Installation of drive HARD recovery does not start on Satellite P300-150

Similar Questions

• Recovery does not start on Satellite P200D

  I have a satellite P200D and I need him back due to a virus.

  Now, I ordered the recovery media kit and when I want to start it it does not start. The manual said, put the DVD, restart the computer and press F12 when the massage "In Touch With tomorrow TOSHIBA" poster.

  The message is not shown in the configuration and the recovery does not start.
  When I press F12 at startup is also the recovery does'nt start.

  What I am doing wrong?

  How can I get my laptop back?
  Any ideas?

  Hello

  You must boot from the disc.
  This means that you will need to insert the disc, have to turn on the device, choose ODD as boot device and this will start the recovery process.

  Try this!

• Drive HARD recovery does not not for Satellite Pro L450D-12 x

  I have a laptop that I'm fixing for a friend.
  According to toshibas official specification it is than a HDD recovery partition which is hidden.

  For a reason unknown to me, now the 0 (zero) key does not work. F8 does not work either and the windows system restore does not seem to get me there either.

  Can someone please explain to me why this is happening?
  Nobody ever touched the hard drive on the alleged recovery hidden partition which is toshibas official specs 100%...

  Anyone share a few ideas with me here please

  Kind regards
  Andrew

  Hello

  The HARD drive recovery partition is not hidden
  In my case the image files when placed on the second partition in Toshiba HDD folder.

  However, the fact is that HARD drive recovery could be launched by pressing the F8 key, and then choose the option called repair my computer and in a new window the recovery HARD drive option should be chosen.
  If this is not possible, then you will need to retrieve the laptop using the recovery disk.

  I guess that this disk is not created in the past. Right? You can create the disc using the recovery disk creator which is preinstalled on all Toshiba laptops.

  If this is not possible, then you must order the CD here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Satellite L670D pirate, drive HARD recovery does not work

  Hey guys,.

  you have the following problem: My L670D hacked by some * s and now I'm still trying recover the power. I heard about Toshiba HARD drive recovery, which should work by pressing F8 during startup. I tried several times, but I think something went wrong and nothing happened.
  Can someone help me by telling me where my mistake is? I want to just my laptop back!

  For those who encourage me to install Windows again: I have not any DVD, cause he was already on the laptop when I bought it (Win 7 64-bit).

  Please please please help me!

  Merry Christmas to you all!

  Gr4phixX

  Hello

  As described HARD drive recovery work on follow Toshiba document -.
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

  Try to please and send some comments.

• Satellite L670 - the system HARD drive recovery does not start

  Hello together,

  I have a problem with my laptop. I installed Windows 7 Ultimate 64 bit, that the laptop came with Win7 Home Premium 32 bit.
  Now I want to restore the original Windows Home Premium. On the laptop is a second partition with a folder named "disk HARD recovery.

  When I hold the button '0' on start nothing happens. The beginning of doesn´t of system recovery.

  Can you help fix the problem.

  Thank you and best regards,
  Dinder

  Hello

  This does not work because you have installed Win 7 64 bit as you said here:
  > I installed Windows 7 Ultimate 64 bit, that the laptop came with Win7 Home Premium 32 bit.
  But have you tried also pressing F8-> fix my computer-> drive HARD recovery?
  Try this

  Otherwise, drive HARD recovery does not work because the boot manager has been changed or damaged as a result of the new install of Win 7 and this is why you cannot load HARD drive recovery.
  That is why it s always recommended to create a recovery disc before changing anything on the HARD drive.

  What to tell buddy you need recovery disks. I guess that you have a European model for laptop

  You can order the recovery discs here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Windows 7 upgrade failed - disk HARD recovery does not work

  I just received my Windows 7 upgrade disc, followed the procedure and he managed to upgrade Vista 64 bit for Windows 7 32 bit! Some drivers also seem to, were charged more than once.

  I tried to do a system restore from the recovery of HARD drive partition - and it won't!

  Can someone, please?

  Hello

  Drive HARD recovery does not work because Win 7 ran the Boot Manager and maybe the HDD partition has been affected.

  I guess you want to roll back to Vista preinstalled Toshiba.
  I think in your case, only the recovery disc will help you.

  Welcome them

• One - Key Recovery does not start in the recovery system (y450)

  I am running Windows 7 on a y450 and want to restore a system backup or a factory default. My installation still works, but I would like to go back to an earlier time before some files have become corrupt. No sheet music have been published. I made a backup of the day system the first that I turned on the machine. However, I do not have ' engraved it on an optical medium.

  I followed the video to find out how to start the system recovery:

  http://consumersupport.Lenovo.com/video/PlayerPage.aspx?VideoNo=32&country=OT&lang=en

  Through the software in Windows to restart, nor from the computer by pressing the recovery button will start the computer into recovery mode - rather the computer starts just to the top as usual in Windows 7.

  I have restored my BIOS to the default settings, but the y450 still does not start in recovery mode.

  How can I start the computer into recovery mode? Yet once, I tried to go through the software under Windows. Just, it restarts Windows and starts as usual. I also tried to stop the laptop computer, and turn on by pressing the recovery button, but it just run Windows as usual.

  Help, please!

  Download ptedit32

  1 extract the utility and run as administrator.

  2. at the top, you must make sure that it's your hard drive
  1 [If you have connected a flash drive that can change]

  3. depending on what you were doing, you two or
  three partitions, but it should be the last.

  4. for the last partition, select the number under type and
  Change it to 12.

  5. at the bottom right, select save changes, and then click ok.

  6. restart your computer and check what is hidden
  partition is no longer visible.

  You should now have novo button works again

  Thanks to ortegaluis.

• Ran Disk - finished - Restart - Recovery does not start

  I had a problem with my HP DV7 - 4069WM Notebook PC, and I was only left with one choice. Order and use the recovery disc. I got the recovery disk and it ran; Then it said that the recovery is over and it restarts. After reboot, it is, it does not start, it's just stuck on the HP logo. I have try the ESC, F keys keys #, the only feedback I get is these error noises. Help.

  Hello:

  If you remove / unplug the secondary HARD drive the PC gets stuck on the home screen?

  You can try to install W7 using this workaround solution.

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Research in Motion driver device network does not start

  I spent the last two days, trying in vain to connect my playbook with my computer via usb.

  I tried a lot of things I've read on the messages that other people have done to solve similar/identical problems, but none of them have absolutely made no difference at all for me.

  Quick summary:
  -The playbook has updates.
  -The usb cable is fine as the playbook connects correctly to a different machine of windows 7.
  -The usb ports are fine (tried many of those on this machine), other devices connect without problem.
  -Have you tried Blackberry Desktop and Device Manager, 7 and 7.1.
  -Playbook has wifi off and regular file sharing on.
  -Have you tried to adjust the 'windows' and 'auto-detect' options of connection on playbook.
  -I uninstalled/installed the Device Manager, Office Manager and the individual drivers several times, with and without restarting the computer and the playbook.
  -Turned off firewall and anti-virus
  -Removal of all applications start and all non-microsoft services.
  - And many other things that I forget immediately.

  I don't think that anything I have read that I have not has tried.

  The problem is very specific. The network adapter (Research in Motion Network Device) seems to be able to install correctly but does not start. After installation, for a few seconds, it is said works normally, then change to the yellow triangle with exclamation point and Driver Details indicates that he failed with code 10, although sometimes the error number is different.

  I watched the windows event logs and it has entries by the driver, not to start but no explanation as to why.

  Has anyone else had this problem? And if so, what can I do about it? Please, I've spent days messing around and I can't spend more time on this nonsense.

  It's weird, I never had a problem one of my devices Android or Apple connection to this computer, only this device. Very discouraging.

  Hello

  There is some information on blackberry - deploy here:

  https://developer.BlackBerry.com/native/beta/documentation/com.QNX.doc.native_sdk.QuickStart/topic/r...

  It's for BB10, but it works on the PlayBook as well.

  You must enable the developer mode on the PB. The IP address is the general number of the machine's IP - that gets it to your wireless infrastructure - not the INVESTIGATION period specific developer, which I think is only used for the USB connection.

  The problem with the deployment on wifi, it's BB tends to close the wifi interface, if you do not use it for a while. So, I think that before you deploy, I often use the Web browser on the BB to wake up the network.

  It's all a bit wildfire, to be honest. I'd rather have the USB works, but (for me) which could be a Linux issue, not a BB one.

  Best wishes

  Kevin

• TPSMain.exe does not start on Satellite U400 - 14 p PSU44E running Win XP

  Hello

  I installed Windows XP Pro SP3 on my U400 PSU44E - 14 p.
  I found all the drivers on the official website of Toshiba (thank you) but one in the origin of the problems: TPSMain.exe does not start when I start the computer.

  Once I type my password and login, I hear a typical Windows error sound, but no message is displayed. I noticed that when you try to start the Toshiba Power Saver utility from the Control Panel, I got an error message telling me that I have enough privileges to run this utility...

  I am the administrator!

  If you guys encountered the same problem and got a hint of trouble, feel free to post here. THX.

  I have a Toshiba Satellite U400 and I installed Win XP too.
  I have a user account administrator and Toshiba Power Saver works properly!
  No problem don't like on your system!

  However, in the Toshiba Power Saver Settings (installation options), you can find the option called limited allows the user to change the settings and allow different actions for each profile.

  Check that both are enabled!

  If this doesn't help then reinstalling again this tool.

• Drive HARD Win 7 recovery does not work on Satellite L750

  Hello

  I have the Toshiba Satellite L750 with preinstaled win 7.

  I instaled the upgrade to win 8 (from dvd).

  After that I improve the MS site to Win 8.1 System.

  The system does not work properly (DVD is not recognized) so I have to install previuos system.

  First of all, I'm improving my BIOS for the new one - 3.60.

  After that I try to win 7 reinstal my HDD recovery (which is located on the d partition). But it does not work: it has been impossible to start recovering in the menu of the bios (F8 key does not work, it was only possible to press F2 or F12).

  So I have to install my dvd 8.0 Win and now I have it and it works. But this is only a clear system without any addons like nero, ms office etc.

  My question is how do reinstal win 7 of my hard drive recovery that I always on the d partition?
  in the bios the F8 key does not work.

  After clean OS installation installation of HARD drive recovery not working anymore. If you want to have the original image of recovery preinstalled on your machine, you must use recovery DVDs.
  I assume that you did not create this disc, right?

  In the user s manuals document clearly described how it works with the image recovery and the creation of recovery disks.

• HP Pavilion Slimline S5: Internal HARD drive failure, PC does not start

  Drive HARD internal of my HP Pavilion Slimline S5 failed and died recently (bought in 2011). My HP warranty is long gone.

  The splash screen has shown this message:

  1720-SMART hard detects an imminent failure

  Due to lack of player: SATA0

  Failed attributes: # 05

  I have several questions about this:

  1. Is it only caused by HARD drive failure? I want to replace it myself, but I don't really know if there are other parts to replace. Or it will be better to bring it to the computer shop to do carefully check?
  2. I can replace it with Seagate Barracuda 3.5 "(7200 RPM, 1 TB, SATA 3 or 6)? I think that the current HARD drive is Hitachi.
  3. I still need to transfer Windows OEM once the HARD drive is replaced?

  Thanks in advance.

  According to the packing of the Seagate, it might come with the software.  But if it is OEM drive then found the software by clicking HERE.  In general, I use a USB adapter for hard drive to clone if the PC will not support an additional drive.  Given that a number of incomplete model for the PC, it is difficult to find accurate info, but the Pavilion Slimline S5 I checked all have a motherboard with additional SATA ports.  Just have a spare SATA cable and power on the power port and try the cloning software.  Make sure that the drive is not touch a conductive element.  Usually, I place the additional reader on a cardboard box.

  Install the new drive as a replacement for the existing drive and connect everything as it is now.  Then connect the old drive in the manner discussed.  Boot from the CD created with cloning tools.  If the old drive is cloned stll, then when the software is finished, remove the old drive connections to see if the drive can start the computer.  If this is not successful, try to run the recovery screen (F11) BIOS boot manager.  If that does not work, use the Recovery DVD set brand when the computer was new.  If you did this, or lost them, then see THATto order a series.

• Is it possible to extract personal folders from my hard drive and transfer to an external hard drive if Windows does not start?

  Hello, I recently started my Windows XP Dell computer and it should start up normally unless it would run the ChkDsk utility. It would freeze then 68% on stage 1 and goes no further. I called the people of Dell and after trying so many solutions, including safe mode, safe mode with network and CommandPrompt, we ran the diagnosis. The hard drive and memory are fine, no errors. He concluded that it was the operating system and must be restored. However, I have important files, I need to extract from my hard drive and he recommended me an external hard drive. I bought it, but now I'm not sure how to extract my files from my drive hard if Windows can not even boot the desktop computer. Is it possible to extract these files without the use of the desktop computer?

  And you've burned the .iso image, and not as data? If Yes, then you have created a bootable CD. Put it in your optical drive and restart the computer. You may need to change the boot order in your BIOS. With some machines, you can get a temporary startup command menu by pressing a function such as F12 at startup. Other computers require that you enter setup and change the boot order in the optical drive first of all from there. When you start your computer it will be information about which key press to enter the BIOS (Setup) or give you the temporary boot order.

  After you changed the boot order to boot first from the CD and rebooted the computer, Knoppix will boot. Have your external hard drive connected to the computer before you start doing this. After Knoppix is finished booting, you will be in his office. It will be very similar to Windows. There are icons on the desktop for your internal hard drive and the external hard drive. Copy files from the internal to the external drive as you want. Review what I wrote about the use of Knoppix in my previous answer. MS - MVP - Elephant Boy computers - don't panic!

• Error with product recovery. Now, does not start. Satellite Pro A40

  Hello

  I tried to use my product recovery cd to reinstall windows so that the computer is in "like -new" condition However, when you use a disk and 25% step it crashed on saying me that it couldn't read the disc. Now, when I try to boot, it says ' Please insert system disk and press a key "I do, but I just get the same message repeated. This is if I try to book it from the cd or the hard drive.

  What is my next step, how can I pick up my computer!

  See you soon

  Hmmm it's not easy to say why you t could not complete the installation. For me, it seems that the recovery CD is defective.

  In any case, the message said that no BONES were found on the HARD drive and the laptop cannot start!
  While do I think you should insert an original Windows XP CD and try to boot from the CD. The XP CD should format the HARD drive and install the new OS.

  Sorry, but I put t see another possibility.

• My USB stick recovery does not start at startup...

  Is anyway for me to burn another disc to restore DVD, as the USB that I did does not work.

  So my other question would be is anyway to get the USB from startup to startup. I checked the content, and there factoryrecovery and start-up of 2 files. Anyone know how ot he can begin. If I can just to start I have ot burn another copy of the recovery image.

  Thank you in advance. I'm having the time more difficult re - install the system on an SSD.

  Is it a USB hard drive or flash drive?

  If it's a flash drive, setting the active partition may leave start.  Lenovo has an Emigrated here somewhere (sorry, the search function is let me down all at the time) which describes how a preparation flash drive before creating media of relief on this subject.

  I found that put asset _apres_ creating usually makes bootable - if that was the problem.

  Use the command line DISKPART windows or Linux fdisk utility to set the score of the current drive.  Do not clean, or format.

  [edit] It goes without saying, but I'll say it anyway.  Incorrect use of any disk formatting tool can trash the disk target or any other drive in your system.  Use with caution.

  If it is a hard drive that you're talking about, I don't know what to think.

  Z.