Reader combo CDRW/DVD GC4244 installed on my Dell Lattitude D820. XP Professional.
I have a Combo CDRW/DVD GC4244 player installed on my Dell Lattitude D820. I ran the CARPET RUN program in order to help me solve a problem that I am facing for some time now. Previously, I could use this combo HD-DT-ST GC4244 to write CD - RW. Now, the program tells me that it is not able to do... Why? Help!
Hi ChrisBraeckman,
1. did you of recent changes on the computer?
2. what happens when try to use the player?
3. you receive an error message?
The article below and run them the fixit tool available, if you have already run the fixit tool is then try the manual steps mentioned in the article below.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
Also check the condition of the disc on the computer using Device Manager and view details in return.
How to solve the problems of hardware with Device Manager
http://www.Microsoft.com/windowsxp/using/Setup/learnmore/devicemgr.mspx
Tags: Windows
Similar Questions
-
Hello you all frustrated users Dell! : manhappy:
Before I post my solution, here's what happened to me...
Towards the end of November ' 07, I decided to update all my drivers for my Inspiron B130 running Windows XP sp2, including the firmware for the TS-L462C 24 x CD-RW/dvd combo drive.
In the next few days to update, I noticed that my audio started his jerky / stutter any kind of program that I used to listen to, unless you use the CD player.
I came to Dell and started browsing these forums for a solution, given that my warranty was expired, and only Dell was to restore the original configuration, that was not a very practical solution with all the unwanted 'important' that I have accumulated in two years.
I've tried everything by many users with the same annoying problem recommended here (update of Bios, drivers roll back, etc.).
The only thing that worked was to keep a CD in the drive at all times, which as we know, is not a permanent solution, but is favorite Microsoft term... workaround.
What I finally discovered that was the update of the firmware Dell 'bad' DE07... why they don't check these things?
The solution I finally found, after months of this and other forums, research is to restore firmware DE07 DE05.
That at first, does not seem that easy because the DE05 flashes the firmware from a boot disk and my B130 came with a floppy drive.
So here's how I did it...
1. If you haven't already, you will need the DE07 utility that comes with the upgrade.
Get it here... TS-L462C DE07 firmware
Follow the instructions to download and unzip, but do not install... we just need the windows Flash utility.
2. download and unzip the DE05 firmware.
Get it here... TS-L462C DE05 firmware
Note the location of this folder, because we need the .bin for sync this folder file.
Mine unzipped here... C:\dell\drivers\R114334
3. now open (double click) on the update of the firmware DE07 called SFDNWIN.exe
and follow the instructions to update...
a. click on the download file ' open' button to the left.
b. do not click on the DE07_060525.bin, but instead, navigate to the folder that has the DE05.bin, who, in mine, is located at C:\dell\drivers\R114334, to select. Click on 'open '.
c. click on the "Start download" button in the middle.
d. click "Restart Windows".
e. system will restart after the flash is complete.
I hope this has been helpful and not too complicated, but it worked wonderfully for me!
: manvery-happy:
Good luck
Ed
Message edited by e3_prog on 12/02/2008 10:49
-
Dell Inspiron5100 WinXP SP3.
Due to malware, I had to FORMAT my HD and re-install Windows XP OEM disc. I also reinstalled WIN DVD4 from the OEM disc that came with the laptop.
Check SYSTEM/DeviceMGR/material indicates a problem with the drive, but: it won't READ a DVD or burn a CD (which she has done before)
Can't update anything of QSI as they were absorbed by COREL years. No support available for WINDVD4
When you try to run WINDVD4 with a DVD in the drive, I get a Popup of WINDVD screen that says:
CREATE OVERLAY FAILED-Please lower your color depth or screen resolution and try again. Of course, it worked fine with the reg settings in the past, now Ive tried even lower TWO the RES SCREEN and color at least registered but still does not work
It WILL play CDs of music (mp3s)
Found the following material etc.
Provider: Microsoft Corp.
File version: 5.1.2600.5512 (xpsp 080413-2108
Driver date: 01/07/2001
Driver version: 5.1.2535
Driver files
C\windows\system32\DRIVERS\cdrom.sys
"" "" \DRIVERS\imapi.sys
«"\DRIVERS\redbook.sys «»
«"«\system32\ c:\windows\system32\storprop.dll»»»
I installed and ran but it won't play MICROSOFT 'FIXIT' DVDs just run from WINDVD4 and still does not.
FIXIT now brings me HERE
It seems that FORMAT/reinstall has missed something the will allow the CD PLAYER of .1BURN and 2. READ the DVD, but allows you to PLAY CDs
From: * e-mail address is removed from the privacy *.
To: * e-mail address is removed from the privacy *.
Date: Tuesday, May 17, 2011 08:30:29-0700
Subject: QSI SBW 242 CDRW/DVD not play DVD or BURN a CD (music CD will PLAY) [AFTER the HD FORMAT and re - install}ResponseHello
1. are you able to read any type of file .doc or .txt of DVD?
After following all the steps (including the update of the MP9 for Media Player [MP] 11) below
I can get the drive to DISPLAY all the data from the DVD (Master & Commander 'movie)
on-screen MP11. He plays (automatically) the intro (ONLY) from the DVD music (as when you put it in a DVD player, forward to press PLAY) MP11 shows all of the content and all the files on the DVD and SEEMS ready to play, but pressing on PLAY don't either not anything.
2 , what exactly happens when you try to burn the CD? You get the error message?
Not nothing... He's here
3. How do you try to burn CDs?
MediaPlayer, selection of a track list, made a list of titles, and then click BURN... nothing happens
4 have you tried to play the DVD content in ? windows media player
I had not before, but now I have. Previously it was default to my SELECTION WIN DVD4 as the DVD player (I think I've EVER SEEN the WINDVD format/start page on the front screen - it wasn't the default front DVD player either but don't remember what program PLAYS the DVD, he ' comes of "). Now, go back and see 1. above for MP11 more details.
Try to update the drivers of CD-RW/DVD drive and check. Also update the graphics driver.
I did the entire bottom.
1. click on Start, click Control Panel, and then double-click System.
2 click on the hardware tab, and then click Device Manager.
If you are prompted for an administrator password or for confirmation, type the password, or click continue.3 right-click on the CD-RW/DVD drive, and then select set to update driver.
He asks if I have an OEM driver and / disk... NO.. I run the program through...
"Hardware update Wiz can not find a better match the software installed"
4. right click on the graphics card and select Update driver. »
There is no "graphics card" on the material. This machine has integrated graphics using a part of the main memory (or other) to run the video section:
I find:
AUDIO, VIDEO and GAME controllers (announcement)
Audio codecs
Audio drivers
Legacy video capture device
Media control devices
Audio Sigma
Video codecs
All this seem normal but above I see YELLOW TWO warnings under 'OTHER DEVICES '.
?! Ethernet controller "drivers for this divide (code28) is not installed.
?! VIDEO CONTROLLER (VGA Compatible) I didn't HAVE NO IDEA if THIS if APPLIES OR NOT
Device type - other devices
MFG-unknown
Location PCI bus, device 0, function 0. "Drivers for this device are not installed, CODE28 to reinstall the driver."
Has been through the usual (request for drive... Laughing out loud. Impossible to beat")
See also:
How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
http://support.Microsoft.com/kb/321641
Did yesterday. It installed/ran "MR. Microsoft Fixit' with the result:
"Question: media in the CD-RW/DVD drive is not readable" CLICKED top DIFFICULTY... and after computer "worked" on this subject awhile, he says STATUS: fixed. St ill did not. MP9 introduced the format of the DVD player but don't seem to read anything other then showing a list:
UNKNOWN
Title 1
Title2
Title 3 etc., but could not do anything with this list.
He appeared a box asking if I wanted to update my MP9... sure why not so I shut everything down and uninstalled 9 and installed Media player 11.
Go BACK to # 1. now once again. This is where I am. MP11 shows all DVD data, the chart "the Album/DVD cover, all"titles"on the DVD, AND play the track audio 'intro' DVD but will not actually READ the DVD. "
So far it's PROGRESS. We are at a point where it SEEMS at least that we are ready to PLAY and MP can SEE all the info on the DVD.
I see many people on other sites of the same question: Player does not work after FORMAT operating system and reinstall of WIN (and in my case: WinXP SP3 and WIN DVD4 of OEM disc)
Thanks a lot for your help so far... I hope that we can get to the next step and get the reader of CD-RW/DVD on 'PLAY '.
-
Sat Pro 490xcdt & compatible SD-2212 of CDRW/DVD combo?
Hi, I hope someone can tell me if a Toshiba CDRW/DVD combo drive (model # SD - 2212) is compatible with a laptop Toshiba Satellite Pro 490XCDT?
I searched the web and the toshiba FYI compatibility site but did not find any indicating one way or the other.
Thanks for any help or suugestions.
Hello
Well, I put t know if this player is compatible with this unit, but I found other readers that are supported:
Part numbers: P000242100, P00025200, XM - 1602-B, ZA2000P04Please visit this page where I found this info
http://store.Yahoo.com/priorityelectronics/p0tosapro49s.htmlGood bye
-
A 'ATAPI DVD A DH16A1L"installed in my computer DVD cannot read or write DVDs
A 'ATAPI DVD A DH16A1L"installed in my computer DVD cannot read or write DVDs. Please help me solve the problem.
Your question has been moved to a more appropriate forum. Please provide more information.
-
Samsung cdrw/dvd sm-316 will not read disks
help with samsung cdrw/dvd sm-316 b, who can not read any type of disc
Contact technical support Samsuns, read their knowledge base or ask in their forums. And when you do, be more precise that «help with...» »
This means absolutely nothing.
-
Downgraded to XP: now cannot read DVDs (not installed dvd decoder) for dv2000 CTO
I just installed a new hard drive and Windows XP Professional 64-bit. My computer is a laptop Pavillion dv2000 CTO. Product # is RU769UA. After installing the new OS (it was originally installed with vista home), I found that my sound does not work. I tried to install all or most of the drivers for my model, some who have been for vista has failed. AFAIK, the drivers that worked was installing (sound)... but I'm not entirely sure. I am empty and could really use some help with this. It's my last problem with this computer. >.
Edit: And I just realized that I can't play DVDs without having this error message - "Windows media player cannot play this DVD because no compatible DVD decoder is not installed on your computer.
Message edited by Azu on 30/04/2009 14:45Edit2: I have finally the wireless connection works! Now, I just need to understand the sound. It does not record the sound devices!Message edited by Azu on 30/04/2009 15:57Message edited by Azu on 01/05/2009 13:20Message edited by Azu on 01/05/2009 13:21Thanks its working now!
But I still have problems with DVD playback... I am out of the dvd decoder and can not find the download for just a dvd decoder. I downloaded a few media players but all still not allow me to read the actual DVD disc. I've already spent too much money on this computer and I really can't afford to buy any additional software. Is it possible for me to find the decoder correct drivers/dvd for free?
-
I upgraded from vista business to windows 7 premium. Now I can not read DVD or install programs with disks, etc.
If your dvd player is as it does not exist and is one of those listed below you may need a firmware update. If this isn't one of those listed so my answer does not apply to your situation.
If your dvd player is one of the following values, see kb975270
Sony BC-5100 s DVD
Sony BC-5600 s DVD
TSST TS-L633B DVD +/-RW DRIVE
-
Hi guys, having problems installing adobe photoshop 11 (with or without activated antivirus) elements but able to read any other DVDs and CDs. error message: Error 1935. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system.
Download & install instructions https://forums.adobe.com/thread/2003339 can help
-includes a link to access a page to download the Adobe programs if you have problems with a disk or drive
Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq
-
HL-DT-ST CDRW / DVD GCC4244 / reads, but will not write
Drive is not capable of burning (HL-DT-ST CDRW/DVD GCC4244)
One or more CD/DVD drives are not capable of burning
window media had tried problem fix no way updted to windows Media Player 11 it works very well now CDRW/DVD drive isn't reconizes for recording
in properties I've implemented it see the recording used regedit workedthrough it backup to backup discs
follow-up of the T
stanleywright
E-mail address is removed from the privacy *.
Hello
I suggest you try to execute this fixit and see if it helps:
http://support.Microsoft.com/mats/cd_dvd_drive_problems
It will be useful.
-
My first attempt seemed to work although I don't not re-install all the drivers at this time here. When I then turned on computer, I got a white screen. I took advice and tried to install xp again. I get regarding the selection of CD/DVD to install (enter), then I press any (I have not pressed a key any), screen is empty, and that's all.
Hello
It seems that this computer is not able to detect the drive. Use the steps described in the article mentioned below to clean the disk, and then try to install XP.
How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
http://support.Microsoft.com/kb/321641
If you are able to boot to the desktop without inserting the disc, please perform a flat installation.
How to perform a flat Installation of Flat copy CD to hard drive:
http://support.Microsoft.com/kb/294727 -
HP DVD Writer does not read or write DVD, but only the CD
My HP DVD 1135t burner does not read or write DVD but only the CD. What is the problem? Please help me.
CD/DVD players use different lasers for reading/writing DVD from the CD. All indications would point to your laser DVD as having failed. You could try to remove your drive and install it in another computer to see if the problem follows your player or your computer, but my bet is that the drive must be replaced.
HTH,
JW -
my Bank nothing read all used dvd
Ive just bought myself a game new call of duty world at war and I put it in my DVD player and it says please insert a disc that in even if he was here, I got my latest driver installed on the PC and it's the same for all other disc ive tried to uninstall the driver and install it again but seems not to happen I'm supposed to run Setup when starting from my PC to the top?
Hi, RYAN WHITEHEADkk,.-Were you able to read/write CD/DVD without any problem before?
-Have you done recent changes made to your computer after this problem started to happen?
Try running the Fixit tool from the below mentioned link and see if this is useful to fix the problem.
-
Windows media player cannot read CDs and DVDs
MS supports says my Player DVD is dead and needs a new drive. So, I just install a new ROM DVD and still have the same problem - cannot read CDs and DVDs.
When I play the CD, I always get the error meessage--(lecteur Windows media a rencontré une erreur lors de la lecture de lecteur de CD en mode numérique...). 'Digital' is selected under the tool-> properties-> device.
When I play DVD, it is frozen my laptop or keep spinning and froze the Windows Explorer and the reader.
I was able to read DVDs and CDs once after a few restart. During playback of CD the WMP abruptly stopped with error message and since that time cannot play CD DVD & more.
So far, I did a few fixs that I found online and nothing wroks:
* No upperfilter or UpperFilter registry
* Uninstall and let the laptop automatically reinstall the driver
* Ms. Fix it gives different results every time I run the fix-(1) detects no problem and therefore no patches have been applied (2) the main media in the CD drive is not readable (same CD has played correctly when using external USB DVD rom)
Can someone help and let me know what that could be the problem and how to fix it! Thank you!
Hi Amy,
You can read the following article to clear the Windows Media Player database and check if it helps.
You cannot view, add, or delete items in the library of Windows Media Player 11
If you have any third-party media player installed on the system, then check if the DVD player works with it.
-
Can not read my CD/DVD drive CD.
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
I can read both regular DVD and Blu - ray DVD in my drive and until a few months ago, I could also play CDs. All of a sudden I couldn't play CD any longer. The drive recognize anything in the drive when a CD is in it. The PC 'says' it's empty. I tried to fix the problem with the removal of the drive in the list of the unit, but she came back with the same disability as descripbed on reboot. I also trided 'FIX IT' via the MicroSoft Support and HE told me that he could not fix the problem. Help, please!
Hello
· Remember to make changes to the system, software installed or deleted some software on the system?
Try with another CD/DVD and check if the CD/DVD drive is able to recognize the drive.
Apart from that, I suggest you follow the steps described in the articles below and let us know your progress.
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052I suggest you follow the steps manually it is present in the fix he article mentioned below.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Smart pro iPad Keyboard page up/down question on Safari
Hello. Don't know if anyone else has this problem: On Safari, if I press the SPACEBAR on the smart keyboard, it always seems to scroll through several pages rather than just a single page. Does anyone else have this problem? Is it possible to configu
-
Why my password field auto?
I posted this a few weeks back with no answer. Try again. When the awakening of my Mac, it auto-remplit with a password that I don't see (obviously). When I click on->, the password is incorrect, and he just "wiggles". When I highlight the bad pre f
-
Sale me este error como lo corijo? the application attempted to perform an operation not allowed by the security policy. The operation required the SecurityException. To give this request permission contact your system adeministrator or ysé the Micro
-
I had some that I have files protected by Word, under my administration account that s wa also password protected. recently, I had to have my computer reformatted and returned it to me without administrative access, research nothing same and none of
-
How to get the PC to print Word, Excel or PDF files. It only prints the notebook filed
1. number and product nameHP Pavilion p7-1467cb PC and printer of HP C4480 PhotoSmart 2 operating system installed (if applicable)Windows 8 3. error message (if any)None. Printer cannot print from Word documentsPrinter does not print Excel documentsP