ReadyShare on Windows 7

Similar Questions

• WNR2200 Netgear ReadyShare USB storage does not

  I have trouble getting the USB ReadyShare working on my router Netgear WNR2200 storage. If I reset the router to factory by using a paper clip and now the reset button in and then just connect a computer to Ethernet, 1 Port, it works fine and I can access by typing just "\\readyshare" in windows Explorer. Unfortunately I can not leave the router with its factory settings as it is not good for my network, I disable DHCP, because it's the 3rd router on my network. The router itself works great when I do that, all the computers connected to have a connection to the internet and can also connect to each other etc... purpose storage readyshare file sharing no longer works. It's just as if she is not there.

  While I was trying to experiment when he actually stopped working, so I reset the router to factory settings and started again. Connected to the computer first to 1 Port Ethernet and it worked fine as before. Went in the router settings and turned off DHCP and it has always worked well. It is only when I actually connect the router to other routers which ReadyShare USB storage stops working. When it is assigned an IP address from my main router which is the DHCP I guess? I don't know why that's upsetting it well? I checked on the same workgroup (a setting that I didn't notice initially) but also makes no difference.

  Does anyone have an idea what I am doing wrong? I guess it is just configured wrong and it's probably something really simple, but I can't see it. Any help would be much appreciated, thanks!

  Simon

  Change the LAN IP is affecting an IP address on the WNR2200 to be in the same range of main router.

  You will be able to change this in the LAN Setup.

  The steps would be:

  1. do you have a computer just be directly to the WNR2200 and nothing else.

  2. navigate to the router admin page.

  3. change the LAN IP to a unique IP address, such as 10.0.0.200 or one IP address that is not used in the network.

  4 disable DHCP.

  5. once the settings are saved, connect the main router to one of the WNR2200 LAN ports.

  From there, you should be able to access the USB key.

  Let me know what happens.

• Questions to access the router Netgear WNDR3400 of laptop Readyshare USB disk 64-bit Windows 7

  I have a laptop of 64-bit windows 7, which is connected to the router of netgear wndr3400.

  I have a USB key connected to wndr3400.

  This drive is supposed to be accessible through the path of the \\readyshare\USB_Storage, but I can not connect by typing the path and I'm not under network. I tried to wire the laptop to the router, but the path of the \\readyshare is still not accessible.

  There is no firewall on the laptop.

  I see other computers on a network in the same network the laptop.

  I also have a desktop that is connected (wired) to the router, and the Office can see the \\readyshare subnet. The office is equipped with Windows vista 32 bit.

  I would appreciate your help in how to solve this problem.

  Hello

  Try to redo all the sharing system around a working network configuration.

  --------------------------

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  ------------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account on the computers they are allowed to connect to everyone is an account, that means a group of all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• ReadyShare drive unusable in the DOS command prompt

  I have a Nighthawk C700 - AC 1900 WiFi cable router Modem where I configure drive ReadyShare USB access.

  When I type the UNC "\\READYSHARE\USB_Storage" and type the Admin password for write access - I "can" see the files/disc in Windows Explorer. I can map the UNC path as a player U:\ and I can see/access it very well in the GUI.

  However...

  Once I go to a CMD command prompt (even tried as admin) - I see 'no' this player U:\. Error message = "system cannot find the drive specified."

  ReadyShare drive is a USB 2.0 disk formatted in Win7 to NTFS 2 TB external.

  I'm on Windows 10 v1607.

  If I connect the USB directly to my computer - I can see/access this drive U:\ locally and use the CMD utilities against it very well (robobopy.exe).

  Anyone working on this issue and or knows how to get CMD to use/see the ReadyShare full-access/write?

  Thank you...

  Peter

  Update: it's working now. ?

  I've upgraded to the latest version of Windows (1607.14951.1000) 10.

  I also upgraded Netgear engineering to v2.4.32.

  I "can now use/see the drive Readyshare in a CMD Shell."

  I can run normal DOS commands on this very well mapped drive.

  I had to modify my script robocopy to remove the /COPYALL and /ZB settings as I guess that Linux/NAS does not support these settings, but I can now, with the click of a shortcut on the Desktop - Sync/restore my files the on the network to the NAS drive.

  I don't know if it's the change in Windows or in engineering who has been around.

  hope this helps others too.

• Cannot access router Readyshare

  This topic was preciously posted, but I have still not found no answer. Here's my situation:

  -Netgear model router with USB inserted Readyshare C3000.

  -Windows 7 access Readyshare desktop computer

  -10 Windows laptop already accessed Readyshare. All of a sudden, I get an access denied message saying:

  "Not accessible. You may be allowed to use this network resource. Contact the administrator... A specified logon session does not exist. It may already have ended."

  No error number is attached.

  None of the network settings on the computer have been modified.

  In the file on the PC of 10 window manager I see Readyshare. When I click on it to access the content, I get the above message. He doesn't want a password. It just display the message "access denied."

  As for Googleland, I google the subject and found many discussions, but nothing of this has solved my problem. Don't know where to go next. For now, if I want to transfer files between the two systems, I resort to the old-fashioned copy to and from a flash drive way.

• Flash ReadySHARE disappeared from network drives

  Before I could access flash drives connected to my WNDR4500 (v2) by clicking on 'Network' under 'Computer' on my Windows 7 desktop. Since yesterday, the flashdrives have disappeared in this place. I can access it by opening Netgear genius, clicking ReadySHARE and then clicking on the address of the router. Flash drives appear so and I can copy/write normally. It is a cumbersome procedure. That's happened? I made no changes to my system, other than Windows updates to routine.

  It turns out that the solution is really much simpler. Instead of addressing the situation through the computer or network, enter Netgear genius, simply click through the ReadySHARE choices and click on the address of the router. When the flash player appears, right-click on it and select "Map network drive." Select any available drive letter and the flash player becomes immediately available under computer.

• How to install readyshares in kodi?

  Hi, this is my configuration, r7500 with the usb storage device connected to it, on the same network I have an android runnning kodi decoder, I can't understand how to add this drive part ready to kodi, http connects but not opening inside kodi no files appear.

  on my pc, I know how to connect via \\readyshare, but how to access the \\readyshare kodi? is \\readyshare nfs, ftp, smb?

  It should go something like this:

  Videos > files > add videos > Browse > Windows (smb) network > workgroup > Readyshare > T Drive (in my case) > OK and then you can name the disc and put your info of scrapers. After that, you should be able to go back to files and see the drive Readyshare it. That's what I did anyway.

• Unable to connect Readyshare via netgear WNDR3700v2

  Original title: v Readyshare Win7 64bits

  I have a netgear WNDR3700v2 which I hooked a USB up to.  My Samsung TV and laptop XP see the end drive - laptop can read and write.  My problem is with my main computer that is running Windows 7 64 bit.  I can see the drive as a network media device and that you can look at these files, but I do not see the drive as a drive to add files/folders.  I can access via a web address, but the network address does not work.  Help me please.

  I had the same problem for weeks. I have the WNDR3700v2. This is my third Netgear router, so, naturally, I thought it was a problem with the router.

  After trying about all the solutions I could find online and face the team of 'support' of Netgear, I decided to uninstall and reinstall the driver for my card wireless on my laptop.

  I have an Intel Centrino Advanced N-6230 wireless card. He was a pilot with a date of October 2011 before uninstalling. I uninstalled the driver and let Windows 7 automatically install a driver when you restart. He installed a driver 21/06/2011.

  ReadyShare now appears in my network (workgroup name is the same on the router) and I can map the drive again once more.

  I hope this helps.

• How to activate ReadySHARE using NETGEAR WNDR3400v2

  Original title: readyshare problem

  I hava a netgear WNDR3400v2 I have not been able to activate the readyshare in my laptop. I tried in a few different ways it can't solve my problem can you please give me the solution

  Hello

  Thanks for posting the request in Microsoft Community Forums.

  What happens when you enable ReadySHARE? Do you get any error messages?

  Perform the steps mentioned below and then check if it solves the problem. You can also disable antivirus program.

  Step 1: Turn off the antivirus program

  Temporarily disable the antivirus program

  Caution:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Follow this PDF document on how to join the cloud ReadySHARE.

  http://www.NETGEAR.com/assets/landing/ReadyShare/ReadySHARE_Cloud_Flyer_12JULY2011.PDF

  a. click the Start button

  b. type \\readyshare.routerlogin.com , in the search box and press on enter.

  c. This should open a window with an inner folder similar to the USB storage device.

  I could not find WNDR3400v2 in the list of supported models ReadySHARE provided in this article. However, you can follow the procedure described here to see if that helps.

  http://www.NETGEAR.com/landing/en-us/ReadyShare.aspx

  If the problem persists, I recommend you contact the NETGEAR Support for more information.

  http://support.NETGEAR.com/for_home/default.aspx

  Hope this information helps. Response with status so that we can help you.

• About this Mac window

  A week ago I updated my Mac Mini end of 2014 to Sierra and, among other drawbacks, I found that the "to comments of this Mac window" doesn´t show when it is called. In addition, the button of the substitution of Apple ban on which they consider unreliable applications (i. e.  those not manufactured by Apple or not using the iTunes channel) is now gone and I won't unintentionally control I have in my computer. In this case, this means that I can't update latest version of Penny Fletcher of his useful Multimarkdown application.

  You can adjust your settings to allow internet content to other websites by clicking on System Preferences > Security & Privacy > General and down, adjust the setting "allow applications downloaded on:

  To call ' about this Mac' Panel, press the black Apple > about this Mac

• I resized the Partition Mac to make more space for BootCamp and now Windows will not boot

  On a collague MacBook Air running 10.11.4, we used disk utility to reduce the Mac Partition so that we could then use a Windows tool to extend the BootCamp partition. However, upon restart, we got a BACK screen with the error that Windows cannot start because it cannot find the boot device.

  Help, please?

  This is not a mechanism supported by Apple to change the size of the Windows partition. Apple supports the remove/reinstall only.

  We try to remedy. Please after the release of the following OSX Terminal commands.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  What is the model/year of the MBA? Please, do not post the serial number of your Mac. Orders 'sudo' will ask for your password.

• After recent, iPhone, 6, update, Windows, Explorer, does not work, see, iPhone

  I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone.   iTunes sees it yet, but windows Explorer does not work.  It seems that some setting has been broken through the update of ios.  A way to solve this problem?

  Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?

  TT2

• How to prevent the automatic launch at windows startup 10 itunes

  I have the latest version of Windows 10 and the latest version of iTunes on laptop Lenovo 2015 of 64-bit model.

  How can I prevent iTunes from launching at startup of the system?

  Try this...

  1. Right click on the taskbar.
  2. Select the Task Manager.
  3. Click the Startup tab.
  4. Click the iTunesHelper app.
  5. Click the button disable.
  6. Close the Task Manager.

• Bootcamp Windows - partition cannot be mounted

  Hey all,.

  I've been using Windows on my iMac (late 2012, Yosemite 10.10.5) without problem but today after I started MacOS Yosemite (to control simple file), cannot start again to return to Windows. Had no problem Bootcamp before... have not used to any advantage either 3rd disk utility. The only thing I have recently increased the Windows size 200 GB partition by decreasing the MacOS partition through disk utility (a month ago, no problem since then until today)

  1. Windows has disappeared from the startup disk

  

  2. disk utility shows disk0s4 gray and cannot be mounted. In addition, the correct partition size was 700 but here its listed as 500 GB GB (which was the old size before you increase it)

  

  3 when I try to restart with pressed ALT, Windows, but cannot restart, with a black screen showing "a disk error occurred.

  

  I'm not very familiar with techniques more. Only, I tried to install "Find" but cannot achieve anything with it.

  I tried your advice above and seems THAT NTFS is there...

  

  one last thing... when I try to check disk0s4, said "it should be repaired. When I hit repair; It says this:

  

  Need my Windows as soon as POSSIBLE, what more should I do?

  I don't have not upgraded to Sierra again. That I should? Or it will be even worse?

  I have tons of files on Windows that I need and unfortunately not supported for a while anywhere (sorry about that now).

  Help, please...

  stuff more to indicate...

  

  and I know if it's significant but cmd + s & ' fsck - fy "has not done anything other than check the Mac partition.

• 8gig of ram will be enough to use windows?

  I'm about to buy a macbook pro. This is the model of 512 gigabytes, 3.1 GHz, 8 GB ram. I want to only install windows to play spintires and that would be it. If I install windows and steam then spin tires it will the macbook running slower?

  rotating the tires to the requirements

  CPU:	2.5 GHz Dual Core

  RAM:

  4 GB

  If you install Windows using Boot Camp Windows wizard will use all your computer RAM, 8 GB, when you start in Windows. It's more than enough RAM for Windows and a spin the requirements that you have posted.

  If you boot into OS x, OSX will use all 8 GB of RAM.