Random reboots and crashes with WUDFRd failed to load of the device

Similar Questions

• The driver \Driver\AFAmgt failed to load for the device USBSTOR

  Hardware: Dell PowerEdge R515, AMD Opteron processor

  OS: Windows Server 2008 R2 (64-bit)
  Peripheral USB do not work properly.  Manager devices displays the following error:
  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)
  The observer of events displays the following error has occurred when I plugged the USB key:
  Error in kernel-Pnp, event ID 219
  The driver \Driver\AFAmgt failed to load for the device \Disk&Ven_SanDisk&Prod_Cruzer&Rev_1.02\2006077523163E6032E3&0 USBSTOR.
  Dell recommended running the following updates:

  1 HLDS DP10N external USB DVD Firmware Version A102, A02, published 06/03/12, hard drive option: http://downloads.dell.com/FOLDER98923M/11/HLDS_DP10N-EXTERNAL-USB-DVD-_A02_R318499.exe

  2 AMD SP5100 South Bridge Driver, Version 5.10.10, A00, published 10-22-2010, recommended Windows 2003 x 32 / x 64: http://ftp.us.dell.com/chipset/AMD_SP5100-SOUTH-BRIDGE_A00R262335.EXE (this one may or may not work, initially, the driver is for Server 2003 and I'm not 100% sure if they added 2008 R2 compatibility.)

  3 TEAC DV - 28 s-W 12.7 tray SATA 8 x DVD - ROM Firmware, Version R.2B, A01, published on 26/07/11, recommended problem resolves under RHEL 5 and 6 of RHEL which can cause the Machine error check on PowerEdge server platforms.  Windows & Dos: http://ftp.us.dell.com/rmsd/TEAC_DV-28S-W-12-7-TRAY-SATA_A01_R309483.exe (this one is one I think will do the most good.)

  Any other suggestions?

  Hello

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows Server and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope this helps.

• Qosmio X 770-BSODS and Crash Dump driver failed to load

  Hello

  I have a Qosmio X 770 and his blue screening occasioanly but I can't find out why as the crash dump driver fails to load at startup.

  I gave google and tried to recreate the page, Delete file, it restart, rebuild again, affecting also devote dumpfile in the registry and still at every start I receive event ID 45

  The system could not sucessfully load the crash dump driver.

  I ran SFC and all files are very well

  Windows 7 64 bit, core operating system

  someone at - it ideas?

  Thank you

  Found a user who had the same problem with the dump file, and this could be solved by deleting the swap file, and then restore and after that seems to have solved the problem...

• Flight Simulator panels and add on models fails to load on the main screen

  Original title: problem FSX and windows

  Some of the panels such as the F-18 and add it on the templates may not appear or do not come up on top of the screen when picked up. I just reinstalled windows and do not know what happened during the installation. I'm not sure if all the main files are missing for something wasn't going to install it. I run FSX with acceleration pack and is a 32-bit microsoft windows xp.

  Hi United869,
   
  Try these steps and check the result.
  Step 1: Download and install the drivers for Windows XP-compatible video card.
  a. visit the video card or the system manufacturer's Web site to download the driver.
  b. install the driver and restart the computer for the changes to take effect.
  c. start the game and check the difference.
   
  Step 2: Adjust display settings
  a. right click on the desktop, click on properties.
  b. click on the settings tab and adjust the screen resolution at best.
  c. click ok to apply the changes.
   
  Step 3: If the problem persists, reduce the game to the minimum settings. To do this, follow these steps:
  a. start the game.
  b. click on settings.
  c. click Reset defaults.
   
  See Troubleshooting of problems in Flight Simulator X graphics
  Step 4: Check the Windows updates to see if there are updates available for flight simulator
  a. see using Windows Update for Windows XP

  See Solutions for the Flight Simulator Centre

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.

  WUDFRd failed to load of the device

  Hello

  I did a clean install of Windows 7 64 bit and everything goes fine until I started to add the specific drivers of lenovo t61p.  I get the following in the Event Viewer error message:

  The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.

  After a lot of Googling, I found that the usb device is a fingerprint reader.  remove the fingerprint reader drivers removes the error in Event Viewer.

  AuthenTec TouchChip fingerprint coprocessor uses the v1.5.0.289 driver.  their website States that the error is a problem with Microsoft.  See this link:

  http://support.AuthenTec.com/Knowledgebase/KBview/tabid/843/ArticleID/443/WUDFRd-failed-to-load-for-the-Device.aspx, or search their Knowledge Base for "WUDFRd failed to load for the device.

  I see that the other members of the forum answers have similar problems, but they still have to find a solution.  is that someone in Microsoft could provide an update for a fix?

  Yes! After two years, I found a solution.  I installed a previous version of Lenovo sw fp and it fixes attention on win 7 sp1 2 t60.  I've been running for about 3 weeks and warning went on two PCs. then, download and install IN1FGP08WW1.exe.  It is fp s-o of Lenovo in UTEK and there the pilot to clear the warning.  BUT it's not as safe as the current Lenovo sw fp.  Apparently, she was abandoned when authentic bought UTEK because of this.  as I understand it, if someone has physical access to your pc they can decifer pw of windows in the registry.  This isn't a big problem for me.

• Cut random downs and crashes. Computer laptop closing at startup. No virus, what is - this?

  A few months my computer has been acting crazy. Lately, it is essential, it is closed right after it starts. Another thing, it tends to do is to enter a State of low power (not in standby or Hibernate), with all the lights and power always, by discoloration to a black screen. I tried every key sequence to bring my screen, but it never does, so I find myself manually shut down my computer in now the power button. Last night I shut down my computer and as I turned it on this morning I had the 'blue screen of death '. I have no virus and I'm starting to think that this has something to do with the inner workings of my computer (things that I have no idea about). I don't know if I need new drivers, need to clean my registry, I've already defragged my computer, or if I have a chance to save my laptop.

  I also don't have any specs on my computer and don't know how to find them or the other. These problems that I said start to become a great inconvenience, but I have a bunch of stuff saved on my computer, so it is difficult for me to move on to the other laptop I have for my daily use. ANY help would be greatly appreciated, I'm desperate!

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  To be able to remove ALL and reinstall all the cables (both ends), card and memory - really remove
  and replace - do not just tight. Remove the dust bunnies and clean the vents. Check that the
  fans of work (before and after opening the case). If a laptop on what you can do is reinstall
  memory and clean the ventilation openings (still may try to add a small fan as a test).

  ===========================================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  You can use Mode without fail - repeatedly tap F8 that you start?

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Satellite Pro M10 freeze and crash with some programs

  Hello

  I have a M10 Pro Satellite...
  A few weeks ago it's freeze and crash with some programs like wmpayer, messenger... I delivered to the authorized agent and they had not detected any problems.
  Already I have formatted several times, but the problem persists.

  Any idea what this may be?

  Thank you

  Hello

  For me it looks like you might have a motherboard problem. Formatting removes the chance that it is a software problem. Try taking 1 stick of RAM and test with it. If she continues to crash, remove that stick and try it. If she does it with the two RAM then those who are ok. HARD drive is not the culprit, so now he could either be processor or MB. Find a program to measure the heat from the laptop and run some heavy programs do overheat. If the temperature goes up and then it crashes, it could just be overheating. If it continues without overheating you either have a CPU or MB problem. I hope this helps.

• Satellite A100-225 keeps freezing and crashing with the new HARD drive

  Hi all

  I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

  I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

  I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

  Thank you

  Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
  In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

  I can't say for sure, but there must be a compatibility problem.

  Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

  Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

• How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now?

  How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3.  I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1.  Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS.  Any suggestions, much appreciated.

  OS X El Capitan: revert to a previous version of OS X

• How can I fix the "Windows failed to load because the system registry file is missing or corrupt.'

  all of a sudden my computer goes from fine to a "Windows failed to load because the system registry file is missing or corrupt."

  and I don't have any idea how to resolve this its driving me crazy.

  I downloaded the iso file for vista, the restore disc but it not start when I restart my computer. what im supposed to do or am I missing something?

  You need to change the boot sequence:

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  Hello - anyone can help me find a solution to my problem?

  My problem: Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  I tried everything the sytem advised through SafeMode etc... Also, I tried to reload my OS - last updated through the windows update site. However, he did not - probably because all updates from MS, which means that it would not load from the DVD.

  It's a whole new system customized with MS Vista 64 bit, Office 2007 Untimate, Asus MB, 250 GB HD ATI video card. I used Vista for almost a year and had no problems until today. All of the original software.

  I have my thesis and several files, I was working on someone - I was doing consulting work to supplement my income as a student... Unfortunately, when I finally used my system last night it was ok. Now I canoe get my system up and running.

  Mark Merci for your comments.

  I found myself communicating directly with Microsoft and they were able to get my system up and running without losing me data. Hooray for Microsoft!

  My system is back to normal and I am assuring you that all my files are backed up on DVD.

• "windows failed to load because the nls data is missing or corrupted"

  IM currently using vista, and when I turn on my computer
  the following message appears: "windows failed to load because the nls data is missing or corrupted"

  What does this mean message?

  that means "nls"?
  is my information on my hard drive in danger?
  How can I fix?

  Recovery discs would be Windows Vista installation files.  It would be safe to use if they are needed when the sfc/scannow scanning.

  A recovery disc is a general term for media containing a backup State initial factory or a favorable condition of a computer such as configured by an OEM manufacturer or an end user. OEM supplied recovery media is usually comes with most computers to allow the user to reformat the hard drive and reinstall the operating system and preloaded software as it was when it was shipped.

  http://en.Wikipedia.org/wiki/Recovery_disc

• Sony VGN - NR160E Ultimate laptop. w / Windows 7 Ultimate, failed to load because the c:\windows\system32\drivers\elxstor.sys of the 5.2.10.211 file is corrupted or missing

  I have a laptop VGN-NR160E Sony with an Intel Core 2 Duo T5250 / 1.5 GHz with Vista OEM. It has been upgraded to Windows 7 Ultimate. The former owner has not only any disk, therefore, or I'm doing. I have after I tried to update and got an error this system failed to load because the c:\windows\system32\drivers\elxstor.sys of 5.2.10.211, the file is damaged or missing, I tried all the computer in repair and drives the ISO of Windows 7 options, I need help by someone much more intelligent and savvy than me in computer science.

  You have a pirated copy of Windows 7 Ultimate on your system. You must install a genuine copy.

• Windows failed to load because the system registry file is missing or corrupt. - status0xc000014c (Windows vista}

  Windows failed to load because the registry file is missing or corrupt... status 0xc000014c

  Hello

  1. have you made changes on the computer before this problem?

  2. are you able to boot mode safe?

  I suggest you perform System Recovery Options startup repair and check if it helps.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  For more information, see the following Microsoft article.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope the information is useful.

• problems of registry Vista-"windows failed to load because the system registry file is missing or corrupt"

  introduced a new card mother but used to winows full vista it tells me "windows failed to load because the system registry file is missing or corrupt" I can't fix it some trys to reinstall nothing helps, what I do is never had this problem b4?

  my disk is scratched then put xp on site