Re: Satellite P50-A14G - unable to connect to the internet using a wired connection

On my laptop, Satellite P50-A14-G, I can't connect to internet via wired connections.

WiFi does not work properly, but not the Ethernet card. It has not any light when I connect the wire, and I realized that on the Panel of the map icon does not appear.
My OS is Windows 8.1 update 1.

Advertisement

Hello

Have you checked status LAN card in Device Manager?
Please make sure you that network card installed, listed and active properly.

Tags: Toshiba

Similar Questions

  • Unable to print from the Internet using HP printer psc 1210

    Original title: hp psc 1210 printer xannot can be identified by my laptop Viao soni

    I'm unable to print from the internet. This problem has not occurred before.
    What should I do or change the setting to be able to print again.
    Thanks for your help.
    Darius

    Hi Nicolas,.

    This problem may occur if the printer driver is corrupted, outdated or incompatible.

    1. what web browser do you use?

    2. the problem occurs with all web browsers?

    3. deal with any problem while printing from the computer?

    4. do you receive any error messages? If Yes, what is the exact error message?

    Method 1:
    I suggest you try the procedure described in the article, if you are using Internet Explorer 9.

    You receive a script error and are unable to print from Internet Explorer 9
    http://support.Microsoft.com/kb/2652062

    Method 2:
    If the problem is not resolved, I suggest you try the procedure described in the article and see if it helps.

    I can't print or preview before printing a Web page in Internet Explorer
    http://support.Microsoft.com/kb/973479

    You can check the link for more information:

    Solve printer problems
    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • Unable to connect to the internet (using a wired connection or wireless) after a power failure, error "the cable network is disconnected"

    After a power outage, I can not connect wireless (cannot connect even with the wired ethernet cable); get message "network cable is unplugged", which is not.  The cable modem work properly in wireless mode with two other computers.  System to an earlier date of reload and change the cable has not solved the problem.  Running Windows XP.  Any suggestions?

    Hello

    I suggest to follow the steps provided and check if it helps.

    How to troubleshoot the following message appears in Windows XP: "a network cable is unplugged": http://support.microsoft.com/kb/910389

    Hope this information is useful.

  • computer laptop Windows 8 shows a BSOD (Netio.sys) to connect to the internet using a wired connection

    Hello people. It is my first question to the community.

    I've used windows 8 (OEM) language unique for appx 1 year and a half. After the recent update to 8.1 windows my pc started to show problems (Explorer froze frequently and BSOD occurred randomly). so I decided to go back to windows 8 and refreshed my pc. It worked well until the appearance of BSOD indicating that an error NetIO.sys started to hit my PC a few days ago. According to the error I reinstalled my network adapters. but nothing gave me the solution.

    I enclose the mini dump with the question files. Hope someone can help me.

    link to minidump files:

    https://onedrive.live.com/redir?RESID=4D9117F418D8169B! 879 & authkey =! AMjclf0nAjOnx9g & ithint = the file % 2czip

    GB

    Regarding the update to 8.1, any device with a driver for 8.0 will be developed 8.1 What are essentially the same, and Microsoft requires all uses to 8.1.

    The BSOD is a combination of things Quick heal may have worked for decades, but may have installed something else which is in conflict with it.  In all cases, your choice is to leave it and crashed or replace it with something that does not work.

    BTW, I do not work for microsoft have therefore no control over what they do.

    You will need to keep refreshing to 8.0 and IMHO, there is nothing worng with 8.1 you may be better served by finding out why you had problems with 8.1 I suspect that you updated to win 8, I'm good?

  • When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

    Unable to connect laptop (wireless) broadband

    Recently, I changed to wired broadband. When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

    Remove any preconfigured network settings wireless then rescan to make new connection settings

    Hope this will do the needfull

    Please let us know

  • Unable to connect to the internet using Firefox or IE

    Unable to connect to the internet using Firefox or IE. I can ping other pc on my network home and can ping websites such as google.com. Other PCs on the home network connect without problems. Nothing has changed in the network or the configuration of IE/Firefox. The only change is that I have installed the update to Vista SP1

    Hello

    Stack TCP/IP Winsock settings in Vista has probably been corrupted.

    Journal to this page and scroll down, there are instructions for Vista.

    http://support.Microsoft.com/kb/811259

    Jack, MVP-Networking. EZLAN.NET

  • Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

    Original title: Auntie Photon

    Hi all

    I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

    Help, please.

    Hi Varun,

    Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

    Please help me with the following information related to this issue:

    1. You have installed the required software on your computer which came with Auntie Photon?
    2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
    • Press Windows Key + X.
    • Select Device Manager.
    • Check if there is no error or exclamation point under Auntie Photon.

    This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

    Please follow the steps mentioned below:

    Method 1: Run the hardware troubleshooter

    The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

    1. Press Windows key + W on the keyboard.
    2. Type the Troubleshooting in the search bar and press Enter.
    3. In the Troubleshooting window, click show all in the left pane.
    4. Click hardware and devices.
    5. Click right on material and devices and and select run as administrator.
    6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

    If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

    Method 2:

    Note: Make sure that the Auntie Photon dongle is plugged.

    Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

    1. Press Windows key + X on the screen.
    2. Select Device Manager.
    3. Expand the network adapter and right click on driver and select Uninstall.
    4. Restart the computer.
    5. Windows will automatically load the drivers.

    Step 2:

    You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

    Windows Update: frequently asked Questions

    You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

    Please answer us on the State of the question to help you further.

  • Need help to connect my ibook G3 to the Internet using Airport

    Hello
    I recently bought an Ibook G3 and unable to connect to the internet using Airport. I can find my internet provider and it allows me to enter the password for it, but after I have get the same message:
    "An error has occurred all trying to join the selected airport network. -3151.
    the password is correct, so I don't know why its not connecting.
    I checked the map, and everything seems OK.

    the Ibook is a Mac OS 9.2

    version Mac OSZ1 - 9.2.2

    Help, please! -J' I feel like IM going crazy trying to get it to work

    .

    Older hardware uses a different protocol and the later models of wi - fi security, so

    It may be that the unit is able to see the signal available but not able to use it or connect.

    In order to set up an AirPort Base Station wireless vintage separate from any modern

    wireless local area network is a way to use a less secure configuration wireless computer older

    and without compromising the latest systems which would share a reduced security wireless

    If you want to reduce the overall security of the system (using the old protocol WAP,

    WEP, etc.; drafters WPA2 +) and base stations can be more difficult if they

    also have more than one type of signal. Older computers use less bandwidth.

    At this point, I cannot possibly be a great help; short of reading thanks to my favorites

    old pages (and check if the pages still work online) reference to use the installation program.

    My setup wireless WPA2 but earlier use AirPort Express base; and also have older

    base station AirPort Extreme 54 k White orb on-site; but not currently enabled.

    To have an additional wireless hardware for use with vintage computers.

    Good luck in this case!

  • Friday at 530, we were able to get on the internet using Firefox. 21:00 we received a message "Unable to load page" but were able to go to Internet Explorer and get online. HELP I want MY FIREFOX to come back!

    Friday at 530, we were able to get on the internet using Firefox. 21:00 we received a message "Unable to load page" but were able to go to Internet Explorer and get online. HELP I want MY FIREFOX to come back!

    See this support article - difficulty of problems connecting to websites after Firefox update

  • Windows cannot connect to the Internet using HTTP, HTTPS or FTP. __This is probably caused by settings of firewall on this computer. __

    I recently installed the version of Norton, after that I was unable to use the internet, I thought it was the Norton firewall settings. After having playing with her for 30 minutes, I gave up and uninstalled Norton. I have disabled the firewall, I have reset the default settings. Here is the message I get when I run a diagnostic. A crazy thing is that I can connect to internet when I connected to this same computer as a guess.

    Please help me!

    Windows cannot connect to the Internet using HTTP, HTTPS or FTP.
    This is probably caused by the settings of firewall on this computer.

    Check the settings of firewall for the HTTP port (80), HTTPS port (443) and FTP port (21).

    Hi rhonda9937,

    1. what browser you are using to connect to the internet?

    It is not recommended to keep Windows Firewall disabled on the computer.

    This would happen if the ports are not open in the Windows Firewall.

    I suggest that you open ports in Windows Firewall and check if it works.

    How to manually open ports in Internet Connection Firewall in Windows XP

    http://support.Microsoft.com/kb/308127

    Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

    http://support.Microsoft.com/kb/875357

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

    After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

    but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

    How to fix this?

    Glad to hear it.

    If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.
  • I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using ethernet

    I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using a lan cable plug on my netbook (win 7 starter) that has wireless it gives me limited connectivity and no internet

    Hi evilcrebyc,

    Consult the following Microsoft articles and make sure that all settings are correct.

    How to configure Internet connection sharing in Windows XP

    http://support.Microsoft.com/kb/306126

    Troubleshooting Internet connection sharing in Windows XP

    http://support.Microsoft.com/kb/308006

  • hp5610: unable to print from the internet regardless of search engine

    I'm unable to print from the internet regardless of internet search engine. I ran the impression scanning hp doctor who shows no match port, I don't know what that means. What I've tried is; power off printer, internet modem and usb ports restarted, changed, cable and ethernet cable. This problem has been resolved before by switching engines, this has no effect now. Help

    Mikev

    Welcome to the community of HP @mikiev,

    I read your current and previous posts about how you can't print from the internet, and I wanted to answer you with my suggestions. I understand that you have tried to use different however search engines, try to return to my colleague's response @RnRMusicMan on the link below and try to use another web browser altogether. Again, if you use Google Chrome, try Firefox or Internet Explorer.

    If Chrome and Firefox will not print, try printing from NotePad, which is a program that is preinstalled on your system to see if the draws work from there.

    You can also try uninstalling and reinstalling Google Chrome or Firefox, whatever one you use often, to see if that helps the printing problem.

    Let me know what is happening and we can go from there!

    Good luck

  • My laptop connects is more to the internet, either hard wired or wireless. When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before.

    My laptop connects is more to the internet, either hard wired or wireless.  When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before.  My other computer has service very well (or I wouldn't send this message) I checked everything, what to do?

    original title: internet connection.

    Hi vonhatten,

    1. Did you the latest changes on the computer?
    2. You receive an error message when you try to connect to the internet?
    3. You have security software installed on the computer?

    Refer to the article below and try the steps mentioned, check if it helps.

    In Windows network connection issues

    http://support.Microsoft.com/kb/313242

  • connection to the internet using time capsule

    I have problems connecting to the internet using time capsule. It detects my wireless network but will not connect to internet. I run ipconfig/all and it comes up with media disconnected. If I put any security on my wireless network, it finds the network and go on the internet with no problems.

    Thanks for the help in advance

    Hello Pudgex76,

    I suggest looking on the forums of Apple for more information if necessary:

Maybe you are looking for