L50-A-19N satellite will not start in the BIOS
Hello
I have a problem with my laptop.
I have installed 8.1 and fedora 20 windows.
I was in fedora, when I decided to restart Windows.
Instead of grub, I saw message with the error and my notebook has stopped booting.
I pressed the power button / stop, he died but when Im trying to start it again, I see the logo of Toshiba Leading Innovation and that's it.
It will not start any further.
I decided to get my system, but when I press F2 or F12, nothing happens.
I can't get into the BIOS!
Please, help me to solve it.
Somehow, this seems really strange
I m wondering why you are unable to access the BIOS
What you can try to do is, remove the laptop HARD drive and switch on and press F2.
From my point of view of the rare even if the isn't HARD drive connected, you should be able to access the BIOS.
But for Pierre, I'm not very well your laptop problem is related to the faulty / corrupt Boot partition m
However, your comments would be greatly appreciated
Tags: Toshiba
Similar Questions
-
L50 - B satellite will not start when the battery is completely discharged
Hello
My Toshiba L50 - B won't start when the battery is fully drained but connected to the power outlet.
I try to work most of the time on the battery to keep the battery in good shape, but when I forgot to turn off the battery drains and the system will not start when I plug in the adapter.The battery charge indicator is orange light as it should. Only when the battery is fully charged to 100%, it will run at startup and function normally after that. I tried to turn on the laptop several times during the charge cycle, but only when the charge indicator changes from yellow to white it starts. Tested for 2 bodies.
My old Toshiba always immediately turned on when I plugged the adapter even when the battery has been completely drained. Am I missing a setting somewhere?
Thanks for responding... I hope well :-)
Toshiba L50 - B
Windows 8.1
Any standard/original setting since I only acquired this laptop a month ago.The laptop should light up if the power adapter is plugged in and power the laptop corectly any if the battery is empty or during charge.
Please check the version of the BIOS that is available on your mobile phone and compare with the BIOS available on the page of the Toshiba UE driver
Maybe you need to update the BIOS, but to be honest, the history seems really odd to me and I m afraid that there could be some power supply electronic problemSo in the worst case, the laptop must be checked by authorized service provider.
-
Re: My L50-A-1 Satellite will not start
Hello world
I have a C50-A-1 Satellite and it won't start. I used my computer at work this morning on the farm and I realized that I forgot my food at home. My laptop just Runic off battery and off of himself.
I came home, put the power supply and no lights are on my laptop won't start. I can't remove the battery on this laptop, so I can't check if it works only with the power supply...
Any suggestion?
Thank you very muchHello
I recommend to use the reset (small hole) button located at the bottom of the unit.
Usually, in the case of PC freezes, do not start or has a power failure, you can stop it by pressing the power button for 10 seconds (force shutdown).Here's the full description:
[The stop switch of strength (hole) for models with one main battery fixed | http://aps2.toshiba-tro.de/kb0/TSB3C03JR0000R01.htm]Feedback would be greatly appreciated.
-
Satellite Pro L300 will not start after the Bios Update
Help please.
I simply formatted laptop Satellite Pro L300.
I used all the drivers updated Toshiba and everything is fine.I then updated the bios with the latest version.
After this laptop computer is unbootable but continues to scroll through the start menu and any which option to choose it just keeps doing the same.The ides welcome
Hey Buddy,
What start menu, you mean?
I put t understand how it is possible until you wrote that your laptop does not start?
-
A33 satellite will not start on the hard drive even after the installation of the new system
Hello, I need help, my A33 does not start on a hard drive. It is to see the drive hard in the bios and even by operating the drive when you go to install. But as soon as it will boot to the hard drive, it is just a black screen. It is very strange that you can see the hard drive in the bios and even with a diagnostics disk. I can see, scan it and check it by starting with a diagnostic disk, but when I start the computer, it doesn't do anything.
Help please!
Stand by. Your ad is so confused. When you read can you understand what you wrote?
BIOS recognizes the HARD drive correctly, no?
When you use bootable disk for the installation of the OS is properly recognized HDD?
You can install OS using the original recovery disc or by using the Microsoft installation disc? -
Re: Satellite L300 will not start in the BIOS
Hello
I have a problem with my laptop.
I have windows Vista installed.I try to boot a Linux Live-CD, but after I pressed the power button, I see the logo Toshiba Leading Innovation.
When I press F2 or F12, nothing happens the computer laptop stops booting, even the HDD light flashes).
I can't get into the BIOS!If I do not press a button any after power on, then Windows Vista starts Ok.
Two months after F12 I could choose the Boot by USB - entrance.Please, help me to solve it.
When you see the Toshiba logo on the screen you see in the background statement: Press F2...?
This happens for the first time?
Might have turned quick-start option?
Check this please. Open Toshiba assist > optimize > HWsetup > boot priority > make sure bot speed is set to normal. -
A series of satellite does not start after the BIOS update
After update bios with the downloaded utility my laptop does not start.
Do you have this case covered by the warranty?I'm not sure if this would be covered by the warranty. You must contact the ASP in your country for details, but I assume that it s not covered.
PS: Did you try this work around:
-remove the battery, disconnect the adapter
-wait ~ 40 min
-connect the two devices again and try to turn on the laptop -
650 satellite will not start, tried the usual suggestions without success
Satellite C650 willing daughter of a screen empty other than a flashing cursor in the top left when the laptop is turned on. I have read the various threads (not on this site) and tried to turn on/off and pressing F8 (also tried F9 and 0 zero) to try to do a system recovery but nothing else happen to beep for a few seconds and then back to the screen empty.
She has not the recovery disks. Can anyone help.
The laptop is under warranty until December 5, but I don't know if it would be covered for this problem?
A few days ago, I had the same problem. I tried everything but to no avail. I m not 100% sure, but I think it was a virus or something similar something killed hat.
In my case, only the clean OS install solved the problem. I ve used created recovery DVD and now I use factory again.
I recommend you order on https://backupmedia.toshiba.eu/landing.aspx's original toshiba recovery disc
Install the OS using this disk and everything will be OK again. -
Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
Tried running firefox.exe Pei but error message:XML parsing error: the undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line 18, column 1:
"< dialog < =" "^ =" "p =" "> < / dialogue >Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.
Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)
-
Laptop will not start without the battery attached
Hello
I have a Hp pavilion dv6700 series (dv6840el) and just, it will not start without the battery attached.
If I plug in the AC adapter, I get some computer activity (fan, noise of the dvd player and HD drive spins) for about 5 seconds, then shuts down.
Once I plug the battery (which is dying, who need a replacement), the laptop starts fine.
So my question is: what is a motherboard or a problem with the AC adapter?
The AC adapter looks ok, however. But if I am considering buying a spare battery, I assure you that I have a new adapter as well.
Thanks in advance.
Hello
Visit this link
Good Luk
-
Internet, not able to browse computers on the network
The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)I'm puzzled.Hello
I suggest you to send your request in the below link.
http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads
-
My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.
- Did you the latest changes on the computer?
- When was the last time it was working fine?
- You receive an error message?
Method 1
See the articles below and check if it helps.
Computer stops responding with a black screen when you start Windows XP
http://support.Microsoft.com/kb/314503
After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen
http://support.Microsoft.com/kb/318027
Method 2
I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
How to start your computer by using last good known Windows XP Configuration
http://support.Microsoft.com/kb/307852
How to fix a computer that does not start
http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start
Method 3
If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.
It is possible that some third-party programs installed on the computer is causing the problem.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
-
Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had the same problem and I responded went to try the solution but then started to get the message that the file: \windows\system32\config\system is missing or corupted. Have tried to do where I could start up in safe mode and cannot. Tried to boot from the installation CD, but when I try to make the system recovery and choose the system to recover nothing happens. This isn't regarding the password. I have a Dimension 4500 XP sp3
Hi BrianJ641,
Follow the steps in the article.
http://support.Microsoft.com/kb/307545
Note: When you are prompted to type the administrator password, you can type if you set the password. If the administrator password is blank, just press ENTER.
-
Vista - computer will not start without the disc
loaded vista on my computer - now computer will not start without the disc
Went into my bios as suggested to check the boot order - and, Yes, I got HDD1 as first boot then CD - but then I remembered something I had seen earlier on my computer - it was on the list the HD which had my system like HDD0 files - so, I checked and there it was - listed option HDD0 so I changed HDD1 of HDD0 and was able to boot my computer without the disk system. Hope this helps someone else with the same prob.
-
Just installed 14 elements, but the editor will not start. The notice appearing - Italian - is: Impossibile find it punto di ingresso della procedure nella libreria di special dinamico C:\WINDOWS\SYSTEM32\MSVCP110.dll _crtCreateSymbolicLinkW
Hello
Update your Redistributable Package VS.
https://www.Microsoft.com/en-AU/Download/details.aspx?ID=30679
Maybe you are looking for
-
If I have a MacBook Pro with El Capitan can I make the disk hard drive with an older operating system and run all my old programs
-
I can't add bookmarks or move the bookmarks from old computer on the same version of Firefox
I tried to move the bookmarks file, but get the message "cannot process file. Also I can't save all bookmarks
-
For example this page I am now by train is simply the text with blue text, not graphics on a black and white empty bar at the top of the page under the heading and the page to ask a Question
-
high sound height that emitting the end of 2013 (about 6 months old) iMac
Recently, I was informed my iMac 27 "end 2013 (purchased 6 months ago) have been emitting a high frequency intermittent sound. It seems to come from the top left corner of the screen, or maybe the left side of the screen. How I can find a solution to
-
HP workstation xw6200 model number: DU937AV - a Front Panel USB HUB added
Good afternoon I'm back with a double question this time. (a) my XW6200 in its current configuration offers only two frontal USB 2 ports, the other 6 being located on the rear panel. Would it not possible to add a front panel USB Hub? (b) what