Recovery media need to reinstall

Similar Questions

• Recovery disk need to reinstall Windows Vista

  original title: need to help restore my laptop and do not have disc for windows vista untimate, how do I do that

  I have windows vista ultimate and need to reinstall operating system but do not have the disc to do this, what can I do, please email me at * address email is removed from the privacy * with a solution to this problem.  My computer is about to crash because of a sort of Trojan horse.  Please notify.

  Hello

  Here are the other ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  or try to remove malicious software

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Reinstall upgrade WIN8 on Satellite L870 - Toshiba Recovery Media Creator

  Hello

  I did the upgrade from WIN 8 on a laptop Toshiba L870-156. The upgrade is OK, but I have no more creative media recovery Toshiba, as the upgrade procedure, said he should be desinstalled before upgrading and reinstalled after the upgrade.

  I have a big problem: where can I find a Toshiba Recovery Media Creator to reinstall?

  In advance thank you.

  Hello

  The Toshiba Recovery Media Creator can be used only with a system pre-installed (in your case of Win 7).
  The recovery media Creator allows you to create pre-installed image recovery disc.

• Re: Equium P300-P6T - double boot, need to reinstall but can't access the recovery

  Hello

  Have a friend s EQUIUM P300-P6T wishing me fix but recovery issues.

  It currently has windows 7 installed on separate partitions WXP can choose which operating system to start when loading. The factory for the laptop is Vista but it has replaced the one with 7.
  However, some of the Vista Boot files are damaged and cannot be mounted by Windows Recovery then resembles a new Vista installation is necessary.

  This should not seem like a problem but:

  (a) I tried holding 0 down as I turn to access the recovery partition (which still exists I see it within the management of the computer if I load xp) but it doesn't do anything, so I can't recover from the recovery partition.
  (b) I tried to reinstall Vista on this partition by using a disk of vista OEM however, when it happens at the stage of "complete installation" the progress bar stays in the same place forever about 3/4 of the way through as if it crashed.
  (c) I managed to get an installation of windows 7 on it, but when I charged it, it does not recognize the keyboard or a touchpad (even if not a problem with the drivers for each), and yet the cursor can be moved with a USB mouse is connected. In addition, the boot partition has now given a choice of "xp", vista, the older installations of windows

  I now put the computer to the original state, it was at the moment. However, the road I want to go down is to use the recovery partition to restore the factory settings on this particular partition and Vista.

  Does anyone have ideas how I can do this, or what is my best solution? As I said, now pressed 0 while starting has no effect yet the recovery partition is still existing on the hard drive.
  Unfortunately there is no recovery media that I have access to.

  Thank you

  Hello

  The whole story is very interesting and I wish I could help somehow. Your ad is quite long with very useful information, but, if I understand you correctly, you want to just install Vista original recovery image. Can you confirm this?
  If you have any other questions please ask one by one, and then we can answer one by one.

  Anyway, if your answer is YES here is my explanation:
  Saved on the HARD drive recovery image can be used with the factory only settings. With other words: when the original recovery image is installed, you will have full access to this recovery image. In the case where some other OS is installed (Win7 or WXP) this original condition will be overwritten and you will lose this recovery option (HARD drive recovery facility). Only way it have factory settings again is to use the recovery DVD disc. If your friend didn't create this disc (without taking into account the recommendation of Toshiba s) that you have big problem now.

  Please tell us once more what are your options now. What do you do now?

• I want to move to solid state HD need to reinstall Windows 8. Is a recovery disk availalable?

  I want to spend my Aspire E1-571 to Solid State hard, so I need to reinstall Windows 8.

  Is an availalable of recovery for download disc image or a physical relocation drive is available at a nominal cost?

  Yes. If you go on store.acer.com, you can go purchace one if you are in the United States or the Canada. If you are outside this area, then you will need to contact technical support in your region for an order.

• Need to reinstall Vista OEM, but don't have the installation media

  I have a virus on my computer and need to reinstall windows vista, but I can't find my intallation disk. In fact I don't know that I had one when I bought the computer. What should I do?

  * original title - I'm not sure that I got a windows vista installation disc, when I bought my computer 3 years ago. Is there anyway I can get a do not pay for it? *

  Hello

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I need a recovery media

  I need a recovery media

  I'm looking for recovery media. How can I go for it?

• I need help reinstall Adobe Photoshop elements 12 and 12 Premium items. I have opaid to these programs, however my computer recently had to be reset through the recovery and they have been erased, any help? The link cat Adobe has me download some thing-bu

  Help. You need to reinstall Adobe Photoshop elements 12 and first 12 items. Both are pre paid programs I had on computer, however, the system had to be reset through recovery and these programs have been erased > given that I have already forked the money for these, I want to use them because I am an artist and need the programs. Please, any help? Ideas?

  You should try to keep the title short and sweet, and put the details in the message... it's a mystery what happened regarding the download link, so here's a few...

  PES 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

  PE 10, 11, 12 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html

• Need a recovery media for mySatellite C850-1NU

  Hello

  I have Ubuntu on my Toshiba Satellite, but I want to put Windows 8 on it. I tried now 0 when I start the computer, but I must have deleted this partition because I wipe the hard drive Assembly later.

  Where can I get drivers and media recovery for her and not the recovery media have?
  Thanks in advance

  Original recovery media can be ordered on https://backupmedia.toshiba.eu/landing.aspx
  Recovery image contains the operating system, all necessary drivers and tools specific to Toshiba and utility.

  After laptop recovery image installation will have factory settings as for the first day after the purchase.

• Need a recovery media for Equium A100 - 549

  Is it possible to have a replacement sent to these machines recovery media or a download as possible?
  Little lost the CD for my partners laptop and its play big time. Thank you for reading this.

  Steve

  Hello

  If you want to order new recovery for your laptop media visit please https://backupmedia.toshiba.eu/landing.aspx

  Good bye

• Need help with the recovery partition/create recovery media

  HI - first thing I did when I got my thinkpad is a clean install of w7, but then I thought about it and restored the recovery partition, conviniently located at the end of the training, in order to create a backup dvd factory. Thing is, when I click the autorun (lenovoqdrive.exe) and select 'create recovery media', I get an error stating that "program files (x 86) \lenovo\factory recovery\recovburncd.exe" is missing... obviously since the operating system partition was crushed.

  I tried RnR and looked on the software + drivers page and nothing happens as "... \lenovo\factory recovery\" when it is installed. So, where can I download the program that creates the recovery discs?

  (I know possible to restore the operating system of the *.wim file but I want to leave that as a last resort).

  Okay here's what I did to who mightve had the same question: as mentioned earlier, I have restored the partition Q with (your favorite free partition recovery tool), then booted from a usb winpe (with imagex) generated from victory aik (free).

  first I deleted (from winpe boot usb) windoze partition with diskpart and recreated the 2 partitions S & C (and Q is on the left) by hand according to 'recovery.ini' found on q. then I restored S and C 'sdrivebackup.wim' and 'cdrivebackup.wim', respectively, using imagex.exe, which is actually two one liners.

  Finally, I tried the bcd to fixation by hand according to "bcdinfo.txt", also found on Q, but that did not really work... so I just jumped into a bootable win7 USB and he rewrote the bcd by itself (I assume). the last step has been fixing the mbr by using /fixmbr and /fixboot bootrec.exe.

  ATM I started just and afaict it behaves exactly like the first start-up of the plant. see you soon

• HP recovery media does not, need to do the second set of recovery on USB media.

  Hello

  I have a new HP Envy laptop that I have created a set of recovery on six DVD media.  These work very well, but are a pain in the end to keep pending next DVD to load.

  So I tried to make another recovery media and place it on a USB key.  Discovered, that it will not allow a second value created.

  So I then ordered and paid for a recovery of HP media.  A beautiful labeled Microsoft USB key came. Great, I thought.

  My laptop because of my fault I failed and wouldn't boot.  So I decided to use my new HP USB stick and after that go into the BIOS and disable the boot from USB stick and start secure etc as he said to it returned with an error that "this computer can not be recovered from this media!"

  I then pluged in my DVD - ROM external and used drive recovery media that I did and it worked perfectly!

  I tried the live chat with a technical person of HP and they checked the serial number and said I got what should work.  They could do a repair ticket and send the laptop.

  It makes no sense to me as I have the unit upwards and running, but I wanted to know how I could get a USB work recovery media.

  I ended up saying goodbye as they were of no help.

  My questions are:

  (1) why this media does not work?

  (2) is it possible to make a second set of recovery media?

  (3) is there a way to transfer my recovery media DVD 6 on a USB?

  OLD POST > I first noticed the order said it was a pn 735088-002 and a sticker outside the wand that has the same number, BUT when he looks at a name on the flash drive is 735088-DB2... >
  

  UPDATE:

  The new USB recovery media came today from HP.   He had again the same top part number that the original order has been 735008-002, BUT this time the corresponding came USB drive name to the tile. 735008-002 , I inserted this new media and it is fully charged.

  Thank you for all your help.

• Need recovery media

  I'm looking for recovery disks for my ENVY 17-1011NR. The unit supplied with Windows 7 64 bit Home Premium edition.

  I am residing outside the United States and cannot buy directly from HP. Regional offices of HP that end were not useful. Can someone please!

  There are third-party provider who are HP partners who sell the recovery media. Search online for one in another part of Africa.

  Good luck!
  ERICO

• Need for basic Windows Vista Home Edition recovery media

  I lost my windows vista home basic DVD. I have my key windows vista with me. can I get a duplicate dvd or can I use another dvd with my cd key?

  Read the info below re borrow a Vista DVD.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• A query need to check whether the database should any recovery media...

  Hello
  
  I'm at the stage of editing a database and still be opened.at this point no matter what query is available or in any other way is there to check whether the database should any recovery media or Instance recovery... ?
  
  My goal is before opening the database, I make sure it's compatible or incompatible, and any form of recovery is necessary.
  
  Thank you and best regards,
  Rameau
  
  Published by: ragu.dba.in on 6 March 2013 12:57 AM

  Hi Lila,

  Use these queries, YVERT should match... no fuzzy file, don't check for recovering files in v$ recover_file... spend sufficient archives & realize the audits before open reset-logs

  set line 900
  set pages 900
  set echo on
  alter session set nls_date_format='dd-mon-yyyy hh24:mi:ss';
  set numwidth 13
  col CHECKPOINT_CHANGE# for 9999999999999999
  col CHANGE# for 9999999999999999
  column error format a10
  column member format a60
  show parameter db_recover
  select * from v$recover_file;
  select file#, status from v$datafile;
  select file#, checkpoint_change#, checkpoint_time, error from v$datafile_header;
  select distinct status from v$backup;
  select distinct  checkpoint_change#  from v$datafile_header;
  select hxfil file_id, fhscn scn, fhthr thread, fhrba_seq sequence, fhsta status from x$kcvfh;
  select distinct fhscn from x$kcvfh;
  select hxfil file_id, fhtnm tablespace_name from x$kcvfh;
  ##### Fuzzy Check ####
  alter session set nls_date_format = 'DD-MON-YYYY HH24:MI:SS';
  set feedback on
  set heading on
  set pagesize 1000
  set linesize 175
  column checkpoint_change# format 999999999999999999999
  select status, checkpoint_change#, fuzzy,
  to_char(checkpoint_time, 'DD-MON-YYYY HH24:MI:SS') as checkpoint_time,
  count(*)
  from v$datafile_header
  group by status, checkpoint_change#, fuzzy, checkpoint_time
  order by status, checkpoint_change#, fuzzy, checkpoint_time;
  

  Thank you
  Ajay more
  http://www.moreajays.com