Satellite U200 - 1920x1080@64Hz on the external LCD screen resolution problem

Similar Questions

• Re: Satellite R630-13F: taken Possible supported the resolution of the external LCD screen

  Hello

  I intend to buy a LCD for my editing work.
  My laptop is R630-13F.

  I was wondering if I get the LCD high resolution (2560 x 1440), my phone would support such screen? Thank you very much.

  Tim

  Hello

  The external screen resolution depends on the graphics card and the external monitor.
  As far as I know the Intel graphics chip that is used in this laptop is capable of managing the max 2048 x 1536 at 32-bit resolution

  2560 x 1440 appears to be too high

• Satellite Pro U300: Low resolution on external LCD screen and a station

  I've got Satellite Pro U300 and LCD HP1907v and PA3542E-2PRP - docking station.

  When I connect external LCD for laptop - resolution is OK (1440 x 900). But when I connect the external LCD display in a docking station - the resolution is lower(), I can't change it, and I don't have some display options under Fn + F5 (that I had when I passed this lcd directly to the laptop).

  Help me find a solution, please!

  Yes. Latest Dynadock software must be installed.
  I checked the hardware specifications of the dynadock with DVI-d port and DVI supports a maximum external resolution UXGA (1,600 x 1,200) 24-bit.

• Satellite Pro U300 - the broken LCD screen

  Hi all

  My first post please bare with me.

  I have a Satellite Pro U300, who has a broken LCD screen.
  I have a replacement screen, but not sure how to go abouts it change places.

  Someone at - it a service manual for this model or the tricks and tips on how to disassemble the unit to swap the LCD broke with a new one?

  Any help would be greatly appreciated.

  The service manual can be downloaded. It s not for the public and it s only for Toshiba and approved providers available I think.
  On the Toshiba site, you can download the user manual, but I doubt it would be useful for you.

  I think the best way would be if you go to an authorized service provider. The exchange of the LCD is a little tricky and you should have experience with this.
  On the Toshiba site, you can search for an ASP. I m sure that the technicians will help you. ;)

• Satellite C70 - A - 16 L - screen resolution problem

  Hello

  I recently had a screen resolution problem with my laptop (C70 - A - 16 L).
  The max screen resolution which is imparted to me is 1366 x 768, whereas before I think he used 1600 x 900.

  I tried the latest drivers, Bios, etc. and have also restored the operating system to a previous backup, as well as a new installation.
  I also tried to roll back to Windows 7 (with proper drivers). They all offer the same problem.

  This new maximum resolution display correctly - as if the LCD does not deal with the timings of 1366 x 768.
  I believe that the Panel is OK and the problem he reports the EDID information properly - to force windows to use the new resolution.

  Is there a download monitor.inf file that can be used to bypass the EDID reported by the Panel?

  Kind regards

  Antwist.

  If the right to display drver is usually installed everything should be OK.
  Have you installed Intel driver Toshiba download page 9.17.10.3062 version?

• Satellite M100: Cannot set the resolution 1368 x 768 on external LCD screen

  Satellite M100-179
  Graphics - ATI x 1400 card.
  Cannot set the resolution 1368 x 768 on connected usung Sub - D LCD TV Samsung 32R72
  There is no resolution 1368 x 768 in the available resolution list.

  The graphics card hardware support different screen resolutions, but if the driver doesn't contain this resolution of the screen so that you cannot choose it.
  I think so you re not able to choose this special resolution on the external display.

  In my opinion it has nothing to do with the graphics card or with the screen, but only with the graphics driver.

• Re: Satellite A200 - 1 GB - strange ripples on the external LCD

  H,

  When I try to connect my laptop to my Samsung 32 "LCD with VGA, I have strange ripples on the screen.
  I tried to change any settings in my computer and my TV and it's still there.

  How can I fix?
  It is almost impossible to look like that.

  Thank you.

  Have you tested the laptop with other external monitors?
  You should do this to make sure that it is not a matter of LCD

  I also recommend checking if those ripples are visible using different screen resolutions!

  Last but not least an update of the graphics card driver would also be useful.

• Satellite M30X: Can't watch movies on external LCD screen via a cable VGA - black screen?

  Hello.

  I have toshiba laptop M30X satellite and I difficutlties about the link between the laptop and lcd tv 32 S 3000.

  1. first of all, I tried with the s-Video cable: I see what is on the screen of the computer laptop on the TV screen, but much worse than plugging in the VGA cable, in terms of sharpness and resolution. I did this by setting the LCD display in the menu windows.

  2. when I use the VGA cable, I don't see it on the TV screen, what is on the screen of the laptop.
  I might need to upgrade the drivers for the ATI radeon 9600/9700 series factory installed on the laptop?

  BUT the biggest problem arises when I want to see on lcd display media player file formats: mpeg, avi, etc.

  What's happening: on the screen of the laptop, I have the image of the film, and on the LCD TV screen I have BLACK SCREEN (even the media player toolbars are still visible)
  If anyone has an ideea, I appreciate it.

  Thank you for your time.

  > 2. When I use the VGA cable, I don't see it on the TV screen, what is on the screen of the laptop.
  > I might need to upgrade the drivers for the ATI radeon 9600/9700 series factory installed on the laptop?
  This has nothing to do with the display driver, but with the connection.
  The VGA port should be used to connect the external TFT and not the TV monitor
  But have you used the option of FN + F5 to switch between screens devices?

  > On the screen of the laptop, I have the image of the film, and on the LCD TV screen I have BLACK SCREEN (even the media player toolbars are still visible)
  To my knowledge, you must first switch the display on the external monitor and then you should start the film actor.

• Satellite U200 - where to find the Bluetooth and Vista driver in English

  I just bought a laptop Satellite U200 - in Russia. Of course, it came with Russian Windows. The computer has a disk, a "reanimator" with pilots so that we could not use English Windows and the drive.

  My it guy managed to get the drivers of Toshiba and then also successfully installed Windown Vista in English for me. But now I can't find Bluetooth anywhere - it is not yet listed in devices. Yes, I have Bluetooth. In addition, there is no software to activate the secuity of fingerprint system.

  Is there anyway that I can get the drive reanimator in ENGLISH? It should come with my computer model to the United Kingdom, so it should be there? Can I order it? Or is it in my computer, I just 'find it '?

  Hello

  Follow this:
  http://EU.computers.Toshiba-Europe.com-> support downloads & -> support-> driver downloads home page.

  There you can select-> Satellite-> Satellite U series Notebook-> U200-> Windows Vista.

  You will get all drivers in different languages. The English version is also available ;)

• Satellite A350D-10Y - failure of the external graphics card?

  Hello guys,.

  I have a toshiba Satellite A350D-10Y and I get some sounds of the sound system of the laptop, but a kind of Mermaid on the mother, accompanied by lights driver dvd, map emitte acoustics is two short beeps. I'm getting these two short beeps loops within a period of 5 seconds +-.

  I downloaded a video for you, to listen to the sound emitted by the MB, in the end you can hear better because you get less noise from the cpu fan:

  Feature of the motherboard: ATI external graphics card

  Things I've done:
  -Remove the battery and try to put on without it.
  -Switch of RAM on the slot a RAM
  -Clean cpu fan one its exhaust
  -Change is the motherboard on a new

  Now, the problem was taken up to, or is the processor or the external graphics card.

  I think that the problem of the graphics card, because if these was a problem of the processor, I'd get the audio system of the laptop beeps and not a buzzer next to the MB.

  Can anyone here help me?

  From my point of few it of not possible to say what s wrong with the laptop without running certain diagnostic tests and check the part.

  The often shorter and emits a beep when turning procedure appears due to the POST (power on self-test) failure.

  This essential POST routine determines the available memory real quantity and checks for the presence of required hardware components.
  In case one of the hardware components would be defective, the power on self test could not be transmitted correctly and the laptop would begin to create some beeps.

  If you are sure that the modules of memory so that the card mother isn't affected, then one of the pieces referred to as CPU / GPU can be the troublemaker.

• What is it's ok to keep Satellite U500 closed while using the external monitor?

  Hello

  I have a Satellite U500.
  At home, I use a monitor and a keyboard. So I closed the laptop while working at home.

  I can do this, or would it damage the display or otherwise hinder ventilation properly somehow laptop?

  Thank you very much for your answers.
  Thierry

  Hi mate

  Of course, you can close the lid when the laptop is connected to the external display.
  I have a Satellite phone as well and it s connected to the external monitor.
  I also have a USB keyboard.

  I use the external keyboard instead of the internal keyboard for laptop and the cover is too firm

  Don t worried if he of ok!

• My Satellite phone does not recognize the external hard drive

  I recently bought a Toshiba Satellite with Windows 7 Home Premium 32 bit. I connected an external hard drive (brand is seagate) that still works on my previous laptop (Dell), but the system does not overlay the external hard drive. It does not recognize there is an 'external Hard Drive FreeAgent' but when the AutoPlay window appears & I choose "Open folder to view files" it gives me the following message is displayed:

  "G / is not accessible.
  Access is denied. "

  I called the manufacturer of the external hard drive (Seagate) & they told me that it is a windows problem.

  can someone help me? ... Thank you

  Can you please tell us which model of laptop you have exactly?
  Do you use an original preinstalled operating system?
  Are you using USB ports?
  Have you noticed the same problem using all available ports?

• Equium A100-147 - Native resolution on the external LCD display does not work

  Hello

  My Equium A100-147 has 1 VGA and 1 S-Video output, so I use the VGA output on an external LCD monitor with a native resolution of 1680x1050@60hz, but integrated graphics Intel 945 card doesn t give me the correct resolution to choose for this monitor, the closest is 1600 x 1200 and some weird widescreen resolutions other that make my monitor see the scaling an ugly picture.

  So I tested another external monitor with a native resolution of 1920 x 1200 resolution closest gave me Intel drivers is 1920 x 1080, even the installation of two drivers of monitors, remove and reinstall the driver and same formatting the machine and reinstall everything from scratch gave no different results.

  I have another laptop MSI Wind with the same graphic card built in and the same version of the pilot, and the laptop detects both the monitor and the good resolutions for them, this isn't a problem of Monitor driver.

  Seems to me that is a problem with the S-video output, which makes this mess, but there is no way to disable it in the BIOS or any other place in Device Manager I still seem.

  Can someone give me some advice for what can do?
  Thank you!

  Hello

  You cannot choose the preferred resolution because the graphics chip does not support this external resolution or the installed graphics driver is not contained in this resolution. The two cases are possible.

  If you want to know if your graphic chip supports this resolution and then take a look at the user manual and check it.

  If the chip of the graphics card would support this resolution and you will not be able to choose, then that would mean that the graphics driver does not support this resolution.

  But first he must find out what external resolutions are supported by the GPU.

• Satellite M500 - closing LID off the external display

  I just bought a new M500 today. I use a TV 46 '' as external display. When I close the lid of the external screen turns off and the laptop into hibernation.
  How can I stop this I use the external screen 95% of the time?

  Thanks in advance.

  Hello

  It's just an option, you have to change the Windows power management. Go to power options, and then select the power profile you use. Change the map and scroll until the power buttons and lid-online lid close action. Change this option to do nothing. With apply then OK you save this settings.

  Now you can try it again. I must say for me that it worked because I also work with the external monitor. :)

  Welcome them

• Satellite U400 (PSU44A 00H00C) - supported the external display resolutions?

  Hello

  Where can I find a list of external resolutions supported by my laptop? (VGA and HDMI) I would like that by an external monitor if you need to check that my laptop will be able to use the native resolution before you buy.

  Thank you very much
  Selba

  Hello

  Did you check your user manual? Normally you can find a list of the supported external screen resolutions.

  Check this box!