Re: Satellite C660 - speed regulator did not work properly.

Similar Questions

• Satellite L500D - integrated webcam does not work properly

  Hello world

  I have a L500D (I got it for about 2 months now) and yesterday I realized that my webcam did not work properly even if it worked just fine a couple of days.

  Here's the problem: when I turn it on (via Skype or through application of camera web toshiba), the colors are reversed: it's exactly like I had added an effect on the image as 'Posterize' or 'threshold '. Everything is bright, grainy, saturated...

  I tried in low light and high, and the night mode is not on.
  I couldn't solve the problem with the webcam settings, but regardless, I, can not do anywhere near a normal image.

  I spent a lot of time surfing the web but couldn't find a solution (or someone with a similar problem, in fact). I have windows 7 64 bit.

  Any help would be greatly appreciated. I run my laptop with a lot of care, which makes even more beat when something goes wrong... Thanks in advance!

  Jminiz

  Hi mate

  Didn t find such a problem described discussions, it seems that you are the first person who has reported this

  Have you tried to reinstall the webcam software?
  Try this.
  First remove the software of webcam and then after new reboot, install the new downloaded webcam software.

  PS; have you removed the thin sheet secure the lens of the webcam?
  Check it!

• Blocks - Spooler subsystem or the display driver did not work properly

  I have a Vista Home Premium OS. He crashes at least once a day and the State of boxes (approximately equal amounts) dialogue that the Spooler subsystem or the display driver did not work properly and that have been closed by the enforcement data system. Can you give me advice on how to fix these problems?

  Hello

  1 when was the last time, he did not work properly?

  2. the accident happens at random or when executing a particular task?

  3 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman. Run the automated FIXIT and check. You can also follow the other steps listed in the article.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Check if the problem persists, if she does not follow the steps in method 2:

  Method 2:

  This problem may occur if a third-party printer driver or service affects the functionality of a newly installed printer.

  I also suggest you to follow the steps mentioned in the link and check.

  Do not operate the automated FIXIT. Follow the manual steps and check.

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

  http://support.Microsoft.com/kb/810894/en-us

  (Also applies to Windows Vista)

  Method 3:

  You can also update the display drivers on the manufacturer's Web site or use the link below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Pick up the pieces after a computer crash

  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Hope this helps and keep us informed if you need help.

• I bought a new computer and also Adobe acrobat Pro XI.  It did not work properly.  I uninstalled and tried to reinstall it, but the computer will not accept the serial number.  What can I do?

  I bought a new computer and also Adobe acrobat Pro XI.  It did not work properly.  I uninstalled and tried to reinstall it, but the computer will not accept the serial number.  What can I do?

  You accidentally type in a redemption code when he says he only wants a serial number?

• Satellite Pro M10 - infrared does not work properly

  Hello

  I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click Troubleshoot to start the troubleshooter for this device.

  However, under Driver Details is said:
  C:\windows\system32\DRIVERS\smcirda.sys

  I extracted the zip file in my home directory of c:\downloads\infrared.
  whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

  Thanks in advance for any help.
  Chris

  Hello

  If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.

• Satellite Pro L300 - sound is not working properly

  Hi all!

  Last week, I bought my Toshiba Satellite Pro L300.
  I have had no operating system with the laptop, but I had my own XP, so I changed the SATA drives in compatibility mode and installed windows XP Pro.
  (By the way this is a Vista laptop officially)
  I installed all the drivers, but I have a problem with the sound. It has a bad quality, but this isn't the biggest problem.
  If I start listening to music, the sound stops every 3-4 seconds for a fraction of a second. It's as if the processor worked (like the computer was loading, and the processor is a bit overloaded) I usually have this experience if I run many programs simultaneously on my old computer, it slows down and the music stops for a second. But on the new laptop, I run winamp, I have dp nothing but listen to the music, and I get this problem.

  Can anyone help? Is it because of XP? Or the driver does not work properly? Or I have a big problem and should go back to the store?
  Please write!

  Hello

  Did you notice HARD drive activity when this happens?
  Maybe some anti-virus works in the background.

  Maybe you can order original Toshiba recovery DVD for your laptop model. Check it out under the https://backupmedia.toshiba.eu/landing.aspx

  Using WXP only? I ask this question because I believe that you can only get to this Vista laptop.

• Satellite L775 - mouse pad does not work properly

  I have a laptop Toshiba Satellite L775. I run Win 7 Home Premium. My mouse pad does not work properly. I also have a Logitech Anywhere MX wireless mouse. I tried the mouse pad to work properly with the key FN and F9, but it does not work. And you really have no idea if that turns or out of the mousepad anyway, subj for another time I guess.

  What does not work, but I have to do is to go to Control Panel then mouse option load that and just scroll the tabs without changing what each time and then close and the touch pad works. But only for this session. If I have my laptop nearby, or turn it off, I have to start throughout the whole process.

  What's past and how to fix this?

  Thank you very much.

  > What's past and how to fix this?
  After reading your ad, I still don t know what is your problem.
  > My mouse pad is not working properly
  How to understand this? What does not work properly? What happen exactly when you start your laptop?

• Satellite C850 - internal MIC does not work properly

  my knees thoshiba (C850 - B237) internal microphone does not work properly. I checked my record with webcam... but can hear the noise only... in the settings of the sound card, everything is ok... I also did the uninstall device driver and restarted... But the problem is still... Help, please

  You must mark the internal mic as the default device.
  This can be done in its tab → click right on internal mic to record and choose the default device

• Steam did not work properly,

  Original title: Chkdsk issue

  Hello, I ran a chkdsk on my PC that Steam was not working properly, this seems to solve the problem until I restarted my PC, then steam would not work.

  is there everything what I should add to my chkdsk command, I am currently using chkdsk C:/r

  Maybe you can tell us what "Steam not working properly" and "then Steam would not work" means exactly.

  If you were / are getting some screenshots of the error messages, exactly what they say (not paraphrase please) or post.

  There is nothing wrong with running chkdsk with error correction (except it may take some time), but what compelled you think that would solve your problem not specified steam - was - that something you read somewhere as a possible solution to your problem not specified or have you just felt like a good thing to do in time?

  Why do you think the problem is with Windows and not with steam?

  If the steam was the problem what did you find when you have asked about it in the Steam support community?

  http://steamcommunity.com/discussions/

• Satellite M40-110: WLan is not working properly after sleep mode

  Hello, I have a M40-110. I have some problems with my wireless adapter. After I closed the screen (bed) and the computer goes into sleep mode, I open the computer screen becomes active, but this time the wireless adapter is not working properly and I can't connect to Internet with my wireless adapter. Sometimes, it seems that the wireless adapter has established a connection, but I can't send and receive data from the Internet. Sometimes after this case, the wireless adapter becomes invalid.

  My Service offered to enable the bios wake-up-on-lan option. After doing this, the Internet worked properly.
  But I am wary about this option:

  (1) not allowing this option cause draining my battery quickly?
  (2) this option doesn't make that hides my hardware failure (wireless card) and it is really necessary to solve this problem?

  Thank you
  Sinan.

  Cool, thanks for the info

• Satellite C650D - Fn buttons do not work properly

  Hello

  I'm a new Member here and maybe it was submitted like that, maybe that I forgot.

  For two weeks, I have trouble with the FN KEY.
  It does not work properly. I can't go up and turn down the volume, etc.
  I have reinstalled many riders as hothey utility. It is inconvenient and it makes me angry...

  HELP PLEASE.

  You have any ideas how I can fight with this problem?

  Hello

  The FN keys are controlled by the Support of Flash memory card utility.
  Try restarting the software. You can find it in all programs-> Toshiba-> Flash Cards.

  If that doesn't work, try reinstalling this application.
  You can download the page of the European driver Toshiba Flash cards
  http://EU.computers.Toshiba-Europe.com

  Welcome & good luck

• Satellite L50D-B - TouchPad does not work properly

  My TouchPad is not working properly, it stops working after a few seconds after the start. Can someone help me?

  To be honest, it is not easy help these problems.
  What exactly happens? Touchpad is completely off? I want to say is there any kind of reaction?

  Have you tried to turn again using the F5 button?

• Sony Cybershot DSC-W710 did not work properly

  Hello team Sony,

  My Cyber Shot is not working properly. The battery is fully charged, but show of camera Battery.That of low use of the battery in another GM so battery working properely and also, picuter qulitiy is not good until 3 Months.I have downloaded the software.

  Please suggest me how to install the software.

  Best Regads,

  Abhishek

  Try a hard reset (remove the battery and turn on the camera for a minute (or hold down the power button for a minute))

  If it does not it, it could be that the battery is dead.

  Although it loads and it's full, it probably does not load properly, so when you put it in your device, it will eventually give you the low battery warning.

• Satellite C660 keyboard and mouse not working not

  I have a Satellite C660 who is about to leave the window.

  The list of problems are the following:

  Keyboard does not work
  Mouse pads and button do not work
  USB mouse and keyboard do not work (but light up with power)
  He likes also turn off randomly when the battery in but it's the least problems.

  any ideas as to why he did this and what can we do about it will be highly appreciated.

  Thank you.

  Hello

  I m wondering about your statement about external USB mouse and keyboard.
  I thought that your problem has been linked to the defective module internal keyboard and touchpad, but now I m thinking that this may not be the case since the external USB keyboard does not work as well as the external USB mouse.

  Probably his most serious hardware malfunction: maybe something related to the motherboard? Who knows a hardware diagnostic test must be done to confirm this

  Just a question: are you able to access the BIOS? I mean the key F2 keyboard works in order to access the BIOS?

• Satellite C660-108 - Wireless does not work

  Hey everybody,

  New to the forum, I had to sign up because of a problem with shame. I would like to apologize in advance because I know nothing about how computers work.

  I have a toshiba satellite c660-108, windows 7 OS. Yesterday I was updating it and I used it very well after that I restarted. He stops and went to bed. Today, I turned on and he did a system restore, don't know why. So all went through and then it wouldn't connect to the internet wireless, only ethernet cable (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=69127&tstart=0 - same problem as far as I can tell).

  I'm in the middle of my diploma thesis and word does not work now, so I did a full factory restore hoping everything would be ok. This isn't.

  Ive tried to download the driver toshiba wireless, just didn't work. It currently downloads Realtek but I'm sure it won't work either.

  How to get another wireless network card?

  Any help would be appreciated.

  Thank you

  James

  The essential is that you it works again.
  So congratulations. :)