Tecra S1 (PT831E) - cannot boot from the XP installation disk

Similar Questions

• Satellite M45: Cannot boot from the CD-ROM or HARD drive

  I get the following messages...

  WHEN BOOTING FROM HDD: "Invalid partition table".

  At the START of the CD: "No Bootable CD in ATAPI CD-ROM.
  By so, even though I have the recovery CD and the computer can not read them.

  I tried to change the order of boot without result. Created a bootable CD Bart, who works in my other computer, but not in this laptop. Are there special drivers, I need for this CD?
  I'm out on this one.

  Thank you

  Hello

  I think that your partition on the HARD disk is damaged and so you cannot boot from the HARD drive.
  In this case, the HARD drive must be formatted completely and then you could try to install the OS.

  It seems also that your drive cannot recognize the CD bootable (WinXP?) and, therefore, it of not possible to boot from the drive.
  Well, it really stupid s :_| situation really stupid!

  However, did you try to boot from another CD? For example Microsoft Windows original CD?
  If not I recommend you to do and eventually the reader will be able to read the CD.
  If this isn't the case, so I think that the reader must be checked. Possibly it also corrupted s.

• Satellite M40 - cannot boot from the recovery cd after format HARD drive

  Hello

  After my Satellite M40 - 133 being affected by the virus of security internet I had to wipe my hard drive. The virus wouldn't let me do anything, boot without failure or system restore. I wiped the disk and it still wouldn't load up. That's why I had to do a full erase of the disk including the hidden partition.

  After doing his now do not let my boot from the CD of restoration as it says invalid partition as his search for files that must be on the hidden partition. What can I do to get it started. I'm not bothered about to recover anything on the disc. If I remove the hard drive and put the recovery cd in, it excludes the disc and begins to start until he fails to see the hard drive.

  Outwardly I can link the drive to another pc and he sees it as a storage device so I'm glad that there is nothing wrong with the hard ware - help please

  Hello

  Can you see the HARD drive with all the details in the BIOS?
  If this isn't the case, then this means that the HARD drive is faulty or not fully compatible.
  If you can see the HARD drive in the BIOS, then this means that the HARD drive is compatible.

  But this should not affect booting from a bootable CD.
  Even if the HD would not be recognized in the BIOS, you should be able to boot from the CD. For example a live Linux CD has not only any disk HARD because the BONE would not be installed on the HARD drive, but it loads into RAM.

  The question is; Why you are unable to boot from any CD?
  Maybe the discs are scratched or the CD/DVD drive cannot read the disc more because of problems of laser lens
  If possible, try to copy/burn the Windows CD using another computer, and then try to start using the copied disc.

• Satellite A200 - cannot boot from the recovery disc - code 1

  I have Vista business and my laptop is running slow and is full of rubbish.
  I have in the past used my drive recovery to completely re - install vista and start from a fresh version.

  However, I tried this once and it says that it cannot boot from cd - code 1.

  Can someone tell me what it is and how to reinstall vista?

  Hmm. strange.
  Are you sure you have the right recovery disk?
  Are you abele to boot using another drive as MS Win XP CD or Linux CD bootable?

• Cannot boot from the HARD drive in AHCI on Satellite C mode

  I tried to get this satellite working for these past two weeks. I think I've tried all of the suggestions I found on this forum and others.

  My problem: I can not boot from drive c: in AHCI, only in compatibility mode. I can boot from the D: (recovery partition) in AHCI mode. When the recovery is complete, and when it gets to the first reboot, try to boot from the system newly created on the C:, I return the compatibility mode.

  I replaced the drivers on the C: drive.

  I extracted the AHCI drivers and copied in the root of a USB bootable. I try to do a clean install of windows 7, I get to where it shows the partitions. He tells me that it can not load the system on any of the partitions, I the AHCI mode (if the mode is set to compatibility it will load the system in one partition).
  I select "load drivers" and select the driver in the root directory, it loads the driver and then reports that it can not load the system on any of the partitions.

  I'm puzzled. I acquired pilots everywhere, the last set of drivers I used to try to do a clean install, I have acquired the Canadian official Toshiba site.

  Does anyone have any suggestions?

  Concerning
  Boyde

  BTW, this is Windows 7, I'm trying to get back to.

  Can someone help me with this?

  Boyde

• Cannot boot from the CDROM on a satellite A100-549

  Hello.

  I think I have a problem with my BIOS because I can't start something of my CDROM.

  I removed the recovery off the DVD-ROM drive CD and restarted my computer.

  Then set up the boot sequence to boot from the CD, and nothing happened.
  My laptop just start with the normal boot sequence, I mean from the hard drive.

  I put a livecd for the CDROM drive and the effect was the same, the cd does not start and the computer began the ususal boot sequence.

  Can someone tell what is the problem?

  Thank you

  Hello

  Try to use all possible methods to set ODD as first boot device:
  1. press the key C immediately after switching on the unit, keep it down for a few seconds
  2 put in the BIOS
  3. choose F12 after departure upward and choose the CD/DVD device

  Honestly, it's very strange and if nothing helps, maybe you should contact your dealer or authorized Toshiba service partner directly. They check the disc.

  BTW: have you noticed any other problems with ODD Windows?

• Satellite A10: Cannot boot from the recovery CD after the replacement of the motherboard

  Heres one in your brain is going...

  I recently started a format hard drive via the normal recovery CD, but it never finished as long as the power cut.

  Not to worry I thought, I kept all my data and a new motherboard was on order.

  The fitting of the new Council, I tried to boot from the recovery disc and all I get is 'non-system disk '.

  Then I replaced the HARD drive with a former to check the functionality of the Cd. The old disks (I tried two) both still booted from the cd and their HDs has worked fine once in windows.

  However...

  When I try to start any of these 'good' HDs from the cd nothing happens, nada zilch. In fact they will not start even to a 'Beginner PC' recovery disk either, so it's not the Toshy recovery disk.

  Another weird thing is when I go into the bios by pressing ESC the power upward and then F1 and try to change the boot sequence and press end to exit and save, nothing happens.

  If the CD is not defective because it is recognized in windows
  The recovery disks may not be at fault because the other disks also fail to start.

  This is not a drive problem hard as other HDs start normally (but not Cd)

  This could be a fault on the new motherboard, perhaps a problem with bios, or the sequence of events suggests something else?

  Any suggestions would be welcome

  Paul h

  Hello

  Long story. In my opinion you should write is a little shorter but with more useful information.
  I am interested in one thing: have you got a new mainboard or used one?

  To be honest, I'm also confused with the recovery disc you are using. The history is confusing.

  > so this isn't the Toshy recovery disk.
  Can you please tell us what kind of recovery CD are you using exactly?

• Cannot boot from the Windows 7 installation DVD. Error when installing XP "this installation disc is not compatible with your version of windows. To upgrade, you need the correct installation disc.

  Please help me

  Why my cd not DVD boot? will have a difficult time install my win7 home ed I have xp and the note ""this installation disc is not compatible with your version of windows. " To upgrade, you need the correct installation disc. For more information, see your computer system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select custom (advanced option). "always keep flashing... I already did your post, but I cant stand dvd always turn to windows xp? and my driver working I just installed win xp months ago

  Hi the prey,

  ·         What is the brand and model of the computer?

  You should check the settings of the computer BIOS (Basic Input\Output System) to boot from the CD/DVD. Check the manual or the support of the computer Web site for the same.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Run the Windows 7 Upgrade Advisor to see if your computer is compatible to install Windows 7.

  Windows 7 Upgrade Advisor - download - Microsoft Windows

  See also:

  Installation and reinstallation of Windows 7

• I want to use the recovery disc for re - install my pavilion dv6, but cannot boot from the recovery disc?

  Now my system Windows 7 Home premium canbe accessed, but with a lot of problems. That's why I want to reinstall it. I burned my own recovery (totally 4 disks) successfully disks. I insert the first disc of recovery CD-rom and restart my laptop, but it can not recognized but in win 7 automatically. could you tell me how to use my recovery disks to reinstall the system win 7 when that is not totally broken?

  Hello

  Probably go to BIOS and configuration of the machine to boot from the CD/DVD ROM. Please follow the instructions from HP:

  http://support.HP.com/us-en/document/c00364979

  Kind regards

• (Redirected) Cannot boot from the HARD drive on dell n5010 with SSD and HARD drive installed

  I have my old dell n5010 (15R Inspiron) with SSD (Samsung EVO 840 120 G) installed on the main drive Bay and the HDD (Samsung HJJ 500 G) on the optical drive Bay.

  It is a typical way to add an SSD on such an old laptop (bought from dell.com.cn in 2011).

  My Windows 10 operating system has been installed on the SSD using Samsung Data Migration software, so the previous C drive was pointless. So I formatted and installed an operating system Ubuntu 14.04 on it, hoping the grub OSs double beginning located on the HARD disk.

  However, I find no the Dell bios boot option to boot from the HARD drive installed in my optical drive Bay. All the choices are 'Hard Drive', 'Network' and 'Diagnostic '.

  But I was definitely sure that my bios program has detected the SSD and HDD with information on the main menu of the bios.

  And the LED on the optical drive Bay was immediately once I pressed the Start button on my laptop.

  As a general rule, all things were right except for options of the bios boot.

  Is there a way I can boot from HDD (with installed Ubuntu) while remaining has my SSD on the main drive Bay? I don't want to swap their positions, because the SSD is super fast on the main drive Bay.

  I have alse won't migrate 10 Windows to the HARD drive and reinstall Ubuntu on the SSD, because I'd like my windows be loaded quickly.

  Someone at - it the same problem with me?

  Any suggestion is appreciated!

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• My Dell Precision Workstation 690 cannot boot from the drive - I need help

  My Dell Precision 690 Workstation is unable to boot from the CD Rom what's happening, it's that when I boot it (revision of BIOS A05) and I go to the Boot menu and boot from the CD Rom it says floppy seek failure. I don't know how to solve this problem and I don't have a floppy drive installed. I have installed windows but it gives me just a blue error screen then please help

  Thanks in advance

  Hi Yolega20,

  Well, the DVD drive seems to work otherwise? You have all other bootable discs you can try, such as the Dell drivers and Utilities disc?

• Qosmio G35: Cannot boot from the recovery disc

  I'm in trouble from the screen of my Qosmio G35 showing lines vertical, gel, then a loop on and outside.

  I used the Toshiba factory restore disc to reformat and the problem remains, I went further and chose the maquis of the HARD drive option. Bad choices made by this beginner, because now it does not recognize the drive at all, prompting me to "initialize".

  Lines remain, but it is not the material of the screen happens during some process that I follow, OK.

  A friend more computer over the phone prompted me to go into the BIOS, but we cannot access them. Research on the web, I tried the F12 suggested, but this does not work, just push me through in a screen offering 'Safe Mode' etc.

  Any help would be welcome. Thank you

  Hello

  Usually the vertical display lines looks like a hardware problem, in my view, it could be related to GPU failure.

  In any case, we should start first of all the problem of CD/DVD drive you must check if the disc is properly recognized in the BIOS.

  For this, it must Access the BIOS press the ESC (if Toshiba BIOS) or the key F2 (if Phoenix BIOS). Please check these two options because I m not 100% sure what the BIOS the Qosmio G35 uses.

  But like I said earlier the issue looks like a malfunction of the graphics card and you must contact the ASP in your country for assistance.

  Best regards & friend good luck

• Portege A200 - cannot boot from the recovery disc

  Hi, I have a Portege A200 and an original unused Toshiba Recovery CD.

  When I go to recover, the DVD drive just turns and turns and nothing happens. I have tried different methods of booting with the disk to like, by pressing the C key, select boot from CD/DVD or just turn it on with the DVD in the drive. Same problem, the disc turns right away.

  I also checked the drivers TOshiba download page and let down when I found out that there are several drivers for the same thing, like the 3 drivers LAN! Which should I use? Also, I can confirm that the CD/DVD drive works fine because I already loaded windows XP, no problem.

  Any suggestion is appreciated.

  Kieran99.

  Hey Kieran99,

  I also think that s is not a problem of the CD/DVD drive. If it turns over and over again once he recognizes a disc but it can t be read correctly.

  Regarding your question about drivers I think that it of fairly easy. I can recommend the vendor and device ID in Device Manager. With these identification numbers, you can search on this website http://www.pcidatabase.com/ to determine the LAN controller. All that s! :)

  In addition, you can check the ID s in Device Manager, if you click the LAN card properties > Details > PCI\VEN_xxxx & DEV_xxxx

• Iconia W3-810 cannot boot from the recovery disc

  Hi, I have a 32 GB Iconia W3-810.  The original recovery disk was lost.

  I made a Bootable DVD of 8.1 and also Win 8.1 bootable USB key.  These two have been tested on another laptop, and both can start this laptop to the installation environment.

  I also followed the guide to enter the BIOS of the Acer Tablet settings and change the boot order and change remove secure boot option.

  Unfortunately the unit keeps trying to start in Windows 8.1 - one who is full of viruses and should be flattened and start over.

  Help, please...

  Many of these cables power the Tablet via the splitter, but do not provide power at the side of the data cable from the side power (I don't think I explained that well). They are designed to power your device on the motor side while allowing access to data on the other side. If connected:

  Tablet- + - power
  
              |
  
              |
  
             DVD

  The Tablet receives power supply and Tablet provides the voltage and sends and receives data from DVD, but power does not give voltage on DVD. This means that the DVD does not necessarily receive the budget power that he needs.

  If you can, try the DVD connected to a powered hub. Turn upwards and actually to work are two different things, and tablets offer far less than the maximum power on their USB ports.

• Cannot boot from the CD-ROM drive

  I have a Dell Dimension 9100.  Operating system is Windows XP.

  The CD-ROM drive works great for playing CDs and recording stuff, but I can't boot from it.

  Everything is fine with my computer at this time, it starts fine from the HARD disk, but I anticipate before when I need to use Acronis image rescue media under my method of recovery after a disaster.

  For some reason any does not start my 9100 the drive, even after changing the BIOS boot sequence to insert 1.  My Dimension 4400 starts the CD player without problem.  4400 boots even in the backup media created in the 9100.

  I carefully followed the instructions in the Dell knowledge base article "How to configure a Dell Dimension series system to Boot to the CD drive", does not.  I opened the folder and reinstall CD drive connections.  In addition, I am at a loss.

  I hope someone can help me get this right.  Thank you.