Re: Satellite L300 series - Touchpad stops working

Similar Questions

• Because I installed a Satellite L300 printing software stopped working

  Hello!

  I'm new here so not sure if I'm posting in the right place. Mods, please do not hesitate to go to the relevant section, thank you.

  OK, I have a Toshiba Satellite L300 laptop and since I installed a printing software Wednesday evening, my laptop suddenly stopped working!

  Since Thursday night, I tried to make it work, but I am faced with this message:

  When I load up, it goes to Windows error recovery:

  "windows does not start.a recent hardware or software change might be the cause.

  If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.if power was interrupted during startup, choose start windows normally"

  then it gives two options: Launch Startup Repair (recommended)
  Start windows normally
  ==========
  -then I click on (recommended) launch Startup Repair
  -then a scren called load' system recovery options «...» It is said: select an operating system to repair, click next.only windows vista listed operating systems and can be repaired

  If you do not see your operating system listed, click load drivers to load the drivers for your hard disks...

  but nothing comes up so I click load drivers and it gives me just loads of records at random... and I don't have any idea those to load
  ========
  5 years report an abuse
  Additional details
  so I click "next".
  ========
  Then, I have 5 options:
  -Startup Repair
  -system restore
  -windows complete pc restore
  -windows memory diagnostic tool
  -command prompt
  ==========
  Startup Repair says that manually, it can't solve any problems

  -simply said system restore your computer is located in a limited State, and this action can not be changed... but there is no option to do so

  -restoration of windows complete pc says I need to insert a backup disk which I do not have

  diagnostic tool memory Windows says that windows blocks it
  ============
  but on restoring system it tells me to type something like: rstrui.exe /OFFLINE:C:\Windows
  but I don't no where... I typed in the command prompt, but don't understand how to use it
  =========
  I also tried to click Start windows normally, but it won't work

  If the problem is the software installed, start Notepad in safe mode and try to start restoring the system from there.
  Please let me know what options are available. Can roll you back OS a few days back?
  Are some that are listed restore points?

• Satellite M50A - ELAN touchpad stopped working - again!

  Do not forget this recent thread?

  https://Forum.Toshiba.EU/showthread...topped-working

  Well guess what that my mouse and touch pad stopped working again today, this time during a Windows Update (and not after) - and guess what... the 'momentum - other hardware - MOMENTUM Input Device"was one of the updates, as well as the last time.

  The good news, for me, anyway, is that this time the problem was temporary. After forcing a restart by a long press on the power button, mouse and touchpad has been restored after finishing installing updates.

  EDIT - just to say that my touchpad customizations for example reverse scroll direction, 3 finger tap to start the browser etc were all lost. Not much, just a nuisance

  And as a follow-up, after you change the registry to restore the functionality to launch my favorite browser with a finger 3 press on (see another thread for reason of why I had to use regedit) I've had intermittent results.

  Now, I realized that the 3 finger 'press' feature seems to have disappeared to be replaced by a '3 fingers' touch. It is not documented that I can see, the registry key names remained the same, but pressing done nothing at all works a 3 persistent finger touch.

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• Satellite L500D PSLT6A - FN keys and touchpad stopped working

  I have a Satellite L500D, model PSLT6A-015003, windows 7 (32 bit) notebook and the keys FN and the touchpad stopped working.

  I downloaded from download of Toshiba, the touch pad and the FN key downloads page, but nothing works.

  Can someone tell me please how to get this working again, even if it's only the touchpad.

  Flash cards are controlled by the utility of Flash cards and this utility is part of the Toshiba value added package. If this package is installed on your machine it remove the system, restart your computer and install the latest version of the Toshiba download page.

  Please also follow option:
  Open the settings of flash cards and set the option to allow the mouse to make the maps and test if it works.

  Please check the touch pad properties. Check if the touchpad is properly listed and enabled in the device (mouse and other pointing devices) Manager.

  Second thing you must check is the control panel > mouse > device (last tab) settings. Make sure that the Synaptics touchpad is listed here and it is not disabled.
  As last step make sure touchpad is not disabled with the combination of FN keys (if possible).

• Re: Touchpad stopped working on my Satellite L350-171

  Are my touchpad stopped working and the 2 buttons below. I have been using only a usb mouse, but I want to free up space, are there solutions please.

  Please check first if the touchpad is enabled or disabled.
  Use the FN + F9 key combination and don't forget the touchpad is enabled.

  Also check the Device Manager and the entry for the mouse and other pointing devices. Touchpad is listed here?

• My cursor Touchpad stop working.

  I have Toshiba laptop, Satellite C-650-01W.  Cursor Touchpad stop working. How to get back to work?

  Hello

  Thanks for the reply.

  Glad to know that the problem has been resolved. If you have additional questions about Windows, please post your questions in this forum.

• Satellite L300-215 - Webcam not working not

  The webcam on my Satellite L300-215 did not work because I downloaded the new software of Toshiba months ago.
  The Chicony webcam is not yet recognized, and it will not install the Toshiba software.

  Two hours with Toshiba technical staff, including their having access remote to my computer, does not solve the problem.
  It seems that this is a very common problem and I tried some of the suggestions on the assignments, but without result.

  Anyone out there have the answer?

  I have two laptops Toshiba, Satellite P200D and Satellite A300, both with webcam and everything works fine. I agree therefore with statement on the very common problem.
  Webcam works well if your laptop is preinstalled with recovery image Toshiba (factory settings)?

  > I tried some of the suggestions on the assignments, but without result.
  What you have tried to solve this problem?

• Satellite L850 - webcam suddenly stopped working

  The web cam on my Satellite L850 has suddenly stopped working.

  It does not appear in Device Manager;
  I downloaded the latest driver on the Toshiba site;
  I checked the BIOS and the web cam is turned on;
  Always when I open the web cam application I get the following message:

  "webcam initialization failed Please restart request and camera control.

  I scoured the advice forum and short of a return to the top and reboot disk HARD, I find no reasonable answer. I can't back up as I am away from home is out of the question. I need web conference call cam / call my family to the United Kingdom back.

  Tired of going round in circles and getting nowhere.

  Any suggestions?

  Post edited by: mrclean

  Even if you have not changed the settings in the BIOS, you must Access the BIOS to make sure that the webcam is turned on it!

  I also recommend the suite of this workaround:
  Uninstall the webcam software
  Uninstall the VAP
  Uninstall all software needed the webcam (Skype, etc...)
  Now, restart and install CCLeaner (cleaning of freeware software)
  Reboot once more.
  Run CCleaner and clean the system and the registry.
  Reset
  Now follow with installation of VAP
  Reset
  Install the webcam software
  Reset
  Test webcam.

  Good luck

• CD/DVD-Rom on a Satellite 1110 laptop has stopped working

  Hello

  The CD/DVD-Rom on my satellite 1110 has suddenly stopped working. When I insert a cd or a dvd there is no activity in the drive and when I look in my computer there is no recognized files.

  I used the Device Manager and it says that the device is working normally. It's like the PC just can't 'see' the camera more.

  I used the program of troubleshooting without success and I was wondering if someone technically a little more spirit that had me ideas

  See you soon

  Rob

  Hey, sorry cannot be of any help to you, but I'm having exactly the same problem. I can't find a place to download the new drivers.

  did you progress?

• Compatible Snaptics Ps/2 Port touchpad stop working, gives error Code 24

  Last Thursday my Snaptics Ps/2 Port Compatible TouchPad stop working. Code 24 arrives. What is the 24 code and how can I solve this problem?

  Hi linda3398,

  Please see the following about the Code 24:

  Code 24

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  Cause

  The unit is installed incorrectly. The problem may be a hardware failure or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  You may need to update your drivers for the touchpad.

  I hope this helps!

• My touchpad stop working, how re - activate it?

  I had it hooked up to a TV to live stream on the TV screen, in the process of my touchpad stop working and I had to use the mouse to another system.

  Hi Jvergith,
   
  1. have you tried to update your touchpad drivers to see if that fixes the problem?
  2. What is the brand and model of your laptop?

  Remove the touchpad drivers in Device Manager and reinstall.

  To reinstall the drivers for the touchpad by uninstalling current drivers
   
  Sometimes, there may be driver errors that prevent the touchpad from working.
   
  a. Click Start; on the start menu, search type devmgmt.msc and press ENTER.
  b. If you receive a quick click, consent to continue.
  c. expand mice and other pointing devices.
  d. right-click on the component of touchpad and click on uninstall.
  e. once the uninstall is complete, restart the computer.
  f. download the latest drivers for the touchpad of your computer manufacturer website and install it.
   
  Try to follow the link provided to update a hardware driver that is not working properly and check the question below.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• My touchpad stop working suddenly... .Please help me

  I have laptop HP 530. All of a sudden my touchpad stop working when I press on double-click.

  but I'm stil can move the pointer of the mouse over it.

  I don't really know what is the cause of this problem, I need someone to help me please.

  Osama.

  My touchpad back to life finally , I am so happy happy

  After 8 months suddenly and luckily it worked again

  It's a problem with the hardware, by chance, I pressed the left button of the penalty and I have the answer to the pressure

  Thanks to God,

  Thank you anyone help me

  

• Satellite C series - Touchpad has stopped working Windows 8 running

  Hello

  I put t know if anyone can help.

  My touchpad has stopped working.
  At first, it only works on the login page. Now it s not there at all.

  I've only had my Toshiba C for a few days and it s the first time I used Windows 8.
  I tried F5, and I tried to go on the BIOS with F2 when booting, but used to come.

  Help please

  Hello

  Please check this Toshiba document:

  + How to change the settings of the Synaptics touchpad in Windows 8? +
  http://APS2.toshiba-tro.de/KB0/HTD3101Z30000R01.htm

  Don't forget that the necessary parameters of the touchpad are enabled!

• Satellite L300 - 1 8 - Microsoft Works Suite has stopped working

  Hiya,

  first I will say that I am only on my 2nd computer so im not exactly a brainbox on them.
  I have a Satellite L300 - 1 8 with microsoft vista home premium 32 bit.

  I only had this laptop for less than 2 months today, when I was with microsoft works suite, word processor he suddenly stopped, I rebooted a document she had auto saved and then closed.
  When I tried to open another document empty it let me, but he wouldn't let me stick to what I needed.
  Now, I can't open anything in microsoft works and if I try I get the message:
  + ' A PROBLEM CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. " WINDOWS WILL CLOSE THE PROGRAM AND NOTIFY YOU IF A SOLUTION IS AVAILABLE. +

  What is - this and why the habit he work?
  I him have not used much in fact I think it's maybe the first time. I was on the site of microsoft and its Greek to me, in any case the bit I understand he said "If your windows is preinstalled go to Toshiba" or words to that effect.

  I've been on the Toshiba site and it's all Greeks too. I don't understand all this and I can't seem to find any assistance on their part, the only help I can find is this site with everything what you smart people on the resolution of our problems to us.
  Then I can help you, in simple language please.

  Thank you. Julia :D

  Hello

  It is a simple generic error message that you will always see when the programs or applications crash.

  Something was wrong, but I can't tell what's wrong with your MS works.
  If you want the event viewer for errors, but to be honest, you can check this will not help you much if you're not computer.

  I gogoled a little and some people brought on the same error in MS Word, but like I said above; This is a generic error message.

  However, the people have this problem than by the new installation of MS Works.
  I don't know if you received a MS Works Mr. disc if so, remove/uninstall the MS Works the system first, reboot the laptop and use the MS Works drive for new installation.