reader_sl.exe - application error appearing followed 0xc0000022

Similar Questions

• On startup, I get the following error: spoolsv.exe - Application error

  On startup, I get the following error:
  Spoolsv.exe - Application error
  The instruction at "0 x 10002837" referenced memory at "0x00000000".  The memory could not be "written".

  Then the print subsystem stops.  Windows update service keeps control and verification.  I let go 20 hours and it is never resolved.  I can't open some applications requiring printers.  Help please.

  Bill

  Hello DragonBill,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Regarding your question, the most common cause of the error is an abundance of. SHD and. Files in the directory of spool SPL.  These files are created by the spooler to save data delayed a print job.  The. SPL file contains the drawing commands and the. SHD file contains information of working parameters the print job.

  To try to correct the application spoolsv.exe error, you must remove these files from the system.  To do this, perform the following steps on your Windows Vista computer:

  1. open the Control Panel, select Classic view, select Administrative Tools and then select Services .

  2. in the Services management console, find the Spooler service, right-click on it and select stop.

  3. then open the folder C:\Windows\System32\Spool\Printers .  (Here, we assume that your Windows is installed in the default C:\Windows folder)

  4. delete all the . SHD and SPL files in this folder.

  5. then open the TMP folder and delete all the old, unused files in this folder.

  6. Finally, restart the spooler from the Services management console service.

  Important note: If you are unable to delete the files in Normal Mode, then you may have to restart your computer in Mode safe to delete files.  To start your PC in safe mode, press F8 when the system restarts, and then select the Mode option safe mode from the Windows Advanced Options Menu.

  If deleting the files do not straighten out the problem, you must perform a system restore and restore your system to the times before when the error started appearing on your computer.  A.m. run the restoration of the system, open Start, all programs, Accessories, System Tools , and then select the System restore option.  On the Welcome to system restore screen, select the restore my computer to a time option earlier and select Next.  In the Select Restore Point screen, select the date that represents the restore point to which you want to restore your computer back, and then select Next.  Finally, check and then click Next again to confirm your restore point and restore of the system.  Restart your computer when you are prompted, and then press OK to close the end of System Restore screen.

  It is important that you know that application errors can also occur because of virus or spyware infections.  In fact, the Spoolsv.exe process is also a known backdoor vulnerability which can be planted on your computer for malicious purposes by an attacker.  Therefore, if you see an unknown process running on your system, you must take appropriate measures to remove them.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Acrobat.exe - Application error 0xc0000022

  Can anyone help with this error because I think it is perhaps down to the admin rights? Acrobat.exe - Application error 0xc0000022

  Could be. Try to run the application as administrator.

  We sat, 27 Sep 2016 at 14:10, leew83235145 [email protected]>

• QuickBooks error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read".

  I am running Windows XP Professional Version 2002 w/SP3. QuickBooks Pro 2008 is installed on it. Whenever I close the program, I get an error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read". I have absolutely no idea of what that means. The message will only appear when it terminates the program and does not do. Any info is greatly appreciated.

  Hi stickman397,

  This error occurs during the installation of QuickBooks is damaged. To resolve this problem, follow the steps in the link below:

  http://support.QuickBooks.Intuit.com/support/pages/knowledgebasearticle/1008533

  Kind regards

  Imran M

  Microsoft technical support

• Svchost.exe - Application error. The instruction at "0x7d4caa9b" reference memory at "0x00000010". The memory cannot be: "read"

  Hi, I get the error message after my system boots - svchost.exe - Application error. The instruction at "0x7d4caa9b" reference memory at "0x00000010". The memory could not be "read".

  And then after a few minutes it stops and restarts.
  I'm also not able to use the mouse.
  I need help with this problem
  Thank you and best regards

  Hi GeorgeMotaung,

  ·         Did you do changes on the computer before the show?

  ·         Are you able to boot to the desktop?

  Follow these methods.

  Method 1: Start your computer in last known good configuration.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• Svchost.exe Application error - education @ 0x7c923845 referenced memory @ 0x00000000 could not be "read".

  error message - Svchost.exe Application error the instruction at 0x7c923845 referenced memory at 0x00000000 the memory could not be 'read' there are 2 choicesclick Cancel to complete that freezes the whole system must make a start/stop hard ouCliquez Cancel to debug and still freezes system. I noticed that I can move the notification almost window off the screen from the road and still be able to use the system, as long as I do not click an option in the error message window.

  I ran M/S FiX IT, M/S, Malware, Avg free antivirus essentials, Oldtimer, Iobit and nothing found something: of course these have not been loaded on the system at any given time. I'vd sought a malware, viruses, spyware, what is causing this and nothing

  How can I get rid of this? A malfunction of the malware/Adware/Virus/system or what it is?

  Hi stallman0419,

  When exactly do you get this error message?

  You can follow the steps mentioned in the articles below which deals with a similar question

  You receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box

  http://support.Microsoft.com/kb/927385

  You receive an access violation error and the system may appear to hang when you try to install an update from Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/927891

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• Lsass.exe application error application cannot initialize (0xc0000005). "

  "lsass.exe application error the application failed to initialize (0xc0000005)", on a XP Pro Dell desktop computer.

  I read all the answers to this problem.
  He left me confused.
  I'm not a guru of the PC (fair mainframes)
  I'm from the old school.
  I want to just fix this problem after trying all the F8 approach.
  I'm about to pay someone for everything again with a wipe HD and install OS up tp SP3.

  Or... I can jump to the 'other side' in total! (My son has never such problems with its Apple/Mac but only complained not enough software and comes to me so that he cannot find solutions.)

  I have studied this XP - OS on a Dell computer for a few days and now know enough to be dangerous.

  In addition, this problem appeared after you apply a few serious fixes MS?

  I don't know yet how to get the BIOS.  I'm not yet technically strong (but necessarily be).

  How can I download necessary patches with a white screen?

  I have never tried a reinstall of XP.

  I have the following CD:
  * Reinstallation CD MS Win XP Home Edition (SP1 included)
  (Currently up to SP3)
  * Application: To reinstall Dell Tools System Software
  * Dell Dimension Resource CD
   
  Dell has 2 partitions: C:\ (the system, Windows software, etc.) and D:\ (all my data, etc.)

  So... There you have it.   And, of course, would sincerely appreciate your help.

  And Yes... I am committed to give once I have something to give back.

  It's great to have someone on "this side of the fence!   (my son is still laughing - %^$#@!)

  trikericy,
  Unfortunately, there are several things that can cause this problem, including viruses.  Usually by pressing F2 when a Dell system is powered, you will have it in the BIOS.  But you may need to check with Dell for your specific model.

  If you are able to boot from reinstall drive and enter the Recovery Console, you can run the following commands to see if they will help to clarify this.

  Chkdsk /r

  sfc/scannow

  If the recovery disc provided does not offer the console recovery or these elements do not disable upward, then you can perform a factory restore to reload Windows.  You will need to check with Dell on recovery options they offer.  However, since you have 2 drives, it looks like all your data will be safe and it is only a matter of reinstalling programs.  If you do a factory restore, then I suggest updating Windows before reinstalling applications.

  Hope this helps out.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CS6 Master Collection CS6ServiceManager.exe - Application error: the application is not

  After you have installed the trial CS6 MC version I get CS6ServiceManager.exe - Application error: the application failed to start properly (0xc0000022). Click OK to close the application. This error message appears after opening any program in CS6

  Thank you for your interest,

  He had trouble downloading and not all programs have been installed correctly. It took three downloads and uninstalls cs6 to do things. The error message was popping up constantly and Premiere Pro would crash. I've narrowed the problem to Adobe Air. I uninstalled and reinstalled and the problem was solved. Moreover, the operating system is Windows 7 (64)

  Thank you

  Johnnyblas

• AccelerometerSt.exe - Application error

  AccelerometerSt.exe - Application error

  "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  It happened after trying to install the windows 8.1 update and my computer went to a black screen. It is in this State for a while and I had to go so I stopped it. The next time that I turned it on, the update had already completed and I had windows 8.1. Everything works well except for the error message that appears whenever I turn on my laptop. I have no idea of what he does, but when he arrives, it annoys the hell out of me. If anyone can help I would really appreciate it.

  In the menu is uninstall programs, 3D driveguard program it listed?

  If so you can try to uninstall it, restart, and then reinstall the program.

  The problem is definitely with this driver because what is the accelerometer is to have the program 3D driveguard Park the heads of the hard drive in case of bumping or dropping the laptop low rise.

  Unfortunately, I only got the drivegard 3D or ProtectSmart driver install and work, so I don't know what you need to do to clear this error, since reinstalling the driver did not work.

• Re: AccelerometerSt.exe - Application error

  Hello

  I just bought the envy 15 and used for only one day, the next day I get this error:

  Re: AccelerometerSt.exe - Application error

  Your quick help is very much appreciated.

  Thank you

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• Pavilion x 360: AccelerometerSt.exe - Application error

  From the start, I get the following error.

  AccelerometerST.exe - Application error - the application failed to start correctly (0xc000007b).  Click OK to close the application.

  My system shows now that he needs for the update but it will not complete the process.  No matter if I select shut down or restart.

  It started a few weeks ago.  What should I do about it?

  Hello

  Try the following.

  Open Windows Control Panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall - don't worry if you get an error at this point, just continue.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• Restore7.exe application error

  So, when I try to boot my windows, an error box will appear, who says:

  "Restore7.exe - Application error. The instruction at 0 x 77892591 referenced memory at 0 x 00008084. The memory could not be read. »

  When you click OK, the computer starts and get stuck on this same page. I can't go to HP recovery by pressing F11. Recovery CD no longer works. Operating system is Windows Vista Home Premium

  can someone help me please. This problem can be solved by buying new hard drive?

  There is the info from my computer. :

  http://support.HP.com/us-en/document/c01409678

  How are recovery disks does not work? If you insert the first disc into the optical drive, press any key shortly after turing on your computer, you should start the recovery menu so that you can fully recover your computer.

  In addition, this could have something to do with Windows Product Activation? If you have added the internal devices, remove them and make sure you unplug all USB devices. Just the mouse, keyboard and display connected when you attmpt to a recovery.

• Computer OFFICE-R4RAE96: AccelerometerSt.exe - Application error

  These days, when I open my laptop, it's show as "the application could not start correctly (0xc000007b). Click ok to close the application. Also the top of the box of dialoge showing AccelerometerSt.exe - Application error

  Hello

  You upgrade your Windows 10 machine? A few other members, including me had the same problem a few weeks back and in my case, I simply reinstalled 3D Driveguard software.

  During installation, it actually says software on my machine is more recent BUT the problem disappeared. Download and run the following software:

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71708.exe

  I hope this helps.

• HP 850 G2: AccelerometerSt.exe - Application error

  I have a 850 hp

  After installing quicken 2016 (I previously got quicken 2013) I now get the following error.

  AccelerometerSt.exe - Application error

  "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  can you guide me to fix this problem?

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall - don't worry if you see an error at this point, just continue.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• When I start my PC, and before you start I receive this message from InfoCenter.exe - Application error - the application is not initialate properly (0xc0000135).

  Original title: initialize 0xc0000135

  When I start my PC, and before you start I receive this message from InfoCenter.exe - Application error - the application is not initialate properly (0xc0000135). I just click OK and continue. Any problem? Is this necessary application?

  Walter Rodriguez

  E-mail address is removed from the privacy *.

  10/07/12

  14:57

  Hello

  1. do you receive this after you see Start button or entry?

  2 have you made any changes to the computer before the show?

   

  Method 1: Boot errors are fixed by the clean boot.

  Perform the clean boot and see if that helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  Reference: How to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  Method 2: Some malware parody itself as InfoCenter.exe, especially when it is located in the folder c:\windows or c:\windows\system32.

  I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  , Note 1: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note 2: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.