rear connections on h8-1350ea

Similar Questions

• Rear connections of HPE H8 - 1360T

  What connections (USB, video, Audio, LAN etc.), are available on the back of a Pavilion HPE H8 - 1360T?

  

  1 S/PDIF
  2 USB 2.0: 4

  3 - LAN (ethernet)

  4 USB 3.0: 2

  5 - 1 DVI - i and DVI - d: 1

  6. audio: Central/subwoofer

  7. audio: Line-in

  8. audio: rear speaker output

  9. audio: output

  10. audio: side speaker output

  11. audio: Microphone

  In addition, regardless of other connections are added as a result of the ordered options.

• Wireless connection lost after only five minutes

  Hello

  New on site, but you have a very annoying problem, here go us
  I just got a 2nd hand laptop Toshiba Satellite S1800-402 and has decided to add this to my setup wireless at home (big mistake), anyway I have a router wireless 802. 11 b of mentor and my main pc connected to the router and another pc which has a mentor 802 wireless pci card. 11B. Pcmcia card from the laptop is a mentor 802.11 g card is compatiable back, so I was told by bloke in-store pc.

  Just the problem I have is the pc successfully connect to internet the laptop will be fine OK, but 99% of the time I would say 5 minutes max before losing the connection and only way to get the rear connection is either reboot the laptop, or remove the pcmcia card and hope that it detects the wireless again. the wireless network is not secure on it and checked on the router page and there is no filtering or configure... I have Digital wireless home phones that I unplugged and get always the same problem.

  Would be - what this model has received a wireless card already and there is a conflict.

  It becomes a default really annoying that I head in fact.

  Any help would be greatly appreciated no matter what other requried info I will try to help

  Thanks in advance.

  Post edited by: sidog70

  Hello

  As much as I know this model doesn't have a WiFi card and this kind of conflict is not possible. In my opinion connection breaks are caused by software settings or false. If you make a permanent download happens the same thing?

  Try to check the power consumption of your network card WIRELESS and also Idle timeout option in the router.

• Having trouble with my internet connection through wifi. N600 router is what I think.

  I had some problems with my internet connection recently via my wireless router. I get the little triangle yellow and with the connection at different times and I can't call my local internet provider because it still works when they are open, and then it closes when they are closed. I recently bought a Google Chromecast and some think it might interfere with the connection, but I don't see how. When I reset the modem router and cable by unplugging and plug their return they sometimes get the rear connection but it's annoying not knowing when it will go off again, then come back. A few months before the connection out sometimes but not several times a day. If you need additional information such as the type IP DNS stuff I can get it. Also recently I have updated the firmware of the Netgear if that makes a difference. Thank you!

  Thanks to all who responded. I talked to my ISP and discovered that the modem was abandon the connection because he was old and he sold me a new and things work fine now. Thanks again!

• Updates, caused the loss of internet connection

  For the second time this year, after a Microsoft Update on my netbook Windows XP Home, I lost my internet connection. Two courses (June) updates involved are KB2518864 and KB2478658. I tried to restart the computer once or twice, and I still didn't have a connection. I did a system restore, and the internet connection is back. No idea what's going on? (Yes, I know, Robear, that it is wrong to use the system restore, but it seems to do the job.)

  I have tried to have reported the problem to Microsoft but had someone who did not speak English very well and was indifferent to the problem. When I said that the restoration of the system got the rear connection, he said, "so what do you get? He added: "We recommend you to install all the updates." I said it wouldn't do me any good to have the updates, if I could not then use the computer. He said that he would report the problem - but he was not asking for any personal information, and I don't have a file number.

  Another question: I installed all the high priority Patch Tuesday updates June, Thursday, June 16 - and told me that everything downloaded and installed OK. I have been informed (by the yellow shield) on the two new updates on Saturday, June 18. No idea why these two pointed to the end?

  Finally, I need these two updates (they are for the .NET Framework) if I'm not a programmer?

  Thank you!

  JO-Anne

  JO-Anne

  KB2518864 has a few known issues
  http://support.Microsoft.com/kb/2518864

  KB2518864 has a few known issues
  http://support.Microsoft.com/kb/2478658

  If you do not you leave your system vulnerable. If you lose your internet connection, you can remove if Add / Remove programs in Control Panel.

  Hide and not install it leave you vulnerable. I would try one at a time. If you lose your internet connection remove the cause of the problem. It is always useful to restrict the domain where the problem lies. Get even one reduced the vulnerability of your system.

  You brought up an incident report. You will have more information we hope to get the update problem problem solved...

  I would not bother to Robear. His behavior is sometimes irrational.

• Windows keeps connect me with a temporary account

  I use windows vista and everytime I log in, I try to connect with my account that it connects me with a temporary. I tried a disconnection and rear connection, but the same thing happens. What should I do to stop this!

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  These problems and similar bugs can help:

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  A temporary profile is loaded after you connect to a Windows Vista-based system
  http://support.Microsoft.com/kb/947242

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  -----------------------------------------------

  Try these to erase corruption in the case where it plays a role.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Other methods:

  Use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK then go back
  and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the same for others
  accounts that may be difficult. If necessary you can also reset your password in the accounts.
  Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Connecting a laptop to a WRT160N Linux

  Finally got round to install a WRT160N over the weekend.

  I got to the top and running with a variety of hardware (wired and wireless), but I can't get my son portable Linux to connect.

  Is there a problem with Linux connectivity to WRT160N (V1) routers?  Are there drivers anywhere?

  The Linux version in question is the latest version of Fedora 10. (Sorry I'm not Linux guru, my son is)

  The same laptop connect when it is initialized with Windows.  I have other material connected with success - a Sony's WiFi multimedia receiver and a Wii, as well as a laptop under Vista.  I can't get the laptop Linux to connect.

  I tried setting the rear connection of type N mixed b/g.  No improvement.

  Is this a problem of driver or setting?

  This error message you get when you try to connect to your network when it is initialized with Linux... If you have the connection when it is initialized with Windows is not a router issue...

• Not allow error when the URL that works in IE is entered in Firefox 17.0.9

  I copied a URL of IE that opens well and stuck to Firefox 17.0.9 and press ENTER.
  All I get is error "unauthorized".

  You can close it. Problem disappeared after erasing cookies, restart my PC and the rear connection to launch any application in Firefox. Didn't need to upgrade to the latest version of Firefox yet, since most of our applications are supported until version 17 or maybe 18 at the latest.

• How to fix a corrupt installation?

  When I upgraded Firefox 21 to 23 and launched firefox, froze the process of 'the addon compatibility check' and I had to kill him. At the launch of firefox, it is obvious he is severely damaged.

  • • Clicking on just about anything in the menu it will cause to hang.* *.

  I can't even reset firefox.

  I thought it was due to my profile. I deleted the directory from... Local\Mozilla\Firefox and saved, but every time I start firefox, my old profile folder respawns somehow. I even tried disconnecting, by logging in as another user, delete the profile and the rear connection.

  I also tried to reinstall firefox, but still, it crashes when I click on anything whatsoever. I fear that my corrupted profile has been synchronized and I can't get rid of him.

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• Bought the option does not

  I'm trying to re - download music that I lost when my hard drive fried and the option to purchase under my account name is missing.  I tried a disconnection and rear connection and it is not yet here.  What should I do?

  

  I had the same problem, if it shows it depends (I have no idea why) on what options you have selected in iTunes: iTunes 12.3.3

  You should always be able to re-download your past purchases via the purchase link under quick links on the right side of the home page of the iTunes music store

• PX1223E - 32 1 external hard drive does not

  I the hard drive 320 GB above and until yesterday it worked fine.
  Now the drive is not listed in 'My Computer' and when I check the list of devices it is show as a mistake.

  I tried the uninstall of Windows then the rear connection I get a message saying that there is an error with the devicve and the device may not work properly.

  Any ideas?

  Hello

  have you installed any software or you install/uninstall anything? Try your drive on another PC and check if the problem persists.

  If so, I suggest you to contact your local partner and ask them for the proceedment of your data backup and then trade your car.

  Welcome them

• Toshiba TV/DVD combo 32SLV411U - listening to the wireless headset?

  I hope I am posting this in the right place. I couldn't find a specific board just for TVs?

  I recently bought a Toshiba TV/DVD combo 32SLV411U. I really like but have a problem.
  The best way to go about that I guess is to tell you what I hope to be able to do.

  I will say first of all, I called Toshiba tech support and they said it couldn't be done and advised that I buy a sound bar.
  I'm not 100% convinced they have well understood or that a sound bar would solve the problem.

  The tv model I does not appear to have a separate headphone jack. I was obviously the rear connections for rca type cables.

  While watching a DVD (not connected decoder, in DVD mode) I want to be able to have the silent TV.
  I live in an apartment complex and do not want to disturb the neighbors. I want the audio from the forthcoming DVD the only wireless headset. This does not work when the TV is connected to cable as the sound comes through the cable box.

  It seems to me that I should just be able to fix the audio cable rca to the back of the TV and listen as I've described above. But I can't make it work any configuration, I tried. I don't know if I just need to configure things differently or what. When I go to the menu and look at the options, it doesn't give me a lot of choices in this area, unless I'm looking in the wrong place.

  Is this possible without buy me something more? If so, how we configure it to do it properly when you watch a DVD?

  If I do not need to buy anything, how a Soundbar works and it would solve the problem?
  Or should I look for a standalone DVD player with audio connections on the back (a little beats the purpose of)
  have a TV/DVD combo, but could be a less expensive option.

  I guess I should have taken a second look at the features before you buy the combo TV. I just assumed that, with the connections audio to the rear, it would work. I had no problem with the previous TV/DVD combo I've owned, but it doesn't have a headphone port. In the meantime, I watch DVDs on my PC.

  Any information or advice is really appreciated. Thanks in advance.

  > I hope I am posting this in the right place. I couldn't find a specific board just for TVs?
  You can't find a good advice, because it is a user to user Toshiba forum computer systems.

  But maybe I can help you:
  > Watching a DVD (not connected decoder, in DVD mode) I want to be able to have the silent TV.

  I live in an apartment complex and do not want to disturb the neighbors. I want the audio from the forthcoming DVD the only wireless headset. This does not work when the TV is connected to cable as the sound comes through the cable box.

  In my case, I connected my stereo directly on the DVD player using RCA (red/white cinch) cables.
  In addition, the DVD player is connected to the TV via HDMI.

  I can turn off the sound on the TV and can listen to the sound from the stereo speakers.
  If you want to use headphones, then connect it to the stereo and it should help you :)

• Problems with Time Capsule

  I have problems with our time Capsule. My husband and I have Macbook Pro (from 2012). We use a Time Capsule as our backup disk but not our wireless router (we use the router provided by our internet service provider). We have configured like this for over a year and it is usually worked fine. In the last month, we had problems with backups does not happen. Currently, computer of my husband has saved in about 2 weeks, and mine has not backed up in 2 days.

  It seems that our computers lose their link with time capsule. If I go to the finder, the shared drive appears under "shared", but if I click on it to connect I get a message that says "connection failed." Airport utility shows the time Capsule but has a yellow triangle next to it that says "device not found."

  If I unplug the Time Capsule and plug it in again, it reconnects. I did this earlier this evening and was able to access the shared drive and make a return to the top. But a few hours later, this subject has disappeared again. I tried to do this same thing - unplug, get the rear connection, only to lose it again a little later. Any thoughts on what could be the problem? The Capsule was bought the same time than computers.

  I guess what surprises me is that you had no problems up to this point.

  Your computer must connect directly to the Treasury Board. Ethernet or wireless... It will break things especially in the BONES later if you do not.

  Do you have recently move you to el capo... ?? That could have triggered the problem.

  I lost the link but in apple of one document stated finally that you connect directly the computer now... because of the bad DNS in the operating system.

  If I unplug the Time Capsule and plug it in again, it reconnects. I did this earlier this evening and was able to access the shared drive and make a return to the top.

  That's why you get this nonsense. He is able to find the backup if DNS is renewed due to reset... After a few hours it is lost again.

  What operating system do you use?

  My recommendation is to put on wireless and a link to the direct of TC...

  A TC Gen4 purchased in 2012 is now at least 3 years and let me tell also your reliable stage... you are now at the stage of growing decrepitude of old people. It might work correctly for a year or two... It can suddenly die tomorrow... but more likely will fade into the sunset.

• In the reminders calendar sharing

  All of a sudden (without modification of all parameters), one of my shared calendars iCloud appeared as a list of shared iCloud reminder in reminders on my iPhone application.  He appears with the same title and shared the participants as the shared calendar.  It does not appear in the application on my Mac reminders or recalls on my iPad, and the original shared calendar continues to appear normally in the calendars on other devices (Mac, iPhone, iPad).

  Someone has an idea what is happening?  I tried a hard reset of the iPhone.

  A couple of things to try, if you have not already.

  -Have you tried to log in to your account on all devices iCloud, wait a bit, then rear connection?

  -Have you tried toggling reminders and schedules extinguished/turned on under settings iCloud on devices?

• LaserJet Pro M127fn MFP: Stuck "print fax page 1.

  I had to receive two pages of fax. After that the first page has come through it is stuck "print fax page 1. The second page is never good. I can't print anything. I already disconnected my printer and plugged in. When the rear connection, it uses the same throughout first fax page and gets stuck again. Happen from nowhere at least once a week for the past few weeks.

  Hi @cvsc ,

  I see that you are having problems with the printer stuck in an "Print fax page 1" error message when you restart the printer, it keeps printing the same fax. I would really like to be able to help solve this problem.

  I would like to do a hard reset to see if that will solve the problem. It's probably a little different then what you have already tried.

  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  I would say for updating the firmware of the printer. Here is the link just choose your operating system and select the firmware download. HP LaserJet Pro MFP M127/M128 series Firmware update.

  If you're still having problems, try to reset the printer. I'll send you another step to try in a private message to try.
  In the forum next to your handle name simply click on the envelope to see.

  If you need help, let me know.

  Good day!
  Thank you.