reboot and crash of mse 8050

Hello

8050 supervisor blade reboots constantly after a mistake (of paper):

trap: pid 60.6 (mcu): the user read trap DSI @ 0 0x182f644 (DSISR 0x40000000, err = 14)
dll_stat_reg = 92f000c1
GURU MEDITATION: PID 60 LWP 6 SP ffffe7a0 TID ffe00000
PC = 0182f644 LR = 01904684 CR = x 24000044 = 00000000 CTR = 41dafe7c
[00] r = r 0187b 974 [01] = r ffffe7a0 [02] = 00000000 [03] r = 00000000
[04] r = r ffffe7d0 [05] = 00000041 r [06] = 00000000 r [07] = 00000000
r [08] = 01904684 [09] r = r 41dc2634 [10] = 00000000 [11] r = ffffe550
[12] r = 00000000 [13] r = 00000000 [14] r = 00000000 [15] r = 00000000
[16] r = 00000000 [17] r = 00000000 [18] r = 00000000 [19] r = 00000000
[20] r = 00000000 [21] r = 00000000 [22] r = 00000000 [23] r = 00000000
[24] r = r 41c9f000 [25] = ffffe950 [26] r = r [27] ffffe7d0 = 59a6a5f8
r [28] = r [29] ffffe7d0 = 00000000 r [30] = 00000000 [31] r = 00000000
STACK DUMP:
Error reading 00001000 bytes of memory to the process at ffffe7a0
[2] segfault. / mcu
EXIT 139
Feb 18 11:16:21 reboot: rebooted by root
synchronization of disks... done

reset

I would be grateful for any suggestions

I suggest strongly get you a support agreement for the MSE 8000 and contact TAC, as there is little or no documentation of the MSE 8050 supervisor blade that can help.

Tags: Cisco Support

Similar Questions

  • Random reboots and crashes with WUDFRd failed to load of the device

    I get random reboots and falls down and receive check the event viewer I see this -.

    event 219, kernel-PnP

    The driver failed to load unit WpdBusEnumRoot\UMB\2 \Driver\WUDFRd & 37c186b & 0 & STORAGE #VOLUME # _____? _USBSTOR #DISK & VEN_USB2. 0 & PROD_CARDREADER_CF & REV_0100 #606569746801 & 0 #.

    well if anyone knows what it is?

    Your problem is unlikely to be associated with the event ID: 219, which warns a driver did not load. In fact the driver load a few moments later and the portable device then works.

    Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

    Please download and share with everyone copies of your System log and journal of the Application (two files) of your event to your OneDrive Viewer and post a link here.

    To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

    For assistance OneDrive see paragraph 9.3:
    http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

    General remarks on event viewer
    http://www.gerryscomputertips.co.UK/syserrors5.htm

  • Alienware 14 - PC reboot and crash when I try to install the graphics driver intel

    Hi, I reinstalled my os using the windows 8 CD dell and when I try to install intel hd graphics driver, reboot the pc and windows then crush. Also, I can't install driver nVidia graphics because I first have to install intel one.

    Hello purple397,

    Thanks for your advice and solve problems by opening the laptop again and clean the dust (not much) and disconnect the battery CMOS.

    Now I can use my phone normally, except that some programs (especially games) crash and exit automatically.

    Alienware is good when you play the game but life is low especially graphics cards. I will never buy dell again. Also disappointed the customer support. I have contacted more than 5 times in my life and each time disappointed. So sad. :(

    I hope that my experience and full help others.

  • After downloading the update for Yosemite 10.10.5, I got an annoying popup with a beep sound blaring that says that Safari crashed. I've forced to leave Safari, rebooted and popup returned once more. Restarted again and popup went. What was it?

    After downloading the update for Yosemite 10.10.5, I got an annoying popup with a beep sound blaring that says that Safari crashed. I've forced to leave Safari, rebooted and popup returned once more. Restarted again and popup went. What was it?

    Open Safari while holding the SHIFT key

    Try to reset the settings of Safari:

    1. open Safari

    2. click on the Safari menu at the top (to the right of the Apple logo)

    3. Select the Preferences/Privacy tab

    4. click on remove all data from the Web site

    5. close Safari.

    Remove cache Safari files:

    1. click on finder

    2. look for the menu GO to top

    3. click on GO and hold down the option key. This will show a user library folder.

    4. click library and find the Caches folder

    5. in the folder caches com.apple.Safari Ouvrezledossier

    6. move the Cache.db file Trash.

    This should solve the problem. If it does not help, try to disable the Safari extensions

    1. open Safari

    2. click on the Safari menu at the top (to the right of the Apple logo)

    3. Select Preferences

    4. find the Extensions tab

    5 disable all extensions of

    6. relaunch Safari

  • my Skype crashes whenever I click on one - I rebooted and also uninstalled and reinstalled several times

    my Skype crashes whenever I click on one - I rebooted and also uninstalled and reinstalled several times

    Hello

    -What version of Skype is installed on your computer?
    -What operating system is installed on your computer?
    -Did you change your computer, after which the question began?

    I recommend you only to contact Skype for support.
    https://support.Skype.com/en-us/

  • PC freeze/crash followed a "Reboot and select proper boot device."

    We have 11 PC running on a local area network, all currently running Windows 7 Professional. The following happened in recent weeks, on 4 of our PC 11:

    PC freezes completely, however, the mouse cursor will always pass normally, clicking on anything don't generate a result, or will be by pressing CTRL + ALT + DELETE. My first step in the fight against that had to leave the PC alone for 5-10 minutes to see if the problem resolved itself. After about 5 minutes, the PC will be closed on its own and try to reset, prompting the message:

    "Reboot and select good boot device or Insert Boot Media in selected boot device and press a key.

    When you press a key, the message again and again. The only solution I've found that this was a closed hard, leaving it for a minute and restarting, how everything seems fine.

    I'm suspicious that this may happen again, or on the PC so far unaffected, if someone could advise on what could be the cause, or how to stop from happening, I would be grateful.

    How old are the hard drives on those computers?  Is it possible that they have lack of hard drives?

    Download and run the software tester of the drive by the hard drive manufacturer to test the equipment.  Tell us the model numbers (Device Manager), readers and we'll give you links to get the correct software.

  • Satellite C50-B-13N - error "Reboot and select good boot device."

    Hi all

    My laptop recently bought C50-B-13N moving 39 updates yesterday, when it crashed.

    Get back with me stuck in a loop continuous. After what seemed like the logical approach to reset to factory settings, I have
    seem to have accidentally deleted the data on the disk.

    I have now repeatedly received the error message "Reboot and select proper boot device."

    I tried the F12 approach to , but my Start Menu does not have this option.

    I'm frustrated that the new laptop played if bad, given that I have had Toshiba devices for about 10 years.
    In addition, I am disappointed that potentially serious consequences to remove the drive were clearly deprecated for me, before you start.

    Please give us a solution.
    The laptop is 4 months old.

    In addition, how can I start the process of an application under my warranty?
    A dissatisfied customer of experience to date.

    Kind regards

    CGI

    I seem to have accidentally deleted the data on the disk.

    Obviously the HARD drive recovery procedure is not possible now because the HARD drive recovery files have been deleted.

    I guess you have not created such recovery media as recommended in the user's manual.

    Well, in this case, you have a chance to order a missing middle of recovery and recover the laptop to factory condition.

    Means of recovery can be ordered here:
    http://backupmedia.Toshiba.EU/landing.aspx

  • my XP is not booting (white screen) and crashes at isapnp.sys then in safe mode.

    My XP Home Edition is not booting (white screen) and crashes at isapnp.sys then in safe mode. Please help as soon as possible because I need this platform for school!

    What is your system brand and model?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    The afflicted system has a CD/DVD drive work?

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

    The symptom often means that your system is of a malicious software.

    With this particular symptom of hanging on isapnp.sys in Mode safe is to search for a driver of zero-byte length file in the c:\windows\system32\drivers folder.

    Of course, you have to boot the system on something in order to access the hard drive to find the suspicious file and get rid of it.

    If you have any installation CD bootable XP real where you start in the XP Recovery Console, or you are not sure what type of bootable CD, you have,
    make a CD of bootable XP Recovery Console or Hiren Boot CD and don't forget.

    There is no XP media needed to make a Hiren Boot CD or a bootable XP Recovery Console.  You can access the folder and check if
    There is this action suspect file and take.

    Once you're booted to the CD of your choice, navigate to the following folder (assuming that XP is installed on your C volume):

    c:\Windows\System32\Drivers

    Looking for a file that ends with an extension .sys and zero bytes in length.  The file can also have a curious name because she may have been generated at random.

    If you are in the XP Recovery Console, issue the following command in the c:\windows\system32\drivers folder:

    dir *.sys

    Files Scrolls one screen at a time.  Look at the list of files with .sys extensions and their lengths.  You don't need to
    worry about directories...  If you see a file with a .sys extension which is zero byte, it is suspect.

    If you use just the Mini XP Mode a Hiren boot CD (which works as Office XP), navigate to the folder of the my
    Computer desktop icon and locates the suspect files.

    You really want to remove the suspicious file once you get running and you run some scans for malware, but if you are
    not sure what is the suspicious file or if it might be necessary, just rename the suspicious file for now, in case you are not sure.

    For example, if you find zigxrtml.sys folder had a length of zero byte, rename it:

    Rename zigxrtml.sys zigxrtml.bad

    Renaming or removing the suspicious file to get the system running is not resolved the problem.  It is the symptom of the problem.

    The problem is your system is infected by malicious software and you should always follow up with a few scans to remove infections.

    Once your system is running, followed with MBAM and SAS to be sure that the affliction has really been removed.

    Reduce the risk of malware by running some scans.

    Download, install, update and do a full scan with these free malware detection programs can solve any problems:

    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

    It can be uninstalled later if you wish.

    The scans by operating clean, restart, test your task manager and we can repair any other pending issues.

    Do, or do not. There is no test.

    I decided to implement the points for a new puppy instead of a pony!

  • Whenever I try to delete a file or display a folder, explorer.exe keeps freezing and crashing.

    Hello

    Whenever I try to delete a file or display a folder, explorer.exe keeps freezing and crashing. I tried SFC/scannow, and he found that he could not repair the corrupted files. I also tried to use a boot disk to fix my OS, but he said he had "no problems found".
    Please answer as soon as POSSIBLE. Thank you.

    Use chkdsk /f and sfc/scannow and reboot several times.

    Sometimes it takes more pases.

  • Windows installs until the end of the installation, bar goes through 3/4 of the way down and crashes.

    * Original title: Windows 7 Professional instsll

    Bringing to husbands machine until windows 7 Professional 64-bit windows vista

    as custom instslled since then couldn't upgrade version of vista that he had

    winfows installs until the end of the installation, bar goes through 3/4 of the way down and crashes

    has tried the f8 combo command but to reboot the installation all over again and just sitting here watching the installation goes nowhere

    plan to leave overnight this time

    any suggestions?

    If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  • HP m9500z is crushed, able to reboot and restore, now no start HP screen, just hangs

    HP m9500z is crushed, able to reboot and restore, now no start HP screen, just hangs. After disconnecting the power for several hours, I was able to get the system running, ran scans disk for errors, no problem.  a few minutes after vista is that it crashed again.  When you restart the fans launched full speed, no start hp at the start screen, nothing.  I tried to reset the CMOS using the jumper trick, nothing.  removed the battery, nothing.  I even tried the blind stuff, I have seen suggested, as pressing F10 for 8 seconds, etc..  during one of the last times before that it's totally off I ran the diagnostic of the system BIOS, everything was fine.  I think I have a corrupted bios.  Any ideas? Could be a motherboard fried, but I hope that its not so bad.  Product num nh836av-aba.

    From your description, I would unplug the video card and the video shipped by train.  The specifications of your mb should be these: http://support.hp.com/us-en/document/c01635688

    Please make sure you have an esd protection and immerse in your unit without first physically disconnect power to the wall outlet

  • App download at CC stuck and crashed to 42%. No error number announced. What should do?

    I try to install PS CC 2015 on my MacBook Pro and it always stop and crashed to 42% download (after extraction).

    I tried CC cleaner, reading diary after the ERROR and FAILURE. Tried to reboot the computer on safe but not mode does not work. I think it's a problem or an installation error

    The same thing happens when I try to install manually. (I tried with InDesign and Adobe After Effects, same result).

    I really need the software for study and work, someone has a light of a desperate man?

    I already think about erasing everything in my computer and reinstall mac os x.

    Still have some hope in me.

    Hello

    Greetings from Adobe!

    I ask that you contact us please contact customer service

    Kind regards

    Gary singh

  • Premiere Pro cc 2015 render freezes and crashes my pc

    Hi... while making with Premiere Pro, After Effects and the Media Encoder my workstation (dell Dual Xeon t5400, 24 GB ram, Quadro K4000) freezes and crashes and I have to force a reboot...

    I downloaded a shot when the accident happens: I don't ' t think it's an overheating problem (these reports are reliable?)

    I also ran a RAM test... but everything was ok

    I use Avid on the same workstation and I have no problem then that rendered

    Any suggestion?

    Thank you!

    Max

    001.jpg

    Hello! It was a problem of overheating... open the folder and put a fan... and now I can give without accidents

    Thank you very much for your help!

    Max

  • When I click on the 'Get' button in the app store for El Capitan, the beachball cursor rises and crashes the app store (not responding) in the force quit window...

    When I click on the 'Get' button in the app store for El Capitan, the beachball cursor rises and crashes the app store (not responding) in the force quit window...

    How can I fix it?

    Nevermind, I restarted the computer and it was fixed

  • Firefox has been a problem and crashed

    I had this "Firefox has a problem and crashed," started this morning. It overwrites every time when I tried to start it, even with safe mode. I tried to uninstall and reinstall Firefox. But it does not solve the problem. Here is the list of the crush reports:
    BP-24ed344a-6d03-4341-aa9d-f3c6f2140917
    BP-3c53dc49-c3d3-4222-80bf-be77d2140917
    BP-1d35cd40-C223-45E2-9395-87b7b2140917
    BP-1b0956a8-6329-4FE7-8174-3282c2140917
    BP-dc1cf498-839a-41d1-B485-cc3b82140917
    Help, please! Thank you!

    Hello, please report to us with your crash id. This seems to be quite prolific start at this time crash. other affected users have reported that it is solvable by a clean reinstall:

    1. Please try to uninstall firefox from the system control panel.
    2. then go to the firefox program folder (usually located in C:\Program Files (x 86) \Mozilla Firefox) and delete the rest of the firefox program folder everything manually
    3. later and try reinstalling the browser with a new copy of https://www.mozilla.org/firefox/all/

Maybe you are looking for