Reading problems, the camera, the media or the software

Similar Questions

• OK, I imported the files movie maker game cam and yet they you can read in the as fast forward spped, how to fix this pls__

  OK, I imported the files movie maker game cam and yet they you can read in the as fast forward spped, how can I solve this pls

  OK, I imported the files movie maker game cam and yet they you can read in the as fast forward spped, how can I solve this pls

  ===============================
  Might be interesting to try to convert the files in the
  format .wmv before you import it into movie maker.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• They have copied fine reading in the Panasonic and, fine, but do nothing in one of my Dell PC. Media player is my default player. End factory dvd work.?

  Recently, I copied some old tapes vhs to dvd (using a Panasonic dvd recorder). They have copied fine reading in the Panasonic and, fine, but do nothing in one of my Dell PC. Media player is my default player. End factory dvd work.?

  Hello

  Its probably an alignment problem - that is, the Panasonic is written outside of the
  able to read DVD computer settings.

  Normally, if you want to create CD/DVD that can play on standard devices (for example
  like the Panasonic) the MASTERED format should be used. Does the Panasonic
  offer a choice or formats? If the Panasonic uses MASTERED, then this is definitely one
  alignment problem. If the alignment can be defined in fact would cost more than the
  device being aligned (if you could find someone who could actually do).

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• When you try to set up my Tv Tuner in Windows Media Center, I get this error message: "TV Setup has encountered a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. »

  I have a HP m8034n pc with a tuner Hauppauge WinTV HVR-1600 NTSC/ATSC Combo.  The pc came with Vista and Windows media center worked great just with the tv tuner.  I upgraded to Windows 7, December 2 and fail to put in place my tv with WMC tuner.  The recorded shows that I had before the upgrade to Windows 7 appear and play without problem in WMC. I used the hardware diagnostic tool that is installed on my pc to control the Tuner, and during the test, I can see fine TV stations.  This unit is compatible according to microsoft Windows 7. I have the latest driver and tried to uninstall and reinstall. I ran Windows Update and everything is up-to-date. After that WMC checks tuners, it says:

  screen A___
  WMC has discovered the following:
  Analog cable (1 Tuner)

  Other tuners or TV signals were detected but will not be configured.
  (Show details)

  Is this Setup correct and complete?
  o Yes, configure TV with these results
  o no, show more options
  ________________
  When I click on show details, it is said:

  screen B___
  No TV Signal
  If a TV signal should be present, check your signal for following tuners connections and try again:
  Hauppauge WinTV 418 BDA Tuner
  ________________
  There is another question, because he does not list my correct tv tuner. I click, so I'm now on A screen again.

  When I click Yes, set up TV with these results,-(for the analog option Cable(1 tuner), I select my cable service is, and then click Next.) It then displays a confirmation of analog cable and my cable provider, I click Next again and the error message "installation TV met with a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. "appears.

  I even tried to set up the signal manually and on the confirmation screen, I click Next, and get the exact same error.

  I would really appreciate any help and if more details are required, please let me know.  Thank you!

  -Doug

  I don't know what happened, I left my PC off overnight and planned reformatting today. But I decided to give him another chance. Instead of saying the tuner was not available. He showed me a static snow image strong, as he was trying to use my Analogue tuner. In fact, it is supposed to use the composite input for my cable box. I re set my TV signals, and now everything works well again. Its strange because I reboot half a dozen times last night and it's never worked. Leaving the PC turned off for the night must have done the trick, I guess.

• Adobe still the software that is used to decode the media is not available on this system. install the correct decoders for the file you are editing can help fix the problem

  Hello

  I got this message after the import on ten H.264 files that I coded for Adobe media encoder.  "It is not available on this system from adobe yet the software that is used to decode the media. install the correct decoders for the file you are editing can help fix the problem. »

  The files that we have shot with HD cameras.  Edited in Premiere Pro CS3.  I installed the update 3.0.1 with always the same error.

  I also tried a new project and after about ten or so files imported into a timeline, the breakdown of the system.  I tried twice...

  Thanks in advance

  Please report to us. I don't know the exact specifications. for stills in still, the limit is 4000 pixels in the largest dimension for PrPro.

  Now, I must add that in PS. resizing algorithms are better, in my opinion, than those of PrPro and again. This means that there is nothing to gain and quality of untying, important images much larger than the size of the frame of the project, i.e. of 720 x 480 for NTSC SD projects yet. The size of the image will be the limiting factor, so scratch that.

  Even in projects PrPro, I resize to exactly what I need. If I will not pan on a zoomed image, I resize it to the size of the image of the project. If I move on a zoomed image, I resize just what I need.

  Good luck

  Hunt

• Problem of camera Chicony after Vista Ultimate upgrade on the Satellite A200 - 1CZ PSAEC

  Hey all.

  I recently bought a Satellite A200-1CZ (PSAEC). It has Vista Home Premium preinstalled. But I wanted to be able to connect to my domain at work, so for this purpose, I had to upgrade to Vista Ultimate. The update itself went well, but after the upgrade, I can not the built-in Chicony webcam to work again. I tried to reinstall the software of the camera without success.

  I also tried to plug the driver installation to the place on the PC where the drivers. He says that it is indeed the correct drivers, but there could be missing a post in the INF file. It seems that it must be written specifically for ultimate.

  Anyone got a few other pilots or maybe a solution to this problem?

  -Dan

  Hi Dan

  Please don't be angry with me, but why you n t search here in the forum first?
  Advanced forum search is the option to find related discussions this topic.

  I found this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24169&MessageID=88745

  Also, here is the solution to your problem
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=UK&from=search_service_options&FID = TIU00000038fc

  Greetings

• Reading from the sensor to LabView via rs232 or Subvi problem

  I'm quite new to LabView and not too experienced with instrument control so I was wondering if someone could help me to solve my problem?

  Currently, I'm using LabView 2011 and I'm trying to read pressure DualGauge of Pfeiffer (TPG 262) pressure sensor and display the readings of two pressure on LabView.  However, when I run my program, the pressure readings are not displayed - what is displayed are default 0.00 if same mBar pressure reading a reading of the display of the DualGauge probe.  To connect the sensor, I use a RS232 cable and have managed to find the device on my device manager, so I don't think that the connection is the problem (I've also seen the port appears in the Device Manager, when I connected the sensor via RS232 and USB in my computer).  I also use Subvi Pfeiffer in my code, and I suspect that the problem may be in there.

  Attached is my code and here are links to the manual of the DualGauge and the driver of the software LabView of Pfeiffer

  Double manual gauge - p. 23 and 68 are probably the only things related to the RS232 connection.

  http://www.idealvac.com/files/brochures/Pfeiffer_TPG262_Operating_Instructions.PDF

  DualGauge LabView driver - software Pfeiffer double gauge LabView driver 2009

  http://www.Pfeiffer-vacuum.com/products/measurement/activeline/measurement-equipment/OnlineCatalog.a...

  Any help is very appreciated!

  -Candice

  You have not tested really do anything. Devices and MAX Manager displays only the com port that you added to the computer. It does nothing to verify that an instrument is truly connected. You might have the wrong settings of com or the wrong type of cable serial (null-modem is required). I suggest that you start with program such as hyperterminal, PuTTY or MAX and try something simple. It seems that you will receive an acknowledgement returned by the instrument when a correct command is received. Make sure that this simple step that happens.

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• Common problem with Windows 7, what causes errors with itunes, the software adobe reader, TurboTax 12

  Is there a common problem with Windows 7, what causes errors with itunes, the software adobe reader, TurboTax 12?  I get error messages when I try to use one of these programs

  Hello

  Thanks for the reply with the details.
   
  Problem with opening PDF documents, please see the link and follow the steps in the article:
   
  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244#top
  Important: Disable your antivirus or changed settings can make your PC vulnerable to viral, fraudulent, or malicious attacks. Microsoft does not recommend that you disable your antivirus software or change settings. If you need to temporarily disable your anti-virus software, you should reactivate as soon as you are finished.
   
  See the link for the question with idevices:
   
  iTunes for Windows: "Could not load the data class" or "Cannot load provider data" alert synchronization services
  http://support.Apple.com/kb/TS2690
   
  Problem with TurboTax 12, check out the links and follow the steps:
  http://TurboTax.Intuit.com/support/IQ/install-product/reinstalling-the--NET-Framework/GEN12673.html
   
  5639 error: Cannot configure the product update system
  http://TurboTax.Intuit.com/support/IQ/update-product/error-5639--can-t-configure-product-update-system/SLN12386.html
   
  http://TurboTax.Intuit.com/support/IQ/install-product/Troubleshoot-installing-and-running-TurboTax--Windows-/SLN63018.html
   
  If the troubleshooting steps above do not help, check in a new user account:
  Reference:
  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account
   
  If it works in the new user account, then the current may be corrupt user account.
  To fix the damaged user account, follow the steps in the following article:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• I tried to convert doc to the pds.  He converted all the files in you folder to the pds.  The problem is that I can't open any files without buying adobe.   I can't unconvert so now I can't read all the files?

  I tried to convert doc to the pds.  He converted all the files in you folder to the pds.  The problem is that I can't open any files without buying adobe.   I can't unconvert so now I can't read all the files?

  Hi chrism43238735,

  May I know the process to convert Doc to PDF files. If you use Acrobat to convert the files, and then with the same application you open.

  If you used another process, in this case try using the Adobe Acrobat Reader application. Adobe - Adobe Acrobat Reader DC Distribution

  Thank you

  Abhishek

• Trying to open the message box appears 'lightroom has encountered an error when reading the preview cache and needs to stop smoking' Lightroom "Lightroom will try to solve this problem, the next time that it launches" OK when you press closed Lightroom an

  Trying to open 5 Lightroom, a message appears 'Lightroom has encountered an error when reading the preview cache and needs to quit' "Lightroom will attempt to solve this problem, the next time he throws" when OK key Lightroom quit unexpectedly and the computer returns to the office.  This persisted for 2 days and it has not set itself.  help please.

  Click OK close Lightroom.

  You must manually go to the location of your Lightroom by Finder catalogue / file Explorer and get rid of the Previews.lrdata folder

  By default, the location would be in Pictures\Lightroom folder

• I get a message saying Lightroom met an erorr when reading the preview cache and need to stop smoking. Then told that Lightroom will try to resolve thei problem the next time it starts. Never does. Tried to uninstall and reinstall but no good.

  I get a message saying Lightroom met an erorr when reading the preview cache and need to stop smoking. Then told that Lightroom will try to solve the problem the next time it starts. Never tried to uninstall and reinstall but no good.

  Sound familiar to anyone?

  Hello

  Please go to the save location of the Lightroom Catalog and here please delete the Lightroom Catalog Previews.lrdata folder.

  Now please open Lightroom and check if it works.

  Please let us know if it helps.

  Kind regards

  Tanuj Sandal

• Where I can I download a version of Acrobat Reader XI, the DC current version gives me problems.

  Where I can I download a version of Acrobat Reader XI, the DC current version gives me problems.

  You can try the full of Player offline Installer

  http://get.Adobe.com/reader/Enterprise/

• I had windows 7 and it has been updated to windows 10. After the update, I opened a PDF with adobe reader. The sign economy is idle. When I click on save slot, it is said that he can save a blank document. Earlier, I have not any problem to save a pdf d

  I had windows 7 and it has been updated to windows 10. After the update, I opened a PDF with adobe reader. The sign economy is idle. When I click on save slot, it is said that he can save a blank document. Earlier, I have not a problem to save a pdf document with adobe reader on my hard drive. I found no updates available for my adobe reader software. Is adobe still to make the drive compatible with windows 10?

  Govind B S

  Bernd, these rights are not necessary to the reader XI. Unless the file has been secured, then it should be savable.

  I recommend that upgrade you to the latest version of the XI player that is available and if this does not work, try to run a repair installation (or upgrade to DC).

• Help the Thinkpad x131e fingerprint reader problems

  Hi, I have an amd thinkpad model x131e 3372 runnning windows 7 and I have problems with the ThinkVantage fingerprint software. Whenever I try to register a fingerprint, I get these errors:

  

  I really need help. Its driving me crazy that I am not able to use my fingerprint to unlock my pc or check the passwords.

  Any suggestions are appreciated.

  I also have the x131e model 33722. It does not come with a fingerprint sensor, then any attempt to use the software would result in such a mistake. You might be confusing the middle button of the mouse with a fingerprint sensor.