ReadyBoost isn't available because sysmain is disabled

Similar Questions

• Error, program cannot be started because it is disabled, either because it has no enabled devices isn't associated

  I get a message saying that the program cannot be started because it is disabled or because it has no enabled devices associated with it - what it means and how to fix this?

  Hello

  ·         Since when are you facing this problem?

  ·         Remember to make changes to the system until the problem occurred?

  ·         This problem happens for all programs and services or program individual or service?

  Method 1:

  It sounds like this the file associations on the computer are not set correctly.

  See the below Microsoft article available tool and run the fix.

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Method 2:

  This problem may also come from Virus/Malware infection on the system.

  I suggest you to run the Microsoft Safety Scanner and check if that helps resolve the issue.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Note:

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

• Camera is not available because the SD card is mounted on a PC. Unplug the USB cable to move forward.

  I tried to download pictures from my phone.  She does not quite sure why, but the main problem is I can't access my camera or the photos on my phone now.  I get messages like this:- camera is not available because the SD card is mounted on a PC.  Unplug the USB cable from proceed.  I have tried several things and finally just manually disconnected the cable, but not luck. and now also message as follows:- your content is not available because your phone is used as a USB storage device.   Disconnect the USB to access your content.  Would appreciate help!

  Hello

  1. What is the brand and model of the phone?

  2. have you been able to access (or discovered) files on the computer?

  3. what error do you get when you try to copy files to the computer?

  4 you did changes to the computer, before the show?

  Method 1:

  Check out the following link.

  Tips for solving problems of USB devices

  Method 2:

  Connect the phone to another computer and check.

  Method 3:

  Check if the phone includes settings to disable the USB connection.

• I can't access the power options, it keeps telling me "your power plan information isn't available. access denied. "

  SO CONFUSED!  Administrator account... access denied... why?

  I'm the only user on my laptop and I have an Administrators account, but it won't let me change some settings. I can't access the power options, it keeps telling me "your power plan information isn't available. access denied. " How is this possible since I am the administrator? Seriously... can im confused anyone help me please?

  Is the action close cover one of you are denied access to that?

  This can happen if there is management of a manufacturer of PC running electricity and it has been reported in some Samsung netbooks & others.

  If so, find the 'utility' Samsung Fast start in Samsung program files [in the start menu, all programs files].  Start it and select Disable.  If this option does not exist then just uninstall it in the Control Panel, programs & features.  You will gain full access to your power options & lose anything that this utility does not have one thing that you can't do it yourself.

• HSDPA, if 4G isn't available, then do not say H +.

  Can someone tell me why my Atrix always H + when its clearly related to 3G?

  Can someone tell me why, if I connect to the HSDPA network then I get no internet connection and it does not have 3G? How am I supposed to know that 4 G is available, if it still says H +, and I can't keep it on this network? If 4G isn't available it shoud say H +... Right?

  It is only yesterday that I discovered that I was not on the 4G. This seems very misleading!

  Thank you

  CobyMac

  
  

• I installed in my laptop XP - SP3 PersonalFirewall of Privacyware and I have this problem: when restarting, always internet access isn't available (WiFi/LAN).

  network adapter AutoDetect fails

  Hello:

  I installed in my laptop XP - SP3 PersonalFirewall of Privacyware and I have this problem: when restarting, always internet access isn't available (WiFi/LAN).
  Using the command ipconfig, I found that these cards are not detected. (Although without wireless/LAN icons do not display the modem connection). Also, if I go into Device Manager, I see network cards. BUT if I select "research material changes", then the other adapters will appear (those of Privacyware) and internet connection is reset and it will work then.  I wonder why windows does not detect this kind of cards automatically when I start it.

  This problem occurs only in my laptop - I installed the project Feederwatch on a laptop another XP and it worked, so Privacyware cannot provide a solution, since seems a very specific problem.

  Thanks for any idea!

  Seems that the solution was:

  1 - Open Device manager and view the hidden devices.
  2. then go into not connectable & play devices and manually delete all the remainers network software & security uninstalled (process antivirus, firewall, monitor).
  3. several reboots were required in order to know if the garbage problem has been removed.

• Updates are not available because the process is not running

  On YouTube, I get a message that "updates are ready for Vista".  I tried to go to "updates" through Windows, but I get a window that says "updates are not currently available because the process is not running". "You may need to restart your computer.  The box has a red shield with a white cross in it.

  Hello

  What do you mean when you say that you get a message in YouTube?

  I'd like you to try the answer from here-

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/Windows-Update-service-is-not-running/a2f7bd08-5f24-4DFA-818B-78ed2aaa48c8

  Thank you.

• "The service cannot be started, either because it is disabled or it has no active device is associated."-message I get what anyone who use only request password

  I had problems with my computer and trying to understand what was going on... I changed file permissions and how some

  the services are started.  Now I can't do anything. ..... This allows for standard user password. Now he is not even asking me password more. It just does nothing. Same thing if I try to run as administrator, nothing happens now. Even when I'm with a Director profile I can't do anything that would require only a password before.
            
  I get this message instead: "could not start the service, either because it is disabled or it has no enabled devices associated."
  I'm locked out can do whatever it is administrative. If anyone could offer any suggestions, I would really appreciate this has been driving me crazy.
  
  Thank you, Scott.

  Hi Scott,.

  1. is it impossible to run any program?

  2 - is the only message you receive?

  3. which files do you have change permissions?

  4. remember the services for which you have made changes?

  5. what questions initially face?

  This problem may occur if the service is disabled. To resolve this issue, try the following.

  Method 1: Search for services.

  a. click Start type services.msc and press ENTER.

  b. double-click the service that is not started.

  c. click the log .

  d. check that the service has not been disabled.

  e. click on the general tab, verify that the service has not been disabled in the Startup Type box. If Yes, click Automatic to start when you start the computer.

  Method 2: Perform a system restore if you have made any changes recently. Refer to the following.

  What is system restore?

  System Restore: frequently asked questions

• Windows backup error the service cannot be started, either because it is disabled or because it has not enabled 0 x 80070422

  I tried to understand this and have failed so far.

  Using the Control Panel, system and security, backup and recovery. Click the backup set,

  Pop up - select where you want to save your backup. I select the 4 TB drive that I just

  put in my system (and the recommended player). I click Next, and then select Allow me

  Choose and click Next. The next window - what you want to backup? Data files are already

  selected by default, and then I select the disc Local (c), include an image of disk system: EFI system

  (C) partition is already checked by default. Click on next, the next window - see your back to top

  settings, click on save settings and run the backup and that's what I have.

  The service cannot be started, either because it is disabled or because it has not enabled

  associated devices, (0 x 80070422

  I checked the services which apply to Windows backup and tried the auto configuration instead of

  Manual.

  I tried this search on the Internet and so far all I've found is not

  fixing the problem.

  Original title: set up backup Windows does not.

  Thank you for your help. I fixed the problem I had. It was caused by the settings in the

  Samsung magician optimization settings. Recently, I had put in a Samsung SSD EVO 850.

• The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  When I try to open security as Malwarebyte Anti-Malware programs or open Control Panel, security, device management and several other items in the Panel I get the message "the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him."  I started windows in safe mode and ran Malwarebyte Anti-Malware and McAfee and a Trojan horse has been deleted, but I still get the message on several applications when I try to open them.  I tried to set up another account, but when I go to the Panel, user accounts and family safety and try to select Add / delete user accounts, I can't seem to open.  When I click on it nothing happens.  Any ideas would be appreciated!

  Virginia lace:

  I finally solved the problem - I went in Safe Mode W/Networking and then on Windows Installer and Windows Installer of Module (and other things as well as unforunately that I remember).
  In any case - if worse comes to the worst, go to Mode safe mode w/network and pull up your Windows Services, then just turn each window / Microsoft service on which you can (set to start automatically) - orrat less start with Windows Installer Windows Installer of Module and see if that solved the problem.

• My cdrom is not available because system32\drivers\cdrom.sys is damaged.

  My cdrom is not available because system32\drivers\cdrom.sys is damaged.

  http://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/9e694df5-05cf-4C89-b7d2-7ca138e55a90

• The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him. (0 x 80070422) attempt to run the Windows backup utility.

  I get this message every time I try to run the Windows backup utility.  All the services are rundning according to the instructions of Microsoft experts on the same issue.

  Original title: the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him. (0 x 80070422)

  Hi Charles,

  Welcome to the community Microsoft and thanks for posting the question. I'll certainly try and help you perform the backup.

  Until we start could you give us some more information?

  1. Since when are you facing the issue?

  2. you have any anti-virus installed on the computer program?

  3. What are the troubleshooting steps correct you have taken to correct the problem?

  4. are you aware of any changes made to the computer before the show?

  I suggest you to re check the service as long as this error usually occurs if one of the services required for the backup Windows for work is disabled or has not started.

  To check the services, click Start, in the Start Search bar type services , and then press enter.

  Please check that the following services are enabled:

  -"Remote Procedure Call" (RPCSS) must be active, Automatic.

  'COM + Event System"(System events) must beactivated en, Manuel.

  -'System Event Notification Service"(SENSE) must be active, Automatic.

  -"Volume Shadow Copy" (VSS) must beactivated en, Manuel.

  'Microsoft Software Shadow Copy provider' (SWPRV) must beactivated en, Manuel.

  Once you make changes according to the above specifications, you can try a backup and check to see if that solves the problem.

  I also suggest you to run a SFC scan (System File Checker). This will replace the corrupted Windows files.

  Here are a few articles on Windows backup.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Hope this information was helpful and let us know if you need assistance in the future. We will be happy to help you.

• Error code 797: connection is not available because there is a problem with your network card or modem

  I have a Windows 7 laptop. I use broadband (DSL) to connect to the internet. Lately, I have an error with the code 797. It says connection is not available because there is a problem with your modem or network card. I have a Sony Vaio e series laptop.

  Hi Muffakham,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem that you are unable to connect to the Internet and receive "Error Code 797 connection is not available because there is a problem with your network card or modem".

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.
  Did you the latest changes on the computer before this problem?

  This problem may occur because of damaged or incompatible, drivers connection settings incorrect network, hardware or software problems and missing updates.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Method 2:
  If the problem is not resolved, I suggest you try the procedure described in the article and see if it helps.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check out the link for more information.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know the status of the issue after you perform the troubleshooting steps. If you need information about the problem with the connection to the Internet or get help, I'll be happy to help you. We, at tender Microsoft to excellence.

• 80070422 ERROR_SERVICE_DISABLED. The service cannot be started, either because it is disabled or because__it has no active device is associated to him.

  Just bought a HP Pro Book 6440 with Windows 7 installed.

  Problem with windows Defender.  Cannot be enabled after a pop up.

  Code: The service cannot be started, either because it is disabled
  There is no active device is associated to him.

  Windows security systems cannot be turned on.

  Also get Automated request

  Message on google: your query looks like automated queries of a spyware application.
   
  blocked warning Spyware navigation

  We recommend that you scan your computer against viruses and spyware immediately and remove any suspicious software found.

  I use Kapersky 2011.  No problem scanning every day.  Programs spyware downdload no change.

  Now after a week impossible to surf the internet or google whatever it is or view facebook pages.

  Tried many things.  Help, please.

  Hello

  Perform the following steps and install automatic updates and then try to turn on the firewall.

  Run an online scan to check any virus or any other malicious software:

  http://OneCare.live.com/site/en-us/default.htm

  Run as Administrator Security Center:

  http://Windows.Microsoft.com/en-us/Windows7/understanding-security-and-safe-computing

  Perform the following steps and update the computer:

  (a) click Start, type Notepad in the start search box, and then click Notepad in the list programs.

  (b) copy the following text, and then paste the text into Notepad:

  start wuauserv sc config = auto

  SC config bits start = auto

  SC config start = auto DcomLaunch

  net stop wuauserv

  net start wuauserv

  net stop bits

  net start bits

  net start DcomLaunch

  (c) click file, click Save as, and then type Repair.bat.

  (d) in the file type box, click all files (*. *).

  (e) in the area save in, click Desktop, and then click Save.

  (f) on the file menu, click on exit.

  (g) the right - click on the Repair.bat file that you saved in step 5, and then click Run as administrator. This action starts the required services. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  (h) try again to install updates. If you install the updates, delete the file Repair.bat. To remove the file Repair.bat, right-click Repair.bat, click on remove, then click Yes.

  Try to start Windows Defender after these steps.

  Thank you, and in what concerns:
  Naman R - Microsoft technical support engineer.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot connect to the local file and print when the domain controller is not available because the network connection

  Hi all
  Having problems for local users, connection to a file and print server in one of my satellite offices.
  When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
  The domain controller is off site in my main office.
  Environment:
  All local desktop clients are windows machines 7.
  Printing and local file is a windows 2003 server.
  DC is window 2008
  Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
  Any help or thoughts would be appreciated.
  Thank you

  Hello trj'hwma,

  Thank you for the question!

  It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.