Re: Satellite M100-221: screen turns black, moving display

Similar Questions

• Satellite M70 - 340 - the screen turns black after that charge BIOS

  Satellite M70 - 340 screen turns black after that BIOS loaded. Please help

  Hi Totius,

  This means after the Toshiba BIOS screen, nothing happens or you tried upgrading the BIOS? Maybe you can explain that it still a little more detail.

  The problem is in this case you can t a lot because this problem of material based on s.

  You can try to remove the battery and the AC adapter at least an hour. Then connect the two devices again and try to start your laptop.

• On the Satellite A210-14 t LCD screen turns black randomly

  For several days, I have the problem, my lcd screen turns black all of a sudden, the 'photo' is just disappearing. but the backlight is still and the system is still running (which happens most of the time in battery mode)
  When I close the laptop, pc goes into stand-by mode and so I open the pc again and the screen works again
  But this isn't really a solution.
  What can I do? Fresh grafix drivers are installed.

  BTW:
  I use WinXP

  HM, how long do you want the machine. Maybe you should check the powersaver for battery operation parameters when the display is sharp because it can be a characteristic powersaver the screen turns off.

  If please check your powersaver settings and set the time when the screen turns off at maximum or turn it off, then check if the error appears again.

  Would appreciate the your part feedaback. :)

  Welcome them

• Screen turns black during a short period of time and after 5 seconds on the Satellite A200-1DN

  Hey there
  I have a little problem with my computer, when I start a game, more games, age of empires 3, nfs most wanted, grand theft auto: vice city etc, the screen turns black during the game and then corrects itself after a few seconds, it becomes boring xtremely, especially when you are in the middle of something.
  After that the game closed in the lower right of the screen in the taskbar, a pop up appears saying my display driver has stopped responding, resulting in at least 5 different file names that have stopped responding.

  I have a Toshiba TFT screen with direct x 10(which might be the problem with the older games,i think!).
  Any help would be appreciated.
  My computer configuration is the graphics card with 1.5 GB of RAM, vista and intel 950 processor intel dual core.
  THX.

  Have you tried to play a game designed to run under Vista OS or you have noticed that play WXP games on your laptop preinstalled Vista. If possible, try to get the Vista game and test it again.

  I wonder if something goes wrong, while playing older games WXP on Vista platform.

• Satellite M100-221: Solution Possible BSOD / sound + mouse problem

  Hi all!

  Recently my Satellite M100-221 started crashing and freezing, so I reinstalled Windows XP.
  However, some problems are still recurring.
  First, before posting that, I browsed all the forum and found a few questions from people who are experiencing a BSOD (blue screen).

  I solved this problem by removing HWSetup programe of PC (because, as he wrote on the blue screen, its driver was causing a problem).
  All who have this problem should consider all the software Toshiba, because maybe this is the reason.

  However, I have 2 questions.
  First of all, which is my mouse (and touchpad too) just occasionally freezes for a second.
  I tried different mouse - but it's the same thing. (It may not be the connected with the performance of the CPU, because before the re - install XP, I didn't have the problem).

  And secondly is connected with sound - noise from time to time (whether it be the music play or simply 'click' sound effect) freezes just - which makes the periodical "trtrtrttrtr" - like sound))) that the two problems are so boring - because you just can't help the note!

  I've got drivers provided by Toshiba - maybe the problem is with them?
  So should what drivers I expect?

  Please, someone, help!

  I solved the problems and it took almost two days to determine what the problem is.
  Well, I read a lot of discussion on the failures of sounds, mouse freeze and so on. But there is always only one advice: updating drivers, BIOS, etc, etc. After two days, I have updated all the drivers on my laptop, updated the BIOS and fact repeatedly - but all that was * _completely useless_ *.
  I've got Intel Centrino Duo processor - so I started to experiment with a single core enabled - play music and watch videos and watch to the works of the processor. According to the process manager, got processor loaded at 50-60% of its power every 2-4 dry. And it turns out to be Hotkey.exe! Toshiba utility! This means that software of Toshiba's just unnecessary powerful processors, because this software is completely unprofessional. I have nothing against Toshiba - laptops are one of the best, but they should at least try their own software before distributing it with their PC.
  So I guess some problems with your laptop, mates, can be solved by turning off unnecessary all software and utilities Toshiba - just them clear in the automatic boot menu.
  Good luck!

• Satellite M100-221 - PXE boot error message

  Hello

  I own a Toshiba Satellite M100 221 and when I turn it on it says

  PXE e61 media test failure
  Check cable pxe moF output
  Intel boot agent
  operating system not found

  I downloaded a program called Hiren Boot Cd and I he burned on a Cd and then I ran it if the 221 m100, then I loaded Windows XP Mini. I went into my computer and I don't because my partition B called drive Ram Toshiba himself. Where is my C partition? What happened to my PC? I think that the hard disk is dead. Is it?

  Hi lekhB,

  > I think the hard drive is dead. Is it?
  Is that the HARD drive is listed in the BIOS?

  If this isn't the case, it seems that the HARD drive is faulty, but in General, the PXE message means that an incorrect boot order is set.

• When I start my Satellite A300 the screen remains black

  When I turn on my Satellite A300, the screen remains black and doesn't change at all... Any help please?

  What is password problem in your other thread? Already solved or what?
  If the problem persists, I don't see any sense to start this thread because people don't understand what the problem is.

  Please do not mix two questions and explain exactly what you see on the screen after turning on your laptop.

• Cannot install driver LAN on Satellite M100-221

  I have reinstalled the OS on my Satellite M100 - 221 PSMA0E.

  HE has already used Windows XP Home Edition, and now I have installed Windows XP Professional SP2. I have an error in my DEVICE MANAGER with ethernet, mass storage controller, SM bus controller controller. But let's for ETHERNET CONTROLLER.
  I have download the real LAN driver on the official website of Toshiba, and whenever I try to install it I get the message "the specified location contains no information about your hardware.
  In the wizard NETWORK UPADATE I have same option to choose the Realtek driver, only Intel and a few others. My network card was working very well on XP Home edition preinstalled. What am I, I guess what to do? Help, please!

  Hello

  I guess you should try drivers intel instead of the realtek because drivers that your computer was shipped with a chipset Intel LAN.
  So, please visit the website of intel (www.intel.com) and download the latest drivers LAN from their homepage.

  It should work and you should soon have a working ethernet connection.

  Concerning

• Satellite M100-221 with Win 7 - issue Fn after PVAT site amenities

  Hello

  I installed windows 7 on my toshiba satellite m100-221, with 5.60 bios, I had problems with installing the chipset drivers which I downloaded from the toshiba Web site.
  Finally I downloaded the drivers from the site to intel. I realized that my Fn keys are in operation, but only Fn + ESC, F1, F5, F6, F7.
  So I tried to install PVAT that contains Flash cards.
  Everything seems to work properly, some Flash cards began, I could use them with the mouse, BUT NONE of the Fn keys worked.

  Now, I'll try to uninstall, reinstall, but without success.
  When I disable flash cards at the start that the Fn keys work, when I start it, it seems that Flash Cards takes controll keys Fn and disable them.

  My laptop is able to vista and I also tried to do the same thing with vista, but with the same result, all Fn are disabled when the cards are running.

  It is important for me to use Fn + F8 to switch to the radio wireless and Fn + F4 to Hibernate.

  You have ideas or experience how to fix?

  Thanks for help.

  > So I tried to install PVAT that contains Flash cards

  Win 7 needs the VAP (additional package) and you need to install the additional Flash Card Support utility!
  Win 7 Vientiane does not contain Flash cards! You must install separately.

  Take a look on the Satellite L500 driver area.
  You'll find the VAP and Flash Card Utility for Win7

  I recommend reinstall these two tools again

  Welcome them

• Problem with the display for Satellite M100-221 driver

  In the section of the driver of this site, I can download the display driver for my SATELLITE M100 - 221 (PSMAE0).

  There are Mobile Intel 945 Express Chipset
  For Windows Vista, I can download the dirver:
  17/10/07 display driver Intel Windows Vista 7.14.10.1227

  But for Windows XP driver for ATI chipset:
  21/11/07 Display Driver ATI Windows XP 8.283

  Where can I get display driver for Intel 945 chipset for Windows XP?

  PS: Sorry for my English, I hope you can understand me =)

  Hello

  Recheck the Toshiba download page. It seems that Toshiba has seen your ad here. ;) Driver Intel is now available.

• Satellite M100-221 - energy saving does not work - fatal error

  My laptop Satellite M100-221 the energy saver is not woarking. I get this annoying message:
  http://up109.arabsh.com/s/42gi7dkhum.jpg

  I try to reinstall the driver, and towards the end of the installation a message appears:

  C:\Progra~1\Symantec\S32EVNT1. DLL. a virtual device driver installable failed initialization of Dll. choose 'close '? to complete the application.

  Satellite M100-221 belongs to the series of PSMA0E.
  Toshiba page European pilot plans and pilot Power Saver and the Power Saver utility.
  I recommend first of all remove the system energy saver.
  Then after reboot to clean the BONES and the registry using the CCleaner.
  Then, install the driver Power Saver 2.40.0.1C and Power Saver, utility 7.03.07.C

  Good luck

• Satellite M100-221: can I use 2 GB memory module in a slot?

  My Satellite M100-221 currently has 512 MB of memory and I want to bring to 2 GB. Is it possible to expand the memory by adding just a 1 x 2 GB memory in the expansion slot available? Or I have to put a matched module (2 X 1 GB)?

  Hello

  As far as I know it of possible to upgrade the memory to 4 GB max.
  That's why one a bank should be able to handle the module memory of 2GB.

  So it of your choice if you want to use a module of 2 GB or 2 x 1 GB modules.

  Greetings

• Movie Maker: saved big screen turns black during playback

  Movie Maker project works well but saved movie screen turns black during playback. The music plays but not all images. I saved the project as a movie 4 times and each file size is another. Makes me think that images are not saved to the film.

  Movie Maker project works well but saved movie screen turns black during playback. The music plays but not all images. I saved the project as a movie 4 times and each file size is another. Makes me think that images are not saved to the film.

  ====================================
  A few things that might help...

  There may be a compatibility issue with some of your
  source files. Convert your audio files to the. WMA
  format before you import into Movie Maker can be useful to
  a try.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Also, before you save it... go to... Tools / Options / Compatibility
  tab and disable all filters / OK.

  It may be interesting to try to save the project in DV - AVI format...
  (the file size will be much larger, but the result may be better)

  XP Windows Movie Maker 2.1...
  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  ===

  There may be a compatibility problem with music
  files. Convert to WMA format before importing
  worth try in Movie Maker.

  There are to many converters available on the net...
  Some are free - some details... the following freeware
  is but one example. :

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake - Free Audio Converter
  http://www.Freemake.com/free_audio_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  When you have installed Freemake... Open Freemake
  and drag and drop your files music on the main screen.

  Or... Click left on the Audio button, then navigate to the
  your audio files are saved in the folder.

  Select (highlight) the files you want to import into
  Freemake and left, click on the button 'open '.

  When your music files are imported into Freemake,
  On the left, click on the WMA icon at the bottom of the screen.

  The "Output settings" screen opens.  Choose
  ' Save in ' file so you can find the converted files.

  On the left, click the "Convert" button and the files must be
  converted very quickly.

  That should do it...

• Screen turns black and does not return. One stop forced

  When I leave my computer for a while, the screen turns black and does not return when I press 'enter', or any other key.  I do a forced shutdown (turn off with the power button).  Can I get, and the "incorrect closing" message when I turn on computer. I think that it is a problem of Hibernate.  Any ideas?.
  MMM

  Original title: hibernation problem?

  What happens if you press Ctrl + SHIFT + ESC when you want to get out of hibernation?

  You use a wireless keyboard and mouse with a transponder. What happens if you press the button on the transponder?

• BlackBerry smartphone screen turns black in the Blackberry Bold 9900, but everything else, keys, touchpad screen and keyboard still works.

  It is a problem, I think that many have known, but there is no real solution to the problem. However, initially all of a sudden phone has begun to show an error (can't remember not exactly what, but something related to something does not turn) and the screen locked with constantly showing loading circling constantly clock and the narrowing of the battery quickly. what I've done; Hold the alt + right shift + del (twice) to restart the phone. Restarting the phone, the screen turns black (which indicates there is neither power or the screen itself issue and it's just a matter of graphics functionality). The phone restarts you black screen, the phone clearly charged the software couple received messages (indicating the phone works and the network also works). The phone rings again and the touchpad works if you know by heart, keyboard and the short keys for speed dial works (which means that yo can call), but the screen turned black. I think it's graphic material rather software number. I tried to do all sorts of stuff and things, did not work. Finally, I decided to restore the Blackberry software (running the latest version 7.1) so I plugged it in to the computer and run terminal BlackBerry Desktop to perform an update failed with this error: "an error occurred when downloading the BlackBerry® Desktop software. Please try again. "and offered to launch the"regsvr32 ole32.dll"in order to connect to the Blackberry server to do the update. tried, restarted my PC, plug the unit again removing battery, replacement and tried again, keep showing the same error. I tried all the advice forums, youtube videos and even troubleshooting I contacted Microsoft (running windows 7 64-bit), server connection module installed and works perfectly still having the same problem.

  I hope that blackberry had a clear answer to these questions and have someone in the customer service who can solve the problem instead referring users to the forum!

  Anyone who had experienced the same problem and found a solution, please respond. your help would be much appreciated.

  Thank you.

  The GPU is integrated into the cpu, so the phone would not ring or the touchpad does not work. It is possible that the phone fell or anything that could cause the connections on the motherboard to disconnect, I gave up my 9930 and causes the connector unplugs. Would you feel comfortable taking apart? It's easy, I think you could look up how do on YouTube. I could help you if you are on Central time or Pacific.