Re: Satellite L30D - low screen after installing Windows 7 resolution

Similar Questions

• Satellite Z930 - Low Memory After installing Windows 10

  Hello

  I have a Satellite Z930, which works perfectly for years. I recently downloaded and installed Windows 10 and as soon as I did, I get low-memory computer warnings, the laptop works slowly and I need to stop it and restart it. I installed all the updates and I still have windows mail and web browser (a) open, but the problem persists. I used 75 103 GB of storage, not of course the relevance that is.

  Any help would be appreciated, I'm tired.

  Chris

  Dear Chris,
  I bet that for Toshiba support being able to help you, it would be necessary to know the exact version of the Z930 (e.g. Z930 - 16K) you have, including how (live RAM) is currently installed.

  Concerning
  Flow

• Computer crash - blue screen after installing windows updates

  After you have installed Windows updates waiting on the computer earlier this week, we were not able to get the computer working again.  We were asked to back up and restore the factory settings, which we did.  It instructions update you Windows. When we download the updates it crashes again.  Does anyone know if there is a problem with one of the recent updates that we should avoid so that we our computer working again?

  Hello

  Since you are quite sure this is an update to the source of the problem I want to troubleshoot using this method.

  Control Panel - Windows Updates - upper left settings - set to download but allow you to install them.
  To operate the system and see if there are problems.

  If no problem try to apply updates in small groups or even one at a time, depending on how
  There are many. Beware especially of driver updates that may be older that you have or
  those even incorrect.

  ---------------------------------------------------------------------------------------------------------------

  These can help to solve the problems of update.

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  Or

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  ============================

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Why not full screen after installing windows 8 (on windows 7) is there a solution?

  I used Windows 7 with VMware Fusion and had no problem with the screen, when I decide to choose for full screen, I got a full screen.

  After you have installed windows 8.1 on windows 7 I have a problem with the mode full-screen, of course, I can choose full screen, but then I don't get the max screen. The view of windows 8 is only 33% of the screen I think or maybe 50, but this isn't what I want. How is it possible to change this, or is it not possible? When I choose full screen of course I want to see windows 8 on the full screen, not for part

  Hello trebor66,

  Welcome to the VMware communities forum.

  First thing to try is to completely uninstall VMware Tools (if installed), reboot, then install VMware Tools (and reboot again).

  Who help me?

  --

  Wil

• Satellite U300 - no sound after installing Windows XP Home edition

  First of all sorry for my bad English; P
  I installed Windows XP Pro on my computer and all the drivers with installation instructions, but I have no sound, there is no audio device. I downloaded the drivers from the Toshiba site and the Realtek site. Both do not work.

  Thank you.

  Hello

  Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99567 please

  There is some discussion on the similar problem. Maybe it will help you with your Satellite U300.

  Bye and good luck!

• Satellite A100-495 - black screen after installing Windows XP Home edition recovery

  After the recovery and download of updates and the XP operating system that the screen remains black, bios does not start, and XP does not start.

  What can I do?
  A I press a certain key combination?
  How can I reset the laptop again?

  Who can help quickly?

  Hello Ralf

  Stand by. If I understand you just your laptop does not work.

  What happen exactly when you press the power button / stop? You don't see anything on the screen? You see Toshiba welcome screen.
  Power is ON?
  Is there a any reaction?

  Remove the battery and leave the laptop for some time, connect the power supply only and try to start it again.
  To be honest, this whole thing is strange. Recovery image installation is not responsible for this kind of behavior. Have you done something else that may be responsible for this?

• Satellite C660 - white screen after instalation image recovery

  Strange problem. My Satellite C660D-1FM was a bunch of updates from Microsoft (did not updates for centuries as it was used by my daughter and not connected to the internet) and after completing it restarted and I got the Toshiba splash screen and nothing. Holding F8 gives the same problem, tried turning the key '0' and that was the same. Connected to an external monitor and it's the same thing. I can't get into the BIOS and everything seems fine.

  Then, thinking that the HDD is maybe defective I mounted another drive hard and fully installed Win7 on a Microsoft DVD (SP1 and all updates) and everything works. Then, I thought I try and restore the laptop to factory settings by default using Toshiba DVD recovery which Id created. Worked well during the installation, all the installed DVD 3 and he's gone through the procedure installation, portable got at the end when he tried to restart it, rebooted and now back to the same error - Toshiba start screen is ok, but then he'll just empty. To convince me that I wasn't going crazy I then reinstalled Win7 my DVD of Microsoft and he moved very well, did all the updates and worked all day today with no problem.

  Someone at - it an idea of what's going on?

  Hmmm... something like that shouldn't happen.
  Do you use the recovery disc for the first time?
  Have you noticed the same result on both hard drives?

  Problem is that there is not much to do about it and there is no way to change it either in recovery installation runs, or later during the installation of windows is underway.

  Try to set the BIOS to default settings and simply try to reinstall the recovery image.

• E5 - 511 black screen after installing Windows 10

  Hi, not sure I can ask a question here already?

  Well, this: I improved my longs E5-511 Windows 8.1 for Windows 10. After a cold start, it appears a black screen, until I have press the power button until it stops. Start again, it's OK, although slow. I found discussions on this matter by Google, it seems men to the Intel HD Graphics driver. According to Device Manager, I later. There is a 64-bit device driver Windows 10 on the Intel web site that looks much newer, but it refuses to install it.

  Any ideas?

  You can try the drivers on the website of acer for your model:

  http://us.Acer.com/AC/en/us/content/drivers

  If this does not work, you can download and use the Intel driver update utility.  The best thing to try first the driver from the Acer site.

• blue screen after installing windows update

  Original title: Windows Update system killed 13 March 2012

  After you install the updates Windows yesterday (13/03/12), the screens of the blue system at startup and in safe mode, does not restore system, saying: "a parameter is incorrect."

  Hello

  It is unfortunate to know that you need to perform a reinstallation of the operating system, but there was interference between the files.
   
  You can provide feedback if you have any concerns. Check out the following link.

  http://www.Microsoft.com/mscorp/Execmail/feedback.mspx

• Satellite Pro L40 - sound after installing Windows XP SP3 driver

  Hello

  I bought the Satellite Pro L40 about 6 months ago and the speed of the laptop is too slow with windows Vista. So I decided to install an old copy of windows XP that I had purchased earlier. I updated the windows SP3 installation before installing the drivers.

  Now, all the drivers have been installed correctly except the audio driver. I downloaded the XP version of the driver on the toshiba site, but it did not work. So I though that maybe the vista version would work, so I downloaded that. But that no longer works.

  Can someone suggest a solution where I can get the audio driver to work? Preferably without having to get the reinstalled windows again.

  Please help me...!

  Thank you

  Hello

  Try to reinstall the driver for sound card for XP; Just go here-> [fo Realtek card its Driver XP | http://support1.toshiba-tro.de/tedd-files2/0/sound-20071120150900.zip]

  Hope this helps :)

  Post edited by: iSkO

• Portege R500 - blue screen after installing Windows XP SP3 home edition

  * computer toshiba Portege R500 laptop *.

  * non-modele ppr50e00j00fs4 *.

  SP3 installed via update-site, received successful message SP3 installed restart... now bluescreen an impossibility to restart! Not even in save mode!

  If I try to start with the InstallationRecommandations, I get the following message:

  STOP: 0X0000007E (0XC0000005, 0XF79ED8EB, 0XF79ED7F4, 0XF79ED4F0)

  Can someone help me please?

  Hmmm. seems that this is a known Microsoft issue because I found these MS knwoldge base article:

  How to troubleshoot a Stop error 0x0000007E in Windows XP
  http://support.Microsoft.com/kb/330182/en-us/

  Microsoft has stated that:

  + These problems may occur if a system thread generates the error handler catches not an exception. You receive this error message if one or more of the following conditions are met: +.

  + If this issue occurs after the first restart during Windows Setup, or when the Setup program is finished, the computer does not have a sufficient disk space to run Windows. +
  + If this problem occurs after the first restart during the installation of Windows, or once the installation is complete, the computer's BIOS may be incompatible with Windows. +
  + Incompatible video card drivers. +
  + A chauffeur service or system device damaged. +
  + If the problem is associated with the Win32k.sys file, it can be caused by a control program remote third +.

  I recommend checking the solution proposals published on the website of Ms.

  Good bye

• On Qosmio G30 black screen after installing Windows XP

  Hello world
  I want you help me solve my problem.
  I have a Qosmio G30E - 148 and when you install a new program, the BSOD had been posted. prevents me from having access to windows from
  normal mode and safe mode.
  Then I installed a new Win XP manually and when trying to install the screen to black color display (nvidia geforce go 7600) driver and I turn it off
  safe mode in order to use windows.
  Another favor, I need a driver for ethernet controller and multimedia video controller because I can't find them.

  Thank you for all.

  Hello

  I have several question for you:

  -What system was installed before? Windows Vista?
  -where you have downloaded the display driver? On the Toshiba site?
  -You can find all the necessary drivers in the section download the drivers on the Toshiba site-> http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU
  Simply choose XP MCE as an operating system, the drivers are the same as XPPro/XP

  Hope I could help, if you have additional questions just ask. :)

  Greetings

• VN7 - 592G blue screen after installed Windows 10 anniversary update

  Hello

  This week I installed the last 10 updated Windows on my laptop VN7 - 592G (tried build 1511 upgrade and clean installation, too), however, I still have the Blue error screen. I can't use my laptop, or to do anything because of the Acer is not kept up-to-date of pilots.

  Of course, I installed the drivers of the last Acer of acer.com but Realtek Audio does not work so my computres crashes at startup.

  ==================================================

  Dump file: 080316-7609 - 01.dmp

  Crash time: 2016. 08 03. 0:18:11

  Bug Check String: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

  Bug check code: 0x1000007e

  Parameter 1: ffffffff "c0000005

  Parameter 2: fffff80e'adc68a41

  Parameter 3: ffffb281'd19376a8

  Parameter 4: ffffb281'd1936ed0

  Caused by the driver: RTKVHD64.sys

  Caused by the address: RTKVHD64.sys + 48 has 41

  Description of the file: Realtek (r) High Definition Audio function driver

  Product name: Realtek (r) High Definition Audio function driver

  Company: Realtek Semiconductor Corp.

  File version: 6.0.1.7687 built by: WinDDK

  CPU: x 64

  Plant address: RTKVHD64.sys + 48 has 41

  Stack address 1:

  The stack address 2:

  Address 3 the battery:

  Computer name:

  Full path: C:\Windows\Minidump\080316-7609-01.dmp

  Number of processors: 8

  Main version: 15

  Minor Version: 14393

  Size of the dump file: 411 988

  File dump: 2016. 08 03. 06:40:05

  ==================================================

  Hi all

  I'm sorry for the delay; first of all, I want to thank you all for your patience as we worked to solve this problem. Second, I have been informed that we had a new audio driver released for the VN7 - 592G, version 6.0.1.7910, and it is now available in the website of drivers and manuals.

• Problem with the resolution of my screen after installing Windows on my ASUS laptop K51AE 8.1.

  At first I used the Windows 7 operating system before you download and install the student version of Windows 8 on my ASUS K51AE track. I fully configured my laptop with the new software setting with my own parameters before noticing that everything on the screen seemed very pixelated operation and large, in order to solve the problem, I tried improving the resolution to something higher up on the list but unfortunately I was not given another option to go to. The laptop is locked for the resolution of 1024 x 768 when I used the resolution of 1920 x 1080 front on Windows 7. I'm still not able to click / tap on the option of the current setting of 1024 x 768, I don't know why this is happening? Please ask help?

  Hello

  You must download and install the latest graphic drivers of Windows 8/8.1 ASUS for your machine, as it has been defined for Windows 7.

  If none are available, you will need to upgrade, if you can, your graphics hardware to solve the problem.

  Normally, you would have embedded chart that you can not change

  ASUS:

  http://www.ASUS.com/support

  See you soon.

• CD/DVD on Satellite U500 drive failed after installing Windows 10

  My CARPET * drive dvd DVD - RAM UJ862AS failed after W10.

  I told myself I need Toshiba ' * 86 device ACPI Compliant added logic and general use "BEFORE I can install the driver for the DVD drive.
  I tried Microsoft idea to remove the pilot of regedit and restart the laptop that should logically result in reinstalling the driver... with no luck.

  I'm about to give up the laptop but am wondering if anyone can help me?

  I am extremely reluctant to lose a lot of money on several unnecessary drivers (generally unreliable) providers!

  U500 is old piece of hardware and not supported for Win10, right?

  In any case, what is the status in Device Manager? Is ODD listed here or you just entered with device "unknown"?