Recon Exchange rule - use sAMAccountName in 11.1.1.6.0

Similar Questions

• Deselect the rules using the Attachment Jena class

  Hello
  I use class Attachment Jena (oracle.spatial.rdf.client.jena.Attachment) make an inference to my data. I use the OWLPRIME and customized for my inference rules database. According to best practices with RDFS/OWL inference, I can remove individual rules of a rules using this SQL database:
  
  BEGIN
  SEM_APIS. () CREATE_ENTAILMENT
  "example_rdfsidx,"
  SEM_Models ('my_example'),
  SEM_Rulebases ('RDFS'),
  SEM_APIS. REACH_CLOSURE,
  "RDFS12 -");
  END;
  
  I would like to make my inference without rule OWLPRIME owl: disjointWith. Is there a way to do this, use the classes in Jena?
  Thank you
  Chuck

  Yes, you bet.

  In fact, it couldn't be more simple :)

  graphOracle.performInference ("DISJH");

  The API and the javadoc is
  /**
  * Creates an index/entailment rules based on the underlying model of RDF/OWL
  * and all other models attached and rulebases via {@link oracle.spatial.rdf.client.jena.Attachment} .
  *

  
  * Note that the transaction will be committed before any inference is performed.
  * Call {@link #rollbackTransaction()} If there is no change
  * should not be persistent.
  *

  
  *
  @param components specifies the parameter INF_COMPONENTS_IN
  * in the SEM_APIS. CREATE_ENTAILMENT PL/SQL interface.
  * It applies only to Oracle 11g and can be NULL. If not zero, it offers the possibility
  for the selective inference. See the document below for more details:
  * Oracle Database Technologies semantics Developer's Guide 11 g Release 1 (11.1)
  *
  * @throws SQLException when there is error on the server side.
  */
  public synchronized void performInference (String components)
  throws SQLException

  See you soon,.

  Zhe Wu (Alan Wu)

• Golden rule using the infinitely thin driver in EM simulation?

  Does anyone know when - is it safe to use around thin conductor during the EM in Axiem simulation?

  What the report of the dielectric thickness thickness of copper?

  For loss of conductor, thin and thick metal work substantially the same.  The place more obvious thickness there where is with coupling between metal on the same layer.  The sentence that you pay for the thickness of the metal is AXIEM must solve for most unknown, somewhere between 2 and 3 times the amount.

  At some point the coupling due to the thickness of the metal has a great effect on the hitch.   It is difficult to tell an exact rule when to make the change will question how far your floor plan is on the bottom and the thickness of the metal is.    What I suggest to you that do is setup a microstrip coupled simulation of line using the technology you use then sweep the distance between the lines for both a thin metal case and drop thick and see where converge the two responses.

  A few other points.

  1 check the option for the use of mesh edge when using thick metal.  For the most precise response and a good comparison, you want to make sure you edge the thick metal mesh.

  2. I have not seen the report of dielectric thickness to the question of the thickness of copper a lot, but you can run a similar experiment, just to see if it's important.   The biggest problem here is to ensure that you get the distance between your ground plan and track on the right.  If you use the limit of the structure to the ground, this usually isn't a problem.  But if you have aircraft grounded at other locations in your stackup, you will need to adjust dielectric thicknesses depending on whether you use thin or thick metal to ensure that the thickness of the dielectric is correct.

• block emails through exchange rules

  There, our CEO of the company receives as the CVS of unknown users. is it possible that I can block any email come with CV or resume in the subject or body Bock and put a replay to any shipment, my rules of exchange 2007? I know that this can be done from outlook, but it does not work when outlook is offline. so please advice if you have an idea. Thank you

  ASK THE QUESTION IN THE EXHANGE SERVER FORUMS:
  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer/

• Cannot add firewall rules using the REST API vShield App

  Hi all

  I get the following error

  "< errors > < error > < code > 100039 < / code > < description > Unmatched rules found in the configuration." "< / description > < / error > < / errors >.

  When you use the App API vSheild:

  POST https:// /API/2.0/app/firewall/dvportgroup-55/config < vsm-ip >

  Paylod XML:

  <? XML version = "1.0" encoding = "UTF-8" standalone = "yes"? >
  < VshieldAppConfiguration >
  < firewallConfiguration = "dvportgroup-55" the contextId >
  < layer3FirewallRule disabled = "false" priority = "none" id = "1021" >
  < action > allow < / action >
  < connected > false < / connected >
  < source >
  < address >
  < ipAddress > 172.30.68.212 < / ipAddress >
  < / address >
  < > 222 portInfo < / portInfo >
  < / source >
  < destination >
  < address >
  < ipAddress > 172.30.68.166 < / ipAddress >
  < / address >
  < application >
  < > 333 portInfo < / portInfo >
  < Protocol > 6 < / Protocol >
  < / application >
  < / destination >
  < / layer3FirewallRule >
  < / firewallConfiguration >
  < / VshieldAppConfiguration >

  Is anyone has seen this before or any idea why this might be happening?

  In addition, create a wall of fire to provide the variable "id"... How do I know which id to use to create a new firewall rule. I'm using id = "1021" I see one last created after quesrying API... but when you call it through automation, what will the process to define an id invalid?

  Thank you

  xar

  ID must be present, for the new rule Id must be '0' while that for others it should kept as what. The reason for this error which I believe is the same. Replacement of 1021 with 0 should solve this problem. http://blogs.VMware.com/security/2011/11/using-the-VShield-API.html should also be useful to start with vShield firewall App REST API.

  -Kone

• How do a rule using a rule already in the image?

  I have about 5,000 works of art photographed that I need to get the exact measurements, but I need to base the measures out of a leader who is in the photo next to the work, and the sovereign does not start at the edge of the work.

  The camera was moved from shot to shot, then the size of the compatible rule, nor is not the placement of the work.

  Is there an easy way for me to get the measurements of the rule on photography and apply it to the work?

  

  There is an obscure aspect of the ruler tool which I think can help with this. Open Image > analysis > measure of the value scale and choose Customize. Measure a unit on the physical rule and enter your unit in logical units.

  

  Then, in the tool rule Options, check the measurement scale used, and the sovereign will read the physical dimension. This scale is saved when you save the doc, and you can also save it as a preset.

• Writing rounded business rule using Calc Manager

  I'm new to Hyperion and I need to write a business rule by using the crib of calc. I need to write the rule that is recommended to round the vale accounts for almost value. Please suggest me how to use the function of business rule?
  Thank you

  You should be able to use the same functions in calc Manager.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Complex "validation rule" using Java Bean code

  Hello
  
  I've never used with jdeveloper validation rules, but I need a complex validation rule to a column of my table.
  
  Can I put a 'validation rule' on an attribute of an object of display or on a column in a table, using the Bean code?
  
  My column must contain different values depending on the other columns in the table, so I think I can't do this without java code...
  
  I tried to doubleClick on column to create a validator, but I put a 'printing' inside and saw that running many times, but I want to run validation only when the value of the column change!
  
  How can I do this? What should I use?
  
  Kind regards
  Trigger

  Trigger,

  If you want to validate an attribute that is dependent on another attribute - you must upgrade the VO (or EO), not at the level of the attribute. You can write a validator method (which is a Java method) to achieve this. I don't think that nini will work for postings that depend on several attributes.

  John

• rules using calculation Manager

  Hi experts,
  
  pls kindly explain these issues:
  1. which is the best way to create the rule? using calculation Manager or VBSCRIPT?
  2 list of members purpose?
  and
  3. different n/b calculate and calculate force?
  
  
  
  Thank you to
  850131

  Hi guy,
  1. which is the best way to create the rule? using calculation Manager or VBSCRIPT?
  Not so sure about this

  2 list of members purpose?
  Membership lists allow you to specify a segment of information within a dimension. You create lists of members in a VBScript file and load the file in your application. Once loaded, member lists are available for the users of the application. For example, you can select lists of members during the definition of the view in the data Explorer or in newspapers

  You can find more information in the HFM Administrator's guide

  See you soon!

  J

• How to configure a notification by e-mail for a rule (using Fogight 5.6.10)

  How to set up a notification by e-mail for a rule.

  The out come would be as follows:

  Send an email (to a group of e-mail) every Friday at a specific time.

  Hello

  Just to check, you want to set a rule that sends just a message/email to a group of send Fridays at a specific time?

  If so, first set you a schedule for the time, under administration > schedules > add a calendar

  Set the start time and end time or duration

  

  You can then define a calendar rule (you can set to allow no data and no application range if necessary).

  

  and this rule action to send e-mail to a list (or e-mail alias).

  I hope this helps.

  Golan

• latitude/longitude exchanged when using html5_init.js on os 5?

  Using html5_init.js in a web widget on the 5.0.0.680 project simulator, it seems, the latitude and longitude are be swapped.  I set up a reminder watchPosition but when the callback is called the latitude and longitude properties of the past position are reversed (ie: 43.67750/-80.73390 becomes - 80.73390/43.67750).

  I could very well be overlooking something really obvious here, but I don't see it and don't know what to do with it. Thoughts?

  My code is something like:

  var latitude = -1;
  var longitude = -1;
  var elevation = 0;
  
  function updatePositionError()
  {
  }
  
  function updatePosition(position)
  {
      latitude = position.coords.latitude;
      longitude = position.coords.longitude;
      document.getElementById("location").innerHTML = latitude + " " + longitude;
      return;
  }
  
  var geo = navigator.geolocation;
  geo.watchPosition(updatePosition, updatePositionError);
  

  VS2008 screenshot with one shows contact gears.

  

  I think you're right... you're looking for details of the code is declared as follows:

  var Coordinates = function(lat, lon, alt, acc, altAcc)
  

  I'll take someone to update as quickly as possible.

  You can correct the line of code in the html5_init.js file so that it looks like the following and it should solve the problem

  return new Coordinates(fromGearsCoords.latitude, fromGearsCoords.longitude,  fromGearsCoords.altitude, fromGearsCoords.accuracy, fromGearsCoords.altitudeAccuracy);
  

• Export Exchange 2007 Journal rules and import them into Exchange 2013

  Hello

  I need to export our Journal of exchange rules 2007 and then import them into exchange 2013, this 'http://technet.microsoft.com/en-gb/library/ee633488%28v=exchg.141%29.aspx' page said how it was possible, but I don't have the export-Jou... option in exchange 2007.

  Any help will be greatfull.

  Thank you

  William

  Post in the Forums of Exchange Server:
  http://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=exchangeserve

• Used in forms for rule of rounding decimal values

  I am trying to determine what district to separate the rule using forms of round numbers decimal, extracted from the database to display in a shorter length field. Specifically, when a number is equidistant from its neighbours (e.g. 0.5 is equidistant between 0 and 1), which rule is used to determine if she is rounded upwards or downwards (see this for a reference of the standard rounding rules)? The online help documentation addresses rounded, but does not specify what rounding rule is used (for example half away from zero, even half or 'Banker of the borough', etc.).

  I tried to figure this out by trial and error, but make me inconsistent results. Here's my test case...

  In the two test cases:

  Database field is NUMBER (20.4)

  Form field is numeric, length 30

  Form field format mask, programmatically, set is FM999G999G999G999G999G999G999G999G999G999G999G990D90PR (i.e., round to 2 decimal places)

  The form field displays the value of the field database directly

  Test 1:

  Database field value is 1.4445

  Result: The screen displays the value as 1.44

  Test 2:

  Database field value is 1,445

  Result: The field of the screen shows the value of 1.45

  It's completely inconsistent. If 'half away from zero' or 'half of the odd' district were used, then the value 1 of the trial must be displayed as 1.45 (because the last 5 will round the previous 4 to 5 and repeat). On the other hand, if 'half zero' or 'half similarly' district were used, the value of Test 2 should be displayed as 1.44.

  I understand that the values stored in the form are not rounded, and that this will not necessarily errors of calculation. However, it is necessary for purposes of documentation that I determine what the current rule used to display rounded values.

  I use forms GR 11, 2.

  I thought about it (by another user). My hypothesis rounded is not accurate: 1.4445 would like to round up to 1.44 mathematically, not 1.45 because 1.0045 is closer to 1 than 2. Therefore, Forms uses the standard rounded technology Oracle, which is:

  1. If n is 0, then ROUND returns always 0 regardless of the integer .
  2. If n is negative, then ROUND (n, all) returns - ROUND (-n, whole).
  3. If n is positive, then ROUND (n, integer) = FLOOR (n * POWER(10, integer) + 0.5) * POWER (10, - all over)

  Source: incompatible tie rounding rule used in Oracle Forms to the decimal values - Stack Overflow

• Obtaining the value zero when retrieving the firewall using vCD 5.1 SDK rules

  I am trying to extract firewall rules using vCD 5.1 SDK. Please refer to the below excerpt of code for more details:

  vcloudClient.login (username, password);

  ReferenceType adminOrgRef = vcloudClient.getVcloudAdmin () .getAdminOrgRefByName (orgName);

  AdminOrganization adminOrg = AdminOrganization.getAdminOrgByReference (vcloudClient, adminOrgRef);

  ReferenceType adminVdcRef = adminOrg.getAdminVdcRefByName (orgVdcName);

  AdminVdc adminVdc = AdminVdc.getAdminVdcByReference (vcloudClient, adminVdcRef);

  AdminOrgVdcNetwork admOrgVdcNw = null;
  {for (admOrgVdcNwRef ReferenceType: {adminVdc.getOrgVdcNetworkRefs () .getReferences ())}
  {if (admOrgVdcNwRef.GetName (.equalsIgnoreCase (orgNetworkName)))}
  admOrgVdcNw = AdminOrgVdcNetwork.getOrgVdcNetworkByReference (vcloudClient, admOrgVdcNwRef);
  }
  }

  If ((admOrgVdcNw.getResource () .getConfiguration ()! = null) & & (admOrgVdcNw.getResource () .getConfiguration () .getFeatures () ! = null)) {}
  for (JAXBElement <? extends NetworkServiceType > jaxbElement: admOrgVdcNw)
  {.getResource () .getConfiguration () .getFeatures () .getNetworkService ())}
  If (jaxbElement.getValue instanceof FirewallServiceType ()) {}
  final FirewallServiceType firewallService = jaxbElement.getValue ((FirewallServiceType));

  
  for (FirewallRuleType firewallRule: firewallService.getFirewallRule ()) {}
  System.out.println ("firewall Desc:" + firewallRule.getDescription ());
  }

  }
  }
  }

  Problem: admOrgVdcNw.getResource () .getConfiguration () .getFeatures () returns null. Please tell me where I'm going wrong with this.

  Is there another way to get the firewall rules?

  Hello

  The org vdc networks Firewall service information should be available to the edgegateway to support the network of org vdc.

  http://pubs.VMware.com/VCD-51/topic/com.VMware.vCloud.API.doc_51/GUID-1E7274A7-57D3-488F-9EFF-1D097FFE61A8.html

  Download bridge from edge of the helper class AdminOrgVdcNetwork info and then use the program EdgeGateway assistance for the information of firwall.

  Kind regards

  Rajesh Kamal.

• How to get AAU rules doc according to DocProfile using RIDC

  Hi experts,
  We owe to the fields of docrules of the Complutense University of Madrid. I can get the universal rules (rules that defined in the Complutense University of Madrid), but we have relationship between docprofile and rules which belonged to docprofile.
  As I said earlier, we can get docProfiles and docRules distributedly. (code excerpt below, please take a look) You could help me please on the rules of docProfile
  
  
  Best regards
  
  Public Shared Sub main (String [] args)
  {
  IdcClientManager Manager = new IdcClientManager();
  Customer IdcClient;
  Try
  {
  client = manager.createClient (urlConnection);
  IdcContext context = new IdcContext (username, password);
  DataBinder inputBinder = client.createBinder ();
  inputBinder.putLocal ("IdcService", "GET_DOCPROFILE");
  inputBinder.putLocal ("dpName", "BudgetProfile");
  inputBinder.putLocal ("IdcService", "GET_DOCRULE");
  inputBinder.putLocal ("dpRuleName", "budgetTriger");
  ServiceResponse response = client.sendRequest (context, inputBinder);
  DataBinder asBinder = response.getResponseAsBinder ();
  DataResultSet dataResultSet = asBinder.getResultSet("DocumentRules");
  The list of field < field > = dataResultSet.getFields ();
  for (field: fields)
  // {
  for (DataObject dataObject: dataResultSet.getRows ())
  // {
  System.out.println (Field.GetName () +":" + dataObject.get (field.getName ()) ");
  // }
  // }
  }
  catch (IdcClientException e)
  {
  e.printStackTrace ();
  }
  }

  If you call GET_DOCPROFILE, you will get DocumentRules ResultSet containing the names of the rules used in this profile. You can then call GET_DOCRULE for each of these rules.

  Jonathan
  http://jonathanhult.com