ReadyComm

Similar Questions

• "looking for credential tiles" - unsuccessful removal of Veriface and ReadyComm - HELP :(

  Hello

  I did some research and tried and called and did everything, but can't seem to get my Lenovo to play nice.

  I bought this computer only a month or two before and have placed since my materials of the entire work here so a total rebuild of the system's very unnatractive.

  My main problem is, when I put up Outlook 2010 (expensive full version) with my exchange account that is hosted by Go Daddy (who were very patient with me and all my calls - it was also the expensive full version and all settings have been checked several times so it isn't a fault it), if I config it automatically or manually , the "Windows - Microsoft Outlook security - connection to [name]@[domain].com - looking for credential tiles]" pop box and will not die.

  I have read the forums and I saw that people had success uninstall (or the less disabling) ReadyComm (which was very difficult to find, but I did) and VeriFace I went and made through Control Panel.

  I restarted my computer and VeriFace has obviously not been eliminated, and the message of credential tiles was always there.

  I started my computer in safe mode, fact the msconfig and c:\programdata steps, actually purchased a software that promised to help me remove programs during good behaviour and all nothing is helping.

  I'm at the point now where I just want out of here, all programs from Lenovo (even if I'm afraid of the stuffing something upward) and all the downtime of not being able to use Outlook correctly (and trying to uninstall everything) drives me crazy.

  I actually did call to Geeks2U services, and even they couldn't fix it.

  Why is it so difficult to get around this? How can I make without a comprehensive re - build? Is there anyone out there?

  I do some reading in the tiles credential... my apologies in advance, as I'm not familiar with windows key rings.

  It seems that your research is correct: VeriFace interferes with the authentication system.

  Have you tried to reinstall VeriFace from the site, so that you can do a complete uninstall of it? If this does not work, could you post the errors that occur in your event viewer? There could be an indication as to where the authentication will fail.

• ReadyComm 4.0 for Windows Seven?

  Hello

  When you try to install the software ReadyComm 4.0 under my Y530 and Windows Seven x 64 professional French, it fails when using or not mode compatibility.

  Y at - it a newer version or could wait for the official launch of seven have final software?

  Best.

  Dear Sir or Madam of the etm74190,

  You don't need software ReadyComm with Windows 7.

  Windows 7 does a great job of connection to your network wireless or wired in itself.

  6thSense

• Lenovo Ideapad Y450 switch wireless works not

  Hello

  I bought an Ideapad Y450 is about 2 weeks and for the first time I tried to use wireless, it did not work. There were other additional software that I added such as Firefox and microsoft office 2007 at the time wherever I checked the wireless feature. Ichecked the on Device Manager (Intel WiFi Link 5100 AGN) network adapter and it seemed to work fine.

  Later, I uninstalled the ReadyComm 4.0 software and internet Norton Security. I switched to AVG Antivirus. For some reason, the front switch and the Fn + F5 started working and I was delighted. Unfortunately, the next day, the wireless radio just stopped working. The front switch and the shortcut (Fn + F5) no longer work. I called technical support and asked me to reinstall the driver for the network card - did not work. I rebooted the computer on safe mode - didn't work. I guess something must have been installed automatically via windows update.

  I'm trying to avoid having to use the recovery key to activate the computer back to the factory settings (I did not a recovery yet disc).

  I hope that someone has experienced the same thing before and could help me.

  I could understand not just what prevents the computer to turn on the wireless capability. I know that the switch works because one day when he did. Or is the switch just partially broken?

  Thank you very much for all your suggestions. I should have updated all the you what happened to my laptop. What I did about a month and half ago was so I used the one key recovery option offered by Lenovo to restore my laptop to its factory settings. I lost all the software that I installed in my laptop, but it was worth it. My wireless and bluetooth works now. I can turn them on and off. The switch works. The Fn + F5 shortcut works. I backed up all my files until I reinstalled my whole hard drive so that the process was not too painful for me.

  Right now, I have Lenovo ReadyComm 4.0 in my computer and in some sort, it has not been any problem with my wireless connection. If all goes well it will never.

  Thanks again for your help!

• Lenovo G550 will not let me activate wifi

  I have a problem with a G550 laptop, running windows 7.

  No matter what I do, the wifi does not work. When the manual switch on wifi on and I press fn + f5, nothing happens.

  The wifi card is recognized in windows, I have the latest drivers Lenovo support page and so on.

  I tried literary everything, including windows reinstall and still nothing.

  When I run windows diagnostic said it also "options wifi (or something like that) is not activated" and I tried with readycomm that says the same thing.

  It's actually sort of a hardware defect?

  Remove readycomm application. Then, restart your computer.

  Re - install power management, and then press fn + f5 to activate wireless.

  

  do you not see any window like that?

• Equipped with mobile broadband with Lenovo B560 / SIM card / no reaction if pushed SIM card

  Dear Forum

  I have byued "nine" one lenovo B560 - quiet price specifications.

  But now I'm trying to connect to internet with my SIM mobile broadband WebClient and do not find a way to do it!

  The laptop is equipped with a SIM-Card-Slot-In card and throug this Slot I can see some golden conectors.

  But if I turn on wireless with [Fn] + [F5] I can't see the WLAN on/off switch card.

  Even the installation of 5 ReadyComm has not resolved my probs.

  My mobile is Win7 home premium with the typical standard configuration, no change.

  Is there something that I did not?

  I appreciate any help, thanks in advance!

  Greetings - sand

  Hello mate,

  It's not because you have a card reader sim you have a modem installed inside.

  If your laptop is wwan ready, it comes with the sim card reader and installed antenna, and that's all.

  If you don't see the wwan modem in the Fn + F5 menu it is probably because you do not have a modem.

  Take a look here to see if you have a wwan modem or not: http://consumersupport.lenovo.com/us/en/configuration/configuration.html

• Idealpad Y430 is unable to connect to wireless internet

  I just bought a new Idealpad Y430 but cannot connect to the internet via my wireless network. It works with a cable connection. My other laptop works very well with the wireless connection. Can someone help me solve the problem

  You must uninstall program "Lenovo ReadyComm' of your Y430.

• Small question wireless - IdeaPad Y730

  Hello. I just recently received my Lenovo Y730, Vista Home Premium x 64, in the past few days and it works perfectly, alternative for a small hiccup. It is more than an inconvenience, but I am wondering how to fix, or what goes wrong in general.

  I have connected to my router wireless very well, but get shut down or restart? When it comes on the next time it seems have unchecked the "automatically connect" box and turn on automatically when I connect. I have re-checked several times and each time it automatically reconnect.

  Any ideas on the problem? Or a solution? I'll try things with the router itself, but it doesn't seem like it's the problem for me. Can be so bad.

  Your computer comes with installed ReadyComm? If so, try to uninstall it and use Vista built in Wireless Manager.

• Y430 wireless network connection

  Everyone has the same problem I am having with this model? Connect to a wireless router is such a problem, that is, it connect and disconnect as soon as I try to connect to the internet. I've already updated my firmware on the DLINK router at this point. Perhaps that solved this problem, please send a reply. Thank you

  I scan too quickly on the list of programs on the control panel. I was looking for 'readycomm' but in fact he is listed as Lenovo ReadyComm. I uninstall the program and with my old DLINK DI - 64 router 802 - 11g it connected right to the top. I think it's the best simple solution, otherwise venture in the replacement of the router or more complicated fix 'SNAFUS' dispersed in this forum.

  Our GURUS should make a sticky thread in the first page listing the patches.

  Thank you

• Y430: My laptop interrupts Internet on other machines when it connects

  I was wondering if anyone else has had problems with their Lenovo Y430 interrupt internet on other computers that are connected to the same network, when it connects? We have a Lynksis router connected to our Internet headquarters and for some reason whenever I have any initiate a connection (and it seems to happen more when I'm in the same room as the other computers/router), it will kill all connections continuous like instant messaging, videos, online games, etc.. Once I'm fully connected, it is very good and it doesn't bother anyone. This is starting to be a huge problem for us. If this is common, it is probably something to do with the ideapad, if it is not, it might have to do with the router. I need to know so I know who to turn to for a solution.

  have you tried to uninstall ReadyComm?

• IdeaPad Y530 wireless wifi is turned off then on battery

  I have a new Ideapad Y530 Intel 5100 wifi wireless network card. It works fine when I am connected to an electrical outlet, but when I am on battery it loses connection Wireless after about half an hour of use. When I check the network card, it shows that it is disabled. I'm trying to enable him, but she remains disabled, I can't operate unless I restart the computer. I've done so far that has not fixed it problem:

  1. I checked the power management settings in the device for the network card Manager and you have unchecked the box "allow the computer to turn off the device to save power".

  2. I already uninstalled Readycomm since I had problems with it before

  3. I also affect roaming aggressiveness 1.

  Can someone direct me on how to keep network to get wireless card disabled when I am on battery?

  In addition, once I lose the connection Wireless because the network card is disabled, Windows Vista network settings are really slow to come for me to check my network connection and settings, never had this problem with XP. System seems to hang for several minutes before I can get into the network and sharing Center.

  Thank you.

  I think I've figured this out. I disabled and then uninstalled the power management Lenovo that at first seem to solve the problem but didn't. I knew that it was something to do with power management, so I checked my settings and it was set to energy saving. When I changed to balanced remained turned on the wireless network adapter and I have not lost my network connection. I checked power options advanced for the adapter in symmetric mode and energy-saving wireless and found that Power Saver if it had set for the Maximum energy savings while only balanced if it had set for maximum Performance. The setting for maximum energy savings, it is this that kept disable the wireless card with after several minutes, I changed it to the following configuration, low energy and my without thread remains active and I don't lose my network connection. So for anyone else having problems with the loss of their wireless connection, try to check your power management settings.

• G560 wireless connects to other networks, but not my home network

  Hello

  Got the 560 yesterday and set up was smooth. First thing I did was try to connect to my home wireless network, but it wouldn't connect. I checked the network password several times but it doesn't connect at all.

  All my other devices at home can always connect to my network. And the 560 connects to the network of my neighbour without problem.

  So I think that this is not a problem with the radio doesn't work.

  Tried to restart the connectivity and the computer several times, but has not made a difference. Does not resemble ReadyComm is installed on my machine.

  Someone had this problem? Is there anything I can try?

  FYI my home router is Netgear and is set up with WPA - PSK.

  Thank you.

  Update:

  Discovered the Atheros drivers were from 2009. Looked around the internet and found a newer version (although not later).

  Updated the drivers manually and its working fine now.

  PS: The pilot of the lenovo Web site download section is horrible... awful.

• Lenovo g460 cannot connect to WPA-secured WiFi

  
  

  15 tank going.

  I use no ReadyComm software.

  Problem solved.

  I put the WPA2-PSK security on router, computer laptop sees network WPA2-AES and connected to suscesful.

  It's amazing, but works.

  I think that work of pilot WiFi broadcom evil.

• Limited access to internet - wifi

  Just unpacked my new T510 and discovered a nasty problem with Wi - Fi. I CAN connect to the unsecured router my neighbor - but not to my secure wifi.

  • I see my router, but logins refuses to connect - give me just a different "" error each time and a big red X where the green bars should be;
  • If I connect manually through windows, I can get a connection, but get 'limited connectivity' - that means no internet access.
  • I have not installed Readycomm.
  • My router is windows 7 compatible and I use the setting of personal security to WAP2
  • I rebooted several times.
  • I am ready to throw this computer out the window.

  Problem solved. I dropped the d-link router and bought a new Linksys router.

  Cost of a new router $65.

• G550 power management driver

  Hello

  Somewhere in my travels I have uninstalled the Lenovo power management driver, preferring to rely on the installation of clean energy from Win7. But now I think that I need this driver in order to activate Bluetooth. A research on the Lenovo site grew up anything for the G550.

  I have the original adapter broadcom 802.11 wireless, and I put his advanced properties, the bluetooth collaboration, to activate. But there is no Bluetooth item in Control Panel, and Fn + F5 does nothing. I downloaded and tried utility of Broadcom Bluetooth discovery, nothing helps. Lenovo ReadyComm said that no BT software is available.

  So maybe the key is to install the Lenovo power management driver. Anyone know where I can get it?

  Thank you

  p.

  Hi Paul,.

  Look for the Lenovo Energy Management:- http://consumersupport.lenovo.com/ot/en/driversdownloads/drivers_list.aspx?categoryid=600154

  I hope this helps.