Recovery of a data file with the size of the different initial file

Similar Questions

• incomplete recovery of a data file.

  I'm performing incomplete recovery of a data file that uses the following scenario.
  SQL > select * v log$;
  shows current journal seq is 10;
  
  I perform dml as follows:
  SQL > update hr.emp set salary = 1000;
  SQL > commit;
  
  Now, I've deleted log archiving with sequence # 9 alongwith users.dbf datafile.
  Now to perform an incomplete recovery of the datafile, users.dbf. I followed the following steps.
  RMAN > the judgment;
  RMAN > bootable media.
  RMAN > run
  {
  until the sequence 9;
  restore data file 4;
  recover datafile 4;
  }
  RMAN > alter database open;
  Now, when I ask about hr. EMP, it shows the updated lines, i.e., salary column has been updated with 1000;
  I want to know that after the incomplete rcovrry until the seq, what other newspapers is applied. My example shows that this newspaper seq 10 has also been applied. Pls help me to improve my understanding.
  I can't understand the reason to get updated when the incomplete recovery lines.

  Hello.

  You cannot perform incomplete recovery of a single data file. After recovery, before opening the database, all SNA must be synchronized between controlfiles, redo logs and data files. A single data file must be restored and recovered to the last SCN for the database to open. If you want / need to do incomplete recovery, always restore ALL data files, recover their until the desired point in time and then open the database with resetlogs synchronize all data with controlfiles and redo logs files.

  In your case, you have made a complete recovery of the data file. Very probably data repeat still available in the online redo logs were used to recover the data at the last CSS file (since you said that you have removed the archiving log - which, incidentally, makes your online backup no need for a full recovery, after the redo logs switch line and crushes with sequence #9 redo log and beyond).

  When experimented with incomplete recovery, until the RCS or at least up to the time, it allows you to specify the point in time recovery with much more accurately and without guessing, what happened in whatever sequence of journal. You must manually remove the files of data or archivelog files before playing with incomplete/complete recovery. In fact, it is a good practice not to delete the database of linked files: o)

  Kind regards
  Martin

• BOOTMGR is missing. Get the message "this version of the system recovery options is not compatible with the version that you want to repair...» »

  Two days to try to solve this problem of complete.  Vista Home Premium (64-bit) has been installed more than 6 months ago.  With the legal copy in the computer, I can choose the repair, it shows me me partition Windows Vista Home Premium.  I don't get the system recovery options, but I get a window that says «the version of the system recovery options is not compatible with the version of windows that you want to repair...» ». I loaded the original drivers for the motherboard.  I started in safe mode, and I can see the different folders.  It tells me that everything is there. Does anyone have a solution for this? I use a product called '360 °' for regular backups, but backups are on a network drive.

  Thanks for the suggestions!

  Here is a link to some people who had the same problem and solved: http://keznews.com/forum/viewtopic.php?f=2&t=20665.  It seems to have something to do with the help of a record of 32-bit with 64-bit recovery (or something of the sort).

  I hope this helps.  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• To use the computer with the different Flight Simulator equipment that is only compatible with 32-bit versions of Windows

  Original title: change the version of Windows

  I have a computer used only for Flight Simulator and is running Windows 7 Home Premium 64-bit.  I want to use the computer with the different Flight Simulator equipment that is only compatible with 32-bit versions of Windows.  Is there a way I can upgrade to Windows 7 64 bit for Windows 10 32 bit and enjoy free upgrade of Windows 10?

  No, the upgrade program will replace existing windows with the same number of bits, 32 to 32 and 64 to 64.

  Even within the same version of Windows, passing from 32 to 64 and vice versa requires a clean installation.

• existing file of data created with the data file name

  Hi Experts
  
  We accidentally created a data file with the same name in the same place
  

  TABLESPACE_NAME           FILE_NAME                                                  FILE_ID STATUS    ONLINE_ size in MB AUT maxbytes in MB
  ------------------------- ------------------------------------------------------- ---------- --------- ------- ---------- --- --------------
  WP_DATA                   /NEXWPLPR/dbase/wpdata/wp_data01.dbf                             8 AVAILABLE ONLINE  32767.9844 YES     32767.9844
  WP_DATA                   /NEXWPLPR/dbase/wpdata/wp_data02.dbf                            12 AVAILABLE RECOVER
  WP_DATA                   /NEXWPLPR/dbase/wpdata/wp_data02.dbf                            11 AVAILABLE ONLINE        1000 NO               0

  on OS lavel
  

  -rw-r-----  1 oracle dba  1048584192 Oct 21 12:44 wp_data02.dbf
  -rw-r-----  1 oracle dba  1048584192 Oct 21 13:09 wp_data02.dbf
  -rw-r-----  1 oracle dba 34359730176 Oct 21 13:10 wp_data01.dbf

  Please suggest how we can solve the problem?
  
  Database: 10g
  OS: linux
  
  Concerning
  Rahul
  Rahul
  
  Published by: 825075 on October 21, 2011 05:25

  One of them is 2 characters at least other two. You have twice ascii code 32, it's space.
  What happens if you run now:

  select file_id,file_name from dba_data_files
  where file_name='/NEXWPLPR/dbase/wpdata/wp_data02.dbf  ';
  

  Notice the 2 spaces at the end.

  Nicolas.

• Data loss with the opening of files the customer CS6 in the clouds

  Installed all recent updates...

  Files the customer cloud version...

  Opened in CS6 with the Error Message "the file '-' was generated by a newer version of Illustrator.» You want to import this file? Data loss can occur.

  A LOSS OF DATA OCCURRED.

  What is going on?

  Rebuilt all of the relevant files related to the program, Mac OS x 10.7.5 cleaned

  All... always referenced the file opens with missing data (colorful box and setting the white guy in two areas on the product)

  Not good legacy import

  Not good feature in the production

  Not good

  Someone needs to open the file in CC and save in a compatible version of CS6. CS6 can open older versions, without data loss, but not the files of CC.

• Live data / problem with the permissions of files

  Just try an old version of Dreamweaver MX 2004. I use my service for server/test remotely webhosting server functions. It is running PHP 4.3.10 and MySQL 3.23.58. I was able to set up the database connection and test - retrieve a recordset with no problems. By following the tutorial, I found that visualized wouldn't work, he just gave me a warning about file permissions be wrong. It turns out that when Dreamweaver creates a temporary file of the work-in-progress to upload to the remote server, the file is created on the server with owner = rw, group = rw, r = world, which explains why it does not-group must be set to group = r. The file is created on the fly and then immediately deleted by Dreamweaver so it is impossible to manually set permissions on the server and probably pretty useless too.
  
  I tried just to save the file and the preview in the browser that forces again to be uploaded to the remote server. The first time, it resulted the browser offering a download of the file box instead to run the page. The reason is - again - that Dreamweaver updates downloaded file permissions to include the Group = rw. If I manually set permission for the group the r = group that it works very well.
  
  It turns out that Dreamweaver always puts the permissions of files on the downloads of files (checked php and html) on the remote server / tests to include the Group = rw. Once I have it placed manually on the remote server / tests to the Group = r for a php file, everything's fine and later additions of the same file do not change it again.
  
  I checked with the Web hosting company and their second line reported back that the default file permission they put on downloaded files includes group = are so DW that causes the problem of definition of group = rw first. I was confirmed using WS - FTP to download the same (renamed) file in the same directory target and the set of permissions were owner = rw, group = r, world = r.
  
  Then
  
  Can someone tell me please how to change permissions that DW sets on the files written on a remote server, because I spent countless hours on it without success. Go looking at other posts in this forum, it could be that other users hit the same kind of problem with DW8

  Specifically, Dreamweaver supports the ability to use a remote server for testing purposes. It seems reasonable to test the site locally using the real remote environment in which it must be applied if the site is not already online.

  It turns out that the problem for me is related to what the remote server and tests of server connection configured to use SFTP. This caused the files created on the remote server to have RW set for the group that has been causing all the problems. When the value to use FTP standard, is very well - prepare file permissions properly when downloading and data online works as expected.

  Another SFTP side effect was that the site FTP log contained the Interline - am added to many of them whenever the remote server has been consulted but no text. On the configuration of the connection to standard FTP log fills up with messages as expected.

• Switch Cisco 2960/3560 = > recovery password and default settings with the button Mode

  Hi Experts,

  I have some confusion with the button Mode with cisco 2960/3560 switches.

  I read on many forums and articles, but where things are not clear.

  a place given 3 seconds and somewhere is given 7 or 10 seconds.

  Qus1), what is the exact time to press/hold Mode button to perform two following tasks:

  A. password recovery (according to my knowledge 3 sec) good or bad?

  Configuration of the switch (start + run) would be safe

  After the recovery of password? Yes or no

  B. factory default (according to my knowledge 10 dry) good or bad?

  I'm afraid, because if I press mode button more than 3 seconds, then

  It will delete any configuration of cisco switch. Yes or no

  Qus2) I want to recover the catalyst 2960/3560 switch password without

  Start/run configuration to lose. That is my main concern.

  Please tell me how to do this, what will be the time keeping Mode buttom

  in a few seconds?

  Qus3) which means this line

  "If the password recovery mechanism is disabled in switch

  then you will lose all the config.

  This sentence has been given on this forum url

  https://supportforums.Cisco.com/thread/140848

  KS

  Attach a terminal or PC with terminal emulation (for example, Hyper Terminal) port console switch.

  Use the following terminal settings:

  • Bits per second (baud): 9600

  • Data bits: 8

  • Parity: None

  • Stop bits: 1

  • Flow control: Xon/Xoff

  Note: For more information on the wiring and connection of a terminal to the console port, refer to connecting a Terminal to the Console Port of Catalyst switches.

  Unplug the power cable.

  The power switch and take it to the switch: command prompt:

  2900XL, 3500XL, 2940, 2950, 2960, 2970, 3550, 3560, and 3750 switches of the series, to do this:

  Press and hold the mode button located on the left side of the façade, while you reconnect the power cable from the switch.

  2960, 2970

  Release the Mode button when the SYSTEM LED flashes orange and then turns green. When you release the Mode button, the SYSTEM LED flashes green.

  3560, 3750

  Release the Mode button after about 15 seconds when the SYSTEM LED turns green. When you release the Mode button, the SYSTEM LED flashes green.

  The system was interrupted before the flash at the end file system initialization

  loading the operating system software:

  flash_init

  load_helper

  boot

  switch:

  Run the flash_init command.

  switch: flash_init Initializing Flash... flashfs[0]: 143 files, 4 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 3612672 flashfs[0]: Bytes used: 2729472 flashfs[0]: Bytes available: 883200 flashfs[0]: flashfs fsck took 86 seconds ....done Initializing Flash. Boot Sector Filesystem (bs:) installed, fsid: 3 Parameter Block Filesystem (pb:) installed, fsid: 4 switch: !--- This output is from a 2900XL switch. Output from !--- other switches will vary slightly.

  Run the load_helper command.

  switch: load_helper switch:

  Question the dir flash: command.

  Note: Be sure to type a colon ":" after the dir flash.

  Appears in the file system of the switch:

  switch: dir flash: Directory of flash:/ 2    -rwx  1803357                  c3500xl-c3h2s-mz.120-5.WC7.bin !--- This is the current version of software. 4    -rwx  1131                     config.text !--- This is the configuration file. 5    -rwx  109                      info 6    -rwx  389                      env_vars 7    drwx  640                      html 18   -rwx  109                      info.ver 403968 bytes available (3208704 bytes used) switch: !--- This output is from a 3500XL switch. Output from !--- other switches will vary slightly.

  Type rename flash: flash: config.old config.text to rename the configuration file.

  switch: rename flash:config.text flash:config.old switch: !--- The config.text file contains the password !--- definition.

  Issue the boot command to boot the system.

  switch: boot Loading "flash:c3500xl-c3h2s-mz.120-5.WC7.bin"...############################### ################################################################################ ###################################################################### File "flash:c3500xl-c3h2s-mz.120-5.WC7.bin" uncompressed and installed, entry po int: 0x3000 executing... !--- Output suppressed. !--- This output is from a 3500XL switch. Output from other switches !--- will vary slightly.

  Enter "n" at the prompt to abort the initial configuration dialog box.

  --- System Configuration Dialog --- At any point you may enter a question mark '?' for help. Use ctrl-c to abort configuration dialog at any prompt. Default settings are in square brackets '[]'. Continue with configuration dialog? [yes/no]: n !--- Type "n" for no. Press RETURN to get started. !--- Press Return or Enter. Switch> !--- The Switch> prompt is displayed.

  At the switch prompt, type en to enter a mode.

  Switch>en Switch#

  Password recovery

  Type rename flash: config.old flash: config.text to rename the configuration file with its original name.

  Switch#rename flash:config.old flash:config.text Destination filename [config.text] !--- Press Return or Enter. Switch#

  Copy the configuration file in the memory.

  Switch#copy flash:config.text system:running-config Destination filename [running-config]? !--- Press Return or Enter. 1131 bytes copied in 0.760 secs Sw1#

  The configuration file is now reloaded.

  Replace the current passwords that you do not know. Choose a password with at least one capital letter, one number and one special character.

  Note: Replace passwords that are required. You must crush not all passwords listed.

  Sw1# conf t !--- To overwrite existing secret password Sw1(config)#enable secret !--- To overwrite existing enable password Sw1(config)#enable password !--- To overwrite existing vty password Sw1(config)#line vty 0 15 Sw1(config-line)#password Sw1(config-line)#login !--- To overwrite existing console password Sw1(config-line)#line con 0 Sw1(config-line)#password 

  Write the running configuration in the configuration file with the write memory command.

  Sw1#write memory Building configuration... [OK] Sw1#

  For factory reset:

  do not give under the control of factory reset

  Switch#copy flash:config.text system:running-config

  can I copy the running configuration to Flash

  Switch flash running-config #copy:

  Destination file name [running-config]?

  Building configuration...

  [OK]

  Switch #copy running-config startup-config

  Name of destination file [startup-config]?

  Building configuration...

  [OK]

  Review the link for more information below

  http://www.Cisco.com/en/us/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml

  Please note the useful messages.

  Concerning
  Vesta
  "Everybody is genius." But if you judge a fish by its ability to climb on a tree, he will live his entire life, believing that this is stupid. "

• Recovery disks do not work with the new hard drive?

  Hello, everyone.

  I have a laptop HP (pavilion dv7-1245dx) and the hard drive is dead. I had never gotten to burn my recovery disks, so I ordered new ones from HP. When I installed the new hard drive and popped in the disk to reinstall the operating system, it gave me the error message:

  "This PC is not supported by the system recovery discs. You can continue to recover this system with these discs. »

  Error code: 0100-30 FC-3602-3603

  The original hard drive was a Hitachi, 320 GB SATA

  The new hard drive is a WD 500 GB SATA

  Any assistance anyone can give would be great. :]

  Thank you for your time,

  C

  EDIT: Trying to recover a Vista operating system

  For anyone who has the same problem, I found a solution. I cloned the original hard drive using the Clonezilla fallback option. After using Clonezilla to image on the new hard disk, the partition which held that most of the data of the laptop is not mountable, however the partition containing the restore partition was a perfect copy. I turned on the computer, hit escape to access the menu (for a list of options such as boot order, etc, which included an option for recovery), and then choose recovery option. While the recovery discs, I received from HP refused to work with the new hard drive, the Vista restored cloned recovery partition without flaw.

• Advice on setting up multiple data sources with the health without double counting application.

  Someone has any advice on putting in place several sources of data with the application of health... and how to ensure that you are not double count data.

  I use an iPhone OS on 9.3.1 (my first iphone never). I use map my walk for specific tours. Garmin vívosmart HR for general steps, heart rate and sleep; and a balance of inside. I think that the iPhone itself also some general measures.

  Thank you

  Anthony

  The health app manages all the automatically.

• Windows 8 - recovery disks do not work with the new hard drive

  My HDD had major errors of io only 1 month laptop warranty. I can't clone the original disc, its dead. I'm relatively new to Win8 but I bought the factory HP recovery disks for my model and have tried repeatedly to restore the OS win8 without success even after support technical advice ofHP and several friends with more experience than me (and I got an A + cert for more than a decade)-I have no idea why he keeps fails. I ordered another set of discs and tried another new hard drive. The log shows all the hardware in the way and a sysprep not found error at the end. What Miss me?

  Problem solved! After another half-dozen recovery more attempts and lose more money on a new HP certified hard drive with the correct part number, I decided to give up Windows 8 and turn this laptop in a Hackintosh, I now on Mac OS X!  Microsoft has gone too far now, only not with the security of windows, instead of trying to make sure they get every penny they can from each PC running windows. His self defeat really. Those who cannot or do not want to pay the cost will simply find an alternative. I'm just tired of the headaches and of constantly having to spend my precious time proving that I have a valid OS license for every computer that I've updated or repair. Forcing people to buy the same item several times is aggravating and false. Sorry, just fan frustration.

• 2 channels of AI on a data acquisition with the range of different sensitivity

  This vi is based on the 'new project' state machine on the home screen at the start of LV.

  A time loop is parallel to the main loop of the state machine, shown in the picture.

  It works continuously until you press the Exit button.

  The problem seems to be in start this... > read >... stop start > read >... stop along the error line.

  The reason for this clumsy arrangement power is measured voltages are in two lines of different sensitivity.

  The shunt voltage is small and needs-. 2 to the range of V.2. The load voltage is greater and 09:50 V range is good.

  In the initializing state, two separate vi 'create a channel' have been used to specify the range of voltage to the physical channel. The corresponding tasks are sent via via local variables.

  DAQmx errors happen randomly, sometimes the first iteration, sometimes the 50th.

  I tried to disable one or the other start > read > stop for the shunt voltage or load.

  I tried replacing them with the DAQ assistant.

  I tried various DAQmx vi: "wait" and "accomplishment of the tasks by resource cancel selected".

  But error-50103 "specify resource is reserved" keeps popping up.

  Is it possible to create two tasks on the device even when they are not used at the same time?

  The only reason is to measure in two voltage ranges.

  Win 7 Pro 64-bit

  2014 LV database

  Data acquisition equipment: USB-6210

  Thank you.

  This has been discussed many times. Do NOT use separate tasks. You can use different ranges for different channels with a single task. Just wire the task from one channel to another channel to create task.

  You also use local variables when they are certainly not needed.

• Error with data sent with the submission of VISA

  Hello

  I try to communicate with a microcontroller that needs these data 0 x 01 0x2A 0xFF 0xFF 0xFF 0xFF 0xFF 0x0D to begins to send back data.

  So, I thought to check the data to pass to the microcontroller in Labview by making a loop back (by short-circuiting pins 2 and 3 of the serial port).

  I send you the 0 x 01 0x2A 0xFF 0xFF 0xFF 0xFF 0xFF 0x0D but the VISA of the read value is 0xFF 0x0D 0 x 01 0x2A 0xFF 0xFF 0xFF 0xFF different from the one I sent the data that makes me unable to communicate with the microcontroller.

  As shown here

  

  Can someone help me understand this issue.

  Thank you.

  
  

• Filtering the data names with the prefix donotuse store

  Hi all

  Currently, we are conducting PowerShell command using the cmdlet Get-data of the below automation tool store. The request is to give the number of logical unit available in the cluster. But we need to edit the script even to retrun lun without donotuse in his name.

  New-VIProperty-name availableMB - value-Datastore-ObjectType {$ds = $args [0]; $sum = 0; if ($ds.} ExtensionData.summary.uncommitted - gt 0) {$sum = $ds. ExtensionData.summary.uncommitted}; $sum = $ds. ExtensionData.summary.freeSpace - $sum;  $sum = $sum/1024/1024; Return $sum} - Force

  (Get-Cluster-name ${vCenterCluster} |) Get - VMhost) | Where-Object {$_.availableMB - ge (${diskSize} * 1024 + ${reservedSpace} * $_.)} CapacityMB) - and $_. CapacityMB - ge (${lunSize} * 1024)- and $_. {Name: like "* _lun *"} | Sort-Object availableMB | Select - 1 first

  Please provide your inputs.

  For example: If there is one named xxxx_lun01donotuse or donotusexxxx_lun01 we do not want this lun to be returned by the script.

  Thanks and greetings

  Riyas Hussain has

  Far as I can tell you are not feeding datastore objects to the Where clause, so you cannot test on the properties of the data store in the Where clause.

  You can feed the objects produced by Get-data store to the Where clause (see my previous answer)

• CD opens with the different title and songs

  I ripped a commercial CD of songs to my PC.  I was editing some info on the CD and went to the Internet for CD cover which did not appear on the CD.

  Unfortunately, she finds a different CD with a similar name and I accidentally applied the change to the CD.   I deleted the CD in the directory of music, to include the ripped files.

  Now, when I insert the CD, it always comes with the fake title and song list.  How can I remove the list of title and the incorrect CD song that is recognized by the media player?

  Thank you

  Stan

  There are loads of these compilations, and sometimes the metadata service used by WMP cannot identify them. However, if the titles found correctly tracks when you ripped the disc first you should be able to find them by the method I suggested... otherwise it would be down to manually fix. I had to do it once with the second disk of a game... Disc1 was beautiful but Disc 2 was completely false.

  Subject of the work - if you ever have this problem again seek work in "Google Images". This way you get just the album art and no other associated disk information. Which can be copied and pasted directly on the album icon in WMP. (If you still see information being changed some of your settings in the options of WMP box may change) Cheers - Ric.