RealTech audio

Similar Questions

• HDMI audio problem

  RealTech HD audio drivers? Just installed cards GeForce GTS250 Zalman edition on nForce 780i SLI Mobo, integrated realtech audio output HD, win XP pro x 64 O.S. is there a way to xmit audio and vidio out on GTS 250 HDMI? Disc that came with not much of help vidio card, refer to the internet for the latest drivers @ xfxforce.com. I didn't know what I was lookin it. Too much to QVC! Basket basket, Com Man tools!

  Most of the (chip based on nVidia) Geforce video cards require that the 'Digital' audio 'motherboard' port be connected with 'internal' audio HDMI cable 'out' pins on the video card.

  It is worth noting that the HDMI audio may be limited to audio 2.1.

• vistaSp2 with Realtech - sound problems

  vistaSp2 with Realtech audio driver. His burst & speed/pitch variatons Wintv (recorded or live content) and audio files through MediaPlayer. All updates implemented to the extent where knowledge. I'm not a mechanic Windows if I do what I can when I have to.

  Closed.

  Some changes to settings greater repeat driver uninstalls / sys restarts up OK.

  See http://answers.microsoft.com/en-us/windows/forum/windows_vista-sound/vista-sound-output-popscrackleshesitates/4cb0b3af-3784-4865-b405-6fd91dc29a13 - pure gold.

• Addition of Logitec X 540 for Acer Z3731 speaker system?

  Recently, I moved my all-in-one to a better location of the room and exchanged external speakers previously installed on an old desktop Acer running Vista.  In the process, I lost control of his driver and were unable to reinsall and reconfigure correctly.  The problem seems to be the characteristics of the internal speaker system and the driver stack which detects "characteristics.  I can't get the hardware to install and control the speakers sound Logitec 5.1 surround plugged into the rear panel as a system of "surround sound."  I can't keep the pilots to recognize initially built in audio which is only capable of stereo output high definition.  As a result, the external speakers that provide side Centre and wofer via a supplied matrix decoder control unit end stereo playback.  They worked fine with my old AcrePower-FH desktop running Vista.

  Any suggestions on how to proceed under Windows 7 (64 bit)?

  I ended up buying a subscription program manager drivers that provides recommendations for driver updates and uses heuristics to adopt its recommendations.  Do not trust it to Acer Aspire Z3731.  He recommended an incorrect driver for video on my computer.  It isn't that I had installed and started having major problems with MSIE 10 on the homepage of Comcast that I returned and found the driver for the Intel video chipset that is actually installed.  When I updated to this driver the next Microsoft Update I ran came with an optional update for Win64 with finally corrected graphic problems, but...

  It doesn't seem to be a way to get Windows 64 to install and display two other speakers or automatically override the defaults that the RealTech Acer driver is recommended for my box seems to be 'frozen' in.  The appearance of the user interface on the Realtech Audio Manager software installed, it is supposed to be able to detect the existence of more than one pair of speakers and adjust the injector appropriate as a default value.  Unfortunately, when I plug the X 540 he does not spend them and instead to show three son plugged into the rear panel, it shows four. I think that the fourth wire represents the internal speaker attached to the bus, which is a virtual place inside the computer.  What I have to open the case and disconnect the front speaker bar for this problem?  If if it sucks since Acer had rejected me requests to provide a case diagram or disassembly of instructions that would help me make sure that I'm not going to break anything trying to open the case.

  Someone answer please?  Apparently Acer Genius never faced this problem when they set up the software.  The package provided with this computer has now received 228 updates from Microsoft since I turned it on.  The 64-bit Microsoft Internet Explorer 9 instance that comes with it was so buggy that I ended up using Firefox to register with Microsoft so I can get automatic updates!  I'm really a fan of Acer, I own three of their computers, but this problem seems to be specific Acer.  I had the 540's X on an old Vista based desktop Acerpower FH and the driver bundled with it recognized them very well, but there was no internal speaker system.

  Finally! a partial solution to my symptoms... With the X of Logitec 540's hip, 'Matrix' button put out SERVICE and its 7.1 surround selected, I was able to get both the two "outside" speakers to operate under the name "back" involved so that the two exploited inside speakers as left and right and Center and the woofer to play simultaneously.  I had to have the driver set as "disabled" when I plugged the three sons of the 540 X and use the wizard to "solve the problems of sound" to get recognized records.  A good part of my funbling came about from can't understand what 'Matrix' on the X 540 controls mean.  It is intended to sound source that is only made in stereo, for example an MP3 player created by scanning of a stereo recording of the 1960s.  In my tests, I've often had this option and he effectively lost all but the left and right speakers in the X 540 system.

  I'm still not able to easily switch my Windows 7 X 64 system to use the system of external speakers with the sound bar and back via the software.  I think that this feature is / should be available for all-in-one devices.  No explanation?

• Headset does not appear under playback devices

  Hello

  I am facing this weird problem in my speakers.
  When I insert the headphone in my laptop, his headphones and speakers come out. And the noise coming from the speakers in not the same sound that comes true, it's deformed configuration.
  I solve this I tried to check the parameter in reading and shocking devices, I would not find option helmet here. Then I went ahead and install the latest Realtech Audio drivers. Then also was shown no option for headphones.
  Help, please.

  Hello

  You can check if the headphones are activated as a playback device. To do this, see the following steps:

  (a) the Pearl-click Start and type Sound in the start search box.

  (b) in the Start Menu Options, select change adapter settings .

  (c) then, on the Read tab, right-click and select Show hidden devices and Show disconnected devices if they are available.

  (d) select headphones and select

  You can also view the following link for more information about advice for solving common audio problems:

  Solutions to solve common audio problems

  I also suggest you to follow the link and check.

  Sound cards: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sound-cards-frequently-asked-questions

• I have a Logitech USB 350 and Windows 7 headphones not not even seen in any USB port

  Recently, I built my new system and installed Windows 7 Home Premium 64-bit.  I was using my Logitech USB Headset on my previous bench which was under Vista without any problems.

  After all the installations and updates, it was time to see what games and Movies looked and sounded like.  I plugged my faithful helmet in a USB slot... and nothing happened.  And I hear nothing.  My system is not same recgonize that nothing is plugged into the USB port.  I tried other 8 available USB slots and got the same results - absolutely nothing.  And Yes, all the slots work. Connect any other device (external hard drive, Memory stick, etc.) each any every site works very well.

  Plug the headphones on another computer running XP. It is recognized and works perfectly.

  Back to my new PC, open the control panel with the connected headset and go to the appropriate screen - I see my speakers and Realtech Audio, but no helmet, no unidentified device, nothing.

  The compatibility section of this web site confirms that this helmet is AOK with Wndows 7.

  So, anyone have any ideas?  Any help is greatly appreciated.

  I'm having the same problem. Never understand you a solution?

• I uninstalled mistakenly pilot Realtech hd audio. How can I get it back?

  I uninstalled mistakenly pilot Realtech hd audio.  How can I get it back?

  http://www.Realtek.com.tw/downloads

• No sound in the pc. (realtech HD audio, this device cannot start code 10) audio driver package-kb835221.

  in Add / Remove Programs, I got 2 programs of driver high definition audio I removed one and still does not

  Delete the other, a re-boot and re-install.

  See you soon,.

  Jerry

• Flex 14 issue of Audio in Jack / headphones

  Hey, I have a flex 14 ideaPad and until recently all worked without problem audio-wise (when headphones have been and is not plugged in), except for randomly a couple of days, when I plugged the headphones in the plug and no sound came through the headphones or the speakers, although the headphones were detected by the laptop. When I unplugged the sounds would come again through the speakers.

  I tried again with a different set of headphones, but the problem came back that lead me to believe that the problem is with the laptop, after searching solutions online, I decided to remove it and then reinstall the Player audio (Realtech HD Audio Manager). This fixed the problem for a few days, but now the same problem is back. I'm confused as to whether this is a hardware/software problem based as when I reinstalled the driver he solves the problem, so he could not really related material being.

  If anyone knows what is the problem? Should I just continue to remove and reinstall the driver? Once again the helmet are detected by the laptop, they do not appear as their own reading device (is it always the case?)

  Thanks, Tiernan

  The configuration of Realtek on the Flex has Windows only show a single, common system for all the audio outputs.

  Here is the latest driver from Realtek. If the problem persists after, I would recommend a warranty call.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownT...

• Audio Acer 5520g does not work after the new service pack

  I installed XP and is up-to-date. However, when a new service pack arrives, it destroyed the Realtech driver that I downloaded from the Acer support site.

  One way to recover is to do a scan complete antivirus C drive.

  Second method is to remove the speakers from the Device Manager, install the Realtech driver after the service pack update.

  The question I have now is that the latest SP crushed the audio driver again.

  Restore restore previous point never works on this or any other question, I've had with windows no matter what...

  All previous options have failed now.

  Any help appricated.

  Download the "RealTek" directly from RealTek driver. ;-)

• Didn't hear from Microsoft LifeChat lx3000 headset and cannot record audio as well

  Original title: Microsoft lifechat lx3000

  I'm using windows 7 ultimate 64-bit. Gigaybyte ep43t-usb3 motherboard with Realtek hd audio manager on it >. >

  Basiclly my problem is as follows. With this realtech thing, I can't get sound out of my speakers, or my logitech headset. I can't have a microphone to work with it nor with the helmet, or just one. With the lx3000 I install the cd (also tried the drivers on the MS site) plug the headphones in and nothing. I have no sound in headphones, audio recorder says that no microphone is there. The drivers are properly installed.

  It is a very annoying problem that im finding hard to fix, google searches do not come upwards with people having the same problem as me. I had a friend use remote desktop to try to help as hes not bad with computers. We have installed, uninstalled drivers, used previous drivers, disabled the onboard sound, everything and nothing. Still no sound usb headphones, still no micro.

  I know theres nothing wrong with headphones because I tried the lx3000 on my old xp machine, works very well, and even with the logitech, even if I only got to test the microphone that I can already get this headphone sound. Me missing something, is there a service audio usb secret to >. >

  I used the troubleshooter, but which does nothing. In the clicking noise right, playback devices, I can't do anything by default, this thing realtech takes control of what he wants, the changes I make in the properties of something are cancelled at the moment I click on apply and ok. If I have the headphones plugged in usb, tab check GELERA, disconnected from its fine.

  Any help to fix this frustrating extremley would be appreciated.

  Hi veexy,

  I suggest you to visit the links below that would solve your problem.

  Step 1: Activate the sounds in the LifeChat headset

  http://support.Microsoft.com/kb/935749

  Step 2: Activate the sound recording for headset LifeChat

  http://support.Microsoft.com/kb/935748

  Hope this information is helpful and let me know if you need additional assistance.

  Karena R - Microsoft Support

  --------------------------------------------------------------------------------------------------------------------

  Visit ourMicrosoft answers feedback Forum and let us know what you think

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Audio / Microphone on Laptop Inspiron 15 computer laptop does not not after upgrade to Windows 10

  I have an Inspiron 15 bought mid 2013 with Windows 8 and little used. I just upgraded to Windows 10 and the upgrade was quick and easy.

  Since the update the microphone at full volume can barely be heard (my contacts on Skype hear me at all).

  I tried to install the latest driver of Realtech and also for this device, the Microsoft driver, but makes no difference; I'll be back now the driver original waiting to get some tips.

  It seems that it is a common problem with Windows 10 because there are many similar problems, broadcast on the Microsoft support forums.

  Someone at - it a solution please?   Waiting ;-)

  Graham

  You are not alone because apparently many of us have this problem. Short term solution is to change the driver from Realtek to the generic Microsoft HD Audio Device in Device Manager. The long-term solution will take Dell Realtek + Microsoft to acknowledge the problem and fix the drivers.

• Cannot change the default audio playback device

  Hello

  I tried to get a sound via HDMI, but after hours of trying, each solution is to change the audio playback device by default (in the volume mixer). My PC allow me to do so! It just won't change current default device (digital output Realtech). Can anyone help? It's driving me crazy.

  PC is HP Pavilion Slimline model s5395a. Using Windows 7.

  Thank you, Bill.

  > I don't know much about computers
  Then, it is the question, if you want to change things in the bios.
  You can make changes so that the pc will not start, so be careful. If you don't change anything else, save.

  It is described here:
  http://support.HP.com/us-en/document/c01884922

  You can try some of the other steps first, access to the bios is described before step 10.
  You can 'onboard audio' the value 'Auto', or just turn it off.

  HTH
  C.

• DD Realtek audio Manager works not

  Hi, I can't open Manager audio DD realtek on my laptop (Windows 8 - pre-installed). Sound works, I can play and record sounds, but I cannot open the interface for audio Manager which means I have limited functionality. I contacted the manufacturer of the laptop and downloaded and reinstalled the drivers without result. I can find the audio Manger in the program folder exe files, but nothing happens when I double click on it. There are no realtech of icon in the system tray. any help would be appreciated.

  What brand of laptop computer? The reason why I ask this question is because of some manufacturers install their own version of the drivers that are pretty, much outdated and is not compatible with the realtek ones. what you need to do, it is first of all uninstall the Realtek drivers.

  Do not the manufacturer of the laptop computer for drivers.

  Directly download the latest version of Realtek. ---

  • Save the driver installation audio file to a location such as your desktop. Double-click the file to install on your desktop to install the audio driver on your system.

  • Make sure the Realtek HD icon is in the Windows task bar or in the control panel.

  If you have the Zip file with the audio codecs and Exe inside can not extract you it in a folder and run it directly from there?

  Papa razi

• Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

  After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

  I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

  But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

  Thanks in advance

  Hello StasV,

  Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

  Audio routing call - the iPhone user Guide
  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon!