Re: Tecra A11 - 11Z goes on with power adapter only

Similar Questions

• My Tecra A11 - 11K new comes with w7-64 bit, but I need w7 32bits

  My Tecra A11 - 11K new comes with w7-64 bit, but I need w7 32-bit because of an old program that I use for professional use.

  I bougth a w7 32 and 64 b license.

  My question is how to install w7-32 more than 64. I think that it is as easy as plug-and - go CD. Yes?

  But I want to preserve utilities Toshiba, other programs that come with the w7-64 pre-installed. Where can I get them? The Toshiba Download Center?
  And which one I need? All the?

  Thank you for your help.

  > My question is how to install w7-32 more than 64. I think that it is as easy as plug-and - go CD. Yes?

  Do you mean that you have a Toshiba Recovery disk?

  If Yes, then it's like you said; put the recovery disk in the CD/DVD drive to start this disc and during the procedure, you will be asked which version you want to choose.
  Then choose 32-bit that s it ;)

• Satellite Pro L100 - WLAN works with power current only

  W Lan works only with power supply, not the internal battery (battery) cable. Here is someone who can give me a solution for my problem

  Greetings

  Andreas

  Hello

  Have you tried to disable the option in the WLan card properties?
  If this is not the case, do it!
  I guess that the power save option is enabled and if the laptop works only with battery card don t get enough power.

• Tecra A11 - 11 H - error: RTC power failure

  Hello

  You have a problem with my computer toshiba laptop, A11 - 11 H. From the start, when it has been disconnected (without battery) it will prompt "FAILURE of POWER RTC" press F2. It returns the BIOS settings for the date it was made on 13/05/2011. Once I entered the correct settings and restart it works perfectly.

  I think it's missing the BIOS battery (6 months?).
  So the question is where is the CMOS battery located?

  Get out of the motherboard, I can't honestly see it. He has none?
  Also does anyone know the part no for CMOS battery? I would really appreciate the help guys.
  Let me know, Dan

  BTW, I've had this laptop upgraded to 8 GB RAM and 750 GB HARD drive.

  Hello

  Battery CMOS (RTC) is soldered on the motherboard and cannot be eliminated as on the Office PC motherboards.

  But you can recharge the battery of the CCF. In this case, the main battery must be connected. Then plug the AC adapter and turn on the laptop. Laptop should then operate for a period of 24 hours in order to recharge the RTC battery

• Tecra A11-128 does not start - black monitor, only the fan is on

  My laptop starts to boot, a few seconds later, the fan runs all the time and at full power. Here the detailed steps:
  -Push the Start button (battery led is green)
  -the hhd led is green for a short time, then off
  -l' screen is black all the time
  -After a few seconds, the fan starts at full power
  -That deer situation change either, I must break with 5s on the Start button

  I tried several keys (Fn + F2, ESC, F5) while starting up, as an external monitor. Nothing has changed.

  Who has an idea? Thank you very much for your help!

  Hello

  If the start of the BIOS (or Toshiba) screen does not appear, it means that a serious motherboard hardware problem can cause this RAM modules or malfunctioning CPU would be possible
  Recommends checking the memory RAM and CPU modules
  The RAM modules could be replaced easily but it of difficult to replace the CPU and test it. Therefore, it would be a job for a technicians for laptop

• problem with power switch only works a 'cold' start after pushing several times.

  Original title: power switch problem

  The power switch on my computer doesn't work as a 'cold' start after pushing several times.
  Could I have accidentally re-set one "true or false? spend in the registry while trying to solve another problem?
  Dave

  Hello

  Looks like that the power switch has developed a problem, probably about to fail.

  Whatever settings are they should be consistent and not need to several tests.

  Check with a real computer store (the one that makes its own internal and no service
  leeks and glances at a Best Buy or other stores) or system manufacturer support
  (for systems custom Integrator system and the manufacturer in the case of construction of House).

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Tecra A11 - less than 10 ips in Skyrim on

  Hello
  I have a Tecra A11 i7 which came with a wiped HARD drive
  I installed win 7 pro and the drivers from the Toshiba site, including the pilot Intel Turbo Boost Technology.

  Even with all the settings set to low temperatures, vid Skyrim runs only less than 10 frames per second.
  I upgraded 4-8gig ram, but this did not help.
  The GPU is Intel, so I can't use Geforce experience.

  I have a Dell Vostro V131 i5 which takes place to better Skyrim.
  But the screen is smaller and i/o ports are 90% of dead, so I'd rather use the Toshiba.

  There are 4 "unknown devices" in Device Manager, but none of them look relevant.

  Does anyone have any ideas?

  Thank you

  To be honest, I have no reasonable explanation because I don't have this video game and can not test it on my Tecra A11 - 19M.
  In my opinion this Tecra is typical business very bad for the games and the machine for office work.
  It does not offer good graphics performance and it is not the best for gaming.

  I use it for daily activities and games use different model Satellite P with nvidia GPU.

• Tecra A11 - Compatible to express port replicator?

  Hey people, does anyone know if a Tecra A11 can be used with version PA3508E of the Express duplicator?

  Cannot afford the new while I'm between jobs, and I saw one of these 2nd hand on ebay.

  Hey

  Replicator Port Express is not compatible Tecra A11 and Tecra A11, you use the Port Replicator II with PA3680E-1PRP part number specifications.

  The second version of this port replicator is designed for these new models such as the Tecra A11 :)

• I have a G61 that won't start with the power adapter in, is this normal?

  My CA G61 - 320 will not start.  With the battery and the power adapter in, front power light blink 3 times.  With and without battery power adapter only, there is no lights at all and computer remains off.  Should not the computer always start and run with the power adapter even if the battery is dead?

  Have you tried with another plugged AC adapter and remove the battery?

  Kind regards
  ERICO

• Satellite C600-258 starts with black screen only

  Hello

  This laptop was working fine this morning but returned to use it at the moment, the screen has no display.

  When the laptop is turned on, fan can be heard, 2 green lights are on but nothing appears on the screen.

  Suggestions, please?

  Thank you

  Two green lights?
  Your laptop is connected to the power supply current?

  Try to remove the battery, leave for a while and test it with power current only.
  Is there activity HDD (HDD flashing led)?

• Can I use a power adapter that provides the samilar voltage but a different amperage?

  Hi all

  The specs for my original AC of a dv6-1355dx adator are:

  Input: 100 ~ 240 V, 1.6 has, 50 - 60 Hz

  Output: 18.5 3. 5 a, V

  756

  The plug of the adapter nearest you, that I could find online of dv6 is:

  Input: 100 ~ 240 V, 1.5 has, 50 - 60 Hz

  Output: 19 V 4.74

  90W

  Can I use it to replace the original one?

  Thank you so much and have a nice weekend!

  Yes, the HP Pavilion dv6-1355dx Entertainment Notebook PC comes with power adapter 65W.

  http://support.HP.com/us-en/document/c01893242

  The 90W AC adapter / you provided has no problem as long as the part fits, there are only two sizes (4,5 and 7. 4 mm).

  To ensure that you get the compatible adapter, take a look at the

  HP 65 w Smart AC adapter

  
  For HP laptops with connectors 4.5 mm or 7. 4 mm

  http://www.shopping.HP.com/en_US/Home-Office/-/products/Accessories/AC-adapters/G6H42AA?HP-65W-smart-AC-adapter

  Here are the following features and benefits to get the Smart AC adapter.

  Smart cards can improve your productivity by feeding your computer laptop while that plugged in, as well as the charge of your battery so that you can take your laptop with you when you disconnect. HP Smart adapters also have built-in overvoltage protection to protect against current fluctuations that can damage your laptop. Help HP Smart adapters you can save on materials, energy consumption costs and travel.

• Re: Qosmio F - flashing screen with AC adapter / CC

  Hello

  I have a problem with the fo my qosmio screen. When turned on ca it flashes when it is not only with the battery.
  Do you think that this is a problem with the adapter only?

  Thank you
  Panas

  Hi panas,

  If this happens with the AC adapter / CC only he could be a grounding problem. Are you using the original Toshiba AC/DC adapter or the adapter part 3?
  By the way: laptop Qosmio what you have exactly?

  This also happens if you connect an external monitor or only with an intern?

• Feature WiFi of Tecra A11 goes out several times per day

  I have a Tecra A11 S3540 and he began arresting capacity wireless itself. The switch is turned on and I updated all drivers network card.
  What should I do to fix this problem, because it is difficult to work on the laptop!

  This behavior has something to do with food?
  I mean, that arrive with AC power and battery supplies?

• Tecra A11 with 8 GB of RAM, installed as shown in 64 bit 32 bit with 2.98 RAM usable

  Tecra A11, new March 19, 2011, with the first installation? good word? Windows 7 Professional. Setup was easy. Open the computer, turn it on, follow the prompts, select the check box for 64 - bit, etc.. But present in control PANEL / SYSTEM AND SECURITY / SYSTEM as having a 32-bit operating system with 8 GB of RAM, RAM can be used WITH 2.98
  .
  Has no disks to reinstall from. No partition to leave. Listening to the phone Toshiba menu system, I can create Media Recovery disks from the computer, but if it happened once it happen? Tips on where to go from here please.

  Still have access to the previous, Toshiba laptop with Windows 7 Home Premium but also so can transfer all the data that it and start over.

  You have created a set of recovery using the Toshiba Recovery Disc Creator disks?

  Make boot from disk 1, and then select 64-bit when prompted. See how it goes.

  You can also update the BIOS because it is a new model.

• Dual boot with Windows 7 and LINUX - Tecra A11 (PTSE1A - 005-00L)

  Hello

  I bought a new Tecra A11 computer laptop running WIN7 Pro. I want to install LINUX also. This means that I want to run my laptop in dual boot Win7 Pro/LINUX (a Distributor). Please tell me how to do this.

  There are 5 partitions on the HARD disk:
  1 active, recovery partiton 1.46 GB (without drive letter)
  2. principal asset C: start 145,04 GB (NTFS)
  3. active logics E: 78,13 GB (NTFS)
  4 active logical F: 64.25 GB (NTFS)
  5 primary Partition 9.2 GB (no drive letter, the unknown application)

  Hey, I need because I was admitted to a course of RHCE (Red Hat Certified Engineer)

  Please help me

  Hello

  I can't give you a step by step explanation, but most distributions offer today a possibility to coexist with Windows.
  When installing the unused free space will be taken by Linux (with the consent of the user of course!)

  What exact configuration you need is impossible for someone else to say, but I would say to make the space occupied by the F player available for Linux.
  You seem to have of enough space for Windows and Linux operating system doesn't have much.

  Some thoughts about setting up your score:

  I touch NOT 1,2 and 5 no matter what. They are your system and a system of internal partitions (recovery and data environment) and wouldn't it be fun to lose.

  1 active, recovery partiton 1.46 GB (without drive letter)
  2. principal asset C: start 145,04 GB (NTFS)
  3. active logics E: 78,13 GB (NTFS)
  4 active logical F: 64.25 GB (NTFS)
  5 primary Partition 9.2 GB (no drive letter, the unknown application)

  Then choose a Distro (Ubuntu, Mint, Fedora and OpenSuse - suggestion Fedora will be as close as possible associated with RedHat) that will guide you in the steps to allocate space for Linux.
  I suggest however to remove the disk F in Windows for Linux does not start from resizing all partitions.
  I do not know which works perfectly, but will just take time, and will most probably remain pretty useless drive F.

  If you have valuable data on your device, make sure to save! No software comes with warranty :)
  Last but not least - make 100% sure to create a collection set using the Toshiba Recovery Media Creator before you start the installation of Linux.
  If something goes wrong you have the opportunity to put the unit in factory condition.

  Good luck and keep asking you if you need extra help!

  Tom