Read head must be parked on the last or first frame between plans.

Similar Questions

• NetBook XP, start-up stalls, must close and load the last well-known configni, no virus on check, no file of 0 k on check

  NetBook XP, start-up stalls, must close and load the last well-known configni, no virus on check, no file of 0 k on check.  Help!

  Hi Matthew,

  This is mcafee.  I uninstalled and reinstalled and now it works perfectly.  Thanks a lot for your help.  HPK

• When I burn CD for my use on the computer, sometimes the order of the songs are returned, starting with the last song first.

  * Original title: Windows Media player

  When I burn CD for my use on the computer, sometimes the order of the songs are returned, starting with the last song first.  This is the CD, or I do something wrong?  This isn't an ongoing problem... most of the time it's ok.  Can I change the order manually. If Yes, where and how.

  Thank you

  Lee

  Lee - there are a number of possibilities. First of all, it depends whether you burn audio disks or data - if they are audio discs, you can check and rearrange the order of songs in the burn list - if necessary - before you start burning. If you drag multiple files to the burn list quite often the last track you clicked on will go upward, so I wonder if it is what can happen. Back with a little more detail if I not quite correctly interpreted the problem. Best regards, Ric.

• "Reader" in Windows 8 - always keeps the last number of copies when asked to print

  Hi, my colleague is running Windows 8 on a Dell desktop computer, when she displays a file in 'Reader' and enters a number of copies to print, any file she looks after this and then try to print then remembers also the number of copies - it is not default to 1 copy.  Any help appreciated.

  Hello

  Thanks for posting your query in Microsoft Community.

  • The problem is specific to printing using Reader app?

  I understand that the layout print Reader app don't no default 1 and I will be happy to answer your query.

  I suggest that you manually change the parameter 1 and take print of all thinking to test. After printing of any document, close the Reader app and then check if the print setting change to 1 because you closed the app with 1. If the setting print page does not change, you can try following steps and check.

  Step 1: Put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Step 2: Run Microsoft Safety Scanner

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Microsoft safety scanner

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  From now on, try the methods above and let us know the update.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• I select "reverse" and the printer still prints on page 1; How to print the last etc., first page

  I select 'inverse', so the printer starts to print on the last page and ends the first and it still prints page 1, leaving me to CPlacez pages in the order manually.  How to do this.  My last HP had no problem;  I have a 6100

  Please try this:

  1. Enter the control panel > devices and printers.
  2. Right-click the printer icon, click Printing Preferences.
  3. Select the Advanced tab.
  4. Set the order of the Pages as back and forth.

  Additioanlly, check the same setting applies to the program you use as custom preferences can be kept for a specific program:

  Open the file that you want to print, the click file > print.

  Click Preferences, and then check the order of the pages defined as Front-to-Back.

• Error message 404 in the last Calc Manager and Hyperion Planning Logins

  Hi all
  
  When I tried to log into the Manager of Calc and Hyperion Planning (V.11.1.2.2) through the web URL, I get the 404 Error Messages.
  
  If I can get to Calc Manager via the workspace, but when I tried to access Hyperion Planning its launch an Error Msg: required Hyperion Planning.Application Wizard creating applications Module is not configured.
  
  I don't have the Installation/Configuration error.
  
  Any help on this is appreciated.
  
  
  
  
  Thank you
  Mike.

  OK last time :) will check you the newspapers for example \user_projects\\diagnostics\logs\ check the logs in the directory of services for windows and the startup directory for * nix

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Adobe Reader 11 will not return to the last page you read, but because of version 10

  Hello

  I just installed Adobe Reader version 11. When I start to read a pdf file, it will not start on the page where I left off last.

  I had version 10, and he would start on the page where I finally left (at the previous session).

  Is there a way to get version 11 to do what would make my version 10?

  For example, if I studied my Excel book and left to page 70, closed Adobe Reader, then recovery thereafter, Adobe Reader automatically start on page 70 (for the Excel book that I study since).

  However, now with Adobe Reader version 11, it does begin at the front of the book pdf.

  Is there a way to get version 11 to remember the page whatsoever when I close the book pdf?

  Thank you very much

  Edit > Preferences > Documents > open settings, select 'Restore last view settings... ". »

• How the first column heading must be repeated if the table breaks across pages

  Hi Experts,

  RTF model, header row in the table automatically repeat if record go to the next page. in similar fasion, I want to repeat the first column heading, table breaks on any page.

  Please help reslove this issue...

  Hello

  You can add the tag to the first column and the first row of the table. It will repeat 1st column when table to break across pages.

  Here 1 means, repeat first column when table to break across pages.

  I hope this will solve your problem.

  P.S. If you provide 2, this means, repeat for column 2 of the table through the pages

  Please check the issue as resolved, if that answers your question. Thank you

• After the last update first CC crashes at launch

  Hello

  as soon as I updated first CC on my Mac, it now hangs at the launch.

  And I pay for an app that does not work.

  Any idea?

  Thank you

  The correct answer is that there is a CUDA driver in Mac library. I removed it and now it works

• Why don't the read head align a mount point in the Timeline?

  As a recent first user from Final Cut, there is a behavior in the first I can't get used to. When I drag the playhead autour while in the scenario, I would expect the playback head to align the ends of the clips, edit the points, but it doesn't. The reason is important behavior is because it's often that I want to do something between two change points (or end of a clip that may not be the last clip on the timeline) such as insert a clip or other asset items. In FCP, drag the cursor around the read head, it will jump to the various edit points, making Park the playhead at a given place, I will insert a clip. With the first, I can get the head of close reading, but it will not snap, so I never know if I'm on the exact frame I want. This means that I could easily miss the end of a clip by one or two images, and you never know.

  Is there a way to force a wink? or change a setting to allow the read head hanging? Of course, I also want to temporarily disable this behavior by a combination of keys, which I suppose is easy to do using the combination of keys toggle 'snap' current (S).

  When you use the mouse and near a point edit hold SHIFT, it will jump to the edit point.

• Why won t the last reader to read the form?

  Why won t read this registration form WILL, ((( https://www.1010ez.med.va.gov/sec/vha/1010ez/Form/1010ez.pdf ))) site WILL continues to tell me that my read ADOBE is obsolete, and I the last installed?

  In fact, I have to disagree with Colin Holgate. The file seems file. It's a very clever and very complicated form.

  The problem is, and you are one (or two) countless who touched it: it is not enough to have installed the Adobe Reader. You must also USE it.

  This message is typical, if you use a browser that reads PDF files without using the Adobe Reader software. Most browsers now cela, then save the PDF file on your computer and open in Adobe Reader (Acrobat Reader) from there.

• What is the last downloadable version for Adobe Reader, 11.0.08 or 11.0.09?

  What is the last downloadable version for Adobe Reader, 11.0.08 or 11.0.09?  I saw the 11.0.09 download last Friday 18 September 14 but is no longer seeing her today 22/09/14, just the 11.0.08.  In addition, after I downloaded and expanded AdbeRdr11008_en_US.exe, I'm AcroReader.msi that's posted date 23/09/2012.  I need to customize the MSI file by using the wizard XI of Adobe Customization for our business environment.  Can you direct me on where to download the last file MSI for Adobe Reader?  Thank you.

  The last MSI made available by Adobe is AdbeRdr11000_en_US.msi

  You can get the 11.0.09 http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.09/en_US/AdbeRdr11009_en_US.exe EXE

• Cannot print continue on all pages except the last page in the xml editor

  I designed a model that prints continues on all pages except the last page in my xml report. Currently, it works very well when the report has two continuous pages prints the first page and last page prints my footer which is exactly my requirement. But if the release of the report is more that continue to two pages, that prints the first page and last page prints my footer but in the pages of the Middle continue is not printed
  
  Can someone help me with this problem. Its urgent
  
  Thank you

  Neednt have you checked.
  If you have inserted a front section break , and then click the new section and remove "link to the previous.

  This will ensure that you will have the same header/foot in all but the last page.

  See the user guide
  http://download.Oracle.com/docs/CD/E10415_01/doc/bi.1013/e12187/T421739T481157.htm#4535357

• Add a different character to the last line of a loop

  Hello
  
  I'm trying to use some pl/sql to generate a copy of RMAN script. After each line must be comma, but the last line of the loop should have a semicolon to complete the statement. How can I do?
  
  In the example below, the copy for controlfile 3 should be a semicolon, not a comma:
  
  run
  {
  SHUTDOWN IMMEDIATE
  STARTUP MOUNT
  COPY
  DATAFILE 1 to ' / u20/oraflash/ORCL1/dbcopy/system01.dbf',
  DATAFILE 2 to ' / u20/oraflash/ORCL1/dbcopy/undotbs01.dbf',
  DATAFILE 3 to ' / u20/oraflash/ORCL1/dbcopy/drsys01.dbf',
  4. FOR DATAFILE ' / u20/oraflash/ORCL1/dbcopy/example01.dbf',
  5. FOR DATAFILE ' / u20/oraflash/ORCL1/dbcopy/indx01.dbf',
  DATAFILE 6 to ' / u20/oraflash/ORCL1/dbcopy/tools01.dbf',
  DATAFILE 7 to ' / u20/oraflash/ORCL1/dbcopy/users01.dbf',
  DATAFILE 8 to ' / u20/oraflash/ORCL1/dbcopy/xdb01.dbf',
  CONTROLFILE CURRENT FOR ' / u20/oraflash/ORCL1/dbcopy/control01.ctl',
  CONTROLFILE CURRENT FOR ' / u20/oraflash/ORCL1/dbcopy/control02.ctl',
  CONTROLFILE CURRENT FOR ' / u20/oraflash/ORCL1/dbcopy/control03.ctl',
  *;*
  ALTER DATABASE OPEN
  }
  
  My script is:
  
  Set serveroutput on encapsulated format
  Set feedback off
  
  coil db_copy.rcv
  
  declare
  cursor df is
  Select
  file No.,
  substr(Name,29,50) name
  Of
  v$ datafile;
  CF cursor is
  Select
  substr(Name,27,50) name
  Of
  v$ controlfile;
  BEGIN
  DBMS_OUTPUT. ENABLE (2000);
  DBMS_OUTPUT. Put_line ('run');
  DBMS_OUTPUT. PUT_LINE('{');
  DBMS_OUTPUT. PUT_LINE (' ' STOP IMMEDIATELY ');
  DBMS_OUTPUT. PUT_LINE ('STARTUP MOUNT');
  DBMS_OUTPUT. PUT_LINE ('COPY');
  for dfbkup in the loop of the df
  dbms_output.put_line (' DATAFILE ' | dfbkup.file #|)
  ' TO ''' || ' / u20/oraflash/ORCL1/dbcopy /' | dfbkup.name | " «, ») ;
  end loop;
  for cfbkup looping CF
  dbms_output.put_line (' CURRENT CONTROLFILE ' |)
  ' TO ''' || ' / u20/oraflash/ORCL1/dbcopy /' | cfbkup.name | " «, ») ;
  end loop;
  DBMS_OUTPUT. PUT_LINE (';');
  DBMS_OUTPUT. PUT_LINE ("ALTER DATABASE OPEN");
  DBMS_OUTPUT. PUT_LINE('}');
  end;
  /
  
  spool off

  Use a combination of dbms_output.put and dbms_output.put_line. PUT puts data into the buffer, but is not out then PUT_LINE adds data to the buffer and exits.

  firsttime := true;
  for cfbkup in cf
  loop
    if not firsttime
    then
      dbms_output.put_line(',');
    end if;
    dbms_output.put(' CURRENT CONTROLFILE' || ' TO ''' || '/u20/oraflash/ORCL1/dbcopy/' || cfbkup.name );
    firsttime := false;
  end loop;
  dbms_output.put_line(';');
  

• Programming logic needed to retrieve the records for the last month/week

  Hi all
  
  I need assistance in programming SQL logic.
  
  Oracle database version: 10.2.0.3.0
  
  Requirement
  
  In an environment of DW, I need to program to weekly and monthly automated batch insert the data from Data_tbl to Reporting_tbl to generate reports. Descriptions of paintings are given below.
  
  Table 1 - Data_tbl (Source of table - this table is updated daily).
  
  Record_dt first name last name
  
  
  Table 2 - Reporting_tbl_ (the target table)
  
  Cycle_dt first name last name
  
  1. monthly report
  
  In the SQL query, I where clause conditions.
  
  Where Record_dt > = 1 November 08 ' and record_dt < = 30 November 08 '
  
  Using the above condition in development, I'm pulling over the last months data source table data. This will be repeated every month, and it should be automated.
  that is, if I run this report at any time in December 2008, he should choose documents dates from Nov 01 to November 30, 2008. If I run this report at any time in January 2009, he should choose documents dates to Dec. 01 to December 31, 2008.
  Date values must be assigned for the last month. Value of Cycle_dt in the target table must be the date of the end of last month as on November 30, 2008, 31-dec-2008.
  
  
  2 weekly Report
  
  In the SQL query, I where clause conditions.
  
  Where Record_dt > ='01-dec-08' and record_dt < ='' 07-dec-08
  
  Monday week start date and end date is Sunday.
  If I run the report between the 08 Dec-14 Dec, it should make records of the dates of Dec. 01 to December 7, 2008.
  On 15 December, he should seek from 08 Dec-14 Dec.
  Value of Cycle_dt in the target table must be the date of last weekend, as on December 7, 2008, December 14, 2008.
  Please help me with the logic for both monthly and weekly reports.
  
  Thank you

  Hello

  TRUNC (dt, 'W') is the beginning of the week, which may be different days, according to the NLS parameters in your session. Unless you want something that varies from one session to the next, you should stick with the weeks of ISO.

  TRUNC (SYSDATE + 1, 'IW') - 1
  

  is the Sunday of the week underway Sunday to Saturday, which starts and ends in 1 day before the ISO week.
  To find the precedent of the week from Sunday to Saturday:

  WHERE   record_dt >= TRUNC (SYSDATE - 6, 'IW') - 1
  AND     record_dt <  TRUNC (SYSDATE + 1, 'IW') - 1
  

  If you were interested in a week from Saturday to Friday (either 2 days earlier than the ISO week):

  TRUNC (SYSDATE + 2, 'IW') - 2