Rebuild the eve in 9i

Similar Questions

• Failover and rebuild the eve

  Hello
  
  To verify if the standby PB works perfectly in case of failure, we go to our database before failover. Swicthover_status replied with swicthover not allowed in elementary school, I decided the procedure below:
  
  1. judgment of the primary DB.
  
  2. turn the main eve
  
  3 perform dml on new primary, when the work is done, the new principal will not be necessary.
  
  Now my task is, if I'm doing a cold backup of db pending before making primary, can I replace the backup to cold after the task so that it behaves like db Eve as it was before? In this case, I don't need to recreate the standby db.
  
  Kind regards

  Hello;

  Probably not. You have several questions. This method is likely to worse instead of better. If you want to test failover to bring flashback working on the primaries and the sides of the day before.

  After a failover, you want to retrieve primary school, the old primary as new secondary. Once it is functional, you get two SYNCHRONIZED servers and perform a failover and primary school and the day before are back the way they should be.

  I test short notes here:

  http://www.Visi.com/~mseberg/data_guard/Data_Guard_Failover_Test_using_SQL.PDF

  Update

  What you might consider is the method of cold backup is a false test. This isn't how he'll get into the real world. In my view, that the test should align as closely to what could happen in production as possible.

  Failover is also something you should give a lot of thought to. I have databases where if the power failure is about 5 minutes or less the failover is more trouble and more risk than its worth. I have other where they need to be in place 24/7. Ask yourself if you can make a move to the square. What are your other options? Its great to have a failover plan and be prepared, but less use you it the better I say.

  Best regards

  mseberg

  Published by: mseberg on March 27, 2013 07:15

• parameters of the system does not move on the eve of the database

  Platform: IBM AIX 7.1
  Oracle: 11.2.0.3
  Product: DG w/FSFO (dgbroker)
  ========================
  
  Question is why some initialization parameters go to the backup database and others not?
  How can I determine which is transferred and which do not?
  
  Example: change the system '_optim_peek_user_binds' setting is false scope = both;. < == dynamic parameter
  
  and: change processes control system = 1000 scope = spfile; < == require restart
  
  
  
  On the same topic, when I rebuild my standby database using the current database.
  
  The RMAN command reference: duplicate target database for the eve of the active database
  
  Also, it does not transfer parameters initialization as "sessions", "processes" and in our case, a hidden parameter ("_optim_peek_user_binds" = false).
  
  How can I determine what will transfer and what will not transfer?
  This little us twice in the last week when we switched to standby and then "turned" on our rebuilt on primary eve.
  
  Thanks in advance for any suggestions you may have.

  Yes, instance settings are instance/session (dynamic) specific.
  Suppose that little of the example, of course, there isn't a good example also. Still to convince ;-)

  If you have 2 tie, with shared SPFILE unique, if you tell the parameter SGA_TARGET if you have to load in a server support more or less in another node in database, if you decode to increase only on node 1, you can then change in node 1 without changing the setting globally as

  SQL > alter system set SGA_TARGET = 12000 m scope = the two sid = "prod1".
  SQL > alter system set SGA_TARGET = 8000 m scope = "prod2".

  So you can have multiple values for two instances... Here is therefore the parameters are specific instance. Do you agree?

  Refer also to extract all the parameters http://hemantoracledba.blogspot.in/2011/05/getting-all-instance-parameters.html?m=1

• Rebuild the basis of Standby hot backup existing

  Hi all
  
  I'm rebuilding the database of existing sleep using the current hot backup because of the huge gap between the primary and Standby, which cannot be restored by backup team
  
  Can someone please explian the steps to perform this activity.
  
  Oracle-9i version
  
  The size of the database - 50 GB
  
  Hot - Latest backup
  
  Kind regards
  RAM.

  Follow the same process as that used to create the eve of the first.

  http://download.Oracle.com/docs/CD/B10501_01/server.920/a96653/create_ps.htm#67525

  Skip the steps that should not be remade - for example to create the parameter file for the standby, the configuration of the listener and tnsnames, entries that you already have, etc.

  Hemant K Collette

• I followed these steps several times, but he still has to work to rebuild the index.  Is there something else in the way of this work?

  Have you tried to rebuild the index spotlight several times, but it didn't work. I followed the steps through the system preferences, but there is no result for the rebuilding of the index.  Is there another way to do it, or is there another problem preventing it from working?

  Do you mean the following steps:

  Rebuild the index on your Mac - Apple Support Spotlight

• How to rebuild the mailboxes after the 'fixing' mail closes unexpectedly

  How do I rebuild my smart mailboxes?

  I lost all emails after fixing Mail stop unexpectedly

  Try to rebuild the mailbox.

  Rebuild the mailbox

  If this does not work, try re-indexing of mailboxes mailbox. This can take some time if you have a lot of mail.

  Reindex messages        For El Capitan, try looking in V3.

  Reindex messages (2)        See post by Linc Davis

• Cannot rebuild the desktop

  Hello. I have a MacBook MB062LL/A (2,1-1181) running OS x 10.6.8 .tI was a little wide, slow running and other things. I just bought it used off eBay. The HD has been wiped clean with a new installation of the operating system (when I started I was greeted with the screen "familiar" multilingual) so he must be a Virgin installation (although Safari has quite a few cookies), but he continues to slow down really bad. I have reset the PRAM (Command-Option-P-R during startup) and I tried to rebuild the desktop (command-Optiom at the start), but it asks me if I want to rebuild the desktop. Can someone advise me? TIA.

  1. There is no office to rebuild in Mac OS X; This is a feature of Mac OS 9-era no equivalent Mac OS X.

  2. restart with the keys Option, command, P, and R keys.

  The answer above was copied and pasted from a previous post of Niel. rebuild the desktop for OS 10.6.8

  Maybe if you want to be more specific about your problem we move upward with a few suggestions. A report of EtreCheck can help http://etrecheck.com/

• Satellite l.660-12 q - would the recovery disk rebuild the new HARD disk with a new recovery partition

  Talk about confusion. Does anyone know how to get a Toshiba C660 work after the HARD drive failed and the owner has stupidly NOT followed the instructions to make a recovery disk. Will be the recovery disk (if buy you one from Toshiba) rebuild the new HARD disk with a new recovery partition and install windows 7 (original OS) and accept the product key printed on the Windows license, attached to the base of the laptop. I have read a number of suggestions, but these have been considered incorrect by others.

  Surely, Toshiba must have a way to sort this problem.

  They read these messages?

  Hey Buddy

  I don't think it's really complicated, that I could find all the information about the recovery procedure in the user's manual

  The recovery disk must be created on the first day of purchase its recommended to create one in case something would be wrong with the HARD drive.

  The recovery disk contains an image. The image is a package containing Win system, drivers, tools and all the stuff pre-installed on the notebook.
  You bought the laptop and the system has already been activated so that you have need of t the key placed at the bottom of the unit.
  In addition, the use of the recovery disc formats the drive HARD integer (partitions too) and set the laptop in the same condition as at the first day of the purchase.

  There is also another option to recover the notebook called HARD drive recovery. This HARD drive recovery requires no recovery disk. The recovery disc HARD would be to use format ONLY partition C (System).

• rebuild the desktop for OS 10.6.8

  How to rebuild the desktop and reset PRAM Imac OS 10.6.8?

  1. There is no office to rebuild in Mac OS X; This is a feature of Mac OS 9-era no equivalent Mac OS X.

  2. restart with the keys Option, command, P, and R keys.

  (138701)

• Impossible to rebuild the boot.ini

  I have a computer infected by the virus from system tools. I was about to make the procedure of McAfee to clean off when I met the msg of bad boot.ini with:

  \system32\hall.dll
  I see that this is a problem common - and followed the instructions to start Windows Recovery, go to the repair and try to rebuild the boot.ini file. But it does not work.
  bootcfg/list gives: there is currently none available to show the startup entries
  bootcfg /Scan research yields: error: failure of analysis facilities of Windows disks successfully. This error can be caused by a corrupted... FileSystem etc.
  CHKDSK gives: the volume appears to contain one or more unrecoverable problems.
  Help, please.

  I hope that you are able to solve the problem. However, to be perfectly honest, I think that the hard drive is done. I could be wrong, and it would not be the first time.

  The picture on the link below, it's what you should see when you enter the recovery console.
  http://img46.imageshack.us/i/recoveryconsole.jpg/

• How to rebuild the icon cache

  How to rebuild the icon cache? My icons randomly change on my computer.

  Hi ErikaVR,
   
  -Did you of recent changes made to your computer before this problem?
   
  This behavior can occur if the icon cache is not properly updated.
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
   
  Follow the steps listed in this article to resolve the problem:
  Icons randomly change to different icons

• How to rebuild the shop catalog of Vista drivers to BYPASS the black screen!

  I need help to rebuild the secure boot shop, this is the only way to get around the black screen...

  How to restore the original display drivers!

  Safe mode does not work

  CTL-Alt-Del does not bring a window to run the Explorer or

  Note: only this, already have SFC, CHKDSK and several other tests!

  Thank you to all who share this problem

  Help, please

  Hello

  To help you better, please answer these questions.

  1. what happens when you try to go to Safe Mode?

  2. are you able to boot to the desktop?

  3. What is the brand and model of the computer?

  4 have had any changes made on the computer before the show?

  I suggest you follow the provided methods to solve the problem.

  Method 1: Run a system recovery options system restore:

  http://Windows.Microsoft.com/en-in/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 2: Start the computer in low resolution Mode.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-in/Windows-Vista/advanced-startup-options-including-safe-mode

  Note: follow the section that talks about allow low resolution.

  Method 3: Update the display drivers once you start on the desktop.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also recommend to download latest display drivers on the manufacturer's Web site.

  For your reference:

  About the driver catalog

  http://TechNet.Microsoft.com/en-in/library/bb693493.aspx

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• (Repair) virus killed file system; What is the best way to rebuild the system?

  System of Vista Business 32 bit SP2 from my child was hit in the wrong by a virus; When you run the repair virsu he deleted system files infected and he now gets repeat BSOD.

  No, the Startup Repair is not going to fix the system, and the virus seems to have killed all the restore points. also can not get SFC / SCANNOW to run correctly.

  So: I went to (a huge field of) struggling to set up a Slipstream installation DVD of Vista SP2 (since the original installation disc supplied with the system was only vanilla Vista).  I thought that I could load that and select the 'Upgrade' option and simply rebuild the Windows system, keeping all my programs and data.

  But no, after loading, the system informed me that "upgrade has been disabled", as well as the comment for clarification: "-to update, launch the windows installation"-that sure I can "t do since I can't display the corrupt system virus even in safe mode.

  SO - I have a few questions:

  (1) FIRST: was first my hypothesis?  In other words, if I COULD bring up Windows on the machine damaged (even if only in safe mode), would be the upgrade, go ahead and work - whereas the old system corrupted virus was also VISTA SP2?  Or - the installation would inform me that he could NOT make an upgrade because it would detect that the previous version was indeed also VISTA SP2 and therefore "knowledge" that he could not (really) do an upgrade?

  (2) assuming that the answer to #1 is 'yes', then: is there a version of Vista Installable (same one I might need to buy) that could make the upgrade, even if the Windows system being upgraded can not come?  IF this is NOT the case: what is an installable version upgrade of Windows 7?  or it is the sad reality that no matter what version of Windows I buy, I can't choose the 'Upgrade' option unless the installation is load/run Windows on the upgraded system?

  From previous posts, I have all kinds of good advice on how to retrieve data on corrupted system files, so if there is no other alternative, I'll do it - but this is my last resort because:

  b its a lot of your time working are going to extract all the files and

  (b) his work even more of your time then having to charge all third party software (including some I have no disks to install for more) if I find myself

  having to do a clean install of Windows.

  So, if there is no alternative to an upgrade - if I have to shell out some $$ for a new version of Windows, I prefer to do that.

  Appreciate all advice-

  Hello RDougShelton,

  Take a look at the following article:

  Cleaning a compromised system
  http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  If there is a virus on that system, in other words, there is no way to be always sure that she has been completely removed outside of the shaping machine and put it back.

  There is no guarantee that an inplace upgrade will fix this problem.

  I recommend to backup your data you mentioned in your original post.

  Best regards

  Matthew_Ha

• How to stop automatically rebuild the index

  How to stop windows from automatically rebuild the index; I am running vista sp2?  it restarts just as soon as he completed which makes my ability to get something useless

  Hi deblee99,

  -How long have you had this problem?

  -What software changes you did on the computer before the show?

  Follow these steps:

  Method 1:

   

  Follow these steps:

  Step 1:

  Create a new user account and see if the problem persists.

  Step 2:

  If the problem does not persist in the new user account, it could indicate that your old user account is corrupted.

  Follow the steps in the following article to repair the damaged user profile:

  Difficulty of a corrupted user profile

  Method 2: Perform an auditor of file system (CFS) scan in safe mode

   

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  For instructions, see How to use the tool File Checker system to troubleshoot missing or corrupted system files on Windows Vista or Windows 7 .

• cannot rebuild the layout.ini file

  I deleted all the files in my prefetch folder and now can not rebuild the layout.ini file

  Make sure that registry prefetcher and superfetch settings are enabled.

  Now run this command (create a cmd file and execute it):

  %windir%\System32\rundll32.exe advapi32.dll, ProcessIdleTasks
  %windir%\System32\rundll32.exe advapi32.dll, ProcessIdleTasks
  %windir%\System32\rundll32.exe advapi32.dll, ProcessIdleTasks
  %windir%\System32\rundll32.exe advapi32.dll, ProcessIdleTasks
  %windir%\System32\rundll32.exe advapi32.dll, ProcessIdleTasks
  %windir%\System32\rundll32.exe advapi32.dll, ProcessIdleTasks
  %windir%\System32\rundll32.exe advapi32.dll, ProcessIdleTasks
  %windir%\System32\rundll32.exe advapi32.dll, ProcessIdleTasks
  %windir%\System32\rundll32.exe advapi32.dll, ProcessIdleTasks
  %windir%\System32\rundll32.exe advapi32.dll, ProcessIdleTasks

  Defrag % lecteur_systeme % b
  Defrag % lecteur_systeme % b
  Defrag % lecteur_systeme % b
  Defrag % lecteur_systeme % b

  This will create the files again.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/