Rebooted the laptop and returned to his old Version

Similar Questions

• After I install my laptop bootcamp has restarted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked the scores he had only a mac partition

  After installing bootcamp my laptop has rebooted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked partitions there was only a mac partition and I can't get back the deleted memory

  Post a screenshot of what shows utility disk to disk

  How to take a screenshot on your Mac - Apple Support

  OSX works OK?

• I have a G62-355DX laptop and is 11 months old. and it won't start. It has error codes

  I have a G62-355DX laptop and is 11 months old. and it won't start. There error codes when I do a test of the system. DST short: failure failure ID: RTX6T9-5B75S5-XD003F - S 60, 903.

  Product ID: XH068UA #ABA

  Hello

  As the error code relates to a short drive Self Test failure - the only real solution to this is to replace the hard drive.

  As your laptop is still under warranty, contact HP to make arrangements for the replaced disk.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Unknown device on network adapter between the laptop and the wireless router

  I am running windows 7 64 bit on a laptop computer connected wireless to the router and internet.  The router is Linksys WRT160N connected to the internet.  The map of the network, there is a question mark device unknown between the laptop and the router.  However, I still have access to the internet.  In terms of network, if I hover over the laptop, it does not show an IP address.  It only shows the name of the computer and its MAC address.  Any help would be appreciated.

  Solved my problem.  I checked the button of the IPv6 protocol in the properties of a network connection on the laptop, and now I can see it's the IP address and the unknown device has been replaced by a switch and hub which is part of the router.   I do not uncheck the button IPV4.  I'm guessing that it is a bug in Windows 7 that you need to cut of ipV6 Protocol when you have a Win XP computer on the network if you want to see a map of own network.  As I said before, everything worked before, so this seems to be a cosmetic fix only.  I see that my shared files on the XP computer appear faster after a reboot.

• take files from a backup of the laptop and put it on windows 7 / firefox

  My laptop has been cut. I would like to take files from a backup made a few months ago on the laptop - and put them on an upgrade to windows 7. I want only a few files and my tax file is on the computer of windows 7 (from the laptop). I don't know what would happen if the laptop backup C D has been placed in the windows 7 computer.

  Mozilla Firefox stores all your personal settings, such as bookmarks, passwords and extensions, in a profile folder on your computer, in a separate place from the Firefox program.

  Profile backup and restore

  • http://KB.mozillazine.org/Profile_backup
  • https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I need to transfer my history of the text and images from my old iPhone to my new iPhone, but have already moved all other data to my new phone via iTunes and spent time to organize.  How do I reset this transfer without any?

  I need to transfer my history of the text and images from my old iPhone to my new iPhone, but have already moved all other data to my new phone via iTunes and spent time to organize.  How do I reset this transfer without any?  I transfer a 5s to itself.

  For your photos, try importing them to your computer and their synchronization then back to the SE.

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

  For your texts, they moved with the backup restore?

• When I put the time, she can use the internet, she changes the time on the computer and returns on the internet. What can I do?

  When I put the time, she can use the internet, she changes the time on the computer and returns on the internet.  What can I do?

  Not enough information.  You have provided no context.  You don't say what version of Windows you are using and you don't really describe the situation in many details.  Reading between the lines, it looks like you have a child who has time on the Internet you want to limit.  You do not tell us what tools you use to control this limit online, so it is difficult to recommend the right forum for your post.  Please update your message with a more detailed description of what is happening and what you want to do.

  One thing that comes to mind is using Live Parental control with a Netgear router.  See http://www.netgear.com/lpc.  LPC uses the service OpenDNS (http://www.opendns.com/)

• has deleted part of the key of windows vista which has been integrated with the laptop and when I start the laptop it asks activation, what to do, please give solutions

  the sticker on my laptop has disappeared/deleted and I am not able to see the full key for windows vista operating system has been pre-installed on the laptop and now she asks activation and I did not quite correct key because he got faded/deleted, how can I get the key to work on the laptop I have compaq-presario-cq60-420 US laptop.please help me or give me the microsoft contact numbers where I can get my key of windows vista back by providing the serial number and the product number for my laptop.  I am unable to work as the laptop does not work without the activation key.

  Hello

  You can use a magnifying glass and a flashlight to see if you can read the numbers of the product key on the label.

  Or take a picture of it and expand it on the screen.

  ______________________________________________________________

  Also that, read also:

  You can contact your computer manufacturer and ask them to send you a set of recovery disks and to reinstall the operating system.

  They should do this for a fee, if they still have available to them.

  _____________________________________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  ____________________________________________________________

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  The methods above resettlement generally do not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.

  See you soon.

• When I connect my laptop L300D to my LCD tv using VGA to VGA it works fine for a few minutes then the screens n that the laptop and TV started blinking on and outside. Can someone advise please.

  When I connect my Toshiba L300D laptop to my Samsung 40 inch lcd tv using vga to vga connection it works fine for a few minutes. Then the screens on the laptop and the TV start to turn on and turn off, also jumps around cursor. Can someone tell me what is the problem and how to correct.

  Hello

  Try changing the VGA cables and check if it helps.

  If the problem persists, then I suggest you to update the firmware.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Windows Mail will not delete e-mails unless I leave the foder and return

  Windows Mail will not delete e-mails unless I leave the foder and return. never had this happen before. I have another email

  accounts and they work fine.

  Try to compact and repair the database.

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

• I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve the issues___Thanks__Peter

  I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve problems

  Thank you
  Peter

  Hello

  The easiest way is with a crossover cable - a special wire to connect the two systems.
  You can get one at your local computer store - they are not expensive.

  Also check with the site of the manufacturer of your router, because they will have in-depth details on how to
  set up the network.

  ====================================

  Or you can set up a wired or wireless network.

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Ad-hoc networking
  http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
  Set up a computer-to-computer (ad hoc) network
  http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspx

  How to set up an Ad Hoc wireless network in Windows Vista
  http://www.home-network-help.com/ad-hoc-wireless.html

  Create an ad hoc WiFi network secure on Windows Vista
  http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htm

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• (Redirected) Power adapter green light turns off when the laptop battery is plugged into the laptop and does not load.

  Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Tip: when you post a message, preferable to always include the computer model.

  Bev.

• of the laptop and monitor external both go to a black screen

  OK, I have a laptop Toshiba Satellite L675D and monitor external lg I've used for more than a year. the problem I knew it is that when I turn on my external monitor both the monitor to the laptop and external monitor goes to a black screen and to get the office page I have to turn off the monitor external and in a few seconds, the computer desktop computer laptop monitor will reappear. Fault could be the problem?

  Hello

  1. What is the model of the LG external screen?

  2. have you made changes on the computer recently?

  3. have you installed all the updates on the computer?

  Method 1.

  Connect the external monitor to a different computer and check if it works.

  Method 2.

  I suggest to update the graphics drive and check if that helps.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Refer.

  Move windows between multiple monitors: http://windows.microsoft.com/en-US/windows7/Move-windows-between-multiple-monitors

  Setting up dual monitor: two screens are better than one:
  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Guided Help: Setup dual monitor is easy in Windows 7:
  http://support.Microsoft.com/kb/976064

  I hope this helps.

• Illustrator art Council moves to the right of the app and disappears. I'd appreciate the help. I rebooted the software and then my macbook pro, nothing helps.

  Illustrator art Council moves to the right of the app and disappears. I'd appreciate the help. I rebooted the software and then my macbook pro, nothing works

  [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

  MacBook is the material.

  Is what system this?

  Any improvements installed in the system? Well is the material?

• I have upgraded to Windows 10 64 Pro and all my apps Adobe has stopped working; I get the popular "MSVCP110.dll is missing" issue; I uninstalled everything, including the creative cloud, rebooted the PC and installed it back again! Same thing! I tried thi

  I have upgraded to Windows 10 64 Pro and all my apps Adobe has stopped working; I get the popular "MSVCP110.dll is missing" issue; I uninstalled everything, including the creative cloud, rebooted the PC and installed it back again! Same thing! I tried this several times. I'm really stuck! Can someone help with how this is solved; I follow online (two solutions) and tried both; not good! No matter what I do, I get the error! The rest of the applications say they are absent from the other files like this; It seems that there is something to do during the installation that keeps this issue alive!

  Run the command to check the file system once:

  https://support.Microsoft.com/en-in/KB/929833

  Also repair Microsoft Redistributable packages from the control panel > programs and features.

  If not installed, download and install the Visual C++ 2013 package.

  Let me know if you need more assistance.