Receptive nav bar doesn't work does not correctly

Similar Questions

• [AS3] scroll bar doesn't work does not correctly :(

  I created a simulated Panel (buttons, switches and text to explain the functions of the button & switches). It works really well on most computers, but on some the scroll bar flashes "component" and does not work properly is this a bug or?
  
  2 users with the same excat version of working Flash player 9 correctly we do not. all the ideas I'm stuck :(
  Thanks in advance for your help.

  Thank you for your ideas is what I found when I reinstalled the flash even if it is the excat same version it worked. It seems that our system update for flash 9 did not work properly so I'll have to push a new update on all computers on the network (it's funny, it works ok on some and not others in my company, firefox is not an option

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• WIFI doesn't work does not correctly after driver update

  I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.

  Problems...

  1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

  2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

  If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

  If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

  For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

  Best regards
  ERICO

• Why is one of my 4 5893 Modules doesn't work does not correctly?

  Hello

  This is the configuration of my HW and SW:

  LabView 2013 SP1

  1 x cRIO 9076

  4 x NI 9853 CAN Modules

  CAN0 - 1000 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  CAN1 - 500 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  I worked on a program for a test system, where each Module 9853 control two devices (CAN0 and CAN1), the same type of systems is controlled by other 9853 3 Modules in parallel.

  So basically, I use exactly the same functions for each module. So far, everything has worked correctly on module 1, but now that I started to test all other modules I have the problem that Module 3/CAN0 does not correctly read the information.

  While watching the FPGA façade, I see that each 10000ms one value is read, but only on that ONE module (frames are sent every 1ms from my unit)

  I tested the HW itself using the included examples and it works correctly, the only difference is that the example used only 2 Modules, one to send data and the other to receive it.

  I included my FPGA program as an image, I really don't think there is a problem with my RT SW, because all the other modules are working properly. Basically, my SW FPGA bed CAN Modules and puts the information in a FIFO, if there is an error (no information), it will make a loop once more and check again.

  Thanks for your help

  I solved the problem, it was an error of configuration on my side.

  The entry for Module3 CAN1 time-out was set up NOT as 0ms and 10000ms as I thought! , so that was my reading for DUT3 loop run only every 10000ms.

• Update KB976902 now the mouse doesn't work does not correctly

  I had the KB976902 recently updated on 2 of the 3 computers and 2 who got now have a mouse that does not correctly.  The computer number 3 does not have the update and still works fine.  All three are almost identical hardware and software and have legitimate versions of windows 7.

  The problem of the mouse made play almost almost impossible. Left click crashes, lag mouse click one or two times when I I try to do a restore from the left eventually drag a shortcut of the thing, I clicked on and don't know how or why.

  I did a restore on a single computer, but it did not help.

  Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves. Since you are not sure, I'll have to have executed two removal on all of the computers in question tools.

  NB: If a step said to reboot, reboot!

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  5. open Internet Explorer 32-bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The mouse scroll wheel doesn't work does not correctly?

  Win 7, Microsoft Wireless Mouse 5000
  Everything worked fine but I had to reformat & return my computer again the conditions of the plant.  I have add the correct software for my mouse.  Now, when I use the scroll wheel, it moves the screen a full coming soon page (spreadsheet, word processing, etc.).  The unique thing is that I can say that she does so ONLY with products at Microsoft (Excel & Word so far), with any other software, it seems to work as it should (a few lines at a time).  No one knows what is the cause?  Help please.

  Thanks in advance... Bob

  Hello

  1. have you checked if the problem occurs with a different mouse?
  2. don't you make changes on the computer before the show?

  
  You can try the steps provide in the supplied knowledge base articles and check if that helps:
  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122
  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398
   

• BlackBerry smartphones HELP! Ball control and keys doesn't work does not correctly!

  I have the curve 8330 and when I put in my unlock code and press the trackball, it acts as if im entering additional keys. When I finally get into the phone and try to press on the trackball, in its action, as if I am pressing the asterisk key. It does not correctly read the keys and is to register them as another key! Help pleaaase!

  This looks like what I've seen several times on a device with moisture damage.

  Even sitting on a countertop bath during a hot steamy shower or bath can cause problems with keyboard and trackball up to this JUST-withered.

  Really, it is more common than you think.

  1 the battery immediately! Do not turn on your BlackBerry device.

  2. allow the device to dry in a warm, dry place for 3 to 5 days * (see below)

  3. DO NOT "check it every day" by placing the battery in. Leave what would to dry completely. It takes time. Replacing the battery to check it can damage only (humidity + power = disaster).

  3. If the unit is hot after the drying period, let it cool to room temperature before placing the battery in the.

  * Suggestions on your BlackBerry in a warm dry place (open, with battery):

  • Place the BB in a container of dry uncooked rice, and then you can also place it in one of the locations mentioned below.
  • On top of all heat dry emitting electronic components: TV or CRT, LCD, TV cable box / Satellite or plasma monitor
  • On the dashboard of your car on a day sunny

• address bar problem - doesn't work does not correctly!

  pressing enter does not work when entered a site address, you must manually, click the 'go '. also select address drop down bookmark updates only the address of the site in the address bar and you have to press 'go' to get the site to load. If I use the bookmark button in the toolbar, it opens the list and I can click on a bookmark and it will load as usual. Help, please!

  This problem may be caused by an extension of AVG (AVG Safe Search).

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Address bar doesn't work does not and is not AutoComplete. Places.SQLite file is not damaged.

  Since the last update, Firefox 49 and 50, the address bar has stopped working. First of all, it would not be before semi-automatic with my browsing history, and now he's not let me even in Web sites. I checked the places.sqlite file and it is not corrupt. I also tried to disable hardware acceleration, but it does nothing more. However, I started Firefox in safe mode and it works very well. What should be the problem here?

  Hi, because it works in Mode safe, pointing to an add-on or theme that is not compatible.

  Start Firefox normally, and then disable any topic and the modules one by one until you find the culprit - Manager of modules additional (Ctrl + Shift + A) > appearance/Extensions. You may need to restart Firefox after you disable some of them.

  More: Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you!

• NAV bar doesn't work DO NOT within a layer

  I created a vertical nav bar of 5 elements, inside a layer nested on a JPG homepage. I finished the bar of navigation with all the images, but when I test it by F12, I get a finger pointer, within the area of nav bar, but no action that is to say the color of the image remains unchanged, even if it appears in the composition of nav bar. Nothing else happens. Is there a solution to this, please?

  I created a vertical nav bar of 5 elements, inside a layer nested on a JPG homepage. I finished the bar of navigation with all the images, but when I test it by F12, I get a finger pointer, within the area of nav bar, but no action that is to say the color of the image remains unchanged, even if it appears in the composition of nav bar. Nothing else happens. Is there a solution to this, please?

• The home of the iphone 5 s screen button doesn't work does not correctly

  Home screen (middle button) does not work smoothly. Sometimes, it works very well and sometimes it doesn't. Someone might suggest it is a hardware or software problem that must do to solve this problem

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see the apple logo.

  Also updated software iOS 10.1 over your WiFi

  See you soon

  Brian

• Caps lock key doesn't work does not correctly. New computer.

  My shift key does not work correctly. Sometimes it works, sometimes it doesn't. I push on it is difficult to ensure that it works. But used in a standard keyboard, it is a problem because I don't bang the keys. I have to keep retype phrases due to errors that it creates.

  Its a shame because my computer is new. In fact, within a month, it is the second time I have to look at the service center. First time because the memory of my computer showed I consumed 40 GB without even having saved/downloaded a single file/document. The repair center did not have an answer and reformat the computer. This problem has been resolved.

  Was so much happier with my Dell computer. Nothing fancy, but no problem.

  I have the same problem. the button is enabled as soon as the second or even third. you don't want to, but you have to take it back in service. Maybe it's a factory default.

• Ctrl key doesn't work does not correctly

  Hello

  I have a HP Pavilion 17-e031sa laptop bought only 2 weeks ago running Windows 8.  The CTRL key does not work as it should.  In general, I would like to use it with the left button of the mouse to select non-consecutive items for the copy, but this won't work for this function.  It doesn't seem to be the key itself, because it does not work in the combination of keys ctrl/alt/delete.  I tried to uninstall the keyboard driver and restart, but without success.  Any help would be appreciated.

  Hi riggy69,

  Sorry for the confusion, I knew that these keys would not do the function you're looking for. I wanted to know if these shortcuts worked using the CTRL key. So we can see if it works this particular function or all keys ctrl shortcuts work. Quick access keys did what they were supposed to do? For example, the Ctrl + X cut the selected text, or Ctrl-Esc opens the start menu?

  Trying to see if there something wrong with the key itself or is someone wrong with this particular feature you try.

  Thank you

• DB between 11.2.0.2 and 11.2.0.3 DBs version link doesn't work does not correctly

  Remote schema in 11.2.0.3 DB
  
  
  In 11.2.0.2 DB, I created a link pointing to a diagram in a DB 11.2.0.3 DB
  

  -- Used the new 11.2 syntax (similar to easy connect )
  
  SQL > CREATE DATABASE LINK dropLater CONNECT TO SCOTT IDENTIFIED BY SCOTT_123 USING 'blpclst-scan.ap.haster.com:3587/SNPG_AP.ap.haster.com';
  
  Database link created.
  
  SQL > select count(*) from ind_names@dropLater;
  select count(*) from ind_names@dropLater
                       *
  ERROR at line 1:
  ORA-00942: table or view does not exist
  ORA-02063: preceding line from DROPLATER
  
  
  
  -- But the Sysdate from dual test is working fine
  
  SQL > select sysdate from dual@DROPLATER;
  
  SYSDATE
  --------------------
  21 Nov 2012 13:24:29

  IND_NAMES Table exists in the remote schema SCOTT. Anyone faced a similair with DB links problem?
  
  I think that this problem is due to the difference in version (11.2.0.2 to 11.2.0.3)

  Hello

  I don't think that the other version is giving the problem.

  It seems that the SCOTT user doesn't have access to this table in the remote database.
  It seems odd if you say that the IND_NAMES table doesn't exist in the remote schema SCOTT.

  Could you run the following statements and see the objects owned by the user SCOTT in remote db?

  SELECT * FROM user_objects@droplater;
  

  If the table exists in the remote schema SCOTT should appear in the output among other objects belonged schema SCOTT.

  Kind regards.
  Al

  Published by: Alberto Faenza on 21 November 2012 14:55