Recently I could not put my Vanguard Prime Money Market in my MSN Money portfolio. Why?

Similar Questions

• RemoveAllEventHandler() could NOT put an end to events

  Hello

  I met a problem when I debug my C++ program for a data PCIe6361 acquisition card. Could you please help me?

  The application that we need is to acquire redeclenchables analog input signals for a specified number of cycles. According to your example available online program, I managed to achieve this goal: the components in good condition worked already pretty normal by reading all the data out in the outStream, which could then be saved.

  However, I found that the program is stuck to the 'RemoveAllEventHandlers()' function when I tried to stop the task. The function will not do its job, and the process continues to run forever. I myself remember that this function perfectly worked well when I tested it for a task simple start-triggerred. So, I thought that this is the sequence of my functions 'stop process' which give rise to this problem. I tried the variant of the sequence, but no improvement still. I wonder if it could be a systematic bug in the inner workings of the map, or I missed some important steps during the shutdown process.

  The essential parts of the program are displayed as below, please advise me what to do! Thank you very much!

  Wei

  Thank you very much for your answer!

  I tried some of the idea of our days, but still none of them seems to be the case. Fortunately, my colleague mentioned there are a few sections using 'measure studio' talk «InstallEventHandler» I realize that regarding the execution of RemoveEventHandler(), I actually includes the 'RemoveAllEventHandler()' and "-> stop() m_task" insdie the OnEvent(), which seems to violate the rules. I then clear upward and the return to normal program.

  Thanks a lot again!

  Wanchun

• Windows could not start. A recent hardware or software change might be the cause. (vista)

  I've updated pctools free and there was a mistake by because it came when the computer restarts,

  Windows could not start. A recent Ministry of hardware or software may be the cause. To solve the problem.

  1. Insert the windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "repair your computer".

  File: \windows\system\drivers\PCTCore.sys

  status: 0xc0000098

  Info: windows could not load a critical system driver is missing or corrupt.

  I tried I went to my computers startup options advanced and tried to run in safe mode, but the same previous screen came. Each option in my boot options is the same screen. I realize that to solve this problem, I might have to reload my OS together.  I tried to put what I believe to be the installation disc in and restart but it starts and says the same message. I don't know how to start from the DVD.

  Someone at - it solutions?

  Change the boot order in the BIOS to boot from the CD drive first.
  How to change the boot sequence in the BIOS
  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  C:\windows\system32\drivers\pctcore.sys file information
  http://www.file.NET/process/PCTCore.sys.html

• I've recently updated my Apple ID (including the change of password). However, could not connect to iTunes to update the applications or make purchases. Any help?

  I've recently updated my Apple ID (including the change of password). However, could not connect to the iTunes Store to update the applications or make purchases. Any help?

  Have you tried a forced reboot? Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.

  Then sign out of the iTunes Store and reconnect.

• Could not load file or Assembly runtime being more recent than currently loaded run time

  I've recently upgraded to TestStand 2010 and Visual Studio 2010 TestStand 4.2.1 and Visual Studio 2008. I now get the following error in the analysis of the sequence for all calls to my .net dll.

  "Step"My_StepType"not loadable module. Could not load file or Assembly or one of its dependencies. This Assembly is built by a runtime newer than the runtime currently loaded and cannot be loaded. »

  I don't know how LONG it is. All of this worked previously. I tried to go back to the dll, but that makes no difference.

  Any ideas?

  Thank you.

  I found where this topic is discussed in detail a bit more.  It is in the TestStand reference manual that is installed with TS.  TS 2010 it's on page 5-12 and the section labeled using .NET Framework under section adapter .NET of Chapter 5 (Module adapters).

• I recently took a class of Microsoft and received the "Welcome" e-mail, but could not connect with the supplied credentials.

  I recently took a class of Microsoft and received the "Welcome" e-mail, but could not connect with the supplied credentials (example below):

  Your MC ID: xxxxxxx

  Your temporary access code: 18995EBE-BDAF-4883-8F95-64D18D261848

  I created a new account with the e-mail MC ID has been sent and it was not recognized.  I would like to merge (link) the news and be able to get a fresh copy of my cert.  Thank you.

  Hello

  I suggest you contact Microsoft Learning support team to improve assistance:

  http://www.Microsoft.com/learning/en/us/help/assisted-support.aspx

• Message error "language could not be determined. How I put it to English in Windows XP

  My disc had to be rebuilt and now I get "Language could not be determined" at startup and when I try to restore my system Retore disc drivers.  Where I put the language option.  I looked at clock/calendar, but did not see an option for the language.

  Hello

  To open the regional and Language Options perform the following steps:

  a. Click Start.

  b. click Control Panel.

  c. click on Date, time, language and Regional Options.

  d. and then click regional and Language Options.

  See:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/int_pr_custom_workspace_regionalsettings.mspx?mfr=true

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/int_pr_mui.mspx?mfr=true

• Windows could not start. A recent hardware or software change might be the cause.

  I have a Toshiba M300 and it fails to start. Here's what he said.

  Windows could not start. A recent hardware or software change might be the cause.

  If the files in the window were damaged or configured incorectly, startup rapir can help diagnose and fix the problem. If the power was interrupted during startup, choose start windows normally.

  Lanch Startup Repair

  Start window normally

  Well, I had two options... and nothing works. It gets stuck just on loading thingy, where it says MICROSOFT WINDOWS and keeps loading... I leave for 2 days and he continued make it... and it also won't let me restore my computer...!

  PLEASE HELP :(

  Hi Suzanna2001,

  Were present from recent changes to the system before the show, such as adding new hardware or software (including Windows Update).  You have access to a Windows CD/DVD?  Run the startup from the CD/DVD repair.  There is also an option to perform a restore of the system on the CD/DVD.  If no option is the problem, follow the steps below:

  1 1 demarrer start from the Windows 7 DVD, select your language and keyboard options, select repair your computer, and then select command line.

  2. from the command prompt, run the following command:
  DISM image:c:------/ Get-Packages

  This will produce a list of updates installed and packets.  They will look like this:

  The package identity: Package_for_KB978262 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.0
  Status: installed
  Output type: security update
  Install time: 02-11-2010 13:01

  3. find the most recent and then make a note of the identity of the package.

  4 run:

  DISM image:c:------/ Remove-Package /PackageName:Package_for_KB978262~31bf3856ad364e35~x86~~6.1.1.0 (name of the update from the previous step)

  Until it is complete, you will get a status of the collection.

  5. restart your PC.

  You want to start with the most recent, and then remove them one at a time to find the problem update Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Widows could not start. A recent hardware or software change might be the case. Pre-installed vista so NO CD.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: widows could not start.  A recent hardware or software change might be the case.  Pre-installed vista so NO CD.  SAFE MODE AND ALL THE OPTIONS (LAST KNOWN CONFIGURATION, SAFE MODE WITH COMMAND PROMPT, ETC.) ALL DO NOT WORK.  Help, please

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You can't have a cd, but the PC manufacturer if they did not provide recovery disc, there is a hidden restore partition which should be accessed to make recovery disks.

  There the diagnostic utilities provided by the manufacturer of the PC that you can access from the start screen to test your hardware? Access your site from PC manufacturers for help on how to access these if avilable

• "Error 1402.Could not open key" during the installation of Adobe and HP update. Updates failed and earlier of the software cannot be put back in place because permission to modify the key is denied.

  • Issue: Failed to update and previous software may not be returned to or re-installed. Problem programs include Adobe Reader and scan and editor for my HP C4180 all-in-1 photo printer.
  • (For example) error messages:
    Error 1402.Could not open key:
    UNKNOWN\Components\1FA18F797...
    Check that you have sufficient access to that key, or contact your support...
  • No recent changes, with the exception of updates failed and normal widows.
  • I thought bad updates from HP and Adobe has caused the problem, so I uninstalled and tried to re - install the software several times, hoping a release update would solve the problem.  Impossible software returned to or re-installed, so I bought try 'PDF Converter 6' to to access PDF files. This program could not be installed for the same reason.

  The Windows 7 FAQ has reported that Windows 7 could be reinstalled everything keeping the settings. The same can be done with Vista? If not, is there a safe way to delete these keys, so the software can be installed/re-installed without having to make a facility 'clean '?

  Thank you.

  Hi misterDormie,

  This problem may occur if the permissions to a specific key in the Windows registry has been denied because the registry is corrupted or due to registry permissions

  I suggest you try the following steps:

  Step 1: Check with a different user profile

  If you do not have a different user account, you will need to create a (see link below).  If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  If the problem persists,

  Step 2: Run a scan online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

   

  You can follow the steps mentioned in the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows could not start. A recent hardware or software change might be the cause.__File:\Windows\System32\Drivers\shcsh.sys__Status:0xc0000225

  Whenever I try to boot my system I get the error message

  Windows could not start.  A recent hardware or software change might be the cause.
  File:\Windows\System32\Drivers\shcsh.sys
  Situation: 0xc0000225

  If I try to boot from the DVD of ROM(with Windows Visata) to reinstall the operating system to Windows Vista, it does not.

  Please I need your help

  Have you changed the boot order:

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  See you soon.

  Mick Murphy - Microsoft partner

• I recently upgraded to Photoshop cc (2015) and Windows 10.  Now I get error messages - "the extension of com.adobe.preview.loader could not be loaded because it was not properly signed.  And when I try to open a dng file, it comes up with "cannot be compl

  I recently upgraded to Photoshop cc (2015) and Windows 10.  Now I get error messages - "the extension of com.adobe.preview.loader could not be loaded because it was not properly signed.

  When I try to open a dng file, it comes up with "could not complete your request because it is not the right type of doc.  Now I have "expansion of libraries could not be loaded because it was not properly signed.

  Any help would be greatly appreciated.  The program worked perfectly in the past.

  I contacted Support Adobe this morning, and they were able to solve the problem.  It was difficult.

• I recently installed camera raw plugin (9_1_1_7) for sony camera rx 111. When I try to open photoshop CS4, I get the following message, "could not complete your request because photoshop does not recognize this file type" How can I have cs4 for r

  I recently installed camera raw plugin (9_1_1_7) for sony camera rx 111. When I try to open photoshop CS4, I get the following message, "could not complete your request because photoshop does not recognize this file type" How can get cs4 to read the raw file?

  Hi diggoman,

  Greetings.

  • Camera raw 9.1 is not compatible with 4 CS of PS.
  • This camera is too recent for your PS CS 4

  Your options if you want to open raw files-

  • Purchase PS CS 6
  • Or go to subscription with PS CC 2015, where you will also have access to the PS CS 6

  Concerning

  Rohit

• How can I put picture in photoshop?  Get the error message; Could not complete your request because Photoshop does not recognize this file type.

  How can I put a picture in photoshop?  I get an error message: could not complete your request because Photoshop does not recognize this file type.

  I'm just trying to bring a photo from the library of Photos on my Mac.  Help!

  Photoshop for beginners

  Somehow, I tried to answer you, I could solve this problem.  I tried to upload the picture and somehow, it came with the Photoshop window.  I clicked on "Editing" in the region, I needed to change, and this has been resolved.  Simple.  I just needed to do something very simple.   Thank you very much for your help!

• Recently, I buy a Sony camera a6000.  I am currently using 2.5 Lightroon.  When I tried to load my raw files from a card reader to Lightroom, but failed as Lightroom could not read images.  Can anyone help?  Thank you, Eric

  Recently, I buy a Sony camera a6000.  I am currently using 2.5 Lightroon.  When I tried to load my raw files from a card reader to Lightroom, but failed as Lightroom could not read images.  Can anyone help?  Thank you, Eric

  Upgrade, or -.

  Convert raw DNG images using the Adobe DNG Converter program free of charge your Sony raw images. Then import the DNG versions in Lightroom.

  "Adobe DNG Converter" is not part of Lightroom (or Photoshop), but a separate (standalone).

  You "run" program, select the folder of images from Sony, select a folder for the output DNG files.

  Using Photoshop | Digital Negative (DNG)