READY FOR MOBILE BROADBAND

"" Option I just got my Thinkpad X230T with "mobile broadband ready. In the battery compartment, there is SIM location as indicated in the manual. I inserted a sim card from AT & T with dataplan, but the system does not recognize the card. ThinkVantage tools stated that there is no available WAN. Is the location for SIM card indicate that I WAN capacity or do I need another device to make it work? Help is greatly appreciated.

Welcome to the community.

I understand "mobile broadband ready" as defined by lenovo, you have installed the sim card slot and antennas required wwan, but... you do not have a wwan card. get a support card and you should be good to go.

HTH.

Tags: ThinkPad Notebooks

Similar Questions

  • R7000 as router with the router for mobile broadband Internet

    Hey guys. First of all, my apologies for my somewhat inadequate English skills. Secondly, I am brand new to the community, so apologies in advance for any fault :-) Third stop, apologize for having a complete beginner :-D

    So, for the issue: I recently bought a router top mobile broadband 4G (4 G MBR) to my apartment, because of the gap of strength and speed signal very low quality of the cable to the ground on my Street (fiber is to come next year).

    But the router provided by my operator isn't on par with my router R7000 Nighthawk when he comes to reach wifi, wifi speed, number of outputs of LAN and power of the processor.

    So, I want to use my R7000 my router, the internet signal from the air to the 4G MBR, then by cable to the WAN of the R7000.
    In other words; I want to just 4G MBR to simply pass / transfer the internet signal to my nighthawk R7000 router so I can use the R7000 as my router, LAN and wifi.

    How can I set this up?

    Thanks for your help!

    Update: the MBR has been no help at all. As far as I could tell, there is no possibility to bridge or pass-through mode. The R7000, as she does the work. I just put it in AP mode, adjust all the wired connections DHCP/auto IP assign and everything works great.

  • Adapter for mobile broadband to the T400

    I am looking for a card mobile broadband on T400 which I can use in US as well as in the rest of the world.

    Recommendations/suggestions welcome.

    Thank you

    For HSDPA the Ericsson and the desert of Gobi 1000 are more or less similar, but in addition, the GOBI1000 supports the EVDO

  • Slot Netbook Sim Toshiba NB200-12N for mobile internet

    Hi all

    I bought a Toshiba Netbook NB200-12N, and when I looked at the manual, it said that it had a Sim slot under the battery for the mobile internet.

    However, when inserted the Sim Card into the slot and switched the netbook on nothing happened. There are no options to choose for mobile broadband services activation or even no recognition that I inserted a Sim Card in the slot.

    I looked in all control panel system resources and for all the options for mobile internet using the Sim Card in the slot, but without a bit of luck.

    I am very disappointed that Toshiba has only go as far as showing you how inert to the Sim and remove it without tell you how to get it started and use it with success.

    Could someone please help.

    According to the specifications of the laptop your model has no 3G module and no slot for SIM card inside.
    Is clearly written in the manuals > some models.

    Sorry buddy.

  • ThinkPad X 1 carbon Type 3460 - Ericsson N5321gw / H5321gw Driver Mobile Broadband for Windows 10

    Hello

    I know that it is a well known problem but I still can't solve it

    I have 10 windows and my system is up to date but does not have the driver mobile broadband

    Even though I downloaded and installed the latest driver in Device Manager, it shows the following:

    The drivers for this device are not installed. (Code 28)

    There is no compatible driver for this device.

    I tried to change the compatibility of windows 7 and windows 8, but it still does not work

    Please advice

    Concerning

    Ali Elmeshmeshy


  • I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services.

    could not access vb run time for custom action script

    I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script.  Cannot install the Manager of mobile broadband services.  Any ideas?

    Hello

    I suggest you run the fixit and see if it helps:

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

    Also check out this link:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

    It will be useful.

  • HP mini 110 1046NR: looking for a module mobile broadband driver HP un2400

    In device manager it is a yellow! next to the HP mobile broadband module un2400. Anyone know where I can find the correct driver?

    Hello:

    See if it works...

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3688870&swItemId=ob_83605_1&swEnvOid=4052

  • Can I connect to mobile broadband, I have a 3 G SIM

    Hello

    I am in Europe.

    My X 220 has a SIM slot and is 'mobile broadband ready.

    It is, he has a built-in 3G modem? Or is "mobile broadband ready" refers to something less than that?

    I put in the internet broadband SIM in the phone (wasn't sure about the direction of the SIM card) and can not select the option "mobile broadband" in the form of the access connections from Lenovo, in the box ThinkVantage tools.

    Thank you!

    Eoin

    Eoin wrote:

    I have already installed a drive mSATA under the keyboard.

    Just to be clear, it is a different connector for PCI Express Mini Card Slot, right?

    The slot when you install this player mSATA is also the internal WWAN slot... Unfortunately you can't have 3 G internal and mSATA simultaneously.

    See you soon,.

    Bill

  • Portege R700 - cannot activate the top modem mobile broadband

    Hi all!
    I have a big problem with my Portege R700 with Broadband Modem built-in.

    I installed the laptop with the Original CD recovery with Win 7-64 bit - all works well but if I press FN - F8 I only activated wireless and Bluetooth but noch Mobile Internet Modem Mobile Broadband is not displayed in the hardware Manager.

    Where the new driver for FN Options?
    How is the correct name of this option?

    I tried to install all the drivers I found here: https://aps.toshiba-tro.de/wlan/?page=3gdownloads

    None of them worked! I did a clean install, once again - no modem, indicated in the hardware Manager.
    He worked perfectly but after the installation of the new 2 weeks no chance.

    * Issues: *.
    *.) don't see a modem mobile broadband in hardwaremanger *.
    *.) FN F8 show no option to activate the modem

    Help me please - it is an urgent problem because I need this laptop for businesses. :(
    KR
    Philipp

    > do not see the modem mobile broadband in the hardware Manager

    The question is: did you buy a Portege R700 with a module 3G?

    I m asking because different Portege R700 were released with different specifications.

  • Tecra A10 - 15 c PTSB1E - no modem Mobile Broadband

    I'm looking for help with my problem of internal modem using Wireless Manager 5 (5.2.1047.69).
    I had a problem a week a go that the operating system (Windows XP) has been altered.

    In the meantime, I could not open Wireless Manager 5 (with a message that "no modem Mobile Broadband" and there are other programs that have been affected.) A recovery process was undertaken which included deletion of all programs and re - install.

    The modem worked for a week and I now have the same "No Mobile Broadband Modem" message again.
    I used the modem dongle external vodafone which work currently, but here the restoration of my internal modem.

    Can someone help, please?

    Is the Wireless Manager 5 Toshiba application? I don't think so.
    So if you have problems to use non-Toshiba applications contact producer software and support.

    One more thing: all of the time that you write on the modem internal. What type of modem is?
    As far as I know for its use if internal laptop modem you don't need one Director or another piece of software.

    To be honest, I feel the whole issue has nothing to do with Toshiba.
    Have I misunderstood something?

  • Portege R830 - forcing mobile broadband using 3 G/HSDPA with Win 8

    Hi all

    Updated my Portege R830 to Windows 8 without problem.

    Given that most of the Wireless Manager functionality has been moved in the Windows, I can not find where I can "force" the connection to 3 G/HSDPA.

    I live in an area where the signal is insufficient and if I let the network default settings, it frequently goes to the strongest EDGE connection. I connected with Wireless Manager, using only 3 G/HSDPA where 2 bars were sufficient for everyday tasks.

    Moments of light bulb? (Travel is unfortunately not an option... ;))

    Hmm, I think that this parameter isn't available in 8 Win.

    Microsoft provides a nice article on configuring broadband to help to win 8 and mentioned configuration isn't it:
    http://Windows.Microsoft.com/en-us/Windows-8/mobile-broadband-from-start-to-finish

    From my understanding the best signal to broadband will be selected and used if it is available.,.

  • TOSHIBA f3507g cannot connect to mobile broadband from 3G (error code 0)

    It's really a strange situation. Yesterday I installed the latest 3GRF POWER UTILITY and driver F3507g 3 G then inserted the SIM 3G, my laptop can connect to the internet (HSPA) normally, but today when I download and install the latest software WIRELESS MANAGER in others to check data and texting, but now my laptop cannot connect to the 3 G network but that laptop still the 3 G signal. I also tested for texting on my phone and it works but connect to the 3 G internet is impossible. I tried to uninstall all the drivers of 3G and reinstall it again, but it does not work. When I cheking troubleshooting, he said that "the operation of network connection mobile broadband failed with error 0". I use win7 and download the driver 3G [http://aps2.toshiba-tro.de/wlan/]. Please help me, thank you very much!

    Hello

    What operator and SIM are you using? It works if you connect through the Win7 built-in connection manager? That is to say through her view available networks?

    Since you are able to receive text Messages, you can register properly to the network. This should be a profile/network problem. It works if you create a manual Profile Manager wireless with the correct settings for your carrier?

    It works if you use square DUN? See Howto on http://aps2.toshiba-tro.de/kb0/HTD9802OF0000R01.htm

  • Portégé A600-122: Wireless Manager 5: no Modem Mobile Broadband

    I use the Vodafone SIM card in the slot mobile modem of my Portege A600-122. Wireless Manager 5 can't find the modem. Status message: no Modem Mobile broadband. Using Version 5.2.1047.46 driver 5.0.1047.15 with Prof. XP SP3.

    Any ideas what could be the problem?

    You have the drivers loaded in Device Manager? For example you see all references to F3507g in Device Manager?

    Is the message even if you have installed the latest drivers and Wireless Manager 6 http://aps2.toshiba-tro.de/wlan/?page=3gdownloads

  • 5901tw flow 8: [Please help] unable to connect to 4G network card, driver missing HUAWEI Mobile Broadband Module

    Hi all

    I just bought 8 streams HP 5901tw 4 days ago, yesterday, after internet connection using my card of 4G (WWAN driver) in my Tablet 8 Stream, suddenly the internet connection dropped and I lost my 4 G network card. I don't know why it happens by itself. But for connection Wifi still works well and wifi interface is always detected in network adapter but 4G is missing from the list.

    In Device Manager I see list of pilot missing in other devices-> HUAWEI Broadband Driver Module is missing from my Windows with Bing 32 bit OS 8.1. I try to find the driver through windows update, website of hp or other sources, but is not found. I also tried to update the BIOS firmware to the latest version and upgrade of such software firmware driver LAN, etc. from the HP Web site, but still can not fix missing pilot of the HUAWEI Module of high speed.

    I also try reboot several times, making recovery, but still having lack of driver for HUAWEI ADSL Module.

    Last effort, I try to current level Windows 8.1 to Windows 10, but still no conclusion success lack driver HUAWEI or fixing my 4G network missing question.

    Now I can still connect to the internet with my 4 G card more every trip.

    Someone there solution and how is address/where to download those missing 4 G network driver (HUAWEI ADSL Module) 8.1 for Windows or Windows 10 HP 5901tw 8 streaming?

    Really appreciate for any help and answer including HP support.

    It's really annoying to have this problem and get stuck without a solution. I just enjoy this new Tablet HP for 2 days and now unable to connect to the 4G network more.

    Thank you.

    Kind regards

    Wachyu

    I finally found the problem with the HUAWEI ADSL Module in my stream 8 HP (after 2 days of sleep trying to install and uninstall the driver and try all options).

    It seems maybe some Windows Update or a driver is trying to change the firmware inside the card top debit MOBILE HUAWEI to download mode (VID:12 d 1 PID:1568), so it can't use any driver installed in point 8.1 of Windows.

    I tried to manually change the download mode inside the HUAWEI tools firmware: Revskills (B. Kerler credit) return to the standard mode and then reset, then the Device Manager will detect again under the new material in NIC as HUAWEI Mobile Broadband Module (VID:12 d 1 PID:1570) and automatically installed its driver from Microsoft.

    VOILLAA, My Mobile Broadband can now be re-used to connect to Internet and now also presented in the connection.

    A lot of delicate here to force Windows using HUAWEI driver to use the COM Port to communicate with the card mobile broadband HUAWEI inside and then using Revskills tools to change the mode to return to standard mode.

    If someone knows this problem and wants my help, just ping me and I'll be happy to help you in the orientation.

  • Satellite A100 - BT mobile broadband

    Here's an email from BT, I just can't get their mobile broadband services working with my Satellite A100

    Hi Mr J Cairns,.

    further to our conversation regarding your problem with Broadband BT's Mobile on Windows 7, we have concluded that the fault is caused by its windows 7 autonomous, there seems to be a problem with Dial-up networking on the computer, our software indicates that there is a problem with the "Remote Access Connection Manager service" and try to manually start the Service generates an error about its dependencies.

    My only suggestions to solve the problem is to contact your PC vendor for diagnosis or to perfom a factory restore on the computer, the provider of your PC will be able to help with this, we will contact you in a few days to see how you have progressed with the question and if the advice I gave helped resolve the issue.

    Any advice appreciated

    LOL :) such emails are very usual for service people who don t know what the problem could be it of very simple for someone point to the manufacturer of the computer and computer question s say.

    Can I ask you what problem do you have?

    I assume you are using a 3rd party Bluetooth modem and are not able to install Win 7 usign?
    Am I wrong?

    Why this should be a laptop problem?

    As mentioned in your message, the question could be between BT and Win 7 modem.
    In my opinion the BT modem manufacturer should provide you with assistance.
    There may be some problems between BT and Win 7 modem configuration?
    Who knows.

    Are you able to connect other devices BT the A100? Yes? Well in this case, the battery of BT is installed correctly.
    Otherwise I would recommend reinstalling the BT stack and set it up again.

Maybe you are looking for

  • Checking the time of calibration

    I have a requirement to perform a daily calibration of an instrument on a daily basis.  Time of calibration should be configurable by the user.  So what I've done is created a menu item which allows the driver to control the time of the user.  In add

  • How can I activate my wireless adapter?

    My router works, but I can't connect! I was using my laptop when it is disconnected. I have a signal strong!

  • Win 7 material new indicator tx2050ep

    Hello I have a HP TX2050ep and install windows 7 Professional x 64 in. HP has yet to all the drivers for it. Windows 7 is still signaling with a sound as he had found a new material or I just pluged in a pen. Nothing happens. It's just noise. It's an

  • For some reason any everything suddenly I can not export from lightroom to JPEG

    My desktop computer is fairly recent.  I was able to use lightroom and photoshop and able to export raw to JPEG without any problem until a week ago.  Lightroom allows me to edit, but when I choose to export it freezes for some reason any.  So I had

  • How to add the delivery address to a profile?

    HelloHow to add a delivery address to a profile? Can we add using ProfileFormHandler shipping address? I googled a lot but has no solutions. Also the ATG docs aren't useful. But I see a Web Service Guide to add Oracle ATG Commerce Web address - add a