Reconfigure the connection Wireless on Satellite M160

Similar Questions

• I need to reconfigure the network wireless repeated now

  I need to reconfigure the network wireless repeated now.  Internet connection drops and I re - check the box 'use windows to configure wireless network. "  Why this keep happening?

  Provide more information, including the version and service pack of Windows, the brand and model of your computer and the make and model of your wireless adapter.

  In the meantime, however, your description sounds as if you have a utility provided by the manufacturer of your computer by the manufacturer of your wireless card which is competing with Windows for control of your adapter.  You must choose one or the other; You can't have both at the same time.  For a general introduction to the present, see http://www.ezlan.net/wzc.html

• How to restore the connection wireless internet?

  Impossible to establish a WiFi Internet connection.

  
  

  Laptop can only connect via LAN. Connection Wi - Fi deleted while surfing online. don't know how to restore the connection.

  
  

  
  

  Hi WeiShangSing,

  To set up a wireless connection on Windows 7 computer, I suggest you to refer to section of the online help and check if it helps.

  Setting up a wireless network

  http://Windows.Microsoft.com/en-CA/Windows/setting-wireless-network#1TC=Windows-7

  If you use a wireless router, you can also see this link for help:

  http://Windows.Microsoft.com/en-CA/Windows/set-up-wireless-router#set-up-wireless-router=Windows-7

  If you are having problems with the connection Wireless to the computer please answer back with error message. If you need help, I'll be happy to help you.

• If I have a macbook but parallel platform for vmware to run windows for mac, how to make the windows side to recognize the connection wireless from my mac

  If I have a macbook but parallel platform for vmware to run windows for mac, how to make the windows side to recognize the connection wireless from my mac

  Hello

  -You use Boot Camp as the Boot Manager? If so, make sure that all boot camp for Windows 7 drivers are installed.

  -You receive an error message?

  If you use Boot Camp, I suggest yo 1All operations from the below mentioned link and check if the problem persists.

  Boot Camp: Windows 7 Installation, frequently asked questions

  http://support.Apple.com/kb/HT3986

  For reference:

  Support for Boot Camp

  http://www.Apple.com/support/Bootcamp/

  Hope this information helps.

• Unable to connect wireless on Satellite L300D-13 s

  Bought this new laptop Satellite L300D-13 s
  The wireless doesn't seem to work, are the switch and the light and the device manager says theres nothing wrong with my hub driver seems to work very well with my laptop more old etc so I think as my hubs ok. Is it a commen problem?

  Its a BT home Hub so this is useful and if I use the cable between the hub and the laptop it works very well and connects to the top with a problem, please help

  Hello

  The laptop supports Realtek 802.11 wireless network card b/g, but it has not been equipped with BT module.
  So if you want to connect wireless you must first activate the WLan on your laptop computer (WLan switch on IT and FN + F8).
  Then it must be set up correctly using the right SSID, wireless encryption, Mac address, etc.
  Also make sure that your router supports standard WLan even as the WLan card.

  Welcome them

• Pavilion DV5-1015nr: How can I activate the connection Wireless on laptop DV5-1015nr?

  After upgrading my laptop DV-5-1015nr (x 64) from Vista to Win 7 wireless switch (just above the 'Insert' key) stays red, no matter how many times I press on this subject. In Device Manager, I see the Networl cards drivers I installed Win 7' work properly': Broadcom 4321AG 802.11a/b/g/draft-n Wi - Fi (sp45524) adapter and Realtek PCIe GBE Family Controller (Realtec v7.003.0213.2009).  HP does not offer a x 64 driver for the latter, so I got it from Realtek.

  Here are the steps I've tried so far:

  1 makes sure that Windows Explorer has been implemented.

  2 start-> Control Panel-> Network Sharing Center-> manage network wireless-> add-> manually create a profile network-> used the settings on my smart phone which is able to connect to the Internet:

  ~ Network name: 52GT6

  ~ Type of security: WPA2-Personal

  ~ Encryptiontype: AES

  ~ Security key: XXXXXXXXXXXXXXXX

  ~ Start this connection automatically: Yes

  ~ Connect even if the network is not broadcasting: No.

  3. click on 52GT6-connection > tab-> select as follows.

  ~ Automatically connect...: Yes

  ~ Connect to a more preferred...: No.

  ~ Connect even if the network is not broadcasting...: No.

  ~ Activate the WLAN connection setting: Yes

  4 OK.

  I click on 'Connect to a network' and receive a notification that "no connection is available. Running a diagnostic feature of "Troubleshooting" reports that the 'wireless capability is turned off." By pressing the switch wireless does not turn on the wireless feature.

  I went to this problem all day. Anyone able to help me?

  Hello:

  See if it works...

  First, install this driver update wlan...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_95652_2

  I would change the same connection if not broadcasting setting to yes.

• Re: Disabled the connection Wireless on Win 7 - Portege R600

  I installed Windows 7 (new installation) on Toshiba Portege R600 laptop and the built in 3 G modem does not work.
  When I run Toshiba Wireless Manager, he wrote "the Radio is off. To activate, activate Mobile switch. ».

  I'm sure that this switch is on, but pass connections wireless using Fn + F8 does not work then maybe it is off but I can't allow it. I have installed all updates of drivers such as: Wireless, Wlan driver manager.
  BT Stack, etc.

  Does anyone have an idea?

  Hello

  Wait a minute;
  You want to activate; Modem WiFi or 3G?
  Please note that WiFi is not 3G modem.

  Don't forget that you have chosen and activated the modem 3G and not the WLan.

  Welcome them

• Rename the name of the connection Wireless in Windows 8

  In Windows 7, it was possible to change the name of the wireless connection to something meaningful (what a concept). For example my home wireless with ssid xxxxxxxx be named home wireless. When I connected to the Office Wireless (with a ssid of yyyyyyyy) he would be named Office Wireless.

  This seems to be is no longer possible in Windows 8. Microsoft is way too much fun playing silly blighters. They have really taken to a whole new level with this OS.

  After much research I found how to rename a wired connection, but not wireless. For the life of me I can't figure out how to do this.

  I'm * NOT * request your opinion on whether I should do this. I ask * HOW * to do this. (Futile attempt to ward off the unnecessary and inevitable "you shouldn't do" or answers "I don't see why you would want to...) »)

  Maybe what you are looking for requires you to access the registry to make the name change.

  HKLM\Software\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles

  Browse the list of profiles to find the one that you need, and then change the value of string ProfileName.

  You can also do this when you change wireless cards and to reconnect to the same network and the connection then presents itself as 'name 2 Wireless' or ' wireless 3 "instead of just"wireless name' name, you can delete old profiles of the same name, and then rename the current without the number on the end. "

  After changes simply refresh your list of network connections to view the changes.

  As always, changes in the register are not advised, so with caution, take a backup before you change etc etc.

• I lose the connection Wireless for Windows XP Home Edition

  Hi, my first question here!  I have a laptop Toshiba Satellite with Windows XP Home Edition.  I have a Linksys wireless router.  Regularly, when the laptop hibernates or sleeps and turns the WiFi connection is lost.  Trying to 'fix' or 'connect' is usually unsuccessful.  Most of the time, after the reboot, it reconnects. Any suggestions?
  Thank you very much!
  Ken

  Assumed as replied, without other added messages

• How to disable the connection passes by Satellite C55D-B5308

  Hi all

  I need help for Toshiba Satellite C55D-B5301 with window 8 , how to turn off the sign - in password everytime I turn on my laptop. Doing research on the web, but so far find any results.

  The top of the tower for use domestic only.

  I thank once again.
  Thomas

  Hi Thomas

  You want to cancel the BIOS password? Or just Windows password that you need to connect?

• Wireless device detects the connection Wireless at home, but cannot connect to it

  It is a problem that I can not understand. I have a WRT54G Router. My phone can detect the WiFi but my phone can not conect to wireless network. I played a bit with all settiings on the http://192.168.1.1/wireless.htm Web page but can not understand. I think it's a software issue and not a hardware problem.

  Can someone please help? I have appreciapte any help. Thank you.

  Disable any wireless security, including the mac address filtering.

  Change the wireless channel to between 5 and 9.

  Change the width of the channel 20 mhz wireless.

  If this fails, then reset the default router may be required and reconfigure.

• I lose the connection Wireless Photosmart 7525

  After I print some documents on my Photosmart 7525 new and allow him to "go to sleep" I can no longer connect without power cycling of the printer.

  Windows 8

  No error messages other than "unable to communicate with the printer.

  I put the static IP address on the printer

  Cycle power and the printer prints everything that is in the queue

  Cannot ping printer until the power cycle

  I have 3 computers that connect to the printer, and they all have the same question.  the other 2 are machines to windows 7.

  Any help would be greatly appreciated.

  Reset the printer to its defaults following the manual.  Reset a static IP address in the printer out of the range of the DHCP of the router (check in the router).  Set to a channel like 1.6 or 11 fixed wireless, never 'auto '.  Cycle so much power and reconnect.  Try now.

• Unable to save the connection Wireless to a flash drive

  I'm saving my connections without wire of a machine so that I can import them on another. I use the wizrad to Windows 7 and I'm to the point where I hit next to export or copy the settings on an external drive. Once I have click on next to start the copy I get an error that says:

  Impossible to copy the settings to the USB flash Drive

  Windows cannot save your network settings on the flash drive.

  The flash drive is visible in Windows Explorer and I can copy files it it.

  -Russ

  Hi Russ,

  Thanks for posting your question in the community of Microsoft Windows.

  From the description of the problem, it seems that you can not save the settings of the wireless connection to a flash drive.

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

  I suggest save wireless settings using Netsh commands to export a profile wireless existing to a XML file, then import the wireless profile settings stored in the XML file on another computer.

  Follow the steps in the link below to import and export wireless profiles.

  Import and export wireless profiles:

  http://TechNet.Microsoft.com/en-us/library/dd283011 (v = ws.10) .aspx

  Note: This also applies to the Windows 7 operating system.

  If the problem persists, I suggest you to ask your question in the Technet forums to get help from the link below.

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope that the information above helps you.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• 5660 envy all-in-one: computer screen is disabled when you set up the connection Wireless new want 5660 on iPad.

  No error message or facilities.

  I started with setup assistant device and the iPad first wireless configuration. The installation program appears to proceed normally but then computer monitor went black. Cannot access the computer somehow. Finally, unplugged the computer, restarted and began again using the Setup Wizard first configuration wireless PC. PC installation is completed without incident and I have been able to operate printer iPad and computer. Still some features not fully understood, but maybe enlightenment will come. Thank you for your interest in my problem; Keep up the good work.

• How to share the connection Wireless on my computer Windows 7 Ultimate with my Windows Server 2003 computer?

  I have a computer that is running Windows Server 2003 on which I would like to connect to my ultimate Windows 7 running computer. I did everything it said in the videos and tutorials but I can't get the server to connect to the internet. I can connect via Office remotely, but it can not connect to the internet nor can any computer on my network server see only 7 PC Windows that the server is connected to. help, please!

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/SMS/threads

  Hope this information is useful.