Re: Satellite A300D - 14 p - XP stops in the middle of the installation

Similar Questions

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• Satellite A300D - 17G: some strange behaviors of the battery/adapter

  Help, please!
  My Satellite A300D - 17G stopped abruptly to recharge the battery. AC is plugged in, but it won't charge the battery and indicates "0% remaining. All contacts have been checked several times, without result. Do I have to replace the AC/DC adapter?

  Hello

  Can you turn on the laptop with AC adapter only?
  If so, then it means that your adapter is OK.
  In this case, I would try new battery.

• Satellite A300D-15B - obtaining a recovery after the removal of score media

  Hello

  I'm trying to find a way to get the recovery CD/DVD for a Satellite A300D-15B. Recently, it has contracted a number of virus and become non-functional. I did not know the recovery partition of HARD drive and stupidly deleted recovery option while re-installing windows. The new facility, however, don't show the good drivers (of course) and is even the wrong version of Windows Vista, so the product key does not (Enterprise vs Home Premium). How can I get new media of recovery? I tried the Toshiba Web site but I did have a lot of luck.

  Thanks much for any help!

  Original Toshiba recovery disc can be ordered under https://backupmedia.toshiba.eu/landing.aspx
  Check it out.

• Satellite Pro L10: CMOS clock stops when the OS is not running

  Hello

  We know a reason why the cmos clock would stop when the operating system does not (phone off), the laptop is 18 months old, I've updated the bios tries to give him a good boost, but no effect, he was also in charge for 24 hours.
  Any advice would be great.

  See you soon
  Paul

  Hello

  Usually if the BIOS date/time is wrong and always changes, the RTC battery which is mounted on the motherboard fails.
  In this case the CMOS battery needs to be changed or maybe only removed for awhile

  If your laptop is 18 months, the guarantee must be valid.
  Generally if you have registered on the page of Toshiba notebook the warranty covers all repairs for about 2 years (24 months).

  In this case, I would recommend contacting ASP in your country, because the technician must be able to solve this problem very easily.

  Good bye

• Satellite U - restarts and restarts so that the installer of Windows 7

  I just bought my new laptop Toshiba from Harvey Norman.

  When I try to put in place, it just restarts again and again and I can't do anything to stop it.

  It says installation configuration. Harvey Norman is trying to tell me that it will take hours for the Installer (at least 3).
  I want to know is this normal or is something wrong.

  Hazza 89

  It's normal. I noticed the same thing with my Satellite A500. The installation of recovery were finished in 40 minutes only, but later with all the reboots, it took more than 1.5 hours.
  It is therefore normal. Just be patient. Everything will be ok.

• Can't stop after the installation of El Capitan?

  Can't stop my Mac 2013 after the installation of El Capitan

  Hello

  Use the power button (must hold until the Mac turns off)

  Restart key CMD + ALT + P + R at the same time until you have heard of at least two start Bongs

  How to reset the NVRAM on your Mac - Apple Support

  Then, restart normally to see that stop / restart work.

  

  21:11 Wednesday. May 25, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Re: Satellite A660 - 11 M - Random freezing after the installation of recovery

  Hello

  I recently bought an A660 - 11 m, which I was happy for a few months and then it started to crash/freeze randomly in windows. I'd do something and then it just would freeze indefinitely, requiring a second 5 press the power button to turn it off manually. The fan and hard drives would continue to work if he did something, or they wouldn't be if I was not doing something at the time (this has happened four times). After that it's the only thing to do would be to reinstall the entire operating system by using the manufacturers recovery disk. The computer will then work fine for a few days or a few weeks (never more than 2 weeks) and it would be demanding full gel reinstall again. I had reinstall my programs every time but I stopped on the last 2 times and it made no difference.

  After that the computer crashed it would then refuse to boot into windows. It would be still stuck just at the moment where the sign of windows appears. I would like to know that he had crashed as the 4 colored dots appear. The computer would simply wants at this point, continually getting stuck there after the reboot of several manual. Once and only once it booted into windows on its own, but it took almost 30 minutes and the computer is very slow and unresponsive. The computer will sometimes start in safe mode, but it varies. I tried Startup Repair tool and all stages of system restore, but none of these work.

  I got to use Acronis true image10 and creating an image of the system which can then replace the whole computer in all 25mins. This saves me time, rather than wait 2 hours or whatever it is to reinstall the toshiba, but becomes quite ridiculous to have to keep re install every two weeks.

  I also tried to buy a stand-alone copy of windows 7 (while recording an image of the partition of toshiba in the case where I need) I think it might be due to all toshiba programs and other bits and pieces that are installed on the computer - it makes much faster startup, but the computer still crashes the same after awhile.

  I am sure its some ware conflicts or driver pretty hard, but I don't know what.

  Any help please!

  Rob

  Hi Rob,

  I m also do not know what exactly is the problem and I believe that no one here can say that just because it s just a user to user forum.

  Fact is that if you have already tried restore factory Toshiba recovery disc multiple times, it s not a software or driver issue because it s an image pre-tested by Toshiba.

  I guess it must be a hardware malfunction and therefore, you should contact a service provider for help. Guys can check your laptop and if it of under warranty, the repair is free.

  You can find a list of aspic here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Re: Satellite U400: operating system not found then the installation of the OS

  I have a toshiba satellite u400 with is come with VISTA.

  Because I don't like VISTA, I then installed WINDOWS XP with a multi boot.

  Everything worked well. But one day I want to resize my partitions I used Paragon partition manager.
  This product is required to operate only to resize my xp partition, so he asks me a start.

  And then nothing works.

  I try to fix my problem with a fresh install, but it seems that the boot sector was not correct.
  Then I completely format my hard disk on another computer with a USB CABLE.

  When I try to install VISTA, XP or LINUX on a CD or DVD, I ask the multiboot with F12
  I chose to boot from the CD/DVD built-in, but I get only "OPERATING SYSTEM NOT FOUND',

  It's as if the BIOS test the HARD to FIND something specific, and it does not find.
  When my PC worked correctly I could boot from the drive to dvd without problem.

  I called the SUPPORT CENTER of about 10 days, but I have no answer.

  So if someone could help me.

  Thank you.

  Hello

  OPERATING SYSTEM NOT FOUND message appears generally if the laptop has attempted to boot from the HARD drive and didn t find the operating system.

  But I put t understand why you formatted the HARD drive using the USB cable?

  Please insert HARD drive in the Bay of laptops HARD drive and check if the HARD drive is recognized in the BIOS!
  If the HARD drive has been recognised so I recommend you to take a disk Win XP Home and at the start of this disc.

  As I m not wrong not you will need to first install the SATA drivers to recognize the HARD drive.
  The fact is that the laptop supports the SATA controller and SATA drivers are needed to get the HARD drive recognized by Win XP.

  Well, after you have booted from the Win XP disc you need to format the new HDD by using the NTFS file format and should then follow with the installation of the OS.

  Check it out

• Satellite A200-1QZ: No. HARD drive during the installation of XP

  HIII,

  I have a problem!
  I have my laptop (satellite A200-1QZ) buythis for everyday, it is with Windows Vista: (((I don't like it!

  I download driver xp for any material!
  I would like to install Win XP SP2 cd boot but it's error message, when I access the installation,< harddisk="" can't="" found="">>!

  I think that the mistake is on the SATA - HARDDISK? orrrr

  Please help me: p
  and happy new year...

  You must install the Intel Matrix Storage Manager first.

  This issue has been described many times here in the forum.

  I would really recommend to use the advanced search option forum, if you need details ;)

  Best regards and happy new year friend

• Satellite 1800-814 does not start after the installation of the software

  Hello
  If I pass on my old Satellite S1800-814, it seems to start correctly: it shows the symbol of "Toshiba", then "Windows XP loading", then the screen goes completely blank, followed by a black screen showing the cursor that I am able to move. The hard drive continues to hum as usual for a few seconds, but then begins to repeat a series of clicking noises, somewhat like a disk that is stuck. The boot process is not still engaged.

  Here's the context: I installed my (old) version of Avid Xpress Pro editing software on my Satellite 1800-814. I managed to install a newer version, even if it does not function effectively, where my attempt to install an older version more closely adapted to the processing speed and the size of the RAM 1800-814. I got the usual warning at the end of the installation program of Avid saying that Windows can be affected if I let the installation ends in letting the computer on. But I pressed the option "continue anyway" (as I've done it before without negative effects). The computer off, but he came in as described above. Please tell me what I broke. Can I ever solve this?

  Thanks for your help.

  Hello

  Try to start your computer in safe MODE and try to remove preinstalled software. Please report the results.

• Working Group stopped after the installation of the new wireless router

  My working group stopped working after the installation of the new wireless router.  Router was switched were to move from DSL to fiber optic.

  I have a very simple home with two laptops working group, the two are connected with a wireless router.  A PC is running XP with the updates and service packs; the other PC is Windows 7 Home premium.  This working group was running without problems for a few years.  The Working Group has been used to share files between two laptops.  Internet access was through the DSL wireless router and print was with a wireless printer, without going through the working group.

  I had my DSL set out to free fiber optic last week, which meant that a new wireless router has been installed by my local phone company.  Internet works fine; wireless printer works.  The working group no longer works.  When I try to connect from XP to Win7 and I click on mode workgroup computers, I get this message:

  WorkGroupName is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  The network path was not found.

  I tried to create a new working group, the new name for the same workgroup on both machines, but this did not help.  Working groups are supposed to be simple; This seems to be a problem on the new router - telco tech support says that nothing is stuck on the router. I don't believe them.

  What version of XP you use (Home or Pro)?

  Can you access the Win 7 a XP computer?

  You have identical accounts, passwords on both computers?

  If all that was done was to change routers without making any changes on the computers, the most likely cause of the problem is a third party (other than Windows) firewall on at least one of the computers.  Being by default, a router automatically assigns IP addresses to computers on your local network.  Different brands of routers, but use different address ranges.  For example, Cisco/Linksys routers typically use the 192.168 form addresses. 1.1 with 192.168. 1. 254, while the D-Link routers typically use 192.168.1 to 192.168.0.0. 254.  A firewall configured to allow only the first IP range blocks communication to the scope of the latter.

  So... What is the name and version of your anti-virus program?
  What other security software is installed?

  On every laptop computer, open a command prompt window
  for XP: start > run > cmd > OK
  for Win 7: type cmd.exe in the search box and press enter
  In the black command prompt window, type the following command and press enter
  ipconfig

  Please provide the values for the following for the adapter wireless of each computer
  IP (XP)
  IPv4 address (Win 7)
  Default gateway

• CPU stops during the installation of windows xp

  Hello guys,.

  I have a problem. Recently, I tried to re install windows xp but has failed to do so because the installation process stops in midstages due to the cpu locking. But I am able to install windows 7, although anyway windows 7 I have installed is very slow. I can't understand what is happening. I tried to install windows xp over 5 - 6 times and the cpu always stops. And I love windows xp and donot want to lose. Please tell me some ideas so that I can have my xp back in order. Help, please.

  Hello

  Thanks for posting the question in the Microsoft Community. If I understand correctly, you arefacing of the questions during the installation of Windows XP. I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  He would be grateful if you answer the following questions:

  1. you are trying to do a new installation or reinstallation of Windows XP?

  2. you are trying to do an install dual boot?

  3. do you get an error message? If Yes, what is the full and exact error message?

  First of all, I would say disconnect you all external devices except the keyboard, mouse and screen and then follow these steps:

  Method 1:

  If you try to do a fresh install, I suggest you to refer to the article and check if it helps:

  How to install or upgrade to Windows XP

  If you try to do a re-install, refer to article:

  How to perform an upgrade on the spot (reinstallation) of Windows XP

  Method 2:

  I suggest you to run the Microsoft Fix it for Windows to fix performance problems of system to slow down Windows computers.

  If the problem is not resolved, please respond with more details and we will be happy to help you.

• Computer stops after the installation of security update KB2393802

  I'm 'rebuild' an old computer Gateway E-4600, to give via a local social agency.

  OS is XP Home, and the product ID of the COA is valid.

  I'm writing this, I'm in the middle of the 3rd attempt to get all of the updates to install * without * preventing the closure of the computer.  Each facility has given me minor differences in available updates, but I was not sufficiently detailed records of what was suggested to be more precise in these differences.    I'll know better here on out!   Laughing out loud

  I didn't know that a problem existed in the judgment until I was almost done with the first reconstruction, which included the installation of the software.

  During the reconstructions of the second and third, I largely used the system restore to isolate any problem and found the following:

  KB 2393802 for Windows security update prevents the computer from closing with the closure of the XP Start Menu or Task Manager.  The only way I found to stop it is to hold the power button on or unplug the computer.  I don't actually unplug the unit, but that obviously has to work!   Laughing out loud

  More interesting still, the article refers to Intel and AMD graphics cards, and this computer has a graphics card from NVIDIA GeForce2 MX/MX 400 (via Belarc Advisor).

  I'm still trying to find an answer online, but nothing so far.

  I can't give this with this problem :-(

  I would like to know the answer to one or both of the following questions:

  1. Why Windows/Microsoft Update tells me to install an update for a graphics card that is not installed in the computer?
  2. How can I prevent Windows/Microsoft Update listing and want to install the update that is as a manual or automatic installation install?

  Thoughts and suggestions?

  Yes, I'm still 'watching' this thread.

  My answer 11 - Aug 31 is still standing.

  Hi, PA Bear.

  Hallelujah, it's fixed!    : grin:

  While working with the technical support of MS, I discovered by chance that the computer turns with KB2393802 installed if the computer is disconnected from the internet.   AKA, unplug the Ethernet cable from the computer.

  Finally, I started to wonder if the question can be hardware and not software.

  So I started picking at glitter and for me, it means generally try the easiest to accomplish the solution first.   Laughing out loud

  It was a replacement of the CMOS battery, but that didn't work.  I really didn't think he would, but hey, it was the best thing to do.

  I was going to swap hard drives, with a new installation of Home or Pro, but then I realized that it was still easier to swap the Ethernet card.

  I deleted the Linksys card (the latest version of the driver is already installed) system drew the card and dug an old map SMC EZENET of the pile of junk.  (Who doesn't have a lot of junk!   LOL) went scrounging for a driver online and got that installed, then used the device to update manager the driver, and the rest is history.

  I shut down the computer at least 10 times since (I kept a detailed log and when I hit 7 successful stops I stopped making new entries) and it worked fine every time.

  This could be something to the file in memory banks trivia!    Laughing out loud

  Thanks for the help and suggestions.

• Satellite A30-203: never cooling stops when the adapter is plugged

  Hello everyone,

  I'm using satellites SA30-203. In recent days, main fan of my computer ceases when the adapter is plugged. When operating with the battery, the main fan is sometimes - normally - stop.
  I'm not working only not with software that it takes a lot of CPU. So, what could be the problem?

  Kind regards
  Tunc

  Hi Tunc

  In my opinion the activity of the CPU is not affected only by the software you use, but all activities. Many of these activities work constantly in the background and the works of CPU. Please don t forget that the processor is not the only source that produces a lot of heat. The graphics card is also responsible for the heat.

  As you know all the hardware components are placed side by side and it needs to be cooled correctly. On my Qosmio F20 cooling fan starts to run even if the download of some files is active.

  Believe me that there is no problem. You have a device of high technology with the latest hardware components and the unit must be cooled properly. I can recommend you to change method of cooling in electricity from the night before and put it in silent mode.

  Good luck!