Reading / writing in by vCO using network shares

Similar Questions

• vCO: write a file on a network share

  Hello

  I am very new to vCO and unfortunately I do not have experience in programming/scripting.

  The question I have is how to write a file/folder on a Windows network share in a scriptable vCO task?  I am able to write a file to a local directory, but cannot write to a network share.

  Code:

  file.createDirectory ();

  I already modified the file js - io - rights.conf to include the UNC path, that I want to write.

  I think it's a question that the vCO run the script in the SYSTEM context in Windows, but you allow it on a network share.  I tested by adding and removing the SYSTEM in a local folder.

  Any help is appreciated.

  Thank you

  Mike

  You will need to create a service account has network access to this network share. Re-configure vCO Server Service runs with the credentials of this account. After that, you should be able to do what you ask. I had this same use case on a project of the last year

• ESX 3.5: copy files using the service console from a network share to the esx host data store

  Hello

  I wonder. Is there a command that I can run the service console that would allow me to copy a file from a network share on the data store on the esx host?

  Eric

  If sharing is a Windows, you can also use smbclient within the service console and ride sharing.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Why Windows backup will not work on a network share?

  I am running Vista Home Premium and have a drive WD MyBookWorld NAS on a MS LAN.  OneCare used to do all my backups, never had any problem, but OneCare is no more.  I also have a NAS Iomega 2 TB hard drive and the problem is exactly the same for that too - XP and 7 can save on it, Vista can not.

  Windows backup works very well for readers SIN of my XP and 7 machines, but both the Vista, those who refuse.  I can drag and drop files from Vista to NAS, it's just the backup center who is the problem.  When I select the NAS drive for the backup on, he asks a user name and password.  My login to the Vista machine id does not work, and the administrator to the NAS password does not work.  The procedure fails with the 0x800706C6 message.  He refuses also backup on XP or 7 machines (with different messages).  He would be the backup on my other machine to Vista, but I do not have spare storage!
  I have read articles countless and tried to turn on/off control of accounts and mapping changes the network drive, without success - the error message, but does not go far.
  There is an industry on the internet trying to sell people PCHA (what is described as a Microsoft product), but I can't find any help on the Microsoft web site.  It is very bad, when the fault is so common.
  Help, please.  What should I do?

  Hello

  Windows Home Premium backup can't backup on a network location.
  So you will need to use an application of part 3. Professional, comprehensive and Enterprise edition
  backup to a network share.

  You can share files and use the 3rd backup XP to do or use Acronis or other
  party utilities.

  I prefer for the most of backup data and prefer to do it in a way that makes it easy to find
  and to restore a file as well as many.

  Replicator - free - excellent backup tool for backing up the data
  http://www.KarenWare.com/PowerTools/ptreplicator.asp

  I hope this helps.

• How to know the username of an account on a network share

  When I access a network share from another computer with windows Explorer, it tries to connect with identification information (current account & password or the credentials previously stored or depends on the settings of the remote computer as a guest), if not, it prompts for username & password (depending on certain parameters again). My problem is when I access a network share, I want to know my credentials (username) on the network computer.

  Is there any command or no way to definitely know what username I connect to a network share with windows Explorer?

  Original title: account in the network share

  Hi Aoikonomou,

  Thanks for posting your query in Microsoft Community.

  If I understand you correctly, you want to know the credentials of your system when you connect to a network share. I wish to inform you that all the names of login and passwords are supported by Credential Manager. By saving your credentials, Windows can automatically log in to websites or other computers. Credentials are stored in special files called vaults on your computer. Windows and programs (such as web browsers) can safely give the credentials in the vaults to other computers and websites.

  To know your Windows credentials, you can read the following steps to open the Manager of credentials:

  1. Press the Windows key + X.
  2. Click on Control Panel.
  3. Type "Credential"" " in the search bar and select credentials manager. "
  4. Click Windows credentials.
  5. You will be able to see the user names and password (hidden).

  In order to store passwords for automatic connection, see the following article:

  Store passwords, certificates, and other credentials for automatic logon

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• vDR (1.1) and backup on a network share

  Hello

  I want to install vDR backup on a network share, but wanted to understand the best practices for the network share and if it's OK for her, which will be presented on the virtual Center Server.

  Also, if I wanted to copy this network share broadband (for storage on the site off the coast) is this OK. Anything to be aware off the coast?

  I read a previous post and she suggested that I need to power of the vDR device, to ensure that the store of deduplication is not in use (no integrity checks / ongoing backups). Is this the case?

  Thank you very much

  If I save the Windows share on tape, outside the backup of vDR

  window still would be that I have to turn off power VDR or disassemble the

  Share?

  Yes, because other non-backup operations can still function.  This can cause issues of contention between VDR data and the application copies the data from the store of deduplication.

  Or, I was controlling access to the share (via command line /)

  changes of the authorization) to allow access during the backup window, then once

  the backup window is closed I remove permissions for vDR can not

  more access the share?

  Interesting idea - I had never thought about this.  Theoretically, it should work, but we have never tried on in-house.

  If I have limited access to the share on time would be the vDR go up automatically?

  I don't think so, you will have to do it manually.

  (b) If a backup, health checks or deletions where progress before a

  share has been deleted what happened to active employment? It initiates

  When sharing is restored? Any chance of corrupted data?

  There is always a chance that the VDR done at that point in time.

• Can we read/write client side files using UTL_FILE?

  Hi friends,
  
  We have no use in Oracle PL/SQL for file operations (create, read, write, add) on the client side? I have my server DB under GNU / LINUX, but I run my queries through a Windows machine and I want to precess files on my machine (client side) of Windows. Can achieve us through UTL_FILE?
  
  Thanks in advance,
  Deep

  UTL_FILE isn't for treatment side server only.

  You could write files to a network share of UTL_FILE, but that's all.

• Disk utility can not create large image of drive (60 GB) on the network share

  Disc Utiity (Versie 15.0 (1511.3)):

  I am creating a disc from a hard disk image. I want to save the image on a Synology DS414 network share.

  The share is accessible a there is no active disk quota.

  I copied a large file via Finder (384 MB) to the \\partagereseau that works.

  When I try to record a copy of disk sharing (60 GB), I get the following message:

  Unsatisfactory area is available on "(null)" to create the NAME of diskimage. Choose another volume with at least 60 GB of available space and continue.

  Summary: I can create large files on the share, but the disc utilities cannot?

  Greetings Wim

  384 MB is nowadays is no longer considered to be a file of "big."

  You don't mention how much space is actually available on the Synology but for arguments sake, we will assume that more than 60 GB of space is available.

  So in theory it should be possible to create a disk image of 60 GB (no doubt), there is enough space available. As you say there is no set of storage quotas and I'm happy to believe that. I think that the issue could be more to do with the maximum allowed size of the file, remember that I mentioned that 384 is actually not much, although some systems have a limit of 4 GB for a single file, for example FAT32 file systems have such a limit. In theory the FAT32 limit should not apply here because almost all including Synology NAS servers actually use Linux as the underlying software and so use Ext3 or Ext4 as file system, not FAT32. Same Ext2 a fortiori Ext3 or Ext4 allowing individuals will produce up to 2 TB of size which is clearly much larger than 60 GB.

  Still it could be related to that question even if it is necessary as an unnecessary and artificial limit may be for example to ensure compatible with other systems using FAT32.

  If you have enough space on the Mac, you could create and try to copy on the Synology, however another approach which is probably better all around is to create a "sparsebundle disk image. It's a disc image, but another type and will work around this problem because it is in fact made up of lots of all small files attached together. As that user do you see this as image a big drive, but the computer sees it as a folder full of files much smaller.

• All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  Additional information: the laptop is what I used to install all the music, via iTunes, which is located on the external hard drive connected through home network router.

  Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  Laughing out loud

• Unable to save pennies on network share

  A user has problems recording on a share network as follows:

  His iMac runs El Capitan. She opens a PDF of his email and stores them on the desktop. She manipulates using Adobe Acrobat and recorded on network. However, it is now to find that when she tries to do a save as on the network share, the button 'save' is grayed out. I tested with Microsoft Word as well, and the same problem occurs. Recently it started to happen.

  If she copy and glue the documents from his office on the network share then there is no problem, and I told him to do this as a workaround for now. It seems to be no problem with its access to the drive that it maps without problem and she can open and manipulate documents from there. As a test, I tried this on her personal network drive and again the "Save" button is grayed out.

  I suspect there is a simple resolution to this, but I was unable to reproduce the problem on my Mac Mini running El Capitan - I can't save slot for readers network without problem. I searched the forums but cannot see a solution.

  Someone at - it ideas?

  Solved.

• How to read the Serial Arduino data using labview VISA?

  Hi =). Im a beginner work reading data series from an arduino but im facing... Lets do it step by step

  I built a voltage divider circuit which gives from output
  from 0 to 5V. The output of this circuit is sent to a 0 analog input pin
  of a Committee of Arduino Duemilanove.

  (1) Firstly, I connected the cable to connect to my laptop USB the Arduino.

  (2) I went to start-> control
  Control Panel-> system-> hardware-> Device Manager. Check the Ports (COM
  & LPT). In my laptop I can see USB Serial Port (COM4). Now I know only in
  LabVIEW that I must read the data series COM 4.

  (3) to the side of the arduino, here's the code to read changes in voltage
  entered to analog pin 0. The last line of 'delay' determines the sampling
  Rate of how we want to taste the output of the voltage divider:

  int potPin = 0;    Select the input pin for the output of the voltage divider
  int val = 0;       variable to store the value from the probe

  void setup()
  {
  Serial.begin(9600) (9600);    Opens the serial port, establishes the rate of 9600 bps data
  }

  void loop() {}
  Val = analogRead (potPin); read the value of the voltage divider
  Serial.println (Val);
  Delay (10);
  }

  I slightly modified the basis series reading writing VI... I have
  attached the block schema used with comments. Basically, I tried to read
  data series, divide by 1023 and multiply by 5 to graphic voltage
  variations of the voltage divider circuit.  But Im not getting
  the correct voltage output values. The value of the tension just keeps go
  0 and coming again, as shown in the photo.

  Could you guys please guide me on what went wrong?

  Thank you!

  -you read the data, even if there is no data on the port. If 0 bytes are read => «»

  -in the case of false, you resources VISA wired for the output of channel tunnel?

  -There is no close VISA at the end of the VI resources

  -you're not a loop this VI reading bytes

  I added an addaption of your VI that you should give a try maybe

• Restoration of DPM on network share

  I use a Powershell script to restore a backup of DPM. I can get it to restore it to a local or a USB drive, but I can't seem to restore on a network share, no matter if the UNC path used or if I map it and then use the drive letter.

  Thoughts?

  Hi Jason,

  The Microsoft Answers community focuses on the context of use. Please reach out to the professional community of COMPUTING in the below link MSDN forum:

  http://social.technet.Microsoft.com/forums/en-us/dataprotectionmanager/threads

• Creating a batch file. How to open an Excel doc that is located on a network share?

  batch file that can access a file on a network share

  I'm making a batch file that starts several EXE as an excel spreadsheet that is located on a network share.

  exe start perfectly, however when I try to open the excel document, because it is on a network share, windows tells me that the CMD does not support UNC paths use... y at - there a way around this?

  the command I used was:

  CD "\\server\folder.
  Start "excel document.

  The way around this is to map the network folder to a disc and use the drive letter.
  In your case, it would look like this:

  NET use M: \\server\folder / persistent: no
  M:
  Start "excel document.

  When you are finished, you can unmount the drive:

  C:
  NET use M:/delete

  HTH,
  JW

• Get an unexpected error (0x80004005) while that try to browse network shares.

  I m using windows vista family premium X 64 bit version, I m facing a very strange problem, I can't browse network share on my network, when I try to browse to a network share, I got an unexpected error code (0x80004005), but another system in my network can browse share, I share from my windows vista home top.

  I check and confirm all settings, disable firewalls, to research on the internet for this solution. but "nt helped me.

  Present exactly the same problem. Windows 8 cannot find other computers on the network. Can ping the ip, but cannot navigate. Firewall disabled. Network discovery is on. Any ideas?

  UPDATE:
  Everything started working when I added 'Client for Microsoft Networks' to the list of items.
  Just click on the button "install...". "below and the customer selected in the list.

• Why my network shares keep duplication in 'My Computer'? I have Y and Z mapped to 2 different actions. From one day to the next, I have B - Z mapped without my fault. What is going on?

  Hello! I can't understand what this does to my computer. It seems that something is automatically re-mapping my mapped network shares. How can I even begin to solve this?

  The last major change to my system were:
  1 - installed Norton Internet Security 2011 (anti-virus, etc.)
  2 - decided to play with indexing in the Panel but I didn't not add Y and Z to the index. I didn't change the file types that are indexed using this tab in the window and check each type of file in there
  3 installed MacDrive 8 so I could connect my Mac USB keys, etc. and use them locally on my PC
  Thanks in advance!

  It was Norton Ghost. Norton Ghost tried to access a directory in one of the actions, but I had changed the location of this directory. He just started mapping and re-mapping the same actions over and over again. Weird! Then I opened the ghost, clicked in the menu Tools, then Options, then changed to something else by default backup destination. It's strange, but it does. I had not used this in over a year backup destination and have resorted to a ghost. Phantom decided not to change the backup destination by default, when I deleted my old backup job 'task' and made a new who had another destination of backup. Weird.

  Thanks for your good help.