Recovery CD error on Equium - lack of NTFS. SYS

Similar Questions

• NTFS.sys & isapnp.sys lack on Equium A60

  My Equium A60 has recently suffered from significant engine failure, insofar as it now does not trigger the same Windows startup. When it is turned on the message "system32/drivers/NTFS.sys" or system32/drivers/isapnp.sys are missing or damaged.

  A message tells me to use the Windows repair feature on my Windows installation cd, but since Windows was preinstalled I have no way to do this. I was wondering if someone could give advice beyond re-formatting the hard drive.

  M

  I'm sure that one of your friends has facilities Microsoft WXP CD. You can borrow and use the repair option.

• Equium A60 - missing or corrupt ntfs.sys, please run the installation program

  When starting my Equium A60 I get the answer "ntfs.sys missing or damaged please run.

  When I run the toshiba recovery still disc, it does not cure it and I tried to boot from xp cd and it says no bootable cd in the device.

  I remember that this issue has already been discussed in different threads here in the forum.
  Why you n t use the advanced search option?

  OK I did and found these two threads:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24051

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24292

  I would be grateful for feedback!

  Greetings

• Using the recovery disk to fix the mistake ntfs.sys

  Hello
  When I start my laptop, I get an error indicating that c:\windows\system32\drivers\ntfs.sys is corrupt. Is it possible to repair this using my toshiba recovery disk without reformatting all the laptop?

  If you want to use the R repair option, it is possible with the facilities Microsoft WXP CD.

  Also check this http://support.microsoft.com/kb/822800 document

• reformatted my mac pro. copied from iPhoto from the external backup drive. received the error message saying lack of theme fonts. removed the app to be able to reinstall. but my app store it shows as installed. How I install it again.

  reformatted my mac pro. copied from iPhoto from the external backup drive. received the error message saying lack of theme fonts. removed the app to be able to reinstall. but my app store it shows as installed. How I install it again. the deleted copy is missing in the trash folder too.

  Unplug your backup disk, restart, and try again.

• I can't open my Dungeon of docs word any error message "user lacks access privileges.

  I can't open my imported word docs Dungeon receive an error message 'user lacks access privileges' ideas of what she may be contacting Apple and they tried a lot of things and tell Microsoft that the docs are corrupt and nothing wrong with the word 2016.

  More info, please.

  When you say that it is "any word docs", do you mean another user on the same Mac, another Mac, an earlier version of Mac OS X, an earlier version of Word, another type of computer, from another type processor, or something else?

  These documents are currently stored in your Documents folder, into another directory user on an external drive, on a server, or elsewhere?

  You do it on El Capitan? What version of 10.11.x?

  Your copy of the word 2016 is perfectly up to date?

• My V715W was not printing black print cartridge replaced with cartridge Dell, error message says lack of empty, re-installed ink cartridge the cartridge with the same message. Put original cartridge is black and got the same error

  My V715W was not printing black print cartridge replaced with cartridge Dell, error message says lack of empty, re-installed ink cartridge the cartridge with the same message. Put original cartridge is black and got the same error

  My dells V515w printer will not print after that I changed the cartridge, the cartridges black & color dells. There is no print blank paper. Re-installed I'm really lost.

• ERROR: ORACLE prepare error: ORA-00936: lack of expression

  Hello
  
  I am required to run the 'pass-through' Oracle SQL, to extract data from tables in the SAS for processing and handling. My code (attached) reads and writes (runs) but with zero records to test first. I can't get beyond the error to prepare.
  
  The request is just like other queries that seem to work, but I can't get past this prepare error. I have no other access to individauls with an adequate knowledge of the PL SQL and as a last stop hoped others in the forum could quickly identify the source of the error.
  
  Thank you very much in advance for any help.
  
  Jeff
  _______________________________________
  
  1; *'; * « ; * / ; Quit; execution risk;
  2 OPTIONS NUMPAGE = MIN;
  3% LET _CLIENTTASKLABEL = % NRBQUOTE (rx_biplr_v3_2);
  4% LET _EGTASKLABEL = % NRBQUOTE (rx_biplr_v3_2);
  5% LET _CLIENTPROJECTNAME = %NRBQUOTE();
  6% LET _SASPROGRAMFILE =;
  7
  8 ODS CLOSE SUBJECT;
  NOTE: Some of your options or statements will not be managed with the Activex or Java Series devices. Chart by default for these
  drivers may be different from other SAS/GRAPH device drivers. For more information, please contact Technical Support.
  9 OPTIONS DEV = ACTIVEX;
  10 EGHTML TEMP FILE NAME;
  NOTE: Writing, body HTML (EGHTML) file: EGHTML
  11 ODS HTML(ID=EGHTML) FILE = EGHTML ENCODING = 'utf - 8' STYLE = EGDefault.
  11. STYLESHEET=(URL="file:///C:/program%20Files/SAS/shared%20Files/BIClientStyles/EGDefault.CSS")
  11. ATTRIBUTES = ("http://www2.sas.com/codebase/graph/v91/sasgraph.exe"="CODE") NOGTITLE NOGFOOTNOTE GPATH = & sasworklocation
  11.
  12
  gaccessible 13%;
  14 /********************************************************/
  15 * RX_BIPLR_V3. SAS;
  16 /********************************************************/
  17
  18 dm 'journal clearly out; delete ";
  19 linesize options = 120;
  20 option obs = 0 NoReplace;
  21
  22 ****************************************************************************************;
  23 * date reviewed programmer in WHICH WAS MADE;
  24 *----- -------------- ------------ -----------------------------------------;
  25 * 2005 creation of David Boyd program to the test population;
  26 *;
  27 * 06/02/2006 Ivon Jones changed to include the whole of the population;
  28 *;
  29 * 20/07/2006 Ivon Jones identified the holdout data elements;
  30 * or inclusion in the consolidation with;
  31 * Robin report;
  32 *;
  33 * 18/08/2006 Ivon Jones updated specific therapeutic Classes.
  34 * 10 - 2009 J Shaf - changed to extract actual or potential of UBH bipolar Dx and medical claims.
  35 ****************************************************************************************;
  36
  37
  38
  39 * % let allclmorgn = (', 'A'); / * claims origin code * /.
  40% would let begdate ='01 SEP 2009;
  41% let enddate = 30 SEP 2009 would be;
  42% let q = %str(%');
  43
  44
  45 data _null_;
  46. call symput ("fdos", put (intnx ('month' ' and begdate "d,-27," starts"), date9.));
  47 call symput ('ldos', put (intnx ('months', ' and enddate "d-0, 'end'" "), date9.));
  48, run;
  
  NOTE: DATA statement used (total duration of processes):
  time real 0.01 seconds
  2 the system SAS 11:44 Friday, October 30, 2009
  
  time CPU 0.01 seconds
  
  
  49
  50
  51
  52 **************************************************************;
  53 *? Data _null_ stage allows to create a macro variable to;
  54 * year and month, based on the macro ldos variable in the data;
  55 * step up? ;
  56 **************************************************************;
  57
  58
  59 data _null_;
  If 60 months ("& ldos" d) < 10
  61, then call symput ("yr_mo", compress (year ("& ldos" d) |)) '0' || months ("& ldos" d)));
  62 other call symput ("yr_mo", compress (year ("& ldos" d) | months ("& ldos" d)));
  63 to run;
  
  NOTE: The numeric values were converted to character values in the locations given by: (Line): (Column).
  61:39 61:64 62:39 62:57
  NOTE: DATA statement used (total duration of processes):
  time real 0.01 seconds
  time processor 0.01 seconds
  
  
  64
  65 * make % & biplr_dx;
  position 66% & begdate;
  ' 01 SEP 2009 would be
  67% put & enddate;
  30 SEP 2009 would be
  68% put & fdos;
  JUNE 1, 2007
  69% put & ldos;
  SEPTEMBER 30, 2009
  70% put & q;
  '
  71
  72
  73 libname biplr ' / home/jshafi01/projects/adhoc/biplr_dprsn/data ';
  NOTE: Libref BIPLR has been awarded with success as follows:
  Engine: V9
  Physical name: / home/jshafi01/projects/adhoc/biplr_dprsn/data
  74 rosdwp libname = oracle user "& oracle_user." pass = "& oracle_pass." ' buffsize = 32767 path = "rosdwp"; "
  NOTE: Libref ROSDWP has been awarded with success as follows:
  Engine: ORACLE
  Physical name: rosdwp
  75
  work.biplr_up_v1 76 data;
  mbr_id length 77 attrib = $ 26;
  78 the value biplr.biplr_ubh_med_v1;
  79 to be performed;
  
  NOTE: There were 0 read comments from the BIPLR data set. BIPLR_UBH_MED_V1.
  NOTE: All data WORK. BIPLR_UP_V1 has 0 comments and variables 1.
  NOTE: DATA statement used (total duration of processes):
  time real 0.01 seconds
  3 the system SAS 11:44 Friday, October 30, 2009
  
  time processor 0.01 seconds
  
  
  80
  81 proc content;
  82 to be performed;
  
  NOTE: PROCEDURE used CONTENT (total duration of processes):
  time real 0.03 seconds
  time CPU 0.03 seconds
  
  
  83
  84 proc datasets
  85 = rosdwp nolist library.
  86. delete biplr_up_v1;
  87 of quitting;
  
  NOTE: The removal of ROSDWP. BIPLR_UP_V1 (memtype = DATA).
  NOTE: PROCEDURE used DATASETS (time Total of processes):
  time real 3.74 seconds
  time CPU 0.03 seconds
  
  
  88
  89 proc datasets
  90 = work nolist library.
  copy 91 = rosdwp move;
  92 select biplr_up_v1;
  93 of quitting;
  
  NOTE: Move WORK. BIPLR_UP_V1 to ROSDWP. BIPLR_UP_V1 (memtype = DATA).
  NOTE: Variable labels SAS, formats and lengths are not written to the DBMS tables.
  NOTE: There were 0 read comments from the WORKING data set. BIPLR_UP_V1.
  NOTE: All the data ROSDWP. BIPLR_UP_V1 has 0 comments and variables 1.
  NOTE: PROCEDURE used DATASETS (time Total of processes):
  real 0.32 seconds
  time CPU 0.04 seconds
  
  
  94
  95
  96
  97 *****************************************************************************;
  98
  99 * execute (commit) by rosdwp
  100 ******************************************************************************;
  101
  102
  103 proc SQL noprint.
  104, connect to oracle as rosdwp (user = "" & oracle_user. "password =" "& oracle_pass ' buffsize = 32767 path ="rosdwp")
  104. preserve_comments);
  run 105 (alter session set nls_date_format = 'ddmonyyyy') by rosdwp;
  CREATE table biplr_rx like 106
  107 SELECT
  mrb_id 108,
  pcp_spc 109,
  rx_date 110,
  4 the system SAS 11:44 Friday, October 30, 2009
  
  Mark 111,
  generic, 112
  113 ahfs_cd
  ahfs_dsc 114,
  lbl 115,
  strngth 116,
  UNT 117,
  spc_tx_cls_cd 118,
  119 spc_tx_cls_dsc,
  GCN 120,
  rx_num 121,
  rx_ingrd 122,
  rx_paid 123,
  rx_cnt 124,
  rx_qty 125,
  rx_day 126
  127 rosdwp CONNECTION
  128 (SELECT
  129, middle of the year. UNIQ_MBR_ID as mrb_id,
  130 DB. PRVDR_SPCLTY_DESC as pcp_spc,
  FCP 131. LAST_SRVC_DT as rx_date,
  132 JJ. BRAND_NAME as mark,
  133 JJ. GNRC_NAME as generic,
  134 JJ. AHFS_THRPTC_CLS_CD as ahfs_cd,
  DD 135. AHFS_THRPTC_CLS_DESC as ahfs_dsc,
  136 JJ. LABEL_NAME as lbl,
  137 JJ. STRNGTH_NUM as strngth
  138 JJ. STRNGTH_UNIT_DESC as unt,
  139 JJ. SPECF_THRPTC_CLS_CD as spc_tx_cls_cd,
  140 DD. SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc,
  141 JJ. GCN_NUM as gcn,
  FCP 142. PRSCRPTN_NUM as rx_num,
  SUM of 143 (FCP. INGRDNT_AMT) as rx_ingrd,
  SUM of 144 (FCP. PD_AMT) as rx_paid,
  $ 145 (FCP. UNIT_SRVC_CNT) as rx_cnt,
  SUM of 146 (FCP. DSPNSD_QTY) as rx_qty,
  SUM of 147 (FCP. DAY_SUPLY_CNT) as rx_day
  148
  149 PHRMCY_CLM_FACT pcf,
  150 MBR_ID_DMNSN environment,
  151 DRUG_DMNSN dd,
  152 PRVDR_DMNSN pd,
  153 biplr_up_v1
  154. WHERE THE
  (155)
  156 (biplr_up_v1.mbr_id = MBR_ID_DMNSN. UNIQ_MBR_ID) and
  157 (PHRMCY_CLM_FACT. FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN. FINL_CLM_KEY) AND
  158 (PHRMCY_CLM_FACT. MBR_KEY = MBR_ID_DMNSN. MBR_KEY) and
  159 (PHRMCY_CLM_FACT. BNFT_KEY = MBR_BNFT_DMNSN. BNFT_KEY) and
  160 (PHRMCY_CLM_FACT. DRUG_KEY = DRUG_DMNSN. DRUG_KEY) and
  161 (PHRMCY_FINL_CLM_DMNSN. CLM_ORGN_CD IN (', 'A')) AND
  162 (PHRMCY_CLM_FACT. LAST_SRVC_DT BETWEEN q. & fdos. & q and & q. & ldos. & q)
  163)
  164 Group By
  165 mi. UNIQ_MBR_ID,
  166 pd. PRVDR_SPCLTY_DESC,
  FCP 167. LAST_SRVC_DT,
  168 JJ. BRAND_NAME,
  5 the system SAS 11:44 Friday, October 30, 2009
  
  169 JJ. GNRC_NAME,
  170 JJ. AHFS_THRPTC_CLS_CD,
  171 JJ. AHFS_THRPTC_CLS_DESC,
  172 JJ. LABEL_NAME,
  173 JJ. STRNGTH_NUM,
  174 JJ. STRNGTH_UNIT_DESC,
  175 JJ. SPECF_THRPTC_CLS_CD,
  176 JJ. SPECF_THRPTC_CLS_DESC,
  177 JJ. GCN_NUM,
  FCP 178. PRSCRPTN_NUM
  179);
  ERROR: ORACLE prepare error: ORA-00936: lack of expression. SQL statement: SELECT middle. UNIQ_MBR_ID as mrb_id,
  RDL PRVDR_SPCLTY_DESC like pcp_spc, FCP. LAST_SRVC_DT as rx_date, JJ. BRAND_NAME as brand, JJ. GNRC_NAME as generic,
  DD. AHFS_THRPTC_CLS_CD like ahfs_cd, JJ. AHFS_THRPTC_CLS_DESC as ahfs_dsc, JJ. LABEL_NAME as lbl, JJ. STRNGTH_NUM as
  strngth, JJ. STRNGTH_UNIT_DESC as unt, JJ. SPECF_THRPTC_CLS_CD as spc_tx_cls_cd, JJ. SPECF_THRPTC_CLS_DESC as
  spc_tx_cls_dsc, JJ. GCN_NUM as gcn, FCP. PRSCRPTN_NUM as rx_num, SUM (FCP. INGRDNT_AMT) as rx_ingrd, SUM (FCP. PD_AMT)
  as rx_paid, SUM (FCP. UNIT_SRVC_CNT) as rx_cnt, SUM (FCP. DSPNSD_QTY) as rx_qty, SUM (FCP. DAY_SUPLY_CNT) as rx_day
  OF PHRMCY_CLM_FACT pcf, MBR_ID_DMNSN mi, DRUG_DMNSN JJ, pd of the PRVDR_DMNSN, biplr_up_v1 () WHERE the
  (biplr_up_v1.mbr_id = MBR_ID_DMNSN. UNIQ_MBR_ID) and (PHRMCY_CLM_FACT. FINL_CLM_KEY =
  PHRMCY_FINL_CLM_DMNSN. FINL_CLM_KEY) AND (PHRMCY_CLM_FACT. MBR_KEY = MBR_ID_DMNSN. MBR_KEY) and
  (PHRMCY_CLM_FACT. BNFT_KEY = MBR_BNFT_DMNSN. BNFT_KEY) and (PHRMCY_CLM_FACT. DRUG_KEY = DRUG_DMNSN. DRUG_KEY) and
  (PHRMCY_FINL_CLM_DMNSN. CLM_ORGN_CD IN (', 'A')) AND (PHRMCY_CLM_FACT. LAST_SRVC_DT BETWEEN ' 01 JUN 2007"
  and 30 SEP 2009') Group By mi. UNIQ_MBR_ID, pd. PRVDR_SPCLTY_DESC, FCP. LAST_SRVC_DT, JJ. BRAND_NAME,
  DD GNRC_NAME, JJ. AHFS_THRPTC_CLS_CD, JJ. AHFS_THRPTC_CLS_DESC, JJ. LABEL_NAME, JJ. STRNGTH_NUM,
  DD STRNGTH_UNIT_DESC, JJ. SPECF_THRPTC_CLS_CD, JJ. SPECF_THRPTC_CLS_DESC, JJ. GCN_NUM, FCP. PRSCRPTN_NUM.
  NOTE: PROC SQL set NOEXEC option and will continue to check the syntax of the instructions.
  180 run (drop table biplr_up_v1) in rosdwp;
  NOTE: Statement is not executed because the NOEXEC option.
  181 disconnect of rosdwp;
  NOTE: Statement is not executed because the NOEXEC option.
  182 of quitting;
  NOTE: The SAS system is stopped at this stage of processing errors.
  NOTE: PROCEDURE used SQL (total duration of processes):
  time real 0.14 seconds
  time CPU 0.03 seconds
  
  183
  184

  (1) assuming that LAST_SRVC_DT is a column of PHRMCY_CLM_FACT, to precede the table alias "FCP" rather than the full table name. If a table alias is specified in the FROM clause, it should be used rather than the full table name when you reference the columns.
  2) there are two tables in the WHERE clause that do not appear in the FROM clause:

  PHRMCY_FINL_CLM_DMNSN
  MBR_BNFT_DMNSN

  user12142482 wrote:
  Hello again,

  Wish Oracle was a bit more informative. Uses an Institute of SAS product called Enterprise Guide. A "hot fix" has been installed to solve a problem that the product appears unable to save the latest version of the revised code changes (hence "BETWEEN between" remaining even after an earlier edition). In any case, with the change, now get this error:

  «ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT".» ' LAST_SRVC_DT': invalid identifier. (The log file is displayed below)

  -The-Les restes remains of the error, no matter if code "pass" is used to move the date range to Oracle (which seems correct to the log output below that I believe), or if I hard code the date range in the query SQL PL itself.

  -L' preparation error always appears at the end of the internal SELECTION.
  -L' error of preparation remain, with or without the GROUP BY clause.

  Is there something else I'm missing? Someone suggested a reserve word - but other versions of the ANSI SQL standard, I don't see that is the case. I went to Support SAS and SAS list serve to the University of Georgia, but nothing definite from these sources. Have requested either able to run Oracle directly, outside this SAS Institute product - process.

  Any suggestions are greatly appreciated. Thank you to all the world very much.

  Jeff
  150 OF
  151 PHRMCY_CLM_FACT pcf,

  
  152 MBR_ID_DMNSN environment,
  153 DRUG_DMNSN dd,
  154 PRVDR_DMNSN pd,
  155 BIPLR_UP_V1 BLPR2
  156. WHERE THE
  157 (BIPLR_UP_V1.mbr_id = MBR_ID_DMNSN. UNIQ_MBR_ID) and
  158 (PHRMCY_CLM_FACT. FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN. FINL_CLM_KEY) AND
  159 (PHRMCY_CLM_FACT. MBR_KEY = MBR_ID_DMNSN. MBR_KEY) and
  160 (PHRMCY_CLM_FACT. BNFT_KEY = MBR_BNFT_DMNSN. BNFT_KEY) and
  161 (PHRMCY_CLM_FACT. DRUG_KEY = DRUG_DMNSN. DRUG_KEY) and
  162 (PHRMCY_FINL_CLM_DMNSN. CLM_ORGN_CD IN (', 'A')) AND
  163 (PHRMCY_CLM_FACT. BETWEEN LAST_SRVC_DT & q. & fdos. & q and q & ldos. & q)
  (164);
  ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT." "' LAST_SRVC_DT ': invalid identifier. SQL statement:

• Windows didn't start because System32\Drivers\Ntfs.sys is missing

  Windows did not start because System32\Drivers\Ntfs.sys is missing or damaged.

  In fact, I tried the Installation Windows XP Home with the Recovery DVD - ROM product.

  After formatting it says: out of dvd, then press ctrl_alt_del

  Then appears the error with a missing or damaged file. (infact in German, because I install in German)

  Hello

  I studied a bit in the web and the question could be a malfunction of the memory module. I recommend checking out the RAM modules.

• Once I turned on the computer I got the following message: Windows could not start because the following file is missing or damaged. System32\Drivers\Ntfs.sys

  I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:

  Windows could not start because the following file is missing or damaged;

  System32\Drivers\Ntfs.sys

  You can try to repair this file by starting Windows Setup using the original Setup CD

  Select 'r' in the first screen to start repair.

  Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:

  1: C:\WINDOWS

  Which Windows installation you want to connect?

  (to cancel, press enter)

  What do I put here?

  You must first start on doing something so USB drive a bootable Hiren.

  Here's how:

  I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).

  It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.

  You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.

  You can easily copy your personal data (documents, pictures, music) to an external drive.

  A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
  http://www.hirensbootcd.org/download/    (look to the bottom of the page).

  Unzip the Hiren to a folder where you can find it.  There's a Hiren. BootCD.15.x.iso that you have to then.

  Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:

  Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):

  http://Rufus.AKEO.IE/

  I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter!  This part makes me still a little nervous, so be careful.

  Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open.  Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).

  Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files.   Hiren ISO is also a good size.

  When RUFUS is finished, it will say "DONE" at the bottom.

  Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me).  If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.

  When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office.  You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!

  Remember: you do not start on your hard drive, - you started in the Office of the Hiren.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.  You may need to run more than once.

• XP home missing or corrupted ntfs.sys file and a model will not start.

  Hello

  Tried to repair from the recovery console. Tried to change ntfs.sys ntfs.old nem so I could copy a file on HD used (s) ren ntfs.sys ntfs.old according to the support.microsoft.com/kb/555531. Would not change the name. The major part of my question is when I looked in the appropriate directory, it is not made to see the size of the file - has-+. (,) *-* before ntfs.sys instead of 45681 ntfs.sys.  What does that mean?  I try to improve myself by using the command prompt.

  Thank you, Doug

  Hi Reddoug,

  1. What is the full error you received when you rename the file?
  2. Did you the latest changes on the computer?
  3. What type of CD Windows XP Setup do you use?
  4. The computer is able to boot in safe mode?
  5. Have where you looked for the file on the computer?

  I suggest you try all the steps mentioned in the 555531 article and check if it helps.

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

• KERNEL_DATA_INPAGE_ERROR Stop: 0x0000007a (0xc043be28 0xc0000056 0x039b0860 0x877c5eaf) Ntfs.sys - Address:Ntfs.sys + cdeaf ntkrnlpa.exe + d8569 ntkrnlpa.exe + 1f834 ntkrnlpa.exe + 2a89d ntkrnlpa.exe + aae05

  I'm having this BSOD error for the last 6 months. I updated my drivers, run chkdsk and recovery system and the error is not always intentionally. Please help me to solve my problem. I realized that my ntfs.sys file does not work for windows vista.

  In addition, it can help to look at the files minidump against accidents with a debugger.

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• Satellite A60-160: OS loses some records - isapnp.sys, Ntfs.sys

  Hello, my name is Daniela.
  I'm an Italian girl and I speak very well English.
  I have a Toshiba Satellite A-60-160.
  Operating system is corrupt because he has lost some files: system32/drivers/isapnp.sys - system32/drivers/Ntfs.sys

  I used the dvd - rom toshiba Recovery Console but the problem is here!

  Help me, please!

  Hi Daniela

  For me, it looks like a classic symptom of out crapping of RAM.
  I think you should begin to discover what could RAM has a malfunction.
  If you use two memory modules, so please try to remove a single module and check if it will only work with a module inside.

  Of course, the best way is to use the new modules. You may test it in the point of the store service or repair computer.

• missing or corrupted ntfs.sys file

  I get a message that my ntfs.sys file is missing or damaged.  It tells me to insert the original installation cd, however, I don't have the original installation cd.  What can I do to restore this file and my computer?

  Hello

  ·         How Windows XP has been installed on the computer?

  Unfortunately, you would need a disk to fix the problem. See the following article on the problem you are experiencing.

  NTFS.sys missing or corrupt error message

• BSOD Vista caused by Ntkrnlpa.exe Ntfs.Sys, random hal.dll, etc..

  A friend of mine gave me this computer about 2 or 3 months without a hard drive, thanks to a little research because I am not a professional of any kind, I knew that, because of the lack of a disk hard computer did not have an operating system. Having had an old computer just sitting with a 60 GB hard drive I connected on the computer I have now. After buying a new installation of Windows Vista Service Pack 2 disc, just well installed on the hard drive (which has been formatted to remove the old operating system, and all other things potentially buggy) and the computer has given new life. Following these time immediately, I downloaded and installed Microsoft security Essentials to protect my computer and a few other things to Rainmeter, steam, and that's it. Not even which in fact through the first day, however it has begun its random cycle without blue screening end who, after looking hard and troubleshooting, I've yet to find a solution for. Especially, it occurs whenever trying to read a chart highlighting / demanding the game, but also random triggers when nothing works and it's just sitting here. Ironically, I am writing this issue on the same computer in the hope I can find a fix to the Microsoft community.

  He still run Windows Vista Service Pack 2 (32-bit) and my computer is a PC of Compaq Presario SR5710Y so that you know what the material consists of.

  Here's my last 4 crashes

  Mini042815 - 04.dmp 28/04/2015-18:59:23 0x864e3aa8 0x8471ad78 0x000000e3 RESOURCE_NOT_OWNED 0x00000000 0 x 00000002 Ntfs.sys Ntfs.sys + 12012 NT File System Driver

  Mini042815 - 03.dmp 28/04/2015-18:23:07 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 0 x 00000004 0x00000002 0 x 00000000 0x822d9abf ntkrnlpa.exe ntkrnlpa.exe + 4de7d NT Kernel & System

  Mini042815 - 02.dmp 28/04/2015-18:14:28 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 0x006301be 0x00000002 0 x 00000001 0x822dab50 ntkrnlpa.exe ntkrnlpa.exe + 4de7d NT Kernel & System

  Mini042815 - 01.dmp 0x0000001a MEMORY_MANAGEMENT 15/04/2015-18:12:40 x 0 00005003 0xc0802000 00000197 0 x 0 x 77635101 hal.dll hal.dll + 770c Hardware Abstraction Layer DLL

  DJ

  If he continued to hang after re-installing windows, but before installing other programs, there is probably material.  I'd start with memtest

  2-Memtest. (You can learn more about running memtest here)