Recovery error in the definition of theme 'Halo '...

Similar Questions

• Flex Builder detects more errors against the definition of the Array class.

  Hello

  I don't know if this is the right forum to post this problem, but here goes.

  I've been developing an application using Flex Builder 3. Today, I met a strange problem. When I use a table variable in an Actionscript class, the compiler detects more errors against the class definition. I have only encountur this behavior with the Array class. Other classes of higher level, seem to work. F.i. I can insert the following text in a function:

  var a: Array = [1, 2, 3];

  var i: a.Len;

  After construction, I get no error. When I run the application, the variable I is set to 0.

  I tried to clean up the existing project. I created a new project in flex from scratch. The problem remains.

  I did not have any updates lately, f.i. flash player, java,... the development environment has not changed as far as I know.

  Can someone give some advice about this problem? Thank you.

  Kind regards

  Wim.

  The table is a dynamic class, as an object, which means that it is perfeclty happy to return values for properties that have never put. These values will be "undefined", which, when converted to an integer, turn into 0. This is the kind of unfortunate behavior, but there is no way to get around.

• Recovery error on the L955D-100 Satellite 00003

  Hello
  I tried the recovery procedure, but when it comes to 31% it gives error recovery 3.

  (1) what can I do?
  (2) if I change the hd will be the recovery procedure still works fine?

  Thank you

  Post edited by: mevangelista

  A question: did you create recovery media and try to install the recovery DVD or USB recovery image?

  In my opinion you shouldn't change anything. I assume that your laptop is guaranteed valid so I think you should contact Toshiba service provider and ask for help. If there is a problem with the HARD drive, you should get a new one for free.

• Error on the definition of the stored procedure in the simultaneous program

  Hello
  
  I created a stored procedure and wanted it attached to the concurrent program. The purpose of this stored procedure when you run it in simultaneous program, the system retrieves the data from the csv file downloaded from the server, then it will insert in the tables of SO / the Interface API. Below, the error occurred.
  
  
  * Starts * 18 April 2012 18:18:42
  Error ORACLE 6550 in FDPSTP
  
  Cause: FDPSTP failed due to the ORA-06550: line 1, column 7:
  PLS-00306: wrong number or types of arguments in the call to 'SPKO1 '.
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored
  
  Steps I did to set the stored proc
  < < simultaneous executable program > >
  
  Executable: RDRAGON_SO_IMPORT
  Short name: RDRAGON_SO_IMPORT
  Application: Order management
  Method of execution: PL/SQL, stored procedure
  Run file name: SPKO1
  
  < < concurrent program - set > >
  
  Program: RDRAGON SO IMPORT
  Short name: RDRAGON_SO_IMPORT
  Application: Order management
  Name of executable: RDRAGON_SO_IMPORT
  Method: PL/SQL, stored procedure
  
  Format: text
  No set
  
  -Here are my stored procedure-
  
  
  CREATE OR REPLACE PROCEDURE APPS. SPKO1 IS
  FH UTL_FILE. TYPE_DE_FICHIER;
  v_line VARCHAR2 (32767).
  v_source_id NUMBER (10);
  v_created_by NUMBER (10);
  v_creation_date DATE;
  
  v_org_id NUMBER (10);
  v_orig_sys_docref VARCHAR2 (50);
  V_Customer VARCHAR2 (360);
  v_customer_prev VARCHAR2 (360);
  v_sold_to_org NUMBER (10);
  
  v_orig_line_ref NUMBER (10);
  v_item_code VARCHAR2 (2000);
  v_ordered_qty NUMBER (10);
  v_selling_price NUMBER (10);
  v_count NUMBER (10);
  v_stat NUMBER;
  
  
  /******************************************************************************
  NAME: SPKO
  PURPOSE:
  
  REVISIONS:
  Worm Date Description of the author
  --------- ---------- --------------- ------------------------------------
  1.0 16/04/2012 administrator 1. Created this procedure.
  
  NOTES:
  
  Keywords to replace automatically available Auto:
  Object name: SPKO
  SYSDATE: 16/04/2012
  Date and time: 16/04/2012, 17:55:42 and 16/04/2012 17:55:42
  Username: admin (set in Options of TOAD, editor of the procedure)
  Name of the table: (defined in the dialog box "New PL/SQL object")
  
  ******************************************************************************/
  BEGIN
  v_source_id: = 6;
  v_created_by: = - 1;
  v_org_id: = 204;
  v_customer_prev: = null;
  v_orig_line_ref: = 0;
  v_stat: = 0;
  
  SELECT header_id in (DE) v_orig_sys_docref
  Select header_id
  of OE_ORDER_HEADERS_ALL
  creation_date desc order
  ) WHERE ROWNUM = 1;
  
  
  FH: = UTL_FILE. FOPEN ('XXANDDIR2', 'myfile1.csv', 'R', 32767);
  < < file_read_lines > >
  LOOP
  BEGIN
  UTL_FILE. GET_LINE (fh, v_line);
  
  V_Customer: = LTRIM (RTRIM (REGEXP_SUBSTR (v_line, "[^,] +' 1, 1") ',' "') ','" ');
  v_creation_date: = LTRIM (RTRIM (REGEXP_SUBSTR (v_line, "[^,] +' 1, 2") ',' "') ','" ');
  v_item_code: = LTRIM (RTRIM (REGEXP_SUBSTR (v_line, "[^,] +' 1, 3") ',' "') ','" ');
  v_ordered_qty: = LTRIM (RTRIM (REGEXP_SUBSTR (v_line, "[^,] +' 1, 4") ',' "') ','" ');
  v_selling_price: = LTRIM (RTRIM (REGEXP_SUBSTR (v_line, "[^,] +' 1, 5") ',' "') ','" ');
  v_orig_line_ref: = (v_orig_line_ref + 1);
  
  If v_stat = 0 then
  v_orig_sys_docref: = (v_orig_sys_docref + 1);
  end if;
  
  SELECT hca.cust_account_id from v_sold_to_org
  OF hz_cust_accounts AOB.
  HP hz_parties
  WHERE hca.party_id = hp.party_id
  AND hca.request_id is null
  AND hp.party_name = v_customer;
  
  If v_stat = 0 then
  INSERT INTO OE_HEADERS_IFACE_ALL)
  order_source_id,
  orig_sys_document_ref,
  org_id,
  CREATION_DATE,
  created_by,
  last_update_date,
  last_updated_by,
  operation_code,
  sold_to_org_id,
  booked_flag)
  VALUES)
  v_source_id,
  ('TEST' | v_orig_sys_docref).
  v_org_id,
  v_creation_date,
  v_created_by,
  v_creation_date,
  v_created_by,
  "INSERT."
  v_sold_to_org,
  'Y') ;
  commit;
  end if;
  
  INSERT INTO OE_LINES_IFACE_ALL)
  order_source_id,
  orig_sys_document_ref,
  orig_sys_line_ref,
  inventory_item,
  org_id,
  ordered_quantity,
  unit_selling_price,
  unit_list_price,
  CREATION_DATE,
  created_by,
  last_update_date,
  last_updated_by,
  operation_code)
  VALUES)
  v_source_id,
  ('TEST' | v_orig_sys_docref).
  v_orig_line_ref,
  v_item_code,
  v_org_id,
  v_ordered_qty,
  v_selling_price,
  v_selling_price,
  v_creation_date,
  v_created_by,
  v_creation_date,
  v_created_by,
  "INSERT");
  commit;
  
  v_customer_prev: = v_customer;
  If v_customer_prev = v_customer then
  v_stat: = 1;
  on the other
  v_stat: = 0;
  end if;
  -DBMS_OUTPUT. Put_line ('Col1: ' | v_source_id |', Col2: ' | v_creation_date |', Col3: ' | v_created_by |', Col4: ' | v_updated_date |', Col5: ' | v_updated_by);
  EXCEPTION
  WHEN NO_DATA_FOUND THEN
  OUTPUT file_read_lines;
  END;
  END LOOP;
  SELECT count (*) in the OE_HEADERS_IFACE_ALL v_count;
  DBMS_OUTPUT. Put_line (' record Total inserted successfully: ' | v_count);
  UTL_FILE. FCLOSE (FH);
  
  END SPKO1;
  /
  
  
  But when I run the stored procedure using TOAD his work.
  
  Help, please. This is my first time to attach the stored procedure in the concurrent program.
  
  Thank you very much.
  
  Kind regards
  Diane
  
  Published by: peopsquik08 on April 18, 2012 03:58

  as clive_t solier
  >
  You must explicitly reference the settings out
  >

  Try

  DECLARE
  VFILE VARCHAR2(32767);
  V_SOURCE_ID NUMBER;
  --
  ERRBUF VARCHAR2(200);
  RETCODE NUMBER;
  
  BEGIN
  VFILE := 'myfile1.csv';
  V_SOURCE_ID := 6;
  
  --APPS.OMORDERLOADER.SPKO1 ( VFILE, V_SOURCE_ID );
  --COMMIT;
  
  APPS.OMORDERLOADER.SPKO1(
      ERRBUF => ERRBUF,
      RETCODE => RETCODE,
      VFILE => VFILE,
      V_SOURCE_ID => V_SOURCE_ID
    );
  END;
  

  but the code above to test your proc

  to run concurrent SQL, you can use fnd_submit.submit_program

• reformatted my mac pro. copied from iPhoto from the external backup drive. received the error message saying lack of theme fonts. removed the app to be able to reinstall. but my app store it shows as installed. How I install it again.

  reformatted my mac pro. copied from iPhoto from the external backup drive. received the error message saying lack of theme fonts. removed the app to be able to reinstall. but my app store it shows as installed. How I install it again. the deleted copy is missing in the trash folder too.

  Unplug your backup disk, restart, and try again.

• We live errors in the creation of recovery media. Please try again

  Hello

  I bought the windows 8 hp pavilion series laptop and tried to create the recovery with blank disc DVD - R disc.

  While burning data first drive the HP Recovery Manager application up the pop-up message like "we live errors in the creation of recovery media. Please try again' with the OK key.

  Press the button Ok app closed automatically once.

  Model laptap

  HP Pavilion n003tx-15 Notebook PC (Windows 8)

  Please someone help me.

  Thanks in advance

  Concerning

  Trehout

  Have you tried to burn in Mode safe?

  http://support.HP.com/us-en/document/c03481733

• Deleting the definition of Type casuses control a lot of misreferences and program in the block diagram errors

  In LabVIEW 2010, I have a Def Type control i.e. a Cluster with several other controls within the Cluster. Apparently, the references to the controls in the block diagram are based on the order that the controls have been added to the Type definition command. The side effect of this is that if a control is removed from the command of Type definition, many of the done Variable reference in the block diagram or now either broken, or worse still, refer to wrong control in the Type definition. These problems are quite difficult to find and fix.

  Comment: If you create a control of Type definition and make a Cluster. Now add any controls to the Cluster in an order, let's say A, B, C, D. Their types does not matter. Now use the Type definition in one or more controls on the front panel. In the block mark references to controls inside the Type Def would control on FP. Now return to the Type definition and remove the command B of the definition of Type. Now, lots of errors appear. Broken links. But worse still, you see old references to B that now refer to C and old references to C are now referring to the old references to D and D are removed altogether, etc..  This side effect is much more errors, broken links and misreferences than expected otherwise.

  How add and remove controls anywhere in a Cluster in a Type definition, at will, without creating a whole bunch of errors in program, broken links and misreferences for controls in the Type definition that have not changed?

  
  

• Dv7-6b57NR system recovery error ' The Recovery attempt failed.

  I hope someone can help me with the following problem.  I bought a DV7-6B57NR of a sale by auction online (not Ebay) and they said that they removed the BONE using a program called 'Blanco', because it is a returning customer and they wanted to clean up before data of re - sale.  I ordered recovery disks from HP by product and serial number in order to restore the operating system.

  SN - [removed for privacy]

  PN - A1785UAR #ABA

  I received three recovery DVDs.  2 DVD system recovery and recovery of Driver and Application 1 dvd.

  I tried to restore factory reset.  The process took 30/40 minutes and installed all three discs.  Then the laptop has rebooted and started to load windows, windows 7 logo came and went through more than a few steps.

  Finally it came to a window (Recovery Manager) with the following msg

  "The recovery attempt failed.  Select one of the following buttons"

  There are three buttons

  Save log |  Details |  Retry

  The following is details.  Something attracted my attention is, see below in red (my version of Win 7 should be Home Premium 64-bit).  HP sent me DVDs bad?  Any help will be greatly appreciated.

  --------------------------------------------------
  [11:46:24.29] enter audit OS Edition...
  ----------------------------------------
  [11:46:24.31] check RStone.ini file to determine the required edition.
  [11:46:24.36] out of checking OS Edition...
  --------------------------------------------------

  --------------------------------------------------
  [11:46:24.37] controls if the upgrade to Windows 7 is required.
  ----------------------------------------
  [11:46:24.39] current edition is [HomeBasic]...
  [11:46:24.39] [start] necessary. Don't need to upgrade...
  [11:46:24.40] [Starter] needed...
  [11:46:29.08] necessary [Starter] edition. But is not the case of the [Starter] OS...
  [11:46:29.08] OS edition upgrade might have a problem...

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7601.17514

  The current edition is:

  Current edition: HomeBasic
  The operation completed successfully.

  Component: TDC Preinstall diagnosis Tools for Windows 7 - TDC
  --------------------------------------------------------------
  Error: no OS flag not set on the device, please use EEPROM to set ~ OS SKU ~ value = 2
  [11:47:20.87] ------------------------------------------------------------------------------------------
  ...
  CTO error condition has been undergoing dtected [update Factory]! ***
  [11:47:20.87] Suggest create PIN-journal and send to TWN PDC NB-PreinPM for further analysis...
  ...
  [11:47:20.87] ------------------------------------------------------------------------------------------

  [11:45:23.44] Start BBOffline.cmd...
  UPDrv = [C:]
  [11:45:23.45] value UIA 951 error Code
  [11:45:23.77] WinPE is 32-bit.
  [11:45:23.78] start [corrections].
  [11:45:23.80] ---------------------------------------------------------------------
  [11:45:23.80] FixUps.cmd...
  [11:45:23.81] create overall progress information...
  [11:45:25.42] complete FixUps.cmd...
  [11:45:25.42] ---------------------------------------------------------------------
  [11:45:25.42] start [Tweaks for SDRD].
  [11:45:25.42] ---------------------------------------------------------------------
  [11:45:25.42] SDRD Tweaks to change the regional settings default user...
  [11:45:25.43] copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES. DLL.
  [11:45:25.54] Run "Dism.exe image:C:-/ Set-SKUIntlDefaults: en - U.S.-image: C:
  [11:45:33.16] ---------------------------------------------------------------------
  [11:45:33.16] start PININST.exe for offline...
  Housing starts [11:45:47.17] [Sleep 10 sec].
  Starting price [11:45:57.23] [creation RStoneFUpdate.INI].
  [11:46:09.94] start [create 1 GB Pagefile for offline].

  Volume in drive C has no label.
  Volume serial number is 945 B-A81C

  Directory of C:\system.sav\bbv

  05/10/2012 11:46 1 073 741 824 pagefile.sys
  1 file (s) 1 073 741 824 bytes
  0 44,736,749,568 dir bytes free
  [11:46:10.02] the mark detection.

  [11:46:10.28] ---------------------------------------------------------------------
  [11:47:01.27] Start SysID Check...
  [11:47:01.98] Start Option control code...
  SKU_DEF_COUNTRY = [244]
  SKU_DEF_SYS_LOC = [en]
  ------------------------------
  Reset the country in administrator...
  ------------------------------
  ------------------------------
  Reset the default user countries...
  ------------------------------
  ------------------------------
  System reset located
  ------------------------------

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7601.17514

  Statement of the international settings offline.

  By default system UI language: en-US
  Settings system locale: en-US
  Default time zone: Pacific standard time
  The settings for the default user regional: en-US
  Location: United States (GEOID = 244)
  Active keyboard (s): 0409:00000409
  Keyboard layered driver: PC / AT Enhanced Keyboard (101/102-Key)

  Installed the language (s): en-US
  Type: Fully localized language.

  The operation completed successfully.
  ------------------------------
  Updating the system locale info...
  ------------------------------
  [11:47:15.98] Start PIN Tweaks...
  [11:47:16.01] ---------------------------------------------------------------------
  [11:47:16.01] PIN Tweaks to hide all for BurnBoot PBO and BBV2 on restored image...
  [11:47:16.01] ----------------------------------------
  [11:47:16.01] Tweaks to Unattend.xml of OOBE
  [11:47:16.01] to pick up the right file...
  [11:47:16.01] ----------------------------------------
  [11:47:16.01] rename unattend.org to unattend.or_
  [11:47:16.04] ----------------------------------------
  [11:47:16.04] without light sensor...
  [11:47:16.05] ----------------------------------------
  [11:47:16.07] it is restored by SDRD [SSRD.flg] image...
  [11:47:16.07] ---------------------------------------------------------------------
  [11:47:16.10] Start MIR Tweaks...
  [11:47:16.15] ---------------------------------------------------------------------
  [11:47:16.15] [MIR Tweaks]...
  [11:47:16.15] ---------------------------------------------------------------------
  [11:47:16.18] starting factory updates...
  [11:47:18.02] installation start QFE offline...
  [11:47:20.69] PININST_OFF: PAST...

  [11:47:20.73] Type C:\System.sav\Logs\BBFindEr.log...

  [11:47:20.75] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\PININST_OFF. JOURNAL
  Result = PAST

  [11:47:20.78] Type C:\System.sav\Logs\BBFindEr.log...

  [11:47:20.78] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\BBFIND4QFE. JOURNAL
  [11:47:20.80] FUList.log to check if there are double Desc...
  No duplication.
  [11:47:20.86] duplicated No. Desc is located... PAST.
  [11:47:20.87] there was no update from the factory...

  You are the very welcome.

  You will only be able to install programs available on the page of the driver and support for your laptop.

  Use the Windows backup tool to create a system image and save it on a portable hard drive.

  Use the dvd or flash drive bootable do you reinstall windows from the recovery image by selecting the repair option you will find on the installation screen.

• Microsoft Security Essentials unable to update the definitions of spyware, error code 0 x 8000-4004

  Microsoft Security Essentials is unable to update the definitions of spyware, my computer is essentially unprotected right now.

  * original title - error code 0 x 8000-4004 (says that there is internet connectivity or network issue/no prlblem with my internet or connectivity *)

  Hello

  Try the steps listed in the links below and check, if this can help: install the latest Microsoft Security Essentials definition updates: http://www.microsoft.com/security/portal/Definitions/HowToMSE.aspx

  How to manually download the latest Microsoft Security Essentials definition updates: http://support.microsoft.com/kb/971606

  For more assistance, you can post your request in the Sub forum: http://answers.microsoft.com/enus/protect/forum

• STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

  My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

  Error during the extraction process. Details of error: path not found

  I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

  You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

  If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

  You also will not start in any kind of Mode safe no more.

  Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.].

  Failed to start the RPC mode server safe either.

  I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Error chkerrBB.cmd detects an error during the PININST_BBV. chkerrBB.cmd check c:\system.sav\logs\BurnBootWarn.log, unable to perform the system recovery

  Original title: Vista system recovery failure

  I have a HP dv4-1275mx laptop and I just replaced the hard drive.  I got the Vista hp HP system recovery disks but recovery has failed 3 times.  The hard drive is new and has more space than the old.  It is a Western Digital 640 GB scorpio blue sata 5400 RPM.

  Error message:
  chkerrBB.cmd [17:18:51.36] detect an error in the PININST_BBV.
  [17:18:51.37] chkerrBB.cmd check c:\system.sav\logs\BurnBootWarn.log

  Hello

  I would say to contact contact HP support to:

  HP customer service

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

• Netflix in Media Center returns a 'there was a problem of data recovery. "Check the works of your internet connection and try again" error instead of loading Netflix data.

  context: a previous thread with an identical title never responded, the problem just disappeared.  Well its been two weeks since then and the problem came back.

  somethings which may or may not apply: internet TV seems to work better in media center.  All updates have been applied to H.P. of Vista SP2. Netflix works fine in ie8 (such as the internet, of course). Tried to delete all the Internet Options, delete browsing history section of Internet Explorer. I get the same error message with my windows 7 professional media center, but netflix seems to play anyway (no game with vista). I recently installed quicktime alternative 2.72 to see what it was and how it worked, then removed and put back in quicktime.

  Tried / symptoms:

  -Remove all the browsing history (econcepts)
  -Same message on Win7pro but works even when (econcepts)
  -Works on Win7 no problem (omegafiler)
  -Works in ie 8 (econcepts)
  -Works in crome (Martin TX)
  -Consensus is that it started around December 30, 2009 (GeoffG1, johnetX, me)
  -Remove and reinstall silverlight (omegafiler)
  -Remove and replace netflix plugin (omegafiler)<- how="" did="" you="" do="" that="">
  -Netflix says: microsoft problem (Nitestalker)
  -Microsoft is silent (this thread - on vacation?)
  -Same problem on 32-bit and 64-bit VMC (JRSMiamiFL)
  -No applied update (johnetx)<- perhaps="" date="" related="" or="" drm="" date="">
  -Disconnect from netflix, you reconnect again - ultimately the same error (chicagokiwi)
  -Tried to reduce the number of items in the queues to well below the limit of 200 (econcepts)
  -Tried the register / unregister the third wire procedure, no joy (does not break anything else however)
  -Disabled the firewall, no change (econcepts)

  related topics:
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/0c154c0a-1fcb-4353-8c5e-b394e885256d

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/aaab24a0-4BB9-42FA-a5ee-46a733d6560f

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f05f69c7-6456-4117-B302-27c08886ea1e

  Someone else knows Netflix not being is not able to connect?  It started yesterday (30/12/2009) for me.  I looked fine the day before without problem.  The message I get says "there was a problem of data recovery.  Check the works of your internet connection and try again. Ok.  I make it work with both my VMC - one with the service pack and the other without.  My OS updates have been loaded in early December, so I don't see how this could it be.  I searched and found this problem has come up before, but I have not found a solution.  I made NO changes to my HTPC.

  Those who have and solved this problem.

  UPDATE UPDATE UPDATE UPDATE UPDATE UPDATE *.

  2009-01-05 has attempted to start Netflix this morning and you know, it works on both my VMCs.  That's the good news.  So now the real questions are:

  Only 20 people reported it as a problem and only 6 on the green button.  I believe that it affected all the world with Media Center.  So why not discussed much?

  It already happened, causes a stir and silently slips without known cause or cure.  How can we find out what caused this and how to prevent it from happening again in the future?

  *******************************************************************************************

• Desktop Windows Manager is disabled and the theme service is not running. Error 126: the specified module is not found. »

  I tried to install VistaOSX the theme of this site http://vista-os-x.en.softonic.com/. My current theme of vista disappeared and he turned to classic windows. I'm not able to activate Desktop Windows Manager. Error code I get everything by starting the service theme is "Windows could not start the service theme on the local computer. Error 126: the specified module is not found. »

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• Recovery disks won't be finished reinstalling attract the Windows recovery error

  I have a HP pc only to return some malware a few weeks. Tried to remove it and restart got the Startup Repair. Who ran, but received a message that the problem could not be resolved automatically. Tried several times but without success.

  Then I tried the system restore, which seemed to work. It should restart the process and I got a screen that says Windows Recovery error. Gave me a few options but also safe mode start Windows normally. If so start normally, just screen becomes black and hangs there. I tried in safe mode, a list of drivers starts, then stops at crcdisk.sys and I get a box that says that I can't get into safe mode because Windows has not finished the installation.

  Then I tried the HP recovery disks to restore the factory settings. Crossed reinstall it without problems and clicked on Finish to reboot and continue. It goes through the process some, restarts a few times and the final reboot immediately comes the same Windows error recovery screen. I tried several times and made sure the only cool things are the monitor, the keyboard, the mouse and the cord. I also tried to remove one of the memory two sticks and the sound card that is not the original. Memory sticks are original.

  I thought it was the failure of hard drive and bought a new one last nite and was installed. Ran the recovery disks appeared once again, as he worked but got the same error Windows Recovery screen after a reboot.

  Any ideas of what I can do? I can't go in safe mode at all.

  Thank you!

  Edit - I forgot to mention that I have managed to get into the manufacturers menu and delete the original hard drive and tried to do the reinstall, but got the same error.

  Fixed it got! Found the answer in another thread here. It's a problem witht Nvidia Geforce card I have and the DVI output. Think an update or something hit malware but all I had to do was remove the video card, plug a VGA instead of DVI cable and I was able to complete reinstall it! Everything works except the sound now. Trying to get that fixed and reinstall the video card later today.

• Error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery.

  While trying to reinstall Windows 7 on my Dell Inspiron 1545 of the reinstall DVD after you have installed a hard drive again, I got this message: error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery. Tried F10, SHIFT F10 and nothing happened. Then I tried a suggestion of virtual Agent to press F8 to get to advance Boot Options, but this option does not appear! Help!

  For Dell cptrs, you will need to press F12 to access the unique Boot Order Menu(= a temporary setting), little after the Dell logo appears on the desktop. U hv only 5 seconds to do, b4 the cptr will automatically initialize to top with the internal HARD disk.

  ....... F12 is usually used to start the cptr since the DVD player or a plugged in USB-flash drive with a Win 7 install or recovery media.

  To permanently change the boot order, you must similarly press F2 to access the full Boot configuration Menu. The default boot device is the internal HARD drive, but this can be changed to DVD player, USB, disk, network drive, etc. F2 is usually used to start the cptr of an external hard drive(= USB HDD) that contains a bootable Linux operating system.