reader question

Similar Questions

• Patrician Fusion reader question: MBP2015

  State of play

  In fact, for assistance from apple, but it seems that this form can be connected to a forum, I do not often use apple support.

  Due to an accident with a patrician resizing process, it seems that the matching of hybrid car has been made

  I just tried directions returned to the https://support.apple.com/en-ie/HT202574, the mode of recovery Via Internet > disk utility > repair disk the disk appear in red with the name of the entire virtual disk, underneath it is an icon named disk0 in black and indented below it is an OS X based system in black icon. By selecting all of the virtual disk in red and then repair disk an ALERT says

  After the line titled disk1s2: search Volume headers the following lines are in red

  After what lines starting with the header for invalid volume or invalid Disk Label is read.

  The last line in bold red States,

  Error: This disc needs to be repaired. Click the repair disk, resulting in a never ending cycle

  the statement is included in the log above from the ERD

  The volume Recovery HD seems to be OK. (in green)

  SO THE NEXT STEP seems via terminal

  diskutil list provides useful data

  through terminals diskutil list describes the disk mount points 0, S1, S2 and disc 1 + s1 to s3

  the remaining disk 9 DIS3 list only a mount point. the cursor stops at/dev/disk10

  However I am unclear what should look like the result

  I think I need to move a copy of the recovery of a USB tool before watching

  The following relevant instruction set seems to be

  http://www.TechRepublic.com/article/Pro-Tip-how-to-create-and-disable-a-fusion-d shore.

  But if apple has a script that I can download and add on a usb key with the wizard recovery tool that would save a lot of time.

  I hate the idea of returning the laptop for a repair centre because of a command line command, data it is not a problem here, nor the hardware has been damaged.

  As I see, below, its likely that this form of e-mail does not support Apple, but a forum, so I removed the mention of the serial number of the machine.

  TO answer my own question:
  Problem solved through the procedure described under restore fusion drive

  Via Safari in recovery mode the command-line coded suggested fortunately resolved my hard drive and now is operating system, reinstallation,

  Concerning

  Colm

• Another 5-in-1 Media Card Reader Question, ZV6000 series

  I have a Pavillion ZV61000 ()PN494AV) who works fantastic for the last 4 years.  I recently upgraded to 2 1gig RAM and installed a new drive hard and so re-loaded XP Professional from the "recovery" disk supplied with the laptop.

  I was at HP Total Care and updated all the drivers and to update.microsoft.com to update the drivers even more.

  However, the only thing that doesn't seem to work is built in the 5-in-1 card reader.  On the SD (2 giga) SD card, it wants me to format and when I try, he then refuses to format the card and my HP from my DSLR 4Gig SD card, will not show in my computer.   Shows Device Manager everything works fine.

  Today, I went to HP.com and downloaded the driver suggested sp30714.exe ftp://ftp.hp.com/pub/softpaq/sp30501-31000/sp30714.exe and installed without success.

  I read everywhere on the internet where people are having the same problems with their readers of meda 5-in-1 of a regenerating of the lines of portable Pavilion.

  All I know, for me, the drive worked fine until I reloaded XP and having to assume the driver is bad or out of date.  However, none of those from HP.com or Microsoft seem to work either.  Cards (both the 2and 4 gig) are legible on the laptop USB external drives, so I can assume that this is not a problem recognition SD card, but rather a physical card or software reading number for the built-in player and because the drive worked very well under the original XP installation, I have to assume this is a problem of software between Windows and the drive so a pilot of the question.

  I searched the Forum, and that some problems are similar that they were not my particular model of HP and I don't know if this is a factor in the resolution of the problem.

  Any other suggestions?

  Solved!

  Found this solution and although I do not have these models of laptops, once I downloaded the patch and installed, 4Gig cards were suddenly readable.

  DIFFICULTY for HP 5-in-1 incompatibility.

  FTP download link: SP35308

  I hope this helps others.

• Qosmio F50 - 10K: Fingerprint Reader question - sensor cannot be started

  Dear Sirs,

  I have a problem with my fingerprint reader.
  I just re-formatted my new laptop which is only 4 days old. I have a Qosmio F50 - 10K.

  I uninstalled Trueaccess Manager software several times and installed the latest version of the software from the site of EU from toshiba.

  I also used CCleaner to clean the registry.
  I always get an error indicating the sensor cannot be started.

  Can someone help me please?

  Thank you
  Danielsam

  If I remember well with fingerprint sensor small tutorial that will explain exactly how to do this and you can also practice how to remove the finger on the right track to successful fingerprint registration.

  To be honest, I can't imagine that there is something wrong with the software. Do a little test and let someone else to record fingerprints.

• Qosmio X 500 - 11 d: Fingerprint reader question and webcam problem

  Hello

  I am the owner of a portable X 500 - 11 d of Qosmio computer and I ran into a few problems these last time:

  1. After installing windows 7, the fingerprint reader has worked flawlessly for about a month, but now the login screen of windows 7 not poster not the option to connect with the fingerprint and when I try to start the utility of fingerprint toshiba it gives an error could not connect to the sensor.

  The strange thing is that I can't find the finger print sensos under Device Manager. Windows just does not detect it. I tried to reinstall the drivers and software, I've updated the bios but nothing works.

  2. the camera on the laptop, it is installed properly (the said driver is ok) but when you use the image is all black. I should mention that the blue light turns on when you use the camera.

  I tried to find a solution to the fingerprint issue o the forum here, but nothing has been using, hope someone knows how to solve.

  > The strange thing is under the Device Manager I don't think the impression sensos finger; Windows just does not detect it. I tried to reinstall the drivers and software, I've updated the bios but nothing works.

  Well, I m sure this laptop model X 500 - 11 d supports the fingerprint sensor.
  Please set the BIOS to default settings and check if there is a BIOS setting that can enable or disable the fingerprint sensor.

  > 2. The camera on the laptop, it is installed properly (the said driver is ok) but when you use the image is all black. I should mention that the blue light turns on when you use the camera.

  I had the same problem. In my case, that the room was too dark and the cam didn't work well. I had covered the lens of the webcam and after that I withdrew my finger from the webcam, webcam worked again. Notes; the room was very bright and the probe could catch the environment. I don't know if this could help Mr. maybe, you need to uninstall the webcam software before you try this procedure

• IdeaPad Y560 Bluray (0646-54u) reader question

  Just ordered a laptop LG CT21N Bluray drive from newegg. Someone already had problems adding this drive or a spare optical drive specifically for this laptop?

  Reader is installed and works perfectly, ripping a bluray movie as I type this. All lined up, just unsnapped the bezel from lenovo off the coast of the old drive and put it on the new drive. stock screw for the rear mounting has also worked. looks totally stock, eject button works perfectly. Total time was less than 10 minutes.

• Read questions CD player

  On my W510, the drive will not read any media. He sounds like he's trying to turn but stops grinding and repeat this a few times before giving up. However in my computer it appears as an Audio CD, so he might be able to read a little. Here is a record of the good http://clyp.it/4kamfp4l to be the reader able to be fixed?

  After re - insert the CD/DVD drive-ultrabay as to gently clean the lens, I was able to let him read a DVD and a CD again.

• HP ENVY 17-j005tx Notebook Finger print reader questions

  Hi all

  Already a few weeks or so, my fingerprint reading begins to play up - when I start the laptop, it seems do us somehing to the connection and logon fails permanently - when I try to open a session keyboard always fingerprint reader sends something and can not connect - it just cause connection to fail over and over in a loop.  I can just manage to turn off the laptop by clicking on the button turn off and select the off option.

  I found a reason if I hit F10 to enter the BIOS setup, e and exit, reboot all goes well.  Then I can use the fingerprint reader to log in again. Then a few weeks can go and the same thing!

  What gives?  Someone at - it suggestions? Is this a bug of material or something - it is possible to disable the fingerprint reader so that if in the future he sticks completely upward, I would at least have the ability to disable.

  Jim

  8.1 Windows x 64

  Validity Sensors, Inc. - 4.5.122.0 - 19/03/2013

  HP Simplepass 6.0.100.276

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  Hey JimT.

  For the fingerprint reader not working not properly, I've included the document ' a (Windows 8) fingerprint reader troubleshooting'.» Please follow the steps in order for best results.

  So, there is a fingerprint sensor driver update digital validity. I got it here for you. This pilot has a version of the 4.5.228.0 Version and was released on 09-30-2013.

  Please let me know if these steps solved the problem, thanks.

• BlackBerry Smartphones Media Card can not be read question - tried several 'solutions '.

  This morning I look a some photos on my BlackBerry Pearl 8130 (carrier Verizon) and all of a sudden, when trackballing on a thumbnail and trying to open the photo, it just sort of frozen. She would not open the photo.  After a few seconds, the best hypothesis, I would say that 30 or less, it says "Media Card can not be Read. I went to the Options > Media Card and checked all my settings.

  Map of media Support - > on

  Encryption mode - > no

  -> On mass storage support

  Enable Auto-> guest

  I put the MicroSD card in the card and my laptop and he could read all the files correctly. I put on my C: drive and formatted the card in the phone. The BB gave a successful message and again, could not be Read...  I put the card (with the files back on them) in another bead and it reads the card and thin files.

  This happened only once in the past and the infamous battery pull worked. I tried 10 + times now with my phone and still no luck. Whenever I left the battery longer and longer. I am sure that is not the card, and it is not stuck in mass storage Mode, since I've not directly connected the phone to the computer with the cable from the problem.

  It seemed if strange could be viewing of a file on the card and then all of a sudden stop grateful the card. All the copper in the card slot rods are straight and not bent. The card is a SanDisk 1 GB.

  Any help would be appreciated.

  I think you're right. I had two go wrong in mine, unrelated to the BB.

  Please let us know when you get another, and we can go over the options.

  Please solve this thread and open a new one when you get the card.

  Thank you

• Update causing Lightroom XMP read questions?

  I am incredibly frustrated at the moment. I searched but I can't find anything. I spent the days all the photos I took for my video of period of treatment. Thousands. And then Lightroom has this annoying problem with sync moving place. It seems if you synchronize more than 4-5 photos at a time (doesn't really work for thousands of images), you're good. If this isn't the case, the source, he pulls from the place of replacement, transforms each photo. And so for the timelapse, you see this flicker, since the source changes based on photo by photo. I thought that, maybe, I need to update? Yes, I did. At the time wherever I did, my pictures went into the toilet.

  I am writing my changes to XMP, so that when I save them and use these backups, the changes are still there. I have dealt with the photos like I said, upgrade from lightroom, and now everything has changed. They have the 'appearance' of the photo as it was - before the update to lightroom. If I wait a second or two, he moves with the change. Let me stress, however - the changes are IDENTICAL. Not a single parameter change. All the settings are on, they have the same settings of the same too. Now, I've provided two pictures, the pre (before a second or two passes and adjustment shows) and the photo after he sets himself. I don't understand what is happening. I tried the metadata > reading metadata and that did not work, it just instantly shows the appearance 'up-to-date '.

  This is what it looks like before it adjusts.

  

  A second more later, it moves in this appearance. Yet, nothing has changed - other than the update of Lightroom.

  

  Please, I beg you for help. I don't think I could last again to change some sequences of thousands of photos. Everything faded color, Blacks are not as dark as before. And I have not changed anything, other than the update of Lightroom.

  You have the Nikon D810 bug? See this thread.

  Re: The latest version of CRD is broken for the Nikon D810.

• Adobe Reader questions

  The creative cloud has Adobe Reader included in it?

  Adobe Reader is totally free.

• Inspiron 530 Intel Core2 Media Reader question

  I got this new system for about 6 weeks. Today I tried to fend off a Compact Flash card in the

  Dell Media Card Reader included in Dell Bluetooth Package
  

  All up to this that pushed back in the case. Is this just a missing screw? I need to disassemble the case anyway to put a 2nd 500G Sata Drive, that I just bought.

  How can I get advice?

  Thank you

  
  

• Acrobat 9 Pro-iPad pdf reader questions

  When I create/modify a PDF in Acrobat 5 and then send it to my iPad, the pdf will be complete and correct.  When I create/modify the same pdf in Acrobat 9 Pro and send it to my iPad pdf will be absent all of the data that I have edited and the other text will be blurred.  This occurs when you use the iBooks and Pdf Reader Pro by iTech development to see the pdf file.  Is this a problem with Acrobat or pdf readers?  What happens differently in Acrobat 9, which could cause these readers have problems?

  Use the press or the print job settings so that all fonts are embedded. I think that the iPad is not recognize some of the fonts and they are not integrated. You can check with ctrl-D (or PDF properties) for the included fonts.

• iPod Classic Toyota Camry reading questions

  Recently, I traded in my 2012 Toyota Camry hybrid for a Toyota Camry hybrid from 2016.  In my old Camry I could recharge my iPod Classic while listening on the usb port.  In the version of 2016 of the Toyota Camry, the unit, no fees, but it also constantly freezes.  Is there something I can do to fix this?

  I rent cars often and I plugged my iPod Classic on a lot of different cars and it works fine.  The only time where I had problems with my iPod Classic is in my Camry from 2016.  Help, please.

  You should consult the user guide for the car audio system, to check the list of supported devices.

  NOTE: In systems modern car audio the connected device is as a storage for the files of the song.  Car audio system made the song played, by accessing the iPod as a storage device.  The iPod is not playing through the car audio system.  The iPod performs the same function as a USB at low prices with records of songs, when it is connected to the USB port on the car's audio system.

  If you haven't already, do a Reset (reboot) on the iPod.

  Learn how to reset your iPod - Apple Support  (see iPod with a click wheel)

  If this does not help, in case there is alteration of the data on the iPod that causes the problem of 'freeze' when the car audio system tries to access the iPod as a storage device, you can do a restore of the iPod using iTunes.  This erases the iPod, reinstall its software and sets it to the default settings.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

• Reader question music Xoom

  I'm a Xoom, and I was just wondering if the stock music player can sort by track number?

  I use iTunes. What I do is to convert my music in iTunes .m4a to .mp3. It seems also that the Walkman androids confused when there is more than 1 disc in the album, in this case I use Mp3tag to remove the disc number and replace the track numbers so Android think there is only 1 disc. I tested it out and it seems to work perfectly.