Second Signal SIM issues

Similar Questions

• India - problems of signal/SIM?

  If you use a G motorcycle in India and have signal or SIM problems when 4.4.2 thanks for posting here. That's what we want to know.

  • What happens exactly? (Please describe only, do not assume)
  • How many times it happens?
  • What version number and compilation of the system do you have?
  • If you are in 4.3, 4.4 and 4.4.2?
  • The factory reset you the phone?
  
  

• 'Insert SIM card' blackBerry smartphones and SOS signal - sim and signal error

  Hi, this is my first post so bare with me

  My 9000 "BOLD", which ive had for a lil and now has decided to not give a signal more or even accept my sim card.

  Ive tried a complete cleaning of the handset (and I backed everything up), remove and reinsert the sim card and the good old battery pull but nothing works and the problem is still there.

  my phone is locked to t-mobile and I contacted them to help my problem, but they were dog-disorder absolute!

  What do you think I should do here?

  Thanks in advance

  If your phone don't like your SIM card and won't give you a signal, you should look into getting a phone that makes.

  If you are still in your warranty period, you should walk to your carrier for a replacement.  However, before doing so be sure to do a backup via Desktop Manager.

• * Second computer connection issues. Limited connectivity when it is off, then on again. Help please! *

  I have a cisco linksys e3000 router. I did have problems before until I tried to add a new computer via an ethernet cat5e cable. The first always computer very well if I unplug the router or modem in any order and reconnect. I don't know how to solve this problem. Ive tried a method due to unplug once, but it worked until I turned off the computer and turn it on again later. I am also under 2 xboxs without any problem. I used cisco connect to diagnose the problem, but he just told me to power and the modem unpulg television cable and I did it with no luck. Please help me with this...

  2 xboxs

  2 computers (wired)

  1 ipod wifi

  linksys E3000 router

  ARRIS modem model #: TM602G P / N #: TM02AH1G6

  question aside. second priority.

  Although I have good equipment, the internet is quite slow.

  I have the best service from my supplier that indicates it has up to 50 Mbit/s download speed.

  I ran the speed test internet cisco and only got a maximum of 20 download and upload 5.

  How can I speed this up?

  I really appreciated all help I wouldn't have had to pay $ 30 for a a time phone supports no call for a service that is not of the same cisco.

  First PC is fine, 2 XBOX connect correctly. There could be some settings of the computer that you are trying to connected to the router which prevents from connecting to the internet.

  Open your DOS command line and type ipconfig/all on the blinking cursor and post the result here.

• Signal - Slot issue

  I have a VirtualKeyboardService that is configured in this way:

  constchar *uri = "bb.cascades.bps";
  qmlRegisterType(uri, 1, 0, "BPSMonitor");
  qmlRegisterType(uri, 1, 0, "VirtualKeyboardService");
  
  QML :
   attachedObjects: [
              BPSMonitor {
                  id: bpsMonitor
  
                  //Receive events when the keyboard becomes visible or hides
                  virtualKeyboardService: VirtualKeyboardService {
                      id: virtualKeyboardService
                      // Swipe from the bottom-left bezel towards the center of the
                      // screen to force the keyboard to be visible
                  }
              }
  ]
  

  I don't know how to put in place in order to provide this service to the main application class.   I think I need a signal / slot, but don't understand how to set up.   You will need to send a REAL simple when a certain touch.

  VirtualKeyboardService has these signals:

• 1720 second Hard Drive issues (recovered)

  Just got my 1720 a couple of days... love up to the exception of surveillance do not include mounting for a second disk drive.  Bad bad bad decision.

  In any case, after arguing with technical support and get anywhere, I need to know what the official are much #s to order everything I need to mount a second drive.  The tech support person gave me two reference numbers, but they appeared identical in description and he did not indicate whether they understood the necessary screws, etc.  So, any help would be appreciated here.

  Also, what type of SATA drive should get.  I see people saying you can get up to a 320, but I can't have a good deal on a SATA 500 GB that I would use.  But this is not feasible?  Should what features I look for when you select a drive?

  TIA
  Kevin

  
  

• Synchronization of the signal with PCI-6602

  Hello

  I need to generate three signals that must be synchronized.

  To do this, I use a PCI-6602.

  The first signal is used to trigger a device, the second signal is used to simulate the noise.

  The third signal should wear the noise so that it starts before the trigger signal and stops shortly after the trigger signal.

  The signals are then combined with an external logic circuit.

  (To see what I mean, see the first PDF).

  I use a fourth timer to synchronize all other clocks, but the three signals are beginning to run before starting the timer task. I have this evaluated using not to no and a oscilloscope.

  The trigger and gate (first and last signal) are below 100 Hz, the noise signal is about 200 kHz.

  At least the trigger and the door must be started synchronously, otherwise the waveform is not what we want. The noise signal didn't need to be synchronized.

  I am sure I am missing just a little detail here, maybe you can show me what I missed.

  Please check my screenshot of LabView to see what I've done here.

  If you want more information about the VI, I can take apart a little and send it, too.

  Try using start to the outputs of the 3 meter (see attached VI)

• Generating the signal as shown in the picture in labview

  Hello

  I'm using labview in 2011 and want to generate the second signal as shown in the picture attached in labview as I want to use it as input to implement adaptive filtering, if the first signal in the image represents the output of the adaptive filtering area.

  May I know how to generate a second signal.

  Thank you.

  
  

• Table of waveform and digital signal 2

  Hello

  I need to see 2 or more digital graphic USB6008 of waveform input signal, but each signal must be different offset, it is possible?

  Just add a constant offset to the second signal between the Boolean value to (0,1) and the fiber node.

  Lynn

• : The TWO SIGNALS DRAWING: need converter

  Hello

  I just need to shoot 2 signals at the same time with index range x [-1.. 1] by 0.1

  the first signal is tan (x) hyperbolic function and the second signal is my Function

  I think I need a converter!

  concerning

  m, s

  mangood wrote:

  I want to draw the ideal tanh with my function at the same time to see the error as below with x

  Something like that?  I simply called the VI facilitated in a loop FOR, autoindexed the outputs and created the graph plots.

  

• How can I synchronize two signals in Labview?

  The first signal is a pulse index which gives the position of a reference point of the wheel (= 1 for 0 ° and signal = 0 for 1-360 °), and the second signal gives the total force meeting the wheel. The two signals have different sampling rates high. The first signal is always 360/rotation, but the second signal varies from cycle to cycle based on how fast the force is changing. The signals are in the form of two columns of numbers in an excel spreadsheet.

  I would like to do such as Labview at the exit of the angular position of the reference at the time of the cycle where the wheel knows the maximum strength in degrees. Can anyone suggest a vi or a method that I might be able to use for this task? I am new to Labview, so any help is appreciated.

  Hi Westerman,

  I have a little trouble to understand the basics of what you're trying to do. A little more details would be very helpful pointing you in the right direction. If you want to align the timestamps/reference of the two signals time?

  I've included a link to a document that describes generally how encoders (I guess that your pulse index indicates that you are using an incremental encoder) can be used in LabVIEW.

  http://www.NI.com/white-paper/7109/en

  You should also try the search the forums for questions relating to the use of a rotary encoder in LabVIEW. I was able to find several with the included code example.

  Feel free to provide us with a few details and we'll help guide you.

  Andy C.

  Technical sales engineer

  National Instruments

• Analog output OR-6211 - tip of low voltage at the beginning/end of periodic signals

  Hello

  I use a data acquisition multifunction NOR-6211 at the exit of two analog voltage signals that are periodic. I read the values for the latter to a .txt file that is generated in Matlab. The two voltage signals are the same, however, one of them is 1/2 period out of phase from each other.

  Here's my output information:

  Frequency 100 Hz signal

  Sampling rate of 200 k

  Number of samples 2 k

  Text files have 2000 samples in them.

  When I look at the output on the oscilloscope, the first signal looks great, but the second signal is a voltage surge at the beginning/end of the period. I checked the .txt files and the first starts at 0 and ends at just above zero. The second starts at approximately 288 mv and ends at just below 288 mv.

  I have attached my .vi and a .jpg file showing the Spike.  It stings to zero so I think it is a kind of buffer reset or something, but I can't understand this one... Any help would be much appreciated.

  Thank you

  Why are you converting complicated to and from DDT to get a picture of wave forms when you don't provide timetable information? Use Waveform build and build table as shown or just use the DAQmx Write DBL 2D value.

  As Henrik, I fear that your data are not what you expect it to be. Put a graphical indicator or a table on the wires going to DAQmx writing to see what you have.

  Lynn

  

• HP Laserjet M201DW: Can not completely Turn off HP Laserjet M201DW signal wireless

  I have two questions:

  1. more printer is interfering with my keyboard and wireless mouse

  2. the printer appears on my streaming (SSID) devices

  I turned off the wireless keyboard of the menu signal, but as I understand it, there could be a second signal or something.

  How do I completely stop the wireless signal?

  From the front panel.

• Problem, the signals and Slots

  Hi, as I posted in one of my other posts I have following problem with signals and messages and would be nice if someone could clarify anything that I don't seem to be able to find what the problem of the outputs.

  I have the code:

  void MYNetworkClass::requestFinished(QNetworkReply* reply)
  {
  
        // Check the network reply for errors
        if (reply->error() == QNetworkReply::NoError)
        {
           // read response
           const QByteArray response(reply->readAll());
           qDebug() <<"Response: "<< response;
  
           JsonDataAccess jda;
           QVariantMap results = jda.loadFromBuffer(response).toMap();
  
           QVariantMap data = results.value("SomeData").toMap();
  
           emit signalSuccess(data); // I reach here .... 
  
  // however actually when I click "Step Over" in debug mode, and try to exit the function// afterwards I get such "error" saying: No source available for "QMetaObject::activate() at  0xb9668da7" - highlighted in red.
  
       }
       else
       {
           qDebug() << "\n Problem with the network";
           qDebug() << "\n" << reply->errorString();
       }
  

  In MyNetwork class I also added the definition of signal in the header file:

  signals:
  
      void signalSuccess(QVariantMap result);
  

  Now also when someone calls an object MyNetworkClass method which calls requestFinished,.

  I want to catch the signal which is emitted by the requestFinished - as shown above.

       MyNetworkClass *network = new MyNetworkClass();
  
      QMap params;
      params.insert("username", userEmail);
  
      bool res = QObject::connect(network, SIGNAL(signalSuccess(QVariantMap)), this, SLOT(SomeSlotForSignal(QVariantMap)));
  
          Q_ASSERT(res);
      Q_UNUSED(res);
          network->makePostRequest("Login");
  

  My problem is that the SomeSlotForSignal slot never is called... (even if the signal is issued constitute requestFinished method and as I stated SomeSlotForSignal as a crack in the header file...) What can be problem? Any help? Thank you.

  I guess I solved the problem.

  The code I presented previously registered function

  F of a class B:

   void B::f()
  {
  MyNetworkClass *network = new MyNetworkClass();
  
      QMap params;
      params.insert("username", userEmail);
  
      bool res = QObject::connect(network, SIGNAL(signalSuccess(QVariantMap)), this, SLOT(SomeSlotForSignal(QVariantMap)));
  
          Q_ASSERT(res);
      Q_UNUSED(res);
  
  network->makePostRequest("Login");
  }
  

  Then the function f is called to:

      B object;
      object.f();
  
  The problem was I think that when the server responded "object" was destroyed from the stack. When I replaced the above code, with 
  
       B* object = new B();
      object->f();
  
  I think it works now......
  

• There is no such thing as PushService createChannelCompleted signal

  Dear BlackBerry developers

  I am building an active push application. So I started with the PushService class to create a session and a channel and other things. Because I need the token server gives to my application, I need to connect with the createChannelCompleted (const bb::network:ushStatus status, const QString & token) signal. This signal is copy pasted from the documentation on here http://developer.blackberry.com/cascades/reference/bb__network__pushservice.html.

  But I always get the following error message

  Object::connect: No such signal PushManager::createChannelCompleted

  I tried all the ways to connect with the signal

  connect(pushService, SIGNAL(createChannelCompleted(const bb::network::PushStatus&, const QString&)), this, SIGNAL(createChannelCompleted(const PushStatus&, const QString&)));
  

  But I can't get it right, apparently.

  Thanks in advance!

  Hello

  This should work:

  QObject::connect(service, SIGNAL(createChannelCompleted(bb::network::PushStatus,QString)),
                       this, SLOT(onCreateChannelCompleted(bb::network::PushStatus,QString)));
  

  Statement of slot: / / upd: fixed a statement of slot

  void onCreateChannelCompleted(const bb::network::PushStatus &status, const QString &token);
  

  Your statement should probably also work if you replace second SIGNAL() SLOT() and use a full PushStatus in the slot. But for const const reference and & can be left inside the SIGNAL() and SLOT() statements. MOC will remove them automatically anyway.