receive a 0x4001100200000100a when using the factory DVD recovery

I tested both of the hard drives and memory, and they all spent it is a Pavilion DV9740 us laptop any help would be greatly appreciated

solved the problem, that the computer has 2 separate 160 GB hdd and primary one must have been fried because I opened the back and it was dinner warm to the touch, so I installed the secondary hard drive and it's working now

Thank you for all the information

Chris

Tags: Notebooks

Similar Questions

  • Blue screen when you use the CD/DVD on Satellite L30-105 player

    I have a Satellite L30-105. Recently when using the CD/DVD drive, it began to crash (blue screen) after playing a DVD-video or a music CD.
    Either way, I seem to only get playback of DVD-video and not the main sound track. Does anyone have an idea what may cause these errors.

    Hello

    To my knowledge, the blue screen starts if there is a serious software problem or if some of the equipment is malfunctioning.
    I put t believe that this blue screen error message can be caused by a defective CD/DVD drive.

    Hmm, according to your message and you can not hear the main sound and cannot read music CDs, I think that this problem could be linked to the sound card.

    In the first case I recommend updating the audio driver. If this does not help, try to recover the laptop with the supplied recovery CD and check if the same thing always happens on the new BONES recovered. (Don t install any 3rd party application).

    Good luck

  • Automatic stop when you use the CD/DVD on the 1900-803 Satellite player

    Ive had problems with my 1900-803 for the last 3 months. whenever I use the cd/dvd drive, my laptop turns off without warning after 15-20 minutes. It also stops if I try and play all the video files or scan my hard drive for viruses or spyware. is it because of overheating or any problem with drive

    Hello

    I don t think that the player is responsible for the unexpected shutdown.
    In my opinion it s an overheating problem.
    Well, there could be several reasons for overheating problems, but usually dirt and dust inside the laptop is mainly responsible for overheating problems.
    I recommend to check the cooling modules if they can work properly and then try to clean.
    I use the vacuum cleaner to clean the fans on my laptop. Check this possibility.

  • I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

    I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

    iPhones have a proximity sensor which is supposed to automatically turn off the screen when you hold it in your face. If this is not the case you can take the phone and have it checked.

  • I6 fire babysit device when using the internet? any solution?

    I6 fire babysit device when using the internet? any solution?

    Let's define "overheating". If the temperature of the phone reached a dangerous level the phone turns off it to cool down. This phenomenon occur? If this is not the case it is not overheated.

    What is your cell signal? If the signal is low, the phone must increase its power to maintain a connection. This may require as much as 10 times the energy as a strong signal, and the phone gets hot under these conditions. If will also drain the battery very quickly.

  • Satellite A200 - IE7 windows 'restore down' when using the Tracker pad

    Hi, I recently bought a Satellite A200 - 1VO and when using the laptop without a windows mouse explore 'restore down' at random.

    I found a thread on the site of the Internet USER who said that if his past not with a mouse, it may need tracker drivers up-to-date.
    You can also consider its under warranty.
    Any ideas anyone?

    Hello

    It s a bit confused what you´ve writes down. What do you mean exactly, where´s the problem and what you want to tell us when writing:

    > and when using the laptop without a windows mouse explore 'restore down' at random.
    >
    > I found a thread on the site of the Internet USER who said that if his past not with a mouse, it may need tracker drivers up-to-date.

    Whereas it should be, where´s now the problem?

    Please give clear and understandable feedback, then I and other users you could point to the solution.

    THX

  • Single line vertical when using the ADF to Scan or copy on HP Officejet Pro 8600

    Printer HP Officejet Pro 8600 Premium (CN577A)

    OS: MS 7 64-bit

    When you use the ADF for my printer HP CN577A Officejet Pro 8600 Premium, I get a single vertical line on the document which is produced. This occurs when copying or scanning, both black and white and in color. If I scan or copy using the glass, I do not get the vertical line.

    I already tried troubleshooting.  I unplugged the printer, left without electricity for several minutes; that didn't fix the problem.  Then, I cleaned the rollers and glass; I always get the vertical line, but only when using the ADF.

    My firmware version is up to date (CLP1CN1150CR).

    What should I check next?

    The only difference between the ADF and scanning flat, from a point of view of the scanner is there on the glass, it happens.  I suggest you get a bright flashlight and examine the corresponsing area hence is the line, it's almost certainly a spot on the strip of thin glass which is being just in the right place.

    I've seen some people suggest that put a flashlight almost parallel to the Strip, it shines from the bottom can highlight the area problem.

  • OfficeJet Pro 8600: Officejet Pro 8600 leaves black lines on docs scanned when using the document feeder

    This is the second HP Officejet Pro 8600 I had - one was replaced by HP, after that the same issue arose.  I tried to clean the entire unit, but we still get a thin black line running vertically down the page.  This line is divided into sections of 1 "and 2.5" in length.  Sometimes I get the fine line and then almost a shadow line that is parallel.

    Any suggestions would be very appreciated I have scan documents to PDF format and it's hassle to put everyone on the flat for scanning.  I use the charger of the doc on a daily basis and wonder if this could have something to do with the lines.

    Thanks for any help.

    The question is a spec on thin (~ 1 "wide) glass to the left of the main bed scanner.  Clean this area as described in this document.  It can be difficult to see the affected area, a bright flashlight which is held at an angle to the glass can help find the place.  Even a very small spec on the glass can cause a black line when using the ADF.

  • When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

    When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

    When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

    Hello

    With Docking Station, you can connect all the cables for printer, keyboard and mouse, adapter directly to the charging station.

    So whenever you use a laptop, you have just dock the laptop on the docking station and not need to re connect all cables again.

    This will help you when you move frequently with the laptop.

    Docking station will save your time, outside any other aspect, that it has to offer.

    Zaki.

  • Cannot receive or send mail using the Windows Mail get 0x800CCC18 error number

    How can I fix the problem?
    Cannot receive or send mail using the Windows Mail get 0x800CCC18 error number
    Windows mail was working fine until about 2: 30 EST 2011-12-14 and tried to send an email and got the above error msg.

    Check with your mail service provider to make sure that there is not an intermittent interruption of service.  If you have webmail capabilities, you can also check.  Otherwise, compact and repair the database (www.oehelp.com/WMUtil/) and if that doesn't help, remove your e-mail account, close and reopen WinMail and then add it back back.  Also check 3rd party program interference such as antivirus software (see www.oehelp.com/OETips.aspx#3).

    Steve

  • Error message indicating the r300 display driver stopped responding when using the full screen.

    Original title: driver atikmdag error message when using the full screen.

    Error message indicating the display driver r300 unresponsive, but has recovered, usually when enter full screen mode.

    Hi Peterrichardson,

    1. when exactly you get this message?

    2. what player do you use?

    3. you remember to make changes to the computer before this problem?

    Method 1:

    You can try to reduce the hardware acceleration and check.

    a. click the Start button, Control Panel.

    b. now, select appearance and personalization, and under display, select adjust screen resolution.

    c. now, select adjust the resolution.

    d. click Advanced settings.

    e. now, click the Troubleshooting tab, and select the change settings button.

    f. in the Security dialog box, click on continue.

    g. move the hardware acceleration slider to the third notch.

    h. click OK and restart Windows.

     

    Method 2: Update your display driver

    Updated a hardware driver that is not working properly

    Hope this information is useful.

  • OfficeJet pro 8600 print a single vertical black line when using the charger

    OfficeJet pro 8600 print a single vertical black line when using the charger

    Hi @realestatejeann,

    I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.

    Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

    Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.

    Vertical stripes, lines or streaks on Copies, faxes or scans.

    If you need help, let me know.

    Good day!
    Thank you.

  • disable the touchpad when using the mouse?

    How to disable the touchpad when using the mouse?

    Hello

    Please contact Microsoft Community.

    Most laptops have a function key (FN) which can be used in combination with other keys for example FN + F2 or FN + F7 to disable or enable the touchpad.

    You can also disable the touchpad in Device Manager.

    To disable the touchpad in Device Manager, follow these steps:

    1. Click Start.
    2. In the start search box type devmgmt.msc, and then on enter.
    3. In Device Manager, expand mice and other pointing devices and locate the touchpad.
    4. Right click on the touchpad and click on the disable option.

    Following the steps above should help you disable the touchpad.

  • Excel crashing, freezing when using the spreadsheet

    Original title: Excel 2013 file size.

    Hello. I'm having a problem with Excel crashing, freezing when using the spreadsheet. I work on a PC with WINDOWS 7 SP1 64-bit, through a server that is running Microsoft SERVER 2013, WINDOWS 7 PRO 64 BIT SP1. We use 5 PC via all current server running the same version of operating system that use the spreadsheet and in most is used only by 3 PCs anywhere, anytime, even if EXCEL is not on the server, it is running locally on the PC.

    My guy TI tell me the spreadsheet while working on too big to 2 k! They keep asking us to reduce the size and to separate the workbook to solve the problem. Personally I don't believe a Word, we do not use formulas etc just cells with digital text and the alphabet.

    Now last year on the advice of our computer SCIENCE company, we have been advised to upgrade our server and our PC because terminals that they were getting their limit of operation which I accepted. These have been updates middle of last year.

    On this basis, I believe that society COMPUTER trying to throw dust on my eyes as I do not think that they provided the wrong material and are unwilling to admit it.

    Counsel on the question worksheet would be great I need to come back with some kind of evidence in support of my way of thinking.

    I hope that makes sense, I know a little but not professional!

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • Hello! My question is, why so many photoshop is making selection when using the quick selection tool, before that it was unable to myself. Can someone tell me aolucion, please. Thank you!!

    Hello! My question is, why so many photoshop is making selection when using the quick selection tool, before that it was unable to myself. Can someone tell me aolucion, please. Thank you!!

    Hi Axe_Juan,

    Could you please let me know the version of Photoshop installed on your computer?

    Also you want to State as Photoshop not to do a quick selection?

    If so, then head over to the Photoshop preferences, then the performance tab and click on 'Big and flat', restart Photoshop and then use the selection tool.

    If something else, please let me know.

    Kind regards

    Tanuj

Maybe you are looking for