Read-only resets, Highlighted and unaudited

Similar Questions

• I could only underline, highlight, and etc. the text, but do not copy it to the ipad. How to copy a text in Adobe Acrobat in ipad?

  I could only underline, highlight, and etc. the text, but do not copy it to the ipad. How to copy a text in Adobe Acrobat in ipad?

  Hello

  When you select text in a PDF document, the menu appears.

  

  You can change the selection of text by dragging the blue "grabber" horizontally (left or right) and press to copy in the menu to copy the selected text.

  I hope this helps.

• How to stop Win7 public files read-only reset?

  I use a 2 PC Win7 SOHO network and 1 WinXi PC.  whenever I have reset all files in the Public directory to "read/write by everyone", Wind 7 resets read-only.  In addition, although ' I'm the only user, he always tells me that I need to "contact my administrator" for open/save/delete etc files.

  Hello

  According to the description of the problem, I understand that whenever you reset all files in the Public directory to "read/write by all the world", Windows 7 resets read-only and you get a message stating 'contact admin' for open/save/delete etc files. I understand the inconvenience.

  (1) if it works much earlier?

  (2) exactly how you are trying to share files on the network?

  (3) is the specific issue of Windows 7 computers?

  I suggest you to refer to the following articles and check if it helps to solve the problem.

  Method 1: File sharing essentials

  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

   

  Method 2: Share files with someone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

   

  Reference:--

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

   

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

   

• Cannot modify read-only profile settings and Firefox will not organize.

  can access my profile properties. Uncheck the read-only, apply and save. Read and open the properties only is checked.

  The profiles.ini file created or updated correctly to indicate the location of the profile?

  • http://KB.mozillazine.org/profiles.ini_file

  This error message you get (if any) when you try to start Firefox?

• New folders and briefcasesall my folder are locked on read-only I uncheck and hit appl and ok but it stays still on no read.

  all my files are locked on read that I unchecked it and click on apply and ok but it still remains on read-only. I t doesn't turn off read-only. S o I can not update all the files.

  Hello

  · You are the administrator of the computer?

  · Do you remember any changes made on the computer before the show?

  Try the steps listed in the links below and check, if it would help: you cannot view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7: http://support.microsoft.com/kb/326549

  How to set, view, change, or remove special permissions for files and folders in Windows XP: http://support.microsoft.com/kb/308419

• Keep records for read-only reset

  I uploaded a few photos from my iPhone using the cloud and kept that find whatever program I opened in, the computer would not save changes as it said that the file or folder is read-only.  I checked the file by clicking on properties and ensure that the read-only box has been disabled.  Then, I checked the file do the same thing and found that the folder itself has been set to ReadOnly.  I then unchecked that hit 'apply' and then returned to the folder for editing photos, but it's the same thing.  Then, I went to the propeorties folder and found he had turned to read-only.  I thought that reading only may be applied to a higher level, namely my pictures or My Documents, which he was, if I disabled and it is simply coming back again!  I was wondering if there was a way to fix this or if there is a higher level than I can uncheck the read only options for if that's what is behind each photo be read-only.

  No. I thought maybe iCloud still had the file to open.

  You can check the permissions to make sure that you have write access to the files.

  I would like to use Process Monitor to get more information about what exactly is happenning. But this produced a lot of data and needs a degree of knowledge of the functioning of WIndows.

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645

  If you decide to try this, there is an introduction to use it here:

  Windows Sysinternals Primer: Process Explorer, Process Monitor and more. Tech· Ed 2010 North America | Channel 9

• InDesign CS6 link opens read-only - cannot edit and save

  I have an an ID document nested in another document and every time I try to change the parent document alone open read-only. Also, if I try to save it I get:

  "Unable to save the document. It can be opened by other applications. Close other applications and try again. Alternatively, you can use Save as to save it in a new document. »

  If I try and open the nested file separately after this he also open in read-only and returns the same error when I try to save. Even when I close all other documents CS6 first. I need to quit Indesign and restart in order to open the file and save normally.

  It seems to be locked by ID, but the properties of the file in Explorer show unalterable as disabled. But he is stuck in the system too because I can't open it from Explorer.

  I tried to export the indd files parent and child to idml and then saved as new files indd and relinked them but they always make the same behavior in ID.

  It's very frustrating because I can't change the original of ID, and if I accidentally do, ID breaks the file (being locked, unalterable and unrecoverable) so I need to record in as long as something different, leave ID, rename it and start over.

  Windows 7 x 64 Indesign CS6

  Found the culprit! Extensis Suitcase Fusion Plugin ver 15.0.3.479. Had to disable the plugin, unfortunately not longer automatic font substitution!

• read only channel number and the number

  I have "COM4" of my I/O.  How could read number 4 only?

  Thank you

  Like the picture as an attachment you can try 'n' in various ways

• How can I convert an incoming call read only an attachment so I can change it?

  How can I convert an incoming call reads only attachment so that I can change it? Save in Word does not it, and find research peut t.

  So, the problem seems to be that attachments are stored as files read-only by Thunderbird and an application it can open without editing privileges, so you cannot change the. Read-only mode was chosen because these files are kept in a temporary location. For example, if you modify and save the back, they are deleted when Thunderbird is closed, so losing your changes. The idea is to force to save you to a different location. You should be able to do it, then open it from that location with full editing capabilities.

  For a permanent change in this behavior, go in the [tools >] Options > advanced > general tab and click on Config Editor there. After you confirm the warning, copy - paste browser.helperApps.deleteTempFileOnExit into the search bar and switch false to true by double clicking on it. Now, saved attachments are created with read/write permissions, but is more removed when Thunderbird is closed (i.e., stored in % AppData%\Local\Temp).

• Why my computer continues to change the file read-only after I have untick

  I just had a Virus go through my computer and I cleaned it, then my computer shows I lost all my information, but I know that I have not because I still programs and background even though I've been there and opened a few folders to see if the files are hidden it turns out they were, but the box that says hide has not been verified , so I corrected the hidden problem but now the computer keeps the read-only check box and everytime I try to uncheck once I apply then click ok, it re check it self and I don't really know how to fix this... Please help

  Hi Cameron_513,

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Diagnose and repair Windows files and folders problems automatically
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: follow the steps described in the article below to restore the security settings and then check if it makes a difference.

  How to restore the security settings to a known working state?

  http://support.Microsoft.com/kb/313222

  Method 3: Run Microsoft Security scanner (MSS) to remove the infections of vestige of the computer

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: Infected files can be deleted from your computer; There is a chance of data loss.

• Cannot save a document when crossing the line through Deltech, it says read-only, how can I change this?

  My daughter has a test under deltech, when she goes to save him, it says read-only.  What should I do to fix this?

  Hello

  I suggest you follow the steps that can help you solve your problem below:

  1. Find the file you want to edit.

  2. Right click on the file and then click Properties.

  3. Click the general tab, clear the read-only check box, and then click OK.

  4. Edit and save your file as needed.

  If this does not work, contact Deltech.

• Read-only text box.

  I'm on the APEX 4.1.1.00.23. I'm doing a read-only text box. It works but the to-go box and put it on a single line. It doesn't look very good. I changed the screen for the item to display only and it does the same thing. Are there

  in any case, we can change the read-only text box and not take the box or formatting?

  Thank you

  PAM

  PAM wrote:

  I'm on the APEX 4.1.1.00.23. I'm doing a read-only text box. It works but the to-go box and put it on a single line. It doesn't look very good. I changed the screen for the item to display only and it does the same thing. Are there

  in any case, we can change the read-only text box and not take the box or formatting?

  Make read-only conditionally temporarily or permanently?

  In the first case, use a textarea element with the readonly attribute of the element instead of the built-in read-only properties. Set the HTML attributes of the element form item to the text box to:

  readonly="readonly"

  If it must be made conditional or temporary, explain the requirement in detail.

• Conditional read only the rows in a table

  We have a requirement only under a certain condition (which may change each line), a line can be read only or editable and are uncertain how to implement this with APEX

  for example, lets say a table has the following features

  columns: ID, Date, editable

  1, September 12, 2015, Y

  2, September 15, 2015, Y

  3, 18 September 2015, N

  4, 19 September 2015, N

  5, 22 September 2015, Y

  Thus, when this data displays on a page in a tabular presentation, the date ONLY are editable for lines 1, 2 and 5. For lines 3 and 4, the date cannot be changed

  In the ADF, we get this by setting the attribute readonly on the date component to "row.bindings.Editable.inputValue =='N" ""-this would be evaluated by line and switch read only one or off for each date listed in the table.

  Help, pointers would be greatly appreciated!

  See you soon,.

  Brent

  Here is a link to a starting point: dynamic Action on a tabular presentation. Jeff Kemp on Oracle it shows how to condition the unalterable columns.  The same logic would apply only to a line level...

  Thank you

  Tony Miller
  Los Alamos, NM

• Read only view object replaces all of my attributes transitional when I change it

  We have a read only view object that is a large query that calls a stored procedure.   If I change the query and simply add a space character and save it, all the attributes change to be transitional and it completely breaks the view object.   The query uses an alias for each of the selected values, and I was able to replicate this with the simple query stand alone below.

  SELECT "Value1" as requestId,

  'value2' as accountId,

  "value3" as "Mr_Barcode1."

  "value4" as "dr_date."

  "Value5" as "dr_user_first_name".

  Of the DOUBLE

  Create a read-only display object and paste the query above in the sql pane and keep.   It creates correctly calculated for the 5 columns returned attributes.    Then enter and modify the query and change anything (add a space) and save.   The last 3 attributes get changed to transients and the expression gets deleted in each attribute

  It's about Jdeveloper 11.1.1.4.   I thought I would post here first of all before you try open a bug with Oracle.

  I discovered that the problem is related to what the quotes around the alias.  The person who created this originally borrowed display object from another application and the alias sql was points/periods in the names and the only way that works if you put quotes around it as below.   That works well in SQL Developer, but I get the obvious mentioned the problem when using this query in jdeveloper.   If I remove the points and the quotes in the alias I don't encounter this problem.

  SELECT "Value1" as request_Id,

  'value2' as argument account_Id,

  "value3" as "d.barcode_Id."

  "value4" as "d.date1."

  "Value5" as "d.first_Name".

  Of the DOUBLE

  Gets the XML in view objects defined like this (apostrophes around the double quotes).  It works the first time you save but when you edit the expression is removed, it gets changed to a transitional.

  AliasName = ' "dr_date."

  Expression = ""dr_date"

  I still think it's a bug, but now I can work around it.

• Perform actions on read only text fields

  I work on an inventory for a renovation of the building to come and hope to make an "interactive stop' of sorts on the PDF of the floorplan showing the hardware inventory for the rooms.

  My goal is that each room on the floor plan to have an invisible field that covers (I am currently using text fields), so that when the user's mouse is in this room on the floor plan, a 'Mouse enter' action is executed to display a second text box VISIBLE read-only containing notes and inventory relevant in this specific room. Conversely, when the user's mouse leaves this place on the floor plan, a 'Mouse exit' action is executed to hide this second text box.

  I have this feature works for the most part, with the exception that the text fields that I use to describe the rooms are still visible in an opaque blue tint when the PDF file is displayed. I would have preferred them to be completely invisible and cannot be changed by users.

  If I change the property of form field to 'Hidden', or tick the box 'Read only' property, entry and exit mouse mouse actions will not run.

  Anyone have any suggestions on the best way to achieve this?

  Thanks in advance!

  Instead of a text field, use a button for mouse input/output actions. They can be parameters to have no visible border or background, so will be invisible.