Re: Satellite P500 - 1C7 do not wake up after adding memory

Similar Questions

• Satellite P500 (PSPE8U) - can not find the drivers for it

  Hello

  I've been and down these forums without success. I watched a lot of forums for the drivers for my P500. I've been through the pages of support sites toshiba of Europe, Uk, Australia and Japan... no chance either. I tried to contact the ebay seller I bought, apparently it is now out of business. It goes without saying that the laptop came without any driver disk. Unfortunately, one of the drives died on me and had no time to do a recovery with all the drivers disk. So now I'm really stuck. Here are the details of the laptop should anyone have brain waves for me-

  P500 - PSPE8U
  Windows Vista 64-bit
  ATI HD 4650

  At the time the largest bad head are the video drivers and my battery life is around 30 mins without the toshiba software. The stock of the resolution is a disaster without the correct driver. I tried the ATI46 drivers * from their site, but the application tells me that my hardware is not supported.

  Any help would be appreciated.

  Thank you
  Chris

  Hi Chris,

  Satellite P500 with model PSPE8U number belongs to the US models and therefore all the drivers and tools that you can find on the Toshiba U.S. page:
  http://www.CSD.Toshiba.com

  Just check the underside of your laptop again for the exact model as P500-S1234 number, then you can find the right drivers for your model. :)

• Satellite P500-12F will not load the drivers of track pad!

  Hi, I just got a DVD driver for this lappy and is a self intall of all drivers that are missing or that need to update, when ran I was told of the Skate track had disappeared, and started to load, but it will not I tried a load of strength in vain Hat too, the track pad did not work since getting this second hand could the block be disconnected from the motherboard?
  This would make the driver not loading please?

  Any help would be really appreciated.
  Thank you, Wayne...

  Hello Wayne

  In front of me, I have Satellite P500 and I use it almost 10 months now without a single update. What I'm updating are important updates from Microsoft. More than that and so far I didn't notice a single hardware or software problem.
  After reading your ad m a little confused.

  As far as I know Toshiba doesn't offer any DVD for that laptop, not any kind of pilot DVD so please be so kind and tell me which DVD driver is and who has created and offered this DVD.

  original is Win7 64 bit OS (original image of recovery Toshiba) preinstalled on this P500?

• Satellite P500-1DX will not accept password

  Satellite P500-1DX - Windows 7.
  Not connected this morning no problem, return to work will not accept password.
  Had not implemented the password reset disk, but have one created from my old laptop which is vista OS.

  However, when I enter the P500 it runs the wizard and an error occurs.
  The laptop has perfectly to update Norton 360 on it is probably not a virus.

  All ideas

  Hello

  What password do you mean exactly?
  BIOS or Windows user password?

  If you're talking about BIOS password then I have some bad news for you; You cannot reset a unknown BIOS password. Only a Toshiba ASP technician may remove unknown BIOS password.
  But if you talk to windows user password, then you could reset/clear the password by the new installation of the operating system for this you can use a HARD drive recovery option.

  PS: I found this article on resetting a password account user in Vista or Windows 7. I did not try it, but some people on the net reported that the account password could be changed successfully
  http://www.Vistax64.com/tutorials/102005-reset-user-account-password.html

• On the Satellite P500 microphone does not work well

  I spent $2,000 to buy this Satellite P500 a month ago and soon found that the microphone does not work well. I used the web camera application to record a video to test, the volume level is very low that you barely hear it and it cracks.

  I called the support center, waited for half an hour and finally had someone to talk to me, I followed his instructions adjusted the level of the microphone to 100 and the boost to 0.
  The cracking sound disappeared, but the level of volume is still too low to hear. What can I do?
  Call again and wait half an hour? His Friday 17:00, they will be upset and I'm already mad!

  Hello

  Have you tried to test mic with Skype or a similar application. Friend of mine has Satellite P500-127 and he use it for Skype communication.
  I can hear it fine and everything works fine.

  Do you still have the factory settings (original operating system preinstalled)?

• Satellite A200-27U not wakes up after hibernation when you open the lid

  I just bought a new Satellite A200 27U which goes a lot so far.
  However, I have configured in hibernation mode when I close the lid.

  I can't resume automatically hibernate when I open the lid.
  I have to press the power button.
  Is this normal, should resume automatically?

  If yes how to do it do?

  It is the same with my Satellite P200 and I think it's normal. It is the same on my second laptop preinstalled WXP.
  Putting into service is not automatically and after you open the laptop I have to press power button / stop too.
  But it is not so problematic. What do you think?

  You use Windows XP Home or Vista edition?

• Satellite P500-153 - computer freezes during absence after - min

  Hello

  3 months now, I bought a new Satellite P500-153. My problem is that the computer very often been completely freeze after 30 to 60 minutes when I'm not working on it. The only possibility is to press the power button and restart. Last Sunday, it freezes also for the first time, when I'm working on the computer.
  All recommended updates are performed.

  Anyone has the same problem?
  Do - does anyone know why or what I can do?

  I hope someone can help me.

  Thanks in advance!

  Frank

  Hey mate,

  What additional software you have installed?
  Have you updated to the drivers and what OS you have installed?

  In this case, it's really hard to say what is the cause, so you should test with factory settings and see what happens.

• Class not found exception after adding a new image in the folder resources.

  The app works perfectly well on the Simulator and the device. After adding a new set of images, he began to show in every race, on the Simulator and the device, a class not found exception.

  When you try to delete some images to find the cause, I get different classes not found when executing. Compilation and packaging the application generate warning or error. They even get signed. Some of the classes are not exception I get:

  Java.lang.StringBuilder

  NET. RIM. Device.API.UI.UIApplication

  I'm guessing this has something to do with the size of the total image, since the size of each range image from 100 KB to 300 KB, and we talk about only 25 or 30 images in total. Adding image outside of the 'res' folder does not generate the error, but the image is not added to the final files.

  In addition, this application is not large, but when compiling and packaging of the app, it generates and signs 125 cod files. Is this normal?

  I use Eclipse 3.6 (Helios) and BB SDK 5.0.0.25 won win 7

  Any help will be appreciated. Thank you.

  Have you seen this?

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/the-maximum-size-of-a-BlackBerry-smart...

  I would recommend that you download these kinds of resources and put them on the SD card if you take a storage capacity that users will want to keep available for email and others.

• Satellite U405D-S2850: may not wake from sleep correctly

  Hello

  My U405D sleep and can only wake place properly if he does not sleep for too long. Too long as in more than 15 minutes or more. If the laptop has overslept, the laptop wakes up, goes to the awake routine (snoring), then stops with a blank screen. All the lights on the laptop are, except for the light that is above the touch pad. In the State of the blank screen, nothing does, and I pressed the power button to restart the laptop. I have recently updated the BIOS to version 1.5 of the 1.3 version that came with the laptop in the hope that the problem is resolved with the update of the BIOS, but the problem remains. I know not if the awakening is successful if the light above the touch pad is enabled. An idea or a similar experience? The laptop is running Windows Vista Home Premium SP 1.

  Thank you.

  In my opinion, there is absolutely no hardware problem. If I well remember these issues were present in the past and above all he has difficulty with the BIOS or patch updates.

  If you have a portable US model I recommend you to visit http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp. You will find updates useful support. Please also check ask Iris. Maybe you can find some technical document with a possible solution for this.

• Satellite P500 - 14L - can not see the mouse when you play the game

  I use P500 - 14L, the graphics card is NVIDIA GeForce GT 330 M with CUDA technology. Unfortunately, when I play C & C 4 game, I do not yet see my mouse cursor.

  Did anyone had this problem before? How can I sort?

  Hi vincentcky,

  This only happens on C & C4 game or with other games too?

  You should look for a patch for this game. You can find it on the site of the factory.
  Additionally, make sure that the latest version of DirectX is installed.

  Last but not least, it would be interesting to know what operating system you have.

• Satellite P500-15E does not work anymore

  Hello, I have a big problem here.

  My laptop just crashed, and it no longer works. I think it could be the motherboard that has overheated, because I did all the tests that I could. I know a computer to function without graphics card, ram etc... (at least, the status of the Green led should be there).

  So, there is no green light when I put the provision on, and the power button of course doesn't do a thing.

  Toshiba may change my motherboard if I send the phone to them? Or just because of this, I have to throw my laptop?... Which is really bad because I'm sure that everything work fine! (Screen, ram, HARD drive, etc...).

  I'm from France, sorry for my grammar.

  Thanks a lot to read me :)

  Hi veterinarians

  I m big fan of P500 and I have almost 5 years now. It works perfectly and it is the best laptop I have eveh had so I understand you very well. I guess you like it too and want to have a good once again.

  What about your problem. There are certainly mainboard related issue. I cannot say with certainty, but is perhaps responsible for electronic working non-portable power. Theoretically the service might be able to fix it, but I'm afraid it could be quite expensive Mr. call the nearest service provider and ask for help. They offer all the info you need.

  Two months ago, that I bought a used one for my trouble. He was in very good condition and I paid 400 Euros for it. Check eBay France and maybe you'll find a good model.

  Unfortunately, Toshiba does not offer such laptop 18.4 more but you can check some new models of P. If the repair will be expensive for you he sold it on eBay and buy a new one.

• Satellite L40 PSL40E not wakes up after hibernation when the lid is closed

  Hello

  I had a serious problem with my L40 PSL40E:

  If I put at the bottom of the screen I could not restart and had to reinstall Vista! After some updates it was fine for a few months now I've lost my entire hard drive AGAIN!

  Friends told me that this has something to do with the hybernation mode or bios (?) and to download some driver bios?

  But does not work the link to 02/11/2008

  The link to the BIOS should work... I visited the European driver of Toshiba page and the links work without a doubt. Maybe you should try it again.

  Generally, it is not a bad idea to update the BIOS and the operating system to the last State.
  Vista still has many bugs and you should check the from time to time if a patches and hofixes have been released.

  In the next time that the SP1 should be published, and you need to install the final version (if available).

• Satellite L850-A635 does not wake from sleep mode

  purchase date: June 6, 2012

  When I put it in mode 'sleep', he goes to sleep, but when I start, it awakens me unless I have remove the battery, put in place and turn it back on.

  Please advise me how I can solve this problem

  Hello

  What happens if you press the power button / stop 4 sec long?

  Please run a HARD drive recovery procedure: (F8, fix my computer-> Toshiba HDD recovery)
  Don't install any software, but test the "sleep mode" immediately after that drive HARD recovery is completed.

• Satellite M30-107 does not start successfully after using recovery disk

  Hello

  I recently got my hands on a toshiba Satellite M30-107 laptop second hand and decided to freshen it.
  I used the toshiba recovery disk, but after that the laptop is no longer support windows.

  When turned on it shows booting Toshiba disc for about a second then goes to a screen blank and freezes.
  When turned on, once again, a screen will appear an error by stopping and offer the opportunity to start in SafeMode etc but choose one of the options causes the machine to freeze.

  Any help or advice would be much appreciated.

  Thank you
  JT

  Hello

  Sounds a little like the laptop does not start because of the problem of Windows software
  You did not recover the M30 with the original Toshiba that was provided with this device M30 recovery CD?

  I may be wrong, but to me it looks like a recovery CD incorrect has been used and an image with drivers not compatible m has been installed

  You can try to install the OS of Microsoft Win XP original CD and could check if it would be possible to get the notebook ruin using own BONE.

  In this case we (you and me ;)) might know if this problem could be related to hardware or software.

  Good bye

• USB does not wake up after Tecra R840 goes to sleep

  Hello

  I have a Toshiba Tecra R840 on windows 7 sp1. I use a USB mouse, but whenever I put my laptop to sleep I have to go out and re put the dongle insert it again.

  I've changed the following power options:
  Under devices, USB, USB Root Hub power management "allow the computer to tun turn off this device to save power" is not checked

  It goes the same for generic Hub
  Under control panel, power options, USB, USB selective parameter settings is disabled.

  Does anyone have any suggestions?
  Thank you
  Tony

  Have hmmm you tried to remove/delete the USB hubs and controllers from Device Manager and install it again?
  Usually after restart again the system should automatically find the drivers and needs to be reinstalled all USB controllers once more