Re: tecra ptm91e video problems turning on

Similar Questions

• New T5i with a video problem

  I received a new Canon T5i mailed the week last of Ritz camera.  At first, everything seemed splendid; It was an upgrade for me to an old XTi and I practice with this camera so that I can cover the launch of the NASA of the week with her next.

  This morning, so that the video shooting a problem suddenly appeared from nowhere.  Right in the middle of a video screen turned solid purple video recording and started to blink.  I stopped recording soon after but the screen continued showing this problem until I took the camera out of film mode.  At that point, I started the live view mode and everything was fine.  I went back to video mode and everything seems to be back to normal, but the problem looks like sensor failures I've seen with other devices in the past.

  It worries me a lot because I'm supposed to cover the launch of the Orion capsule week next as a guest to the event of social media from NASA.  The last thing I need is for the problem reappear in the middle of the launch.  I don't know why it happened, what it means or how to prevent it in the future.  The camera has not dropped or received damage that I know.  It was delivered to me and seemed to be in good condition when it happened, but now I fear that something may happen during shipping to cause an intermittent problem with the sensor or a loose connection.  Anyone here has any experience with this kind of failure and is there any fix for it?  Here is a link to the video containing the problem.  I have re-compressed it but otherwise it's totally unchanged:

  https://www.YouTube.com/watch?v=biGJ4ThmdJo

  Thanks in advance for any advice on this issue.

  Hey Astro!

  Welcome to the Canon Forum.

  I looked at the sample video you posted, and it is definitely not normal.  It can be the image sensor, but it can also be something wrong with the way the camera was recording video to the memory card.  I would try another card to see if it does not help.  If the problem persists, the unit must be repaired.

  To start the repair process, you need to fill out a service request on our Web site.

• Windows 7 64 - bit on Precision M6300 - video problem

  I just installed Windows 7 64-bit on a Dell Precision M6300. There is a video problem. Here's what's happening and what I tried:

  The problem:

  • If I move or resize a window, the colors go crazy and it becomes illegible or at best, barely readable.

  What I tried:

  • Installed the latest driver from the Dell support Web, for 64-bit Vista site. It has a little less well. With this driver, before even as I resize a window, something white in the window, for example the whole background of many windows, has a checkerboard pattern that makes it difficult to read window. Then that uninstalled driver and I am now is installed by Windows 7 64 bit.
  • Disabled the display of the device manager driver and found that in the video simple, low-resolution Windows going when you do this, the prob lem moved not. I was able to move and resize the dialog boxes here without problem.
  • With the Windows 7 driver, I tried all available including low video resolutions, I think it's the same resolution used when the driver is disabled. All had the same problem, including the lowest resolution.
  • Flashed the bios system A3 to A13, later.
  • Downloaded the latest Dell diagnostics, made a boot CD, entered the custom and ran all the tests video. All reported no errors, and I never saw no problem with the video then that in the diagnostic program. I was able to move the main window of the diagnostic program, and it worked fine; no problems of any sort there.
  • I also ran Express diagnostics; He reported that everything was fine.

  What should I do to fix this?

  Thank you

  Greg

  Hello Terry,

  No, I don't have success with the NVidia driver installed by Vista. I spoke too soon on that aforementioned; It turned out that after installation, he always used the "Standard VGA Grahics adapter" until it restarts. While using the NVidia driver installed by Vista and the problem was back.

  The only thing that worked was "Standard VGA Grahics adapter" driver for Windows, which is slow. If I deleted the NVidia driver from Device Manager and checked the box to uninstall it so that it has not restored automatically on reboot, the computer was usable, although that slow, until the next Windows Update automatica, who would always reinstall the NVidia driver, and the problem would be back again.

  Here is how I solved the problem:

  I solved the problem by getting an another Dell Precision M6300. It has no problem with the NVidia driver installed by Windows 7 and Vista. Probably, I will not try the Dell driver since it is about 3 years, while the NVidia driver installed by Windows was only around 3 months of age.

  I think it's clear now that there is a hardware problem with the first M6300. He returned to the eBay seller.

  By coincidence, the two laptops are from the same seller to eBay and the new its trackpad buttons were a bit sticky. With the agreement of the eBay seller, I swapped the palmrest assembled to get the best of these two laptops. He had a lot of screws to keep track of - 27 for each computer laptop - but not difficult. I was surprised to see how big the fans in the M6300 are compared with the Inspiron 8200 I used before.

  The 2nd M6300 works very well with the NVidia driver installed by Windows 7. I'll mark this thread as answered.

  Greg

• Angle of Rotation of the screen use + video problems

  Hi netpos,.

  Recently, I stumbled on the following problem with the video appearance on a portrait based on the Lcd screen.

  So, I ve set the DMP to rotate the screen 90 degrees to fit the current orientation of the LCD screen.

  Presentations that have images, swf are looking really good. But, if the presentation includes a video file, then the video file does not turn with the rest of the presentation but is presented in landscape orientation (such that it appears the LCD screen was mounted in landscape orientation).

  The current solution to do this is to modify (using the video editing) the video and turning at 90 degrees. Then everything seems ok.

  But, in doing so, the whole appearance of the video is reduced and also, time is lost as well!

  If anyone has encountered this before?

  Thanks to you all

  Hello

  
  

  What you describe works as expected.  The DMP will NOT alter the video.

  If the video is the film in 'landscape' or 'big' screen, the video will be played

  in the original mode, even if the display is shot in portrait mode.

  The video must be registered with mode\vertical portrait in mind.  If this is not

  the video will need to be changed via an application of part 3 to fit the dimensions of

  You vertical video object.

  
  

  If this answers your question, take the time to mark this

  discussion answered & rate the answer.

  
  

  Thank you!

  
  

  T.

• Video problems and a green screen

  Hello

  I read the questions and answers on this topic, but some things work and others do not.  For example, I was able to solve one of my problems with some other fixes I found through online forums General for the 'green' screen that plays with the audio only.  It seems to work for me on you tube but not on Facebook more videos alhtough Facebook worked the first time when I rebooted.

  What I did get into my internet options and under accelerated graphics that I checked use software rendering instead of...

  and on the Security tab, I checked activate 64-bit processes in increased protected...  It Enhanced protected mode should as well then?  Should I check this option.

  I also treid to do what the responses recommended... as a right click on the video on Facebook when he plays and then I get a pop up I get the settings options or global settings and adobe flash player info... by clicking on settings gives me options but none for "screen", only for my microphone, camera and storage.  If I click on global settings, need me to flash player help.  And the last option, I get my version of Adobe info, which is version 13.00.214.  So no option to uncheck the box disable accelerated graphics cause I think I already did this in Control Panel.

  But why is working with youtube and videos from Facebook that I also tried to play videos as wmv and other video files files in my windows media player flash and then I get a screen black but still audio not play now.

  My computer is a HP Pavilion Notebook PC and it came with Windows already installed 8.1.  My graphics card is a Radeon R5 AMD graphics card.

  So what the devil now.  Should I install more recent Adode Player?  Even by unchecking the option graphis accelerated, this isn't really a solution for the deeper problem and the question, because then it slows down your graphics card?

  My computer is not even a week and I hate having to always download the patches and constant updates and spend hours searching for and trying to solve a problem that really should not appear in a first time.  Why are there so many problems with Windows?  Is this a problem with windows updates as well.  Active X controls?  Isuses of compatibility with 64-bit processes.  Can I use Firefox.  I did with my old HP, which finally launched the bucket and that's why I had to buy a new one.  I had to replace my battery before a year and my warranty battery lasted that long either and then the thing finally overheated and died.  But I had a lot of similar things happen before with the last HP laptop if it's Windows or is it HP or is it browsers, readers?

  I'm sorry if I'm unloading on you... I want too much, but it's so frustrating as a consumer of always having to go through such things.  I use my laptop to work on his own account so please help!

  Thanks for letting me vent...  I'd appreciate your help, thank you.

  A frustrated customer

  Thank you for visiting the Forums HP's Support and welcome. I'm sorry you're having problems.  I looked into your problem with video problems.

  You have uninstalled Internet Explorer?

  Have you tried Google Chrome?

  It already includes Adobe® Flash® Player built-in. Google Chrome automatically updates when new versions of Flash Player are available. Adobe are on version 15. Here'sa place to update. It has a link to Google Chrome as well.

  Here is a link to common problems of Flashplayer.

  I would try a system restore because this could undo any change that could happen with an update from Microsoft. Sometimes they have not completed or installed on the laptop.

  Hope this helps you.

  Thank you.

• URGENT... Driver video problem Check

  140105 URGENT...  Driver video problem Check
   
  (will take other ideas on what to do for video problem)
  performance of device drivers fix security
   
  my video seems to be a xp machine.
  When restoring from my pc to an earlier date, it seemed to alleviate the problem.
  When I boot in safe mode, I have a video perfect (with the exception of the size of the objects).
  When I reboot, screens of washing washing & microsoft come up, when get to xp blue light / logon screen it goes black.

  What is this 'supposed' to have a problem with?
   
  is there a way to get a proper driver download?
  and: is there a utility to repair the files without destroying the data...
  Thank you

  have: windows xp3 sp3, viewsonic va800 monitor

  I went to the site of the Lim.  think that was part of the problem with saw to no support.  sent them an email / current.

  check microsoft to the drivers FRO viewsonic va800, except if someone can help with a good method of downloading drivers before hand.

  Hi Dave,.
  I could be wrong, but "Viewsonic va800" resembles a monitor?  I think that you need to update the drivers for your graphics card.  In Device Manager, look at "Graphics cards" (that's what they are called in Windows7, could be something different in xp...).

  Take a look at this site for more information: http://pcsupport.about.com/od/fixtheproblem/ht/updatedriverxp.htm

  Because every PC is different (a different material) you're not going to find specific instructions, I'm afraid).

  Hope that helps.
  See you soon
  Rich

• I can't get my Age of Empires III run on my laptop Inspiron 1525, something about video problems? Help!

  When I loaded my new Age of Empires III game on my computer that he would not go because of video problems on my taptop. I don't quite understand.

  Something about Direct3D and maybe not enough memory? Help!!!!!!!!!!!!!!!!!

  Hi John CMcClain,.

  1. did you of recent changes on the computer?

  2. What is the exact error message that you receive?

  See the articles below and check if it helps.

  DirectDraw or Direct3D option is unavailable

  http://support.Microsoft.com/kb/191660

  Troubleshoot display with Microsoft games

  http://support.Microsoft.com/kb/263039

  Error messages when you start a Microsoft game: "Signal out of range" or "out of range scan.

  http://support.Microsoft.com/kb/315614

• A Windows Update which included a NVIDIA driver's day, now of video problems

  A few days ago, I installed a driver NVIDIA update in the updates of windows.  Since then, I have had problems with the video screen goes blank.  Whenever I was forced to do a power cycle to recover. Several times.  After awhile, I had to reinstall Windows 7, no surprise.  But, even after this reinstall I still see video problems.  I used this machine for 8 years and never had a problem before this video.  Never.  It is a new problem that came with the installation of the update of the driver.  It seems that the NVIDIA installation has changed something that Windows 7 reinstall couldn't fix!  Looks like something in the video card or the BIOS.

  I expect that any change in the inner workings of windows, including that the registry would be more written by Windows 7 reinstall.  This is a full installation.  Not a repair.  I tried a repair, but didn't work, so a complete installation.

  The update of the included NVIDIA driver NVIDIA console could be appearing in the Panel.  This console configures the driver settings, without going through the windows interface.   What did do?  May have changed the firmware on the card?  May have changed the NIC of the OS?  Maybe something changed in the BIOS.  That was the case, the change persisted after reinstallation of Windows 7.  Yesterday, to installed the provided Comcast Norton security suite.  After the death of the first installation of the video.  I did an uninstall/reinstall and it seems ok at the moment.  Never had this problem before.  Initially, this machine has Windows XP and has been updated to Windows 7.  On both versions of the OS, I have installed security software and never no problem.  Not until this update of NVIDIA driver has been installed with the console software.

  I have really no need for their new console super driver.  I'm not a player, just need to get my system back to a reliable State.

  While searching for a solution on the internet, I'm a LOT see people with this problem.  It seems that this has been a matter of months.  Since I have this problem while performing a Microsoft provided update, Microsoft must weigh on this and get NVIDIA to present a real difficulty.

  After having the same DELL machine for 8 years, I thought to be updated to a mini pc.   A shoe more small print on my desk.  But I'm very concerned about getting a machine with NVIDIA graphics.  Also, I now seem that one cannot assume the updates from Microsoft to be sure.

  Of course, this seems to be a driver problem.  I don't know if the NVidia updates change firmware on the card.

  If this computer is a variety of funds, and I presume that it is or it would not still be alive after 8 years, your best solution will be to go to the computer store and buy a low range graphics card that will fit in your PC.  Probable cost is less than $50.  Only problem is you need to know what type of video slot machine MB of your computer has.  The video card must adapt it.

  If you tell us the brand / model of the PC, we are able to provide more help.

  I should add that my PC is about 6 years old and has a NVidia video card.  I made the mistake of getting a new NVidia driver also.  He made a number of problems.  Finally, I solved it by uninstalling and removing all components of NVidia.  Then by restarting.  I remember not but either Windows installed the right driver or it has been updated for Windows installed.  No problem since.

  nVidia is not really interested in visitors like us.  Their focus is on the players.  Accordingly, users like we end up with a software that is very different from what we actually need.

• Why don't my rotated video frame turn also?

  I checked these forums and followed the method to rotate a video that turned out be rotated 90 degrees. When I turned the video he shot all right, but the image is always vertical portrait and not to turn too. What I end up with is a high vertical frame that has a well shot video that has both ends trimmed. All the other videos I now add to the timeline are also within this framework high and also cropped because the frame is high and narrow, turn only not with the image.

  How can I do it correctly? Is it is possible to simply rotate a video that has turned on its side and have the format or the frame to turn too?

  TIA, Ken

  It never ceases to amaze me the odd hours involving the personal loyal Adobe. Look at the time stamp on the post of Mark.

  To be more precise, just in case other people with the same issue, first create the sequence of your clip. That will prevent the right size and shape and frames per second to correspond with your video.

  You can do this by dragging the element towards the "New item" button or simply right-click on the item in the project Panel and select "new sequence of the Clip.

  Once you have the perfect just sequence change this:

  

  To do this:

  

  Then, you can use the motion effect on the clip to rotate 90 degrees (or - 90 degrees).

  Unfortunately, you can not, as far as I know, turn the clips in the project Panel. Only in the sequence. A possible solution so it is based on the clips and your flow of work, is to put all the clips on the timeline, turn them while turning one and copy the attributes of others at the same time. You can then take this sequence in the Source monitor Panel and use it as a clip. This is one of the great things about nested clips. From here you can cut into smaller clips if you wish. It doesn't seem to be possible to create real subitems of a sequence, but you can mark the entry points and drag them in the project Panel, and then rename them if you wish.

  Some of my friends here on the forum seem to hate the concept of video shooting in portrait mode on a phone or a video camera. However, there are moments where it makes perfect sense to me. Especially when it will be displayed on a monitor that is oriented in portrait mode. A lot of advertising in this way. And who says that the video on a website must be the landscape? Why you'd shoot the Eiffel Tower of the new Freedom Tower mode landscape?

  If you are shooting video of a person standing and speak to put on the side of a web page, the picture is more logical.

  In any case, I hope this helps.

• World of Warcraft on Tecra M5 with Nvidia video problem

  Hello

  I own a laptop very well supported - Toshiba Tecra M5 with the following specifications

  Processor: Intel Centrino Duo - T2600 @ 2.16 GHz and 2.16 GHz
  RAM: 4 GB
  Video: Nvidia Quadro NVS 110M
  OS: Windows Vista Ultimate 32-bit (on the highest performance with all the eye candy settings disabled)

  The phone plays very well, but when I try to play world of Warcraft I encounter problems in the screenshots below

  http://www.exeedstudios.com/temporary/WoWScrnShot_051809_075336.jpg
  http://www.exeedstudios.com/temporary/WoWScrnShot_051809_075634.jpg

  I tried playing with the drivers on the Toshiba site (dating back to 2007) and I also tried the latest version of the driver directly from nVidia but no change in performance

  Running the game in opengl mode makes things worse.
  Sometimes, glitches video will change the above to the following

  http://www.exeedstudios.com/temporary/WoWScrnShot_051809_090648.jpg

  In the world of Warcraft Support Forum I was told to contact the manufacturer of the video card may be defective.

  Thanks in advance for your help.

  Hello!

  It seems that your graphics card is broken...
  You have this problem on other games also or only with World of Warcraft?

  But it could also be an overheating problem. Have you tried to clean the laptop using a jet of compressed air? This could blow out the dust from the cooling fans.

  In the worst cases, you should contact an ASP. Technicians can check your laptop and share the graphics card if it of necessary.

  Good bye

• File download video problem

  When I used to click on links to before mp4 files, a popup would show by asking what I want to do with it. now, he opens a new tab and begins playback of video file. I have not added the new plug-ins, but I think that there was an update to Firefox. I was wondering how I can solve this problem. THX!

  Yes, it is a new feature on Windows. If you want to prevent Firefox to play natively MP4s, which basically turn Firefox to the previous behavior, you can pass a parameter under the covers.*

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste the media and make a pause so that the list is filtered

  (3) double-click on media.windows - media - foundation.enabled to change its value from true to false. Not sure if it takes effect immediately when you reload the tab than you or you need to restart Firefox before it takes effect.

  * Technically, this setting controls the use of the code provided by Microsoft for H.264 decoding. MP4s using another form of coding can still play after having reversed this setting.

• Re: My Tecra M2 won't turn on

  My Tecra M2 lights.

  The power light is on.

  When you press power button the power led turns off then back.

  Nothing else

  Hello

  Eventually he s a RAM problem.
  Remove one of the RAM modules and check if you could power the unit using only one of the RAMs.
  Check the two modules!

  Good luck

• Tecra M2 - monitor problems

  You just bought a Tecra M2 three days ago. When I turn on it almost every time is delivered with the message, the program Nvidia? could not be closed. Whem twice I turned on the pc, the monitor has been with strikes. Who is wrong?

  Hello

  If your laptop is all new contact Service partner and they can check what is the problem with your monitor. Normally avoid any strike.

• Tecra M2, sound problems

  I can't get any sound on my tecra m2 at the present time. Its been like that for a few days. The volume is not cut or something like that and I can not see what is the problem, can anyone help?

  Have you tried to turn the Volume control on the front of the Machine?

  Good bye

• Tecra M4 - battery problem

  Hello

  My Tecra M4 battery appears to discharge on his tours off the coast. If I charge it to 100%, then unplug it and don't use it for about a week when I come to turn it on it used and I need to connect to the mains. When he dose get Windows reports 0%. It seems to lose about 15-20% per day of power turns off.

  Anyone know if this is normal for this model of if there is probably a problem that I have to look at the dose.

  Thank you

  David

  Hello

  This is definitely not normal. I think you need a new battery. That this be enabled by service. You still have warranty, so it will be free.

  Good bye