Re: Tecra M9 and screen compatibility

Similar Questions

• Tecra S1: Empty screen and beep error Code appears

  Hello

  I have a toshiba tecra s1 and it no longer works, and I don't know why.

  When I start the laptop there is nothing wrong, but after 3 minutes or if the screen is not responding. Then I tried to reboot, it gives a black screen and beeps. The beeps are:
  short, short, long, break, short, short, short.

  And what he repeates himself. When I wait several days it will start again and then after 3 minutes it will "crash" again.

  What is the problem with my laptop? Why it works, and after 3 minutes no longer works?

  Thanks in advance.

  Best regards!

  Hello

  The laptop starts fine in the Windows operating system?

  Strange beep error code usually appears because there is a hardware problem on the S1 and the POST (power on self-test) cannot be passed correctly.
  If the computer falls down the POST, the computer then returns a beep code indicating what is causing the computer not not to pass on the MESSAGE.

  The problem is that all the different systems of BIOS support meanings of different code.
  As far as I know, Toshiba Tecra S1 uses Toshiba BIOS and only the ASP can read this code and know what it means. I recommend to contact the ASP in your country for assistance!

  PS: Check out this interesting page about additional information on computer POST / beep codes
  http://www.computerhope.com/beep.htm

• Tecra 9100 and compatibility with 32-bit/3, 3V PC Cards (PCMCIA)?

  I would like to increase the power of my WIFI.

  The internal card supports 802.11 a standard only.

  The Tecra 9100 Series is compatible with 32-bit/3, 3V-PCMCIA cards?

  Hello

  According to the specifications of the computer laptop Tecra 9100 is ready WLAN and can be upgraded with standard Wi - Fi 802. 11B. I have the same WLAN card on my Tecra M1 and I'm really happy. You can buy the Wireless (PA3189U-1MPC) recommended LAN card and like to be mobile. The transfer of data is OK and you don't need a better card for this good old classic.

  It is an old map and it won't be cheap. Check it out.

• Re: Crash on Tecra M3 of screen

  This morning my Tecra M3 green screen LCD turned and then slowly disappeared in a cloudy cloud.
  When I restarted I had a large screen with red and white rays online and weird graphics.

  Windows XP logo comes up but is covered with white lines vertical white followed by many bosses of white stripes horizontal but then the OS is not kick in and I end up with a white screen.

  Maybe 5 minutes later I hear the theme of Windows but still no office - nothing.
  I don't see/hear the spinning of the HD.

  I tried to boot mode safe, where I always get red and white patterns, but I can make the text to start safe mode.
  I have recently re-installed XP of the original system DVD (version 2006 - I think) and everything seemed ok so far.

  I have a load of work to go for HELP!
  Is is ok to continue working normally in Safe Mode - it is possible to connect in this mode?

  Help!

  Safe mode is option that offers access in the operating system preinstalled if there is a problem and that you cannot use it in normal mode. In safe mode OS will be loaded with a minimum configuration and without important driver. It is not the solution for you.

  If I understand you, now you have the own operating system preinstalled. Try to start as usual and see what happens. I fear you have serious hardware problem and there is not a lot that you can do everything alone. Is the defective LCD screen or the graphics card does not work properly. What you can do is to test it with the external monitor. If these lines will be displayed again it is certainly because of the faulty graphics card.

  In any case, contact service and see what they can do for you.

• TECRA S3 and OS support

  Welcome!

  I would like to share with you how not flexible is Toshiba Tecra S3. My problems:
  1. very low compatibility of utilities Toshiba for Windows 2003 - now don't save uilities which cannot install on Windows 2003 mobile extensions no brightness toshiba functions available.
  2. no software disk for Windows 2000 HARD shock protection.
  3. no software support email contact I can't write any complaints about drivers - only service supported hardware
  4.I supposed to serve this "business machine" portable machine in developing countries - but there is a pilot very low support for other platforms Windows than Windows XP. Laptops are not only office or media players text editors, but has power of desktop PC so please improve OS support in drivers Toshiba.
  5. manufacturers like Marvel or Intel support their chipsets for Windows 2003 with no problems.

  Hello

  Well, one of my friends has a Tecra S3 and he is very satisfied with this unit.
  As far as I know, this device was shipped with Windows XP and all the drivers are available for this device. Drivers Toshiba designed for common OS as W2k, XP.
  If you want to use specific tools and utilities, so you have to use this OS. It of a just done. Mobile computer technology is very different and delicate as a desktop PC. Of course, you can use another OS, but if you can't wait to use special tools.

  For example: mobile video graphics technology is not the same! It of very difficult to get the best graphics performance without high temperatures and overheating problems. In this case the graphics driver Toshiba has an overheating protection. NVIDIA or another s manufacturer drivers doesn t have that option because they designed the drivers for desktop PC not for laptops.

  Toshiba sells many different laptops with different hardware compatibility models. So if you are not able to find the drivers for this laptop, then you should try check the drivers for the other phones with the same hardware devices.

  PS: About Toshiba contact:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=00000000a2

  Concerning

• Tecra S3 - blue screen after first before installation

  I bought a new Tecra S3 and is the first time installation with recovery DVDs before installation and the system will reboot and crash blue screen first boot.

  I returned to the dealer and change an another Tecra S3 so same problem continues...

  I can't finish first installation... I think that the problem of raid driver. But the restore CD restore with ghost image.

  How can I install first?

  Erkan GOCEN

  Hello Erkan

  I have Tecra S3 for some time and I have preinstalled it twice (standard and expert mode) and in my case, it works without any problem.

  Trust me on this path is not easy to say what can be the problem, but I assume the recovery DVD is defective. You got two units with the same recovery media?

  Try to contact the after-sales Service of Toshiba partner in your country and to explain to them what is happening. They can order new media recovery for you and also to preinstall the unit. If this happens because of a recovery media you will get a free.

  Good bye

• Tecra A4 and Win7 - problems with PCMCIA card driver

  I've recently updated my old laptop Tecra A4 - PTA42E - (in great condition however) for Windows 7 and it is now in the best shape ever except for the PCMCIA card. In fact, to have Windows 7 installed I had to rename the pcmcia.sys and pcmcia.inf files during the installation (to .old or .bak) otherwise the new operating system would not start. The same problem has been experienced by many other users Tecra A4 and the solution is available in a number of forums.

  Although I use no more than the PCMCIA card slot, I want to fix this for a reason: If, in the future, I need to re - install Windows 7 for some reason any on this laptop, I have to repeat the same process - rename the pcmcia.sys and pcmcia.inf during installation, in addition, the new operating system does not start.

  I do not understand that the original drivers from the card slot (Texas Instruments PCI-xx21/xx11 CardBus Controller with UltraMedia) are not compatible with Windows 7, but it is there any updated driver that works for windows 7? And if there's a how can I replace the old drivers in my system so that in the event of re - install Windows 7 I will not have to go through the same process? TI site is no help, and Toshiba does not all drivers to download.

  Last but not least, if there is a driver available, I used the card slot for 2 ports USB 2 or 3 additional which are really necessary.

  Thanks to the forum, in advance

  Hello

  The pcmcia.sys and pcmcia.inf files are part of the Windows System.
  This driver isn't provided by laptop manufacturer, but it is a Microsoft internal driver.

  You mentioned that the pilots of the original card slot Texas Instruments PCI-xx21/xx11 CardBus Controller with UltraMedia) are not compatible with Windows 7.

  To my knowledge, this driver does control not the PCMCIA location but this driver controls the card reader that supports the MMC card, SD card, card xd picture card, SM card, Memory Stick and Memory Stick Pro.

  However, the Tecra A4 is very old model of laptop. The driver will not be updated for this camera and it looks like Windows 7 drivers never had to be released the driver Toshiba UE

• Tecra M9 and compitable motherboards

  Good day to all
  My Toshiba laptop Tecra M9 PTM91E - 12R features of a faulty video card.
  I replaced this card many times, but it's always get bad after a while.
  My repair shop of my recommended to replace its motherboard in order to get a solution permanent.

  I'm not sure if I am looking for motherboards Compitable with my product

  Can someone tell me please with PART NUMBERS of SPECIFICATIONS AND motherboards that I can buy?

  Thanks in advance for your support

  > Any can advise me please with PART NUMBERS, specifications AND motherboards that I can buy?
  Hmmmm... It is not as easy as you think. Defective parts will be exchanged on mobile units with only identical hardware components. It's a completely different situation than on desktop systems.

  You can visit the nearest Toshiba service provider and ask for help, but you will see that they will not be able to help you.
  Fact is that Tecra M9 was offered with two hardware platforms. PTM90E and your PTM91E.

  In the end, I must say it's really strange that you have an ongoing problem with GPU defective. When everything is changed on professional way and you take care of the machine and don't forget laptop is cooled properly I don t see the reason why it should be defective over and over again.

  For 3 years I have Tecra A11 and use almost every day for my small business and there is no problem at all. OK I use for typical every day activities such as web or MS Office and not for games or other graphics intensive applications.

  Try to contact Toshiba service provider in your country and ask for advice. They should have access to the material database of Toshiba and maybe they have good advice for you.

  If possible, send feedback.

• Difference between Tecra M10 and Tecra A10

  Dear forum
  The above says everything really.

  I see the two look identical, but one is smaller. These two models are different in other ways please.
  Ian

  Of course, the two laptops are different.
  There are different models Tecra A10 and there are different units Tecra M10.

  For example:
  Tecra * A10-13 b * supports Intel GM45 chipset and an Intel Core 2 Duo P8400 2.26 GHz CPU.

  Tecra * A10 - 1 2 * supports an Intel Core 2 Duo T9600 2.80 Ghz CPU Intel GM45 chipset

  You can find details of different laptop models left here:
  http://www.Toshiba.EU/discontinued-products/
  Then, you can compare all the pieces of hardware.

• Y at - it a lens which corresponds to Iphone 6 + with case and screen shield attached?

  Does anyone know of a lens wide angle for Iphone 6 + which allows that you keep the protector case and Iphone screen still in place? Most of those I've seen State the case and the shield cannot be still attached.

  Thank you

  As each case and screen protector can be a size and a different shape, I doubt there will be an iPhone lens that could correspond with them on.

• Portege R835-P88 - keyboard and screen replacement

  Hello!

  I own a R835-p88, which in US, I bought a year ago. Because I had a food spill last week on the laptop, now I need to replace the keyboard and screen. As I live in the UK, I would like to buy in the UK.

  My question is:
  TOSHIBA P000540040 KEYBOARDOEM for Portege R705 R830, R835 (UK) will be a replacement http://www.ebay.co.uk/itm/New-Toshiba-Portege-R830-UK-Original-Genuine-Keyboard-/110758413538?pt=UK_Computing_Laptop_Keyboards&hash = item19c9b744e2?

  Also for the LCD screen would be
  nels http://www.eBay.co.uk/ITM/New-A-13-3-Laptop-LCD-Screen-Display-for-Toshiba-Portege-R705-R830-R835-/321162565111?PT=UK_Computing_Laptop_Screens_LCD_Pa & hash = item4ac6c7d5f7
  It will be a match?

  Thank you!

  Parts for Portege R830 should be compatible with the R835 too.
  Usually, it's the same series but released in another region.

  The screen seems to be compatible with the Portege R705 and R830, R835 series.
  This is why it should be compatible with your model too.

• No sound with Tecra A9 and Windows 7

  Hello

  I just installed Windows 7 on my Tecra A9 and now: no sound. I ' v installed all the latest drivers but nothing to do: no sound.
  Does anyone have the same problem? And especially have solved?

  Thanks for your help.

  PS: The mute off the coast of the working tools doesn't work with Tecra A9 (is there an update?)

  Hello

  > I've tried the mute off tool, but it is not compatible with Tecra A9
  You need to install the VAP (Toshiba Value Package utility added) before using this tool!

  Check again!

• Tecra M9 and M10 wheel Volume does not not under Vista

  Hello

  I hope that someone can help me, I'm Vista using Microsoft Deployment Workbench deployment for Tecra M9 and M10 material and the volume knob will not work. I added the drivers of Toshiba in Deployment Workbench, while they are presented the machines via Plug n Play, volume button do not work. I also deleted the drivers of Deployment Workbench and installed the drivers manually on the machines, this installs fine, but volume knob will not work. I have two development servers, Win Server 2003 and Win Server 2008, the two do not run successfully the pilot slots.

  If I deploy a standard Win Vista Enterrprise 32 bit OS of DVD hardware, with any driver when it is installed, the volume wheel works. I can then manually install the audio driver and the volume button still works. But if I deploy the same exact DVD based OS of Deployment Workbench, the volume knob does not work?

  Any help would be greatly appreciated, as this is doing my head and holding up the deployment of the new image.

  Thank you
  Paul

  Maybe you are trying to install the driver Audio of M9 M10 or vice versa?

  You install the driver Chipset Intel and value-added package first? (this is important)

• Re: Tecra S10 and S11 freeze randomly

  We have several Tecra S10 and S11. Freezing randomly during the day. Some even twice within half an hour, others spread it throughout the day.

  The Tecra is all Windows 7. Some have 64 bit, others a 32-bit installation. After installation of Windows 7, we have removed additional software we don't need, like McAfee, Toshiba goodies (Assist, Tempro, etc.), Ebay, etc. After that we activatie Office 2007 and Microsoft put updated laptops. So far so good.

  However, after a week or two just work in Word causes the Tecra to freeze. Same ctrl + alt + delete does not work. The Tecra should be forced to turn off the power, press and hold the power button.

  Everyone recognizes these "frozen moments". It's very annoying.

  It is not easy to say why this is happening.
  Always it is that Office is preinstalled on almost all laptops Toshiba so I did not thing your laptops can be somewhat different.

  Maybe something else responsible for this?
  Maybe are all connected to your business LAN and there is a problem.
  Are connected external devices which can be responsible for this?
  Maybe some internal software of the company is blocking something.

  It is not easy to say what he can be.

  Have you done tests in the past to see what can be the problem?

• Why not remove images from my office window and screen saver?

  You have a thorny problem and a bit tricky here.

  A few months ago, at my work, I got a new iMac (for me). As I was getting started upward, furnished and ready to use, at some point it must be synchronized with my iPad, which was nearby. So, when I open my desktop and screen saver system preferences, I see a multitude of images that I took with my iPad and I somehow was stored and transferred to my work machine. One of these pictures is, shall we say, I don't like for anyone to see except my other significant... and it is possible that I can receive an offer for a new job at some point in the near future. Needless to say, I don't want to leave this pic on my machine here for someone else to run into.

  Problem is that I can't remove it. It won't let me select it; -button stays grayed out. The offensive peak is no longer on my iPad, but it remains obstinately to the view from my office window & screen saver system preferences. 1. Why can't select and remove? 2 in the world this image file actually location? I could trash it maybe, if I could find the actual file.

  To sum up, I want this pic from this machine, but I can't remove it now as it is. What can I do?

  

  Open the pictures folder in your user account and browse the library of Photos for the photo of the source and remove it.