Re: Several problems on all new Satellite L750-EZ1 (Win7 64 bit)

Similar Questions

• Webcam does not work on all new Satellite L750 - 17 p

  Hello

  I bought a new Satellite L750 - 17 p and the webcam does not work. I tried to reinstall the drivers of webcam on the Toshiba site, someone at - it ideas? Similar problems?

  /AK

  Webcam doesn t work
  How to understand this?
  This statement is too general.

  Can you offer more details please?

• All new Satellite L750-22Z does not load

  I bought my new L750 Satellite 22z Friday, since that time I installed Microsoft office and moy. When I turned it off yesterday he said installation of updates.

  When I turned it on today it says that there are 46000 updates to do and showed it running updates for a few minutes, he left for the toshiba leading innovation screen where it is blocked for 4 hours.

  I don't want to force close to the low snack snack that's still making updates, but I don't know what to do and if it is somehow broken. Anyone know what I need to do?

  I agree with kancaras. Install the recovery image again following the instructions on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  After doing this you will have own OS preinstalled again and you can start using the laptop with factory again.

  Be careful with the installation of updates. I assume that you are writing about the right Microsoft updates?
  Disable automatic update and before you install check updates are listed.
  Install important updates only.

• WIFI problem with all new Satellite C660

  Hello

  I just bought a new Toshiba Satellite C660-108, I found it won t pick up and hold the wireless, I returned to the store and they replaced, but same thing happened.

  It works when I plug on-line.

  Can you please explain exactly what you mean with he won t pick up and hold the wireless?

  Can you use WLAN or not?
  Have you tested with other wireless LANs?
  Have you tried to reboot your router, check the settings and try again?

• Problem of speaker with Satellite L750

  Hello!

  I had some problems with my internal speakers on my laptop Toshiba Satellite L750. I just got the laptop a few months ago, and so far, everything seems ok... except for the speakers.

  So if I leave the laptop and put it on "sleep" or "hibernate", when I come back to turn on the laptop, the sound from the speakers gets all blurry and begins to lag... I end up having to restart the laptop just to get back to normal speakers.

  No matter how long I leave the portable sleepers for - it might be 6 hours or 1/2 hour - almost everytime, I end up having to restart the laptop to solve the problem.

  It is not that I have a big problem with restart - I want to say, if this is the way to solve this problem, it's quite well! It's just boring after awhile and I don't want that there is some underlying problem that could lead to other parts of the laptop is messed up, I'm just ignorant.

  I'm certainly not a computer expert, but what I checked in the control panel and speakers news suggests that the speakers are working properly.

  I do not understand why this is happening almost everytime. In with regard to the sound being blurred and trolling, it's either the sound of the songs I listen to WMP, or whatever it is I watch online, or sometimes even both.

  Anyone has ideas or suggestions on what could be the problem and I could do?
  Any help would be appreciated.

  ? Thank you!!

  Over the last ten years, I used several laptops from Toshiba but I ve never noticed anything like that and it shouldn't happen. After the awakening of speakers should work normally.

  Are you using the original OS that you got with your laptop?
  Have you noticed this strange behavior from the first day, or later?

  Permanent reboot is not solution and maybe you should contact Toshiba service and ask for help. They should check this. What do you think of this?

• Question sleeping on all new Satellite Pro U500-1EX

  Hi guys,.

  I have a new Satellite Pro U500-1EX with Windows 7 64 bit.

  The laptop is having some problems with its function of sleep. I wonder if others have had the same problem - and if anyone knows anything that can be done.

  OK, there are two questions;
  1. when the laptop enters sleep mode - it will come out it its own after a while. He goes to the login screen and wait about another hour before falling asleep. That's when it is plugged into the power - and no LAN.

  2. when I close the lid to put the laptop into standby - and while on battery - after awhile he will supply any. Connect the power supply won't do anything - the power light not at all - which suggests that the laptop don't even note not be plugged. I have to then remove the battery and turn the computer on (thus losing all the data that I had when I put the computer to sleep!).

  So, have you seen this issue with your satellite pro? This is something common and being ignored - or y at - it an easy solution for it?

  Thanks in advance.

  -Audette

  Hi Audette,

  I have the Satellite U500 also but I can t notice any question about fashion 'sleep'. It works perfectly with an OS preinstalled Toshiba and the latest version of the BIOS. Then perhaps you need to update the BIOS as suggested Timox.

  Before you begin the update, close all running programs (also, AntiVirus and firewall), make sure you are logged in as administrator and do not stop the computer being updated.

  By the way: you use the preinstalled operating system from Toshiba?

• The mouse does not work on my new Satellite L750/L755

  Hello world

  I bought a toshiba Satellite L750/L755 but the mouse does not work, I have no control on it that if I use an external mouse, while I have put pressure on the touchpad.
  I tried the following options:
  I updated the driver - I changed the operating system

  but nothing, still the same problem. Next laptop will be a Mac for sure.

  I look forward to hear from you

  Daniele

  Hello Daniele

  It's really strange that the touchpad does not work even if you have installed the right driver and installed the operating system again. At the first moment, we can say there is probably a hardware problem, but please be sure touchpad is listed in the Device Manager and also active correctly (FN keys).

  Check it please all the properties of the mouse.

• Initial start-up does not not on the new Satellite L750 Pro

  I recently bought a new laptop of Toshiba Satellite L750 Pro. I connected on AC power and the laptop. The statement said initial start-up can take up to 2.5 hours, however, it has been more than 8 hours and nothing has changed. Also the screen is not that fake black used when the screen is turned on, it is 'off' black.

  Help, please.

  Try to start the installation program once more.
  Turn on the laptop, press F8, choose repair my computer and choose HARD drive recovery.
  Usually the installation of recovery should start once more and needs to be reinstalled the Windows operating system

• All new Satellite W30T-A-101 died after running Setup

  We have a major problem with a new Toshiba Satellite W30T-A-101. After running in the process configuration of Windows 8; and using the laptop for less than an hour. Suddenly, the screen is empty. The laptop is connected to the power supply; and we have tried power cycling. It fails to start in tablet mode or laptop. It's a cell DEATH. It is very unusual for Toshiba, but I am worried because it was actually made in October 2013... ! Could there be a problem of batch processing?

  Before I return it to the retailer for a refund or replacement of tomorrow; I would like to know if these 2-in-1 laptops are not reliable and I should move away.

  Having owned most of Toshiba laptops, it's unexpected, but very disappointing.

  > Having owned many laptops Toshiba, it's unexpected, but extremely disappointing
  I can understand you. It's really unexpected, but... it happens.

  Date of production is not so important. Day of purchase is important. Bring it back to your dealer and ask for replacement. Do it as soon as POSSIBLE.

• Keyboard mixed up on all new Satellite C850-1F1

  The keyboard of my brand-new Satellite C850-1F1 is involved. 64-bit Windows 8 is installed.

  Space bar allows a 'p', 4 provides a 'f', 6 provides a "h". But most of the keys work properly.

  When using an external keyboard it al works fine. I tried different language settings and countries, nothing seems to work.

  Any ideas?

  > When using external keyboard it al works fine

  This means that your internal keyboard is the troublemaker.
  The internal keyboard needs to be replaced to fix this.

  Get in touch with authorized Toshiba service point to get the keyboard replaced.

  Welcome them

• installation problems installing Flash 10.3 for Firefox Win7 32 bit _1.exe, 1_1.exe, etc.

  I've had trouble instlaling Flash for Win7 32 bit for Firefox for some time now.  I think that the problems started w/Flash 10.3.  In the past, I had recourse to alternatives such as uninstalling Flash via Add/Remove programs then go to pages like http://www.adobe.com/software/flash/about/ to force the Flash to be installed.  That does not work now that he's trying to recover 10.3.183.7 (not the most recent version: 10.3.183.10) and omitting.

  Basically, my steps of reproduction are:

  1. with Firefox (currently 3.6.23), visit http://get.adobe.com/flashplayer/ )

  2 deselect Yes, install McAfee Security

  3. click on download now, save the file

  4. double click on install_flashplayer10_mssd_aih.exe in the downloads window

  5. click on run, then Yes in the UAC dialog box

  Result:

  Hard drive stolen keeps thrashing, but Flash is not installed in the end.  If we turn the Task Manager > processes tab, we'll see this chain of .exe basically being launched, and then go away. Basically, you will see the 1 .exe listed below, that goes, then the other and so on...

  install_flashplayer10_mssd_aih_1.exe

  install_flashplayer10_mssd_aih_1_1.exe

  install_flashplayer10_mssd_aih_1_1_1.exe

  install_flashplayer10_mssd_aih_1_1_1_1.exe

  Currently in my E:\temp dir (which is what is on my TEMP environment var), I see install_flashplayer10_mssd_aih_1_1_1_1_1_1_1_1_1_1_1_1_1_2_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_ 1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_ 1_1_1_1_1.exe and a few other copies in the United Kingdom.

  I am obviously not the only one to hit that I see a mention in the http://PC-news.ldblog.jp/archives/51773493.html but no solution.  (No I can't read Japanese.)

  What is the right way to solve this problem?

  Could you try the following steps to see if they help?

  1. download uninstaller stand alone

  2. close all browser windows

  3. launch the uninstaller

  4 restart your computer

  5 remove the following folder, depending on your operating system:

  • 32-bit Windows - c:\Windows\system32\macromed
  • Windows 64-bit - c:\windows\syswow64\macromed

  6. download and install Flash Player located here:

  • Flash Player for Internet Explorer
  • Flash Player for other browsers

  Thank you

  Chris

• Satellite A200 and Win7 64 bit - card reader and touchpad drivers needed

  Hello, I got a Toshiba laptop-

  Satellite A200-1QZ
  Weight: PSAE6E-07700HGR

  Now I install Windows 7 64 bit - after the installation of the card reader and mouse pad apps are on order!
  I used the list of all the drivers - for 32-bit vista compatibility and so on, but the pieces do not work!

  Please gave me a quick response if I get the system still running!

  Thank you for the Germany
  Steven

  I ve checked the Toshiba download page, and as I can see, your laptop model is not supported for Win7 64 bit. It is supported for 32-bit only. So please can you us the drivers you are using for 64 bit OS?

• Problems printing reports from Magny accounting V16 (win7 32 bit)

  Hello

  I am haing issues with our Hp C7180 (connected wifi printer)

  We have 2 printers on the system, a Lexmark is also installed.

  When you try to print a "notice of pay" Magny accounting V16...

  If the Hp C7180 is the default printer... MYOB breaks down...

  If the Lexmark is default printer... Prints ok...

  If the Lexmark is default... myob will build the report ok and I can then choose to print to the HP C7180 and it prints very well...

  If its only if the HP is selected by default when you create report... which causes the program to crash...

  Strange driver problem?... I loaded the updates for the drivers of Hp... through HP update...

  The system is Win7 32 bit

  Other reports seem to work ok... with the ch as default...

  We used the years Lexmark printer (16 MYOB is dated program)... never a glitch...

  HP seems to be ok for the most part, except the tips of the payroll reports...

  I doubt that it is the program MYOB causing the fault... I mean that a printer is a printer isn't?

  Thanks for any answers

  DMG

  Thanks for the reply.

  I just thought I inform HP incase the problem is also with the never the Versions of MYOB, I can't test those since we only V16.

  The work around is enough, since I'm only using the printer to blow through a cartridge expired HP, will return to the use of the Lexmark when its empty.

  See you soon

  DMG

• SEVERAL problems with the new X 34

  So, I have been active during the overclock.net forums concerning the many problems I am having with my X 34.

  Long story short, I'm back this thing to Newegg and waiting for another delivery. But I thought I'd come at least here because it has high liklihood to return to anyone who cares to Acer. I called their tech support to let them know about the issues, but when the old Indian robot for 2 years at the other end kept referring to as resolution of refresh rate, I decided that I couldn't take more.

  So I took delivery of the monitor yesterday and he initially worked well... but the longer he stayed, the more problems, he has developed.

  My system is one I built a year or two ago and works perfectly with my Dell 3008WFP. Video card is a brand new MSI 980 Ti Lightning. Operating system is Windows 10 x 64. Is a Corsair 750W POWER supply. 16 GB of DDR3 RAM.

  I even made a COMPLETELY new install of Windows 10 on this computer to try to resolve these problems. Did not work. I have disconnected/reconnected everything inside my computer, including RAM and GPU. Did not work.

  And Yes, G-sync is enabled in the NVCP. And Yes, I manually set the refresh rate in the NVCP in correlation with the manual settings on the monitor.

  Problem no. 1: Menu recording does not settings

  -Don't know what the problem is here. But for about 3 hours last night, my monitor would not save settings for serger refresh rate. I would go on the menu... allow the serger... Set it to 100 Hz... Select "Apply and restart. Then (here's the interesting thing I think in hindsight), the screen would flash many colors several times and restart. I assumed that flashing color was normal... but it was never the Predator Logo when it has been reset. The office is finally pointing upwards and I could choose 100 Hz in my NVCP... but when you returned from the settings menu, Overclock was Off back with the default refresh rate. I have nothing would fix it with the reset of the monitor and unplug. Later... I have unplugeed the monitor for 30 minutes and when I plugged it back in, it would save my overclock settings now. It is interesting, but now, when I selected "Apply and reset", he would show the Predator logo when restarting... this logo did not appear before.

  Problem #2: Flashing screen

  -See a video of this question HERE

  -This developed before my eyes. After the initial installation of the monitor, it worked fine. Without no flicker, no problems. But as I was sitting at the dinner table last night, I started to see the monitor flashing intermittently in the other room. I look at the screen, he flickered about 4 or 5 times per minute. For the next hour, he progressed to 30 - 40 times per minute. And subsequently developed in constant blinking. BUT this flicker only happens when I go to the Office at 100 Hz. It happens sometimes in games, but not constant.

  I first thought that I had a bad cable of DP since I used one from Amazon, if I swapped it for the Acer cable included. Nope... same problem. I even inserted my previous EVGA 780 TI... but the flicker that happens too.

  Then, I thought it was a driver problem, I did a clean install of the nVdiia previous drivers. Nope. Then a cleaning installed latest drivers from nVidia WHQL. Nope.

  Then I saw here that you can download the drivers for the monitor directly from Acer. So, I did a guy like an unsigned driver installation. Nope.

  After all this, the problem persists.

  Strange thing about this one is that there was when I first got the monitor but got progressively worse since I got it.

  Another weird thing is that if I have a window open, then it isn't twinkle... reduce the window, and he comes back. It's actually what made me think, it was a driver issue, but as you can see above, I think that I have ruled that that fully.

  Also, if I set my refresh rate to 95Hz or below, the problem occurs. (This is actually how I currently work).

  -UPDATE: the issue has actually started just after executing i1Profiler to calibrate the screen several times back to back. I can't imagine how, but could the rapid exchange of multiple colors full screen damaged electronics somehow? Or is it just a weird coincidence?

  -UPDATED #2: it was suggested that ADC can cause the problem as it caused problems with the previous Acer monitors. So I completely deleted i1Profiler and reset my default .icc profile. I also think that I figured out how to do a monitor factory reset - if you hold the buttons first and fifth, restarting the screen and all the default settings. in any case, does too and the blinking persists...

  #3 problem: Backlight horrible bleeding

  I have to type anything here? Leave some pictures to speak for themselves...

  

  

  Trouble #4: Parts of the screen does not not on

  It has been described elsewhere, so I won't detail it here. But yes, I have the same problem. Here is a representative of my monitor picture when the issue arose.

  

  Overall, I am extremely disappointed, although I can't say I'm surprised. I mean, we deal with Acer here guys... Not exactly known for the high-end products. You can put the red lipstick on a pig...

  So is there more any idea or suggestion out there?

  Until then... I'll wait for my new X 34 excerpt here from Newegg to see if I won the lottery of Acer he...

  I created this post to be a "accepted solution" to this thread with the purpose to help other users who need to find the answers. This should help to find this information faster than to have to go almost 800 posts to find pieces of information.

  Wake up from sleep (backlight) - initial response and follow-up

  Problems with Overclocking at 100 hz - original response

  Coil - Whine Original response

  Color banding - users in Australia reported the problem. The teams in the region to THE have been notified and a firmware is available.

  -Scanning lines Original response

  Thank you
  Cory

• Several problems. All kinds of errors and BSOD

  I bought my machine with Vista installed.  I had the service Pack 1 & 2.  Suddenly, for some reason which I cannot determine, I get a notice in the lower right of my screen telling me that this copy of Windows is not genuine.  I also get believes that 'Windows Activation Client has stopped working' and "SL UI Notification Service has stopped working".  There are many other vaissaille one that said something like "Newdev.dll is not designed to work with Windows or is defective.  I paraphrased that one, because it is long and don't stay on the screen long enough to get it all.  Several times, the machine did not start.  Startup Repair have run and this time to start the computer, but I still get all the messages above and more.  I did the recovery disc, when the machine was new - no disk Vista not supplied with the machine - but when I tried to run, the process has stopped and said that I couldn't recover with these discs, because they are not applicable to this computer.

  How can I fix this mess?  Why the machine tells me that my copy of Vista is not genuine?

  Take care of the "not geniune' delivers first.
  1. activation by phone

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  Scroll down to step 2: how to do a phone Activation.
  Note: If the activation service informs you that she has failed and cannot help with activation, thenSTAY ON THE LINE and your call will be transferred to an operator of activation which will help you to activate your copy of Vista.

  2 here is a response from Keith, Microsoft Support, moderator, on this subject.
  Date: April 29. 2010

  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/6efea9fd-70a9-4530-88c8-93fd7b2d5484

  3. how to activate Windows Vista
  http://support.Microsoft.com/kb/940315

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.