If you choose the recommended option (for example Startup Repair) it comes up with the gray bar saying Windows loads the files and then will just a black screen. By selecting Start Windows normally gets you to the swirling colorful circles that make up the logo Windows and he said: start Windows but still once, it does nothing but just stick to that.

  A friend told me that a BIOS reset * may help. However, I don't know how to get the BIOS on the laptop. He called Insyde H20 installed and I don't see the option to access the BIOS.

  Someone at - it ideas as to what could have wrong and how can I fix? I don't have a recovery disc as my laptop was bought for me by a charity. The warranty has expired now so that I can contact t their support line.

  To be honest I don't think BIOS has nothing to do with it. Start your laptop and press F8 several times to display the advanced startup options. You will find the option to start the operating system in safe mode.
  If please test and let us know what happen when you try to do.

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.

• Satellite A660-158 - cannot start Windows

  Toshiba Satellite A660-158

  I bought a laptop Toshiba Satellite A660-158. It has served me less than a week. I think it's the broken hard drive.

  My problem:
  Once I start the computer, it started and has worked for a while, but suddenly, there was an error reading that I didn't have the time. Computer has been restarted. And does not load... Until the boot mode does not reach. But the initial test (with logo) succeeded. Takes a long time and finally gives an error:
  -----
  Cannot start Windows. Maybe it was because of the recent small difference is the hardware or software configuration. To fix this error:
  1. Insert your Windows installation disc, restart the computer (the complete transmission wasn't)
  2. choose the language settings, and then click Next.
  3. Select "repair your computer".
  If this disk is missing, contact your system administrator or computer manufacturer (he turned and said to wear to the DEPOT, but I do not have this feature).

  Status: 0xc000000e

  Details: Unable to start menu, since the required device is inaccessible.
  -----
  Please help me! Idon't know what make me)
  Please write to E-Mail: [email protected]

  Post edited by: HunterS7777777

  Hey,.

  And why do you think the hard drive is faulty?
  Have you ever tried the repair your computer option? Usually with this option you can restore factory in a few minutes.

  Also if you have the Toshiba recovery disc you can also restore the factory of this disc. Just boot from it and follow the instructions on the screen. You need to do a few clicks only, installation with all the drivers and tools happen automatically.

  If you have any other questions, please let us know! :)

• How to uninstall Windows 7 Home Premium to my Satellite Pro C660?

  Hello

  I recently received from Toshiba Satellite Pro C660-1 t 1 that I have Windows 7 Home Premium. Now I want to uninstall it and load windows XP on this...

  I have removed Toshiba HDD protection prgram and try to boot the XP cd... His going up to the installation of windows XP and I get a blue screen.

  Could you please help me how to uninstall this...? I'm bit desperate your help greatly appriciated

  Thanks in advance.
  Dietsch

  I assume that you are missing the driver SATA.

  Please check this forum using the advanced search option. You will find hundreds of discussions where you can read how to install Windows XP Home edition on the newer model laptop.

  BTW: create recovery DVDs before you begin to install own OS.

• Cannot get the printer driver to install the Satellite Pro C660

  tried to install epson rx560 driver printer (windows 7 64-bit) the satellite pro c660 but it fails epson told me to consult a technician because the printer driver is very good

  Any help would be welcome

  I don t think that it is a mobile phone number.
  In my opinion, you should visit and check the Epson support page:
  http://www.Epson.co.UK/printers-and-all-in-ones/inkjet/Epson-Stylus-Photo-RX560/drivers-support

• Satellite Pro C660-2DJ - Windows 10 Upgrade and lack of Chicony Driver

  Well, Toshiba said the Satellite Pro C660 2DJ is not able to upgrade Windows 10. This time I found statement opposite on other sites and installed it. I'm happy enough, because I use it. Ah there is always a but... the Chicony USB 2 Laptop camera is registered as a device, but with (!) in yellow showing no driver. I found a driver for this device, but under Windows 7 64-bit.

  It would be very risky to install an old original driver now that Windows 10 is fine? As a rider to this, I know now there are thousands of people who were sure that their machines would be upgraded to Windows 10 and they are desperate because very little work. Thoughts, anyone?

  Win8 Toshiba does not offer driver webcam more as the operating system uses standard Windows driver.
  I did not pass my S50 - B Satellite so I do not know if I have an identical problem on my machine.

  I'm really interested if another user of the forum has the solution for this.