Received the error on the hard disk during the reading test targeted

Similar Questions

• FAT32 option not available to format the hard disk during Windows 7 installation

  I have a computer of Windows 10.  The owner wants to put on Windows 7.  I change the hard drive on the mbr to gpt.  But with the BIOS to TPG, I read that it, the bios would accept FAT32 hard drive.  I don't seem to have this option only NTFS.  Question: How to format a drive in FAT32.

  Hi John,.

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  Before you begin, note that the FAT32 file system has size limitations. You cannot create a FAT32 partition greater than 32 gigabytes (GB). In addition, you cannot store a file greater than 4 GB on a FAT32 partition. If the partition you want to format is larger than 32 GB, NTFS format may be a better option.

  However, I suggest you use the steps in this article and check if it helps.
  Reference:
  Format
  https://TechNet.Microsoft.com/en-us/library/cc730730.aspx?f=255&MSPPError=-2147217396

  Important notes:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  Additional information:
  Convert a hard disk or partition to FAT32 format
  http://Windows.Microsoft.com/en-us/Windows/convert-hard-disk-partition-FAT32-format#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Error - 10008 # replace hard disk 1

  I'm sure that my hard drive has become bad, other messages that I read.

  I don't have any data out of this device.  In fact, I was about to start deleting old data so I could give this device to a family in need.  Went to start the computer to start this process.  However, when I went to do this, he went to BSOD.  Messed with it a bit, then I got BSOD.  I have fillany calculate to run the test and got the 10008 # replace 1 hard disk error.

  As always, I want to give to this family that laptop, my question is: where I could buy a cheap replacement hard drive.  Is it difficult to do? And I don't think I have a back up / but on the operating system installation disk.  I have to do to get us to open and it would be affordable.

  I'm totally willing to put in the work to get to the top and go, but was woundering if anyone would be willing to give me some instructions on how to do it.

  Thank you 1 million for all advice and assistance.

  Hello

  Regarding the reinstallation of the operating system on the new drive HARD, here are two options.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option that you might consider is to create your own Windows 7 installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 Home Premium 64 bit SP1.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Best regards

  DP - K

• T1200XE error fall on hard disk 0 initialization

  Hello!

  I just bought an older T1200XE. When I start the laptop, it prints the message "error initializing hard disk 0" after the memory test, (a few seconds). I have to start with a floppy disk BACK.

  If I run FDISK, after awhile, it says 'Disc read error fixed', but if I run FDISK/status it shows me the disk of 20 MB. I downloaded FreeDOS and the FDISK, including in this OS says "controller error".

  I have an another T1200XE and this is exactly the same!
  I can't believe that two controllers or hd is dead!

  It may be possible that the free battery CMOS have erased the BIOS, but, how can I access the BIOS and configure the 20 MB HD? any idea? The setup1.exe program do not have a HD section...

  Help please!

  Thank you to.

  Hello

  Press F1 at startup to enter the Bios.

  http://FTP.Toshiba.ca/support/TechSupport/TSBs/all/-TSB000733.htm

• Receive VDS error message while accessing disk management.

  Original title: disk management VDS error message.

  I want to open disk management to see my disk partitions. I get an error VDS. And this has not happened before. It says to check my firewall settings. I don't need to connect remotely. I want to just run my HARD drive. Any thoughts?

  (Moved to programs)

  Thanks for your reply. I had some of my disabled services. I enabled all services, and sets the error message. I can now open disk management. Thank you.

• Error on startup: "Hard Disk 301" on HP laptops

  Hello.

  I had my HP laptop where not fixed LCD screen and got my Error Message at startup.

  _________________________________________________________________________________________

  Hard drive 301 error

  _________________________________________________________________________________________

  It is error to boot.

  Zelda.

  Also.

  Failure ID is 9BSDWF-77N852-MFPV6J-60DH03

  See you soon.

  You can also ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

• The virtual hard disk size

  For worker Analyzer IO VM, it is recommended to create a larger second virtual hard disk that serves as a target IOmeter.

  
  

  Is the size of the virtual hard drive exactly the same workload working set size, which means that all data in the virtual disk is read from or written to storage during the race?

  Do you have other recommendations to decide what size the second virtual hard disk should be a VM worker?

  Thank you

  Rebecca

  Hi RS_1, it's useful, but I was looking for some additional tips for the user guide.

  I received responses from some of the developers of IO parser and also ran a few tests of my own.

  Iometer generates its I/O based on the number of blocks of target disc (i.e. the manually added virtual hard disk on the worker VM).  The size of the disk hard virtual will be be equivalent to e/s working set size.

  For a virtual hard drive that strikes only cache, a rule would be its size to 100 MB.

  For a virtual hard drive that hits the disk, the virtual hard disk could be sized anywhere from 10 GB to the top. The drive, / o most actually hits disc rather than cache.

  To do this, I created a 200 GB thin provisioned virtual hard disk for my e/s VM Analyzer worker. As I ran the Iometer workload, I could see the thin disc quickly increase from almost nothing to its size fully provisioned. This means that the new virtual hard disk sectors were continually being read and written by Iometer. Interestingly, it only took about 5 minutes to flesh out a whole 200 GB drive. Obviously, this speed would depend on the type of I/O profile used.

  I also tested a 20 GB disk Iometer vs virtual a virtual drive of 200 GB. Average latency, IOPS / s and flow were all better for 20 GB disk - because a greater proportion of e/s in this case was hit the cache, tilt the numbers positively.

  So, even at the drive hard virtual, sizes last 10 GB, size of the VHD will affect yet observed performance to Iometer.

• SMART hard disk error message

  I have a Pavilion dv4-2045dx and I got the "SMART hard disk error" message since last night after my daughter felt my cell phone and I had a Crash report screen. Let him sit in the hope it to cool and start as expected. No luck...

  I already looked for several responses to the problem, but always returned empty-handed. I did the hard reset and I checked everything in the Diagnostices system only to control memory and battery by the way. I have not yet contacted HP about this. If I can fix it myself, I would rather to do.

  Anyone know of a way I can fix this WITHOUT having to buy a new hard drive?

  Thank you very much

  -GeneiRene

  Hello

  GeneiRene wrote:

  I got this error since last night after my daughter felt my laptop and I had a Crash report screen. Let him sit in the hope it to cool and start as expected. No luck...

  I already looked for several responses to the problem, but always returned empty-handed. I did the hard reset and I checked everything in the Diagnostices system only to control memory and battery by the way. I have not yet contacted HP about this. If I can fix it myself, I would rather to do. Anyone know of a way I can fix this WITHOUT having to buy a new hard drive?

  Thank you very much

  -GeneiRene

  Sorry to bring bad news, but... If you have a SMART hard disk error then the drive is toast. There is no way around that.

  The INTELLIGENT notification system gives you a report that the BIOS sees when it queries the hard disk during the Power On Self Test, he always does before the start in the Windows operating system.

  I hope that you have created a set of HP recovery cd. If you did, then you still have your operating system intact. If you do not, you can buy a replacement of HP recovery disk. They are inexpensive.

  Best regards

  ERICO

• faild - replace hard disk 1 (security id - error code 10008)

  When I open up my laptop so they gives error - faild - replace hard disk 1 (security id - error code 10008)

  can u tell me what I can do... but my hard drive works fine, but gives this error... you can tell me... .what I can drive u, can replace hard drive or not... and also my laptop warranty is expired... u can tell me one thing when I replace it my hard drive... .then they give me some conssesion or not... .and when my laptop gives error so can u tell me one more thing my hardisk recover or not... Please tell me...

  Hello

  You can run a test on your hard drive to make sure if its in a State of operation or do not use the link below

  http://support.HP.com/us-en/document/c00439024

  If the above test fails, you will need to replace the hard drive. You can buy the hard drive by going to the HP service center or any place where you want. To reinstall the operating system, you will need to buy the recovery disk set by calling HP techinical support.

• Smart Hard Disk 1 301 error

  on swicth on the laptop doesn't have an error occuerd that smart check... 301

  I'm tring to install win 8.1 but in "where do you want to install windows?" it an error message "windows cannot be installed in partition disk 0.

  Hello

  Smart disk error suggest falling/hard disk failure. You may need to replace it with a new one. If your computer is under warranty, HP will send free replacement.

  Contact HP: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  You will need new HARD drive to reinstall Windows successfully.

  Order of HP's USB recovery if you do not have a recovery media created with you & want to factory reset after replacement.
  http://support.HP.com/us-en/document/bph07143

  Concerning

  Visruth

• drive hard test shows 'hard disk 1 (303) quick"what do I do now?

  I have a HP pavilion DV6 notebook PC and I pressed f10 to run the hard drive and memory test. Test memory past but hard drives HDD 1 fast (303)? What should I do now?

  Hello

  303 error code is a disk failure short self-test and would indicate that hard is defective and must be replaced.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and your notebook dv6 series Nr - see here for an explanation.

  Kind regards

  DP - K

• Error: "there was a disk error when you write to the file C\:Program files (x 86) \microsoft games\dungeon siege\resources\objects.dsres" during the installation of Dungeon Siege.

  When I try to install it it comes up with an error about 16% in the installation, saying that there is a disk error when you write to the file C\:Program files (x 86) \microsoft games\dungeon siege\resources\objects.dsres

  Any ideas?

  Hi MouseToe,

  What version of Dungeon Siege you trying to install?

  The cause of this problem could be the corrupted resource (.dsres) file or disk error. Here are some things you can do to solve the problem.

  Method 1: Run the disk check.

   

  Check the integrity of your hard disk for lost clusters and errors.

  To do this, follow the steps in this article: check a drive for errors

  Method 2: Defragment the hard disk.

  This improves the performance of your hard drive.

  Reference: improve performance by defragmenting your hard drive

  Method 3: Run the game as administrator.

  Here's how:

  (a) right click on the game configuration file.

  (b) choose 'Run as administrator'.

  Method 4: Try to install the game in a different folder or to a different drive

   

  Try to install the game in a different folder. If the computer has another hard disk, try to install the game on the other hard drive.

  Follow these steps.

  a. Insert the game disc in the drive.

  Note: Do not click on Quick Installation during installation.

  b. follow the setting menus until you see the change button.

  c. click change.

  d. in the path box, delete the existing path, and then type the following text:

  drive: \Program Files\Microsoftgame name Games\

  In this example,drive is the letter of the hard disk drive and the name of the game is the name of the game you are trying to install.

  e. click OK when finished.

  f. follow the instructions that appear on the screen to install the game.

  This should be it.

  For more information, please visit:

  http://support.Microsoft.com/dungeonsiegeiifaq

  For additional assistance, please post your concerns at the forum below.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to add a printer, get the 0x000003e7 error code, event log indicates block defective hard disk.

  Original title: try to add a printer, get error code OxOOOOO3e7, event log indicates block defective hard disk.

  I have tried disk cleaner, no help

  Hi 2012mike,

  (1) what is the number of brand and model of your printer?

  (2) what has been the result of chkdsk?

  It is sufficient to indicate the complete error message you receive.

  Please provide the details of the event logs.

  Method 1: Run the fixit available in ink below

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us?EntryPoint=lightbox

  Method 2: Clean boot the computer and then try to install the printer

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you access the virtual machine, getting the error "encountered an error when you try to use one of its virtual hard disks". Help?

  I received the "low disk space error" on a hard drive of the virtual machine dynamic expanding. I have increased my space of virtual hard disk using "My Computer" > manage > storage > "Disk management" and choose "Attach VHD" then resizing to max available (64 GB), and now I can not start the virtual machine. It gives the error: encountered an error when you try to use one of its virtual hard disks. Help?

  Hi NatalieFoster,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 Virtual PC and XP Mode TechNet Forums

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.