read the test sequence sequence file properties

Similar Questions

• Why the total time required for the test sequence is different during the test runs

  Hello

  -J' have different test resources to test our product which includes engines and the NOR-Box (6351).

  -Number of test files in sequence that are called during the test (ca. 20)

  -The problem is that when I run these test sequence files separate (say only 3 out of 20), total time by these tests are t1, t2 and t3, but when - I left all 20 tests to run without jumping all the time needed by the 3 tests above is t1 + 60 s, t2 + 80 s and t3 + 50sec. Why it is so and how can I avoid this problem.

  -The tests are motors to move, take samples or box then save them on my computer after testing the limits. Since they are time critical, when I do all the running tests in a test go a lot do not PASS. I can't run them separately because it takes more time, more interference by user and also more than one report that is not desired.

  -J' tried unloading after execution steps, but it did not help.

  Kind regards

  RB

  This probably depends on that made your sequence. Have you tried shrink where extra time is being spent? You can time how long different parts of your sequence are following the steps of the expression as follows:

  Locals.StartTime = Seconds()

  Locals.ElapsedTime = Seconds() - Locals.starttime

  You can also watch time module in your reports. There is nothing specific on TestStand that should cause some sort of slow down like this. I recommend trying to figure out where the extra time is being spent. I suspect once you do, the cause will become obvious.

  -Doug

• I can do something that would cause all the new sequence files to have the same local variables?

  I would like to add local or drop some variables global to all the new sequence files I create. I was hoping that I could simply add the variable to the process template and make it appear whenever I created a new sequence or in any order who have used this process model, but it doesn't seem to work.

  Does anyone know a way to do what I'm doing?

  Thank you.

  Skeptic,

  If you use TestStand 4.0 and later versions, you can create a sequence model by adding a sequence selected in the models pane of the TestStand sequence editor.  You can then use this template to create all your future movies.  Once you configure the model you like you will be easy to reuse this sequence skeleton again.

• How to read the VI Analyzer config file?

  Hello

  How to read the analuzer vi configuration file? I'm getting a lot of errors on the size of the front panel and I don't know what should be the size you want. Where is the maximum expected size of the specified front panel?

  Kaspar says:

  Hello

  How to read the analuzer vi configuration file? I'm getting a lot of errors on the size of the front panel and I don't know what should be the size you want. Where is the maximum expected size of the specified front panel?

  If you have VI Analyzer installed, you can load the configuration file and look at the section select the Tests. There is a test for the maximum size of front under front-> User Interface. The default value is the resolution of the current monitor of the PC (including multiple monitors). You can change to the desired option.

• Read the metadata of a file without Photoshop or bridge

  Hello

  Suppose I have a file in office called "test.jpg". So I create this variable:

  var myFile = new file ("" ~ / Desktop/test.jpg ' ");

  This file contains some key words and I need to read instructions. And if the reading process detects the exact keyword, then it copies the file to the appropriate folder. Well, in short, I could do it directly using #target estoolkit. I´d do not like to participate (opening) Photoshop or bridge.

  Is it possible to read the metadata of a file without targeting Bridge or Photoshop? Read the reference I found no method or a property for it, wait for the metadata library. BUT

  If I try to load the library of metadata to help:

  If (ExternalObject.AdobeXMPScript == undefined) {}

  ExternalObject.AdobeXMPScript = new ExternalObject('lib:AdobeXMPScript');

  };

  then it will of course be an error file or the folder does not exist...

  No idea how I could proceed to load this library and read the metadata of a file directly?

  Thank you very much

  Best regards

  Gustavo.

  Documentation on working with XMP is in the JavaScript Tools Guide.

  var test = new File("~/Desktop/Test.jpg");
  var xmpf = new XMPFile( test.fsName, XMPConst.UNKNOWN, XMPConst.OPEN_FOR_READ );
  var xmp = xmpf.getXMP();
  xmpf.closeFile();
  var modDate = xmp.getProperty(XMPConst.NS_XMP, "ModifyDate").toString();
  alert(modDate);
  

• What process reads the spfile/init.ora file

  
  Hello

  When we start the Oracle DB using the 'START' command, what background process reads the spfile/init.ora file?

  Also at startup, process that reads the control file?

  In my humble OPINION, there isn't any background process, but the server process.

  Aman...

• Read the contents of a file (via the)

  Hello

  I need to read the contents of a file (.txt, or better, .jpg) and write again in another file.

  I have this code (in Javascript):

  Conn = new Socket;

  Conn.Encoding = "BINARY";

  If (conn.open ("127.0.0.1:8888")) {}

  Conn.Timeout = 30;

  Conn.writeln (' GET variousFiles/file.jpg HTTP/1.1 "");

  response = conn.read (999999);

  Conn.Close ();

  var file = new File("C:/APPS/New_File.txt");

  leader. Encoding = "BINARY";

  var open_file = file.open("w+");

  leader. Write (Reply);

  } else {alert ("error:" + conn2.error) ;}}

  However my new file is always empty, because I can not read the contents of the first file.

  My variable ""answer " is always empty. "

  Thank you and best regards.
  

  Hi Bob and Muppet,

  below are my new code:

  conn2 = new Socket;

  If (conn2.open ('127.0.0.1:8888', 'BINARY')) {}

  conn2. Timeout = 6000;

  conn2. Write ("GET /Temp1/file.jpg HTTP/1.0\n\n");

  reply2 = conn2.read (999999);

  conn2. Close();

  } else {alert ("Error:" + conn2.error) ;}}

  This seems to work perfectly, I managed to read the jpg file.

  Thank you

• Help: Configure the simple test sequence, operator selects particular test connects to the part of the teststand sequence file and then performs the test

  Hello

  I am very new to TestStand, please see the question below and give advice.

  I want to set up a simple test sequence.

  I want a message to popup on the screen that asks the operator what unit of 6 units (maximum 10) to test (i.e. There is say box of 6 to 10 s to select from).

  Then the sequence goes to the specific part of the sequence and performs the test on a unit that either has been selected.

  What is the best way to do it?

  I use pop-up message windows to do this? and if so what should I connect to the correct part of the sequence file?

  Pop-up message windows allow only 6 options to select from?

  Thank you

  Hello

  You can do this by using the method of message popup. You can ask the user what unit want to run message by inserting in the expression of the message in the message popup step parameters. Something like below

  "Enter the number of execution unit.

  1 Unit1

  2 unit 2

  .......

  10 Unit 10 "

  then check the 'Enable response text box"tab is different from the stage. When the user enters the unit number you can get the value entered by the user by inserting the below statement post expression of message popup step parameters

  Locals.String = Step.Result.Response

  Note: The string is a local variable to be set.

  Convert string to number and send that output to pass the expression you can use a sequence of call step to call the sequence according to which must be performed. (I hope your each unit will file separate sequence)

  I hope that this solves your problem. If you do not understand please let me know so that I can put a small example and send it to.

  See you soon,.

  Krishna

• The indicator of the test sequence parameter default setting

  Hello

  is there a way to test in a subsequence if a parameter has been defined by default in the calling sequence.

  Thank you

  Hello

  Yes it is possible,

  Try using RunState.CallingStep.TS.SData.ActualArgs

  Hope this helps

  Jürgen

• How to read the .txt adfLib pot file to the model layer by using the relative path

  Hello
  
  In my application, I use the ExtendedDynamicFldTbl (extends weblogic.wtc.jatmi.DynamicFldTbl), which the manufacturer requires the field file path table as a parameter.
  
  In the API, it is said that this name of path can be an absolute path, a relative path to the directory where Java has started, or a relative path that can be found as a resource on the classpath.
  
  I have created this ExtendedDynamicFldTbl to the model layer project, placed the fild_tbl.txt in a separate package and pass the path relative to the DynamicFldTbl constructor.
  
  Given my code below to get the instance of ExtendedDynamicFldTbl
  

  package model.tuxedo;
  
  public class ExtendedFldTbl  extends DynamicFldTbl
  {
  
      private static ExtendedFldTbl extendedFldTblinstance = null;
      
      public ExtendedFldTbl(String tablePath, boolean flag)
      {
          super(tablePath, flag);
      }
      
      public static ExtendedFldTbl getInstance()
      {
          if (extendedFldTblInstance == null)
          {
              URL url = extendedFldTblInstance.class.getResource("resource/fldtbl.txt");
              if (url == null)
              {
                  throw new RuntimeException("Tuxedo Service : fldtbl.txt is not found in the path 'model.tuxedo.resource' ");
              }
              extendedFldTblInstance = new ExtendedFldTbl (url.getPath(), true);
              String[] list = extendedFldTblInstance .getFldNames();
              System.err.println("fldtbl loaded. Total FML entries loaded = " + list.length);
          }
          return extendedFldTblInstance ;
      }
  }

  I just added the output of the build of the layer model to view the project of the layer and tested. It works fine and I am able to get the ExtendedFldTbl instance with all loaded fields. But rather than add dependencies, if I create an adfLibJar for the layer model project and you add to view the project of the layer, it does not work. It is not ablt to read the file of adf lib jar file.
  
  Issues related to the:
  
  1. How can I solve this?
  2. Although I have kept the field text file table in the source of the project itself, when I read the url, it is

  "C:/Documents and Settings/raguramanv/Application Data/JDeveloper/system11.1.1.4.37.59.23/DefaultDomain/servers/DefaultServer/tmp/_WL_user/SampleWtc/3gkmt9/war/WEB-INF/lib/SampleWtc_Model_adflibSampleWtc1.jar!/model/tuxedo/resource/fldtbl.txt"

  Instead of the physical directory, how can I use application in model layer context?
  
  
  Thanks in advance
  
  Rambeau

  Hello

  Try /adf/ or /afr/ in the URL. Then includes the ADF resource loader which is used to get the contents of a lib of the ADF. Take a look at the structure of ADF library where the file is located in. It should be in a directory with /adf in the folder structure

  Frank

• How can I change the NTFS file system to say fat so my TV will read the HD Ext USB files? Thank you

  Using Vista, downloaded a movie on 2GB USB flash drive and Iomega 1 TB HARD drive then strove to connect both in TV Grundig.

  Read file ok but wouldn't play film "says cannot read the file format" all clues please? For your info I have 63 years if my grandson was here 6 years old it would probably sort fast time, but I can't! :)

  Hi Norman,

  After you convert a partition to NTFS (New Technology File System), you can not convert back. If you want to use the FAT (File Allocation table) file system on the partition again, you will need to reformat the partition, and this will erase all data on it.

  Click on the link mentioned below as reference.

  http://Windows.Microsoft.com/en-in/Windows-Vista/convert-a-hard-disk-or-partition-to-NTFS-format

  Good day!

  Answer please if you face concerns.

• I can't get Premiere Pro to read the timecode of ProRes files

  I have a pix240i that I use to record the Pro Res files to.  When I import the ProRes files in first, the timecode for each clip begins to 00:00:00:00, instead of display timecode camera recorded, even though I have "Use Media Source" selected in the preferences.  If I take the same clips in Quicktime or Final Cut Pro, they read the appropriate timecode.  It is a big deal, I need to be resolved.  All the solutions or is this a Bug Pro first.  I did some research and found that some people had this problem last year, but I've never seen a resolution.

  Greg Jones

  D7, Inc.

  Hi Greg,.

  I have the following problem registered:

  • PrPro is not read/display TC correctly from PIX recorder captured ProRes files

  It is supposed to be fixed in first Pro CC 2015.0 (9.0). So, if you're still on 8.2 or earlier version, you can upgrade to the current version. If you are on 9.0 or later, please file a bug report. Also, let me know if you do, and I will try to reopen the previous bug, as well.

  Thank you

  Kevin

• Camera Raw does not read the previously saved XMP files (Canon 60 d)

  Hello

  I want to ask if this is a real problem or just me something wrong.

  I open the RAW with Canon 60 d (Photoshop CS5, Camera Raw 6.6) files, then I do what has not (cropping, exposure changes, hone... etc), then I click on the done button. Camera Raw saves XMP files with RAW files. After that, I want to make some changes more, I open the RAW files, but Camera RAW doesn't "remember" what he did a few minutes before. I guess that it isn't read the XMP files it created.

  If it's me or it's some sort of bug?

  I don't have this problem when editing with Canon 400 d RAW files.

  Thanks for your time!

  There is a difference between not remembering your changes and you see do not the changes you did just.

  If you use embedded thumbnails you will not see any changes, but you can see a shield in corner superior human resources indicating the changes.

  You will see the version published in the preview.

  If you want to see montages in the thumb, you should use one of the options HQ.

  I hope this helps.

• RMAN-00565: cannot read the input BIA-01506 file: fflush() failed (return OSD

  Scheduled backups, TSM match times will fail with the following error
  ' RMAN-00565: cannot read the input file.
  BIA-01506: fflush() failed (OSD return value = 5). »
  
  And flooding the natural logarithm of exit with the following error
  
  ' RMAN-00558: error occurred during parsing of order entry.
  RMAN-01006: error scored during the analysis
  ' RMAN-00600: internal error, arguments [2012] [] [] [] [] "that leads to the FS is filled up to 100%.
  
  But backups are run successfully if start us it manually. Can someone help me with this

  You will need to set echo on inside your execution block.

  #!/bin/ksh
  . .env
  rman target=/ nocatalog log="${BKP_LOGS}/tsm_${ORACLE_SID}_ARCH_$(date '+%y%m%d@%H%M%S').log"
  run {
  set echo on
  allocate channel t1 type 'SBT_TAPE' parms
  'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo_${ORACLE_SID}.opt)';
  backup archivelog all delete input;
  release channel t1;
  set echo off
  }
  

• What is the easiest way to add the "comment field" of each step of a sequence, in the test html report file?

  I use Teststand 3.0, and I would like to have the comment field of each step of my movie file teststand appearing in my html report file.

  I guess I'll have to change the model of teststand ReportGen_html, but I would like to have your opinion to do so in the most simple...

  I have already changed it the SequencialModel for other purposes, but the ReportGen_html seems to be much more complicated to change...

  Thanks in advance for your help (and sorry for the bad English)!

  I converted the wire quotes as an example to 3.0.

  The approach is quite similar to my suggestion with a difference: instead of using custom step types, the example uses substitutions of callback to copy the string.

  Norbert