Re: Tecra A11 off when booting from a CDROM of Imagecast 6

Similar Questions

• How to force boot from the CDROM on Satellite M40 183

  I have error in the MBR on the drive in my laptop, it doesent from disk, before I had put into hibernation system (Windows XP).

  Now, I can't force boot from the CDROM
  in the bios, CDROM is selected as first boot-> nothing
  on bootking, I am pressing end F12 choose CDROM icons-> notking
  on bootking by pressing 'c'-> notking

  and I have a problem:
  -system does not boot
  -recovery disk will not start, and I can't fix it :/

  I'm sure that the cd drive is right.

  I recognized before, makes this hibernation, it is imposible to boot from the cdrom

  but there must be a way to force anyway.

  Thanks for any help.

  Mateusz

  Hello Mateusz

  The hibernation mode cannot be responsible for this kind of question. I'm sure that this option is properly put to the test and if there is some sort of suspicion it won't be available more.
  If you have any problem with MBR, it can also be damaged by some kind of virus. As far as I know that the easiest way to repair or rebuild MBR is to run the standard Microsoft called FDISK utility with a parameter/MBR, as
  A:\ > FDISK. EXE/MBR
  FDISK is a standard utility included in MS-DOS, Windows 95, 98, me.
  Please check this page http://www.microsoft.com/resources/documentation/Windows/XP/all/reskit/en-us/Default.asp?url=/resources/documentation/Windows/XP/all/reskit/en-us/prkd_tro_evwd.asp Microsoft
  Good bye

• Tecra S1-can not boot from original Windows XPP

  When I try to boot from a CD of SP1 XPP Windows original mine Tectra S1 gave the following message is displayed:

  Boot CD-ROM type: Non Emulation boot

  After message, press a key to continue, but I had many reading errors.

  I have the latest BIOS (2.5), no system of work.
  I tried many CDs XPP original Windows, but no one works.

  Can someone help me?

  Hi Digin

  Is this the same message when you use the restore CD?

• Tecra M2: Can I boot from USB/Firewire-drive external HARD?

  Hi all

  How can I boot from an external USB drive?
  The Bios 1.20, 15/03/2004 does not seem to support this on my Tecra M2.

  I have a Maxtor 300Gig external HARD drive that can be connected via Firewire or USB. Usually, I use a PCMCIA card Firewire to connect the HARD drive, which has 3 partitions.

  It would be also possible for a start-up by PCMCIA Firewire?

  Thanks in advance.

  Lembong

  Hello

  As far as I know it of not possible to boot from a USB HDD. I know that in some cases it of possible to start compatible USB FDD drives and CD/DVD but the HARD drive note.
  This theme has been removed from the service a lot of time here in the forum.

  Please check this announcement on the other:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=4534&MessageID=14824#14824

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=8963&MessageID=31325#31325

  Concerning

• Problem when booting from USB and bootable DVD

  I tried to boot from a bootable DVD to try Linux and install it. So pressing F9 to select the boot device, so I chose DVD ROM drive But it still does not start.

  Note: It starts on the first run. When I restart the PC and try again to start from the DVD, it jumps the DVD playback. Same thing happens with the USB key. I tried all USB ports.

  Another time all USB ports too and this pen drive work well and the DVD. Don't know what the problem is.

  Please tell me is there any problem with the BIOS?

  Thank you.

  
  ____________________________
  | Please hit Kudos, if I help you! |
  | |
  | WILL |
  |___________________________|

  In each market, unless F9 (for most HP computers and laptops) is selected to change the order, BIOS will look on the bootable devices (USB HDD, ODD,) in the order that they are configured in the BIOS settings.

  A usb device is not in the list of the BIOS boot order, as it is generally not available and only temporarily inserted.

  Best regards

  ERICO

• Trying to remove virus format hard drive - when booting from the Windows XP CD, don't teach me to press a button to proceed with the installation?

  Trying to remove virus, need to format the hard drive to remove all programs to remove the virus.  I ran several security programs which has not found a virus.  Taken at Best Buy, they ran their programs, could not detect viruses, but said there are something certainly on my system.  System is pegged almost 100% all the time, so I can't really use the pc.

  Reinstalling the operating system is usually not necessary to remove the malware, but if you're convinced that this is necessary (it is sometimes), this guide is a good:

  http://michaelstevenstech.com/cleanxpinstall.html

  (this assumes that you have the appropriate Windows XP installation CD)

  Of course, you will need to boot from the CD instead of the hard drive. This page explains that:

  http://michaelstevenstech.com/bios_manufacturer.htm

  You also need to install the hardware drivers. I hope that you have them on CD, too. If this is not the case, the web site of the manufacturer of PC should have them.

  Since a clean install wipes EVERYTHING, you should have all your data copied beforehand.

• Get 4 disk error when booting from a CD on Windows 7

  Having a problem starting at a BIOS from a CD on my Inspiron E1505 laptop. With the help of Windows 7 Professional. Don't know why, it should work... I have it set up correctly and everything to boot from the CD player, here is the problem:

  ISOLINUX 3.11 Debian-2007-03-12 Copyright (c) 1994-2005 h. Peter AnvinLoading... isolinux: disk error 04, AX = 4200, driving 82Boot failed: press a button to try again...

  If anyone has a solution let me know, I'm stumped.

  It is a system of more than 5 years.  Have you checked for an update?

• Cannot boot from the CDROM on a satellite A100-549

  Hello.

  I think I have a problem with my BIOS because I can't start something of my CDROM.

  I removed the recovery off the DVD-ROM drive CD and restarted my computer.

  Then set up the boot sequence to boot from the CD, and nothing happened.
  My laptop just start with the normal boot sequence, I mean from the hard drive.

  I put a livecd for the CDROM drive and the effect was the same, the cd does not start and the computer began the ususal boot sequence.

  Can someone tell what is the problem?

  Thank you

  Hello

  Try to use all possible methods to set ODD as first boot device:
  1. press the key C immediately after switching on the unit, keep it down for a few seconds
  2 put in the BIOS
  3. choose F12 after departure upward and choose the CD/DVD device

  Honestly, it's very strange and if nothing helps, maybe you should contact your dealer or authorized Toshiba service partner directly. They check the disc.

  BTW: have you noticed any other problems with ODD Windows?

• Booting from the cdrom

  Just got a brand-new 4235 ID device but there 2.2.5.1 on it. I have the

  3.0 (1) S4 upgrade CD. But how do you repair the unit to boot from it? I have a pc keyboard and monitor directly connected to the probe. Do I have to change the boot settings in the configuration utility? What keys used to emulate a 'Stop' + 'A' a Sun keyboard?

  Any help would be appreciated.

  You are right on 4230 devices. They carried before we changed our method of installation/restoration and are not configured to boot from the default CD-ROM drive. I don't remember when change rolled in the production of 4210, but all * currently * navigation devices are configured with the correct boot order by default.

  The instructions for the upgrade/recovery of sensors using the reference of the CD (version 2.5 and later) checking the boot order in the BIOS, but do not go into the details of how change it.

  For SNS and IDS-4220/4230 platforms:

  1. enter in the BIOS by pressing F2 during boot of the system (at the prompt).

  2. go to the "Start" menu and select "Boot Device Priority"

  3 select a boot device and use '+' or '-' to move the unit upwards or downwards in the list until the boot order is correct (removable devices > ATAPI CD-ROM > hard).

  4. press to exit the Boot Device Priority menu.

  5. go to the menu "Exit", then select "Exit Saving Changes".

  For the IDS 4210:

  1. enter in the BIOS by pressing F2 during boot of the system (at the prompt).

  2. go in the menu 'Boot.

  3. Select a boot device (1st, 2nd, etc.), then press.

  4. Select the appropriate device in the list (diskette, CDROM ATAPI or IDE-HDD) and press again.

  5. check the changes match the following:

  1st boot Device: [disk]

  2nd boot Device: [ATAPI CDROM]

  3rd boot device: [drive HARD IDE-]

  6. go to the menu "Exit", then select "Exit Saving Changes".

• Keyboard and mouse not working not not when booting from cd or dvd

  my system is working properly, but when I want to start any dvd or cd right now the keyboard or mouse turn off automatically. Now this time the selection of keyboard for the option 'Start of normal windows' increase to "repair windows", & do not go down... How to solve this problem of keyboard & mouse?

  Hello Arnaud,.

  Thanks for posting your question on the Microsoft Community.

  I would like to know some information about the problem so that we can help you better.

  1. What is the brand and model of your computer?
  2 - is your computer boot to the desktop?

  Thank you for details on the issue.

  This problem can occur because the parameters or corrupt device drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Update the drivers of chipset of the computer manufacturer's website and check the issue.
  Reference:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Tecra M10 hangs when booting with the new OEM battery

  Hello world

  I bought an OEM battery for my tecra and now the laptop freezes at boot (the screen remains black with a flashing underscore) with the battery connected.
  I have to remove the battery, connect the AC adapater, turn on the laptop and, after loading of windows, and then connect the battery.

  Any idea?

  Thank you

  > I bought an OEM battery for my tecra and now the laptop freezes at boot (the screen remains black with a flashing underscore) with the battery connected.

  In most cases underscore flashing is related to the problem of faulty RAM or HARD disk.
  In my case, the HARD drive was defective and so I had the same symptom for laptop.

  I m not very well where is the link between the blinking underscore and the new battery but the computer world everything is really strange sometimes and a lot of strange things can happen so maybe the new battery is defective

  Have you noticed this problem with the old battery?
  If not, then I recommend test another battery maybe it helps

• Tecra 8000 isn't boot from CD - how to enter the BIOS?

  Hello

  I have a 2nd hand tecra 8000.

  Now, it does not start from CD? I don't know why... but a question is to know how to enter the BIOS setup, because is not possible with the F2 key.

  How to enter the BIOS?

  Thank you too

  Francisco
  ([email protected])

  Hello

  ESC key to enter the BIOS settings.

• Tecra S1 (PT831E) - cannot boot from the XP installation disk

  Hi all

  I received this book, but it is secure.
  There is a BIOS password (which I have) and there is an administrator password which I don't have.

  With my user account, I can't install or change anything, so I want to erase the whole HARD drive and install a fresh copy of Windows XP, but I can't. I can't start from the installation disc or the Toshiba recovery software. I can't access the BIOS either, I tried pressing F12, DELETE, C, F1, Ctrl + tab + ESC,... but to no avail.

  I would gladly appreciate help because I have tried everything I know,
  Thanks in advance,

  Emmanuel

  And what happens if you press ESC on the Toshiba screen?

  I pretty sure that s ESC to the BIOS, but you can try other keys, maybe F2 m.

• My product key is not accepted when booting from the recovery disc even if I use the product key supplied by the manufacturer.

  I wanted to clean up my computer so I copied the data on an external hard drive and then partitioned and formatted my hard drive is internal. I then ran the recovery CD provided when I bought the computer of Evesham Technology.  However, when I provide the product key which is glued on the case of my PC I get the message "the product Id you entered is not valid.  What should I do?

  Kind regards
  Eric

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the letters and numbers (number 8 for the)
  Letter B, etc.).

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Users of Windows XP - Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• How can I get network connection when booting from the usb key or dvd

  Computer: HP Pavilion P6-2450eo

  Secure boot disabled

  Legacy Boot enabled

  Thruogh F9 I can boot into uefi since a key USB and DVD mode, but I can't seem to program loadet network connection. I tried with 13.04 Ubuntu, Linux Mint 15 and Boot Repair - all with the same result.

  How can I get the programs get started with network connection?

  On thanks in advance!

  poul1304

  Please check that the programs (Ubuntu, Mint, Boot-Repair, etc.) that you attempt to use it, press the controller Atheros AR8161L gigabit ethernet in native mode. Not all operating systems and software are supported each otut device or the network configuration of the box. Several times, drivers must be loaded or injected into the operating system for a device working properly.

  Please send Bravo