Receiver game Microsoft Wireless issue
Right then my problem is the following:
I plugged the small receiver into a usb port wireless turns the light on it, and Windows detects it. I installed the drivers update software "update checker" as well as all, theres no problem and everything is fine and I can sync my controller to the receiver and play with him, and everything is fine.
Now.
When I turn my computer once, the custom of controller sync never back to the receiver, and there is nothing I can do about it but just uninstall and install again. By pressing the two buttons Sync does not work and I did not console Xbox 360 round interfere with the signal, internet even WiFi or wireless phones. My 360 controller is my device only wireless in the House.
I tried using a different usb port, my battery of controllers are full.
No there is no way to ensure that the receiver is able to reconnect with my controller once the link is broken once?
Either way, I run on XP SP2 and all drivers are up to date.
Hello
Check if the troubleshooting methods of the below article will help.
Troubleshoot the incidents of the response to the mouse or wireless keyboard
http://support.Microsoft.com/kb/838398
Tags: Windows
Similar Questions
-
Can I use any receiver for Microsoft Wireless mouse 3500
I have Microsoft 3500 Wireless mouse, couple weeks back I lost his nano-receiver, can anyone help figure out if I can use any other receiver for her or I have to buy new mouse collect them all?
If you have a receiver to predict the "Microsoft Wireless Mouse 3500" you might be able to connect again - not positive on this one (some Logitech devices can be "trained" to use other receivers).
In general though - if you lose the receiver, that the mouse is golden.
-
Microsoft Wireless Notebook 8000 transmitter/receiver
I lost the transmitter/receiver Microsoft Wireless Notebook 8000. How can I get the replacement of Microsoft transceiver, or what is the compatible transceiver for this mouse? Thank you
Hello
Thank you for visiting Microsoft Community.
According the description, you want a replacement of the transmitter/receiver for Microsoft Wireless Notebook 8000.
I suggest you to see the link:
How to replace Microsoft software or hardware, order service packs and replace product manuals
http://support.Microsoft.com/kb/326246
Please report if you need help.
-
Microsoft Wireless Desktop 800 USB keyboard and Mouse Combo transceiver
Dear Sir.
where I can get the new transmitter/receiver for Microsoft Wireless Desktop 800 as my transmitter/receiver is lost.
Hello
Try contacting Microsoft Support for a replacement.
http://www.Microsoft.com/hardware/en-us/p/wireless-desktop-800#support
Or check eBay. You can find cheaper overall.
-
Original title: MS Wireless Optical Mouse 2000.
Hi all
A Microsoft Wireless Optical Mouse 2000 work with a 1.0 Microsoft Wireless Optical Desktop receiver?
It will work with a 2.1 Microsoft Wireless Optical Desktop receiver. So maybe the operating frequencies are different?
Thank you
TerrySince then I've been able to solve my problem.
It seems that mouse, when you buy as a set of office, are "coded" somehow work with the receiver for this game. A little logic, I guess.
So thank you for the interest of all.
Terry
-
How to use Microsoft wireless receiver 700 v2.0 on the Mac book?
Hello
I have been using the Microsoft Wireless 700 receiver v2.0 on my laptop of Lenovo X 68 and docking station with WinXP for several years. I am in the process of upgrading to a Macbook Pro and would like to know how I can get this wireless keyboard/mouse to work on the Macbook.
Thank you
Kitenge
Hello
Make sure you have the right software for devices
http://www.Microsoft.com/hardware/en-us/downloads
If you are having problems using this troubleshooting
-
How can I replace my Microsoft Wireless Mobile Mouse USB receiver.
How can I replace my USB receiver. I just lost and I only want to buy a newer version for distributor of mouse Microsoft Wireless mobile mouse 4000.
Hello
Check with your local retailers and Microsoft Hardware Support.
Microsoft Hardware support
http://www.Microsoft.com/hardware/en-us/supportMicrosoft Hardware - contact us
http://www.Microsoft.com/hardware/en-us/support/contact-usI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Microsoft wireless desktop for v8.0 transmitter/receiver 2.4 ghz 800 drivers
Come on, microsoft Wireless 2.4 GHz TRANSCEIVER v8.0 800 office, running xp pro on pc and installation wizard application software to support all. Anyone got any idea what & where I can acquire. Thanks in advance. Ken
Hello
Welcome to the Microsoft Community and thanks for posting the question. According to the description, you are unable to complete the installation of the Microsoft Wireless Keyboard 800 desktop 2.4 ghz transceiver v 8.0.
I understand, it must be very difficult, when things do not work as expected. Please answer a few questions to refine the question.
1. you are trying to install the software CD/DVD or through Online?
2. What is the full error message?
3. are you able to install the other program successfully?
I suggest you to download the driver for the device in the article below and check with the question.
800 wireless keyboard
http://www.Microsoft.com/hardware/en-us/p/wireless-keyboard-800/2VJ-00001#support
Provide more information about the issue so that we can help you.
-
Microsoft wireless keyboard and mouse receiver 5000
I bought a combo keyboard and mouse 5000. The mouse never worked good to go, I bought a separate Microsoft Wireless Optical Mouse 5000.
The keyboard does not work with this receiver, I'll have to keep plugged in as well?
Hello
Maybe something is wrong with the rodent: another your keyboard may or may not
working with the same transmitter/receiver, may not even make use of the same technology.Microsoft Hardware Warranty Info.
http://www.Microsoft.com/hardware/warranties.mspxMS material supports and warranty claims - there is a support of 90 days starting from the
1 incident. (Most keyboard and mouse have 3 years warranty).1-800-936-5700
I hope this helps.
-
Can someone help me find the compatible receiver for my Microsoft Wireless Desktop Elite keyboard (not model no 1011)?
Hello
1 dint get you the receiver with the keyboard?
I suggest you to contact the person where you have purchased the keyboard for assistance.
It will be useful.
-
When are you going to fix the Microsoft Wireless Mouse overheating Nano receiver?
I bought one about a month ago Microsoft 4000 wireless mouse. Yesterday he is receiving died on me. I suspect the short-circuit. After some research, I realized that I was not alone with this problem, it could be a default of series.
Once the question has appeared on the forum before (http://social.answers.microsoft.com/Forums/en-US/w7hardware/thread/727a8f10-4aaf-4f1e-bea1-3a73f7e62cf9) but the problem was quickly rejected.
I bought the whole thing on a trip in Europe and cannot be replaced. So the question is: If we trust Microsoft for the second time and buy the same mouse again or opt for something else? I need a mouse that works on rough surfaces. But right now, I may need to overcome my taste for the device and opt for Logitech to anywhere, at least that you reassure me that you will have the transceiver replaced soon.
Microsoft Wireless Mobile Mouse 4000
Microsoft Replacement Tel: 800-933-4750. Product ID = D5D-00001. Have your mouse 4000 handy when you call. They will need the product ID (PID) from the bottom.
They will replace your for free . Replacements carry a warranty of 3 years. You must keep the PID of the original mouse for the replacement warranty.
-
As part of my work as a volunteer for a repairman to point not lucrative to registered of Microsoft, I test a selection of mouse and wireless keyboards that are given. Based on the production of a software tool for USB port monitor, I noticed recently that some models of the Microsoft Wireless Desktop Receiver generate constant even when the keyboard and mouse are slowed traffic USB (about 10 transactions per second) or are completely absent. This occurs with the 2.1 receiver Microsoft Wireless Optical Desktop (model 1028) and the Microsoft Wireless Desktop receiver 3.1 (also labeled model 1028). It does not occur with the Microsoft Wireless Optical Desktop Receiver 1. 0a, nor have I watched Microsoft controls only receivers or receivers of Logitech mouse...
This makes me curious. What do these receptors with all this chatter? I assume deliberately, because I see the same thing in all the units I checked. If I was pretty savvy to decode the trace of the USB, I might be able to figure it out by myself, but I'm not. I hope that there is someone on this forum who remembers how these old 27 Mhz receivers are designed and who can make me jump the learning curve by giving me an explanation of a layman to what happens here.
Hello
Thanks for posting your question on the Microsoft Forum. I understand that you are unable to connect to your hosted network.
I suggest you to ask your question in the TechNet forums.
TechNet is watched by other computing professionals who would be more likely to help you.
I hope this helps.
Thank you.
-
Microsoft wireless mouse 1000 and receiver Wireless USB keyboard 800 has been damaged
I had brought the combo of Microsoft Wireless Mouse 1000 and Microsoft Wireless Keyboard 800 a few months back, but accidentally my Receiver USB got damaged (physically) then, of course, he will not be replaced under warranty then please tell me how can I get new receiver for my mouse and keyboard. If it is not possible to get the receiver just tell me that if I buy the new keyboard 800 then receiver will work for my old mouse and keyboard or not. Any help to solve my problem will be highly appreciated.
Logical greeting,
I suggest you to contact the Microsoft Hardware support for assistance.
How to contact Microsoft if you have questions about your hardware device.
Before contacting the Microsoft Hardware support, you can check the link below.
How to replace Microsoft software or hardware, order service packs and replace product manuals
I hope this helps.
-
Lenovo M58 will not work with Microsoft Wireless Keyboard &; mouse game
I'm having problems the new buy Lenovo M58 with Microsoft Wireless Entertainment Desktop 7000 together.
He works after the software Intelli. But the problem reoccurs after a reboot start / cool.
Turn on the system until the logon windows, the keyboard screen isn't answer to everything.
You need to connect a USB keyboard and a mouse to connect, and then perform step below in order to get it back if you work.
(1) to reinstall Bluetooth transceiver and wait a few seconds
Or
2) press the Bluetooth detection on all devices:
-Mouse, keyboard & ARVAIn vain he will be again after a reboot or a cool start.
I found another similar claimed.
http://forums.MajorGeeks.com/showthread.php?t=195635
Hi all
Problem solved by updating to the latest version of the BIOS.
Thank you.
-
Microsoft Wireless Laser Mouse/Keyboard Version 2.0/3.0
Hello!
I was wondering if I can use my v2.0 USB Microsoft 2.4 GHz TRANSCEIVER that works for my keyboard Microsoft Wireless Laser V3.0 and my Microsoft Wireless Laser mouse V2.0 work for my other keyboard and mouse because I lost the transmitter/wireless receiver I had to for use. Anyway, the keyboard is called: Microsoft Wireless Laser Keyboard 6000 v2.0 and mouse is called: Microsoft Wireless Laser Mouse 6000 (there is no version on that). Also, if I can't use the USB with my keyboard and mouse, I was wondering if someone could fix my mouse? My mouse will not move. I move the mouse and my clicker or this thing won't pass. And then sometimes I can just click on it! Please help on these two problems. Thank you very much!!! (:Hello
For Microsoft hardware related issues, you can have a look at this link:
http://www.Microsoft.com/hardware/en-us/support/troubleshooting
Maybe you are looking for
-
I have recorded a track in Garage Band, shared to iTunes, but cannot sync with my iPhone. iTunes put it in a playlist called Garage Band. This playlist is not on my iPhone when plugged into my Mac. I tried to make a new playlist with the inside track
-
Allot of extra RAM for LabVIEW
Hi all I'm out of memory trying to compile a great personality FPGA VI. LabVIEW generates an error and crashes when it reached the limit of 4 GB memory while generating intermediate files (specifically step 3/5). I have 8 GB of RAM installed on the l
-
Recently (in the last 2 weeks) windows updates have been download but don't install. I tried to stop BITS, rename my catroot2 catroot2.old and restart with nothing will do. Continues to receive same error messages.
-
Error occurred during initialization of MAPI
I'm trying to move my messages OE 6 from one PC to another. When I click on file / export / Messages, I get the following message: "export could not be performed. An error occurred during initialization of MAPI. "How can I solve this problem or mov
-
Original title: * stop: 0X0000008E (0X9F266F91, 0X942F5F64, 0XC0000090, 0x00000000) I have xp professional sp3 on a laptop that I bought for the College and try to use Dragon Naturally Speaking v.10. I have the program loaded and am able to open it